Logical System not appearing in SLD

Hello Friends,
Logical System of SAP R/3 system is not appearing in SLD. The logical system is available in backend ABAP System. I have even run the RZ70 data collection programs as well. However, I am not able to populate the logical system names in SLD.
I have put the same logical system names in the client tab of the technical system but in vain. The logical system field is non-editable and I believe it is always non-editable unless some technical system is not assigned to it.
The logical system name is also not available in ID (if it is not in SLD then it won't be in ID as well).
[The SLDCHECK is throwing exception 4. what to do for this? May be the data is not transfered because of this? Even though I have maintained proper password in SLDAPICUST!!!]
Request your kind adivse on what can be done. Where can I lookout for possible errors.
Thanks & Regards,
Anand Patil

Hi
On SLD - > Technical System -> Client -> Logical System Name , generally It is Editable entity .
If in Your Case , You can not change it, chech with ut basis Guy , for roles and authorisation against your Username ,
Check the Same SLD Roles with some PI Service User.
Regards
Prabhat Sharma.

Similar Messages

Logical system missing in PI SLD

Hi,
The problem I facing currently during transport of SAP business system from Dev to Quality system, logical system is missing in the Adapter Specific parameters.
The actual problem I have seen in the SLD, the logical system is a blank and even after I pushed from RZ70.
Can you please suggest me how could i retrieve the Logical system in the SLD by automatically.
Thanks in advance.
Best Regards,
Sateesh

Hi Sateesh,
Please check the following links for similar issue , if it helps:
Logical system of PI in SLD
Logical system name in SLD for the R3 buss. system is not open for input.??
Logical System Name Not appearing in the Business System
Also, you can enter the Logical Name in the SLD, for the related TS / BS.
Regards,
Azhar

Logical system not updated in the business system adapter specific data par

Hello Guys,
I changed a logical system name in the sld for a business system and that that is not reflected in the Integration directory adapter specific data tab.
I did a cache refresh using :
1) sxi_cache --- Full cache refresh, delta cache refresh
2) Hard cache refresh
3) In ID "Cleared SLD data cahe "
4) Refreshed the exchange profile
But no use
Can you please tell how i can get the logical system name for the business system updated in the Integration Directory.

When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
Run the cache in the ID are there any errors there?
check the RWB cache monitoring is everything green there?

Logical system not defined in table SMOF_ERPSH!

Hello,
In the inbound queue of CRM, the queues are in 'SYSFAIL' status. The error message is ' logical system not defined in table SMOF_ERPSH!' .
the table has an entry for relevant ERP system.
I dont know where else to check.
I have checked the logical destinations on CRM and it is defined correctly.
can anyone help me here.
Regards,
Pratima

Hi Pratima,
I am also facing the same issue. I checked all the entries and Entries are there in the respective tables but still the same issue.
But if I delete the queue, the changes are replicated for that time but after some time again the queues are getting blocked with the same issue.
Pratima, can you please tell you whether your issue got fixed on this.
Thanks,
Sharath.

Error-logical system not created in client 001

Hi Experts,
When I was trying to delete the application from Administration Client its giving me the error "Logical system not found on client 001"
I created the Logical system in 001 but still same problem...
Did I do anything wrong during the installtion??
Can anyone please help me
Bobby

Hi Experts,
I get the same error "Logical system not created in client 001"when I try to delete the appset from backend using program UJS_ACTIVATE_CONTENT...
Please suggest..
Thanks
Bobby
Edited by: bobbydon on Jul 7, 2010 7:46 PM

Business Systems not appearing in the Integration Builder (Configuration)

Hi Experts,
I have created new business systems in the Integration Builder of my PI System.
This is not appearing in the Integration Builder.
I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
Thank you.
Thanks
Kasee

Business system from SLD not visible in Integration Directory

Problems with CIF (Logical system not assign to BSG)

Hello,
We are sending all master data from ECC to APO. We set up the CIF in DEV and all worked fine. But when we try to send the data from ECC to APO in QA an error appears. It says that the logical system is not assign in the BSG. Apparently the configuration that we have in DEV is the same that we have in QA. The logical systems in all instances (DEV & QA) have the same name. Could this be the problem?
Thanks,
David

Hi David,
1) Check whether BSG is defined in customisation under the below
link
SAP - Implementation Guide > Integration with SAP Components
     > Integration via APO Core Interface (CIF)    >
    Basic Settings for Creating the System Landscape   > Maintain Business System Group
2) Check the BSG is assinged to the logical system under the
spro transaction
SAP - Implementation Guide > Integration with SAP Components
     > Integration via APO Core Interface (CIF)    >
    Basic Settings for Creating the System Landscape   >
Assign Logical System and Queue Type
3) Check BSG is showing in APO material master for a location
product under "Properties" tab.
Regards
R. Senthil Mareeswaran.

Logical System not maintained

Dear Experts,
I need to generate JVRD condition idoc using FV13 for a new site for some articles.JVRD condition is maintained in SAP.But when i try to send the condition type using the above t-code it generates no Idoc and shows me the message
Segment is not intended for reciever LS_E111. However for other stores its running f9.Do i need to maintain or define Logical System 'LS_E111' some where for this new site? I hv already checked in WE20 for partner profile .Pls help

Hello,
I'm not familiar with JVRD. Have you checked the receiver port in WE21 and SM59? You can find the receiver port in WE20 outbound parameters
Regards,
Michael

Logical system not seen in ID (7.0)

Dear XI experts,
i defined in SLD a logical system as application system (SAP BACKEND)to send and receive IDOCS.
I am trying to assign a Business system in the ID which I defined in the SLD and cant seem to find this in the ID.
What must have I missed while defining the Business system or Technical sysetm?
Perhaps some step information could help for PI 7.0.
Thanks

hi,
have a look at my blog:
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

Technical Systems Not Reflected in SLD

Hi Experts,
Good day.
We are configuring administrative SLD as part of NWA setup in Solman dual stack as per Monitoring Setup Guide Netweaver 7.0 SPS 16. We have a separate productive SLD in XI.
As per the document, we need to have the data from XI forwarded to our Solman system. We have completed required settings in SLDAPICUST, RFC connections, JCO RFC Provider and SLD Data Supplier, added new data supplier bridge in XI pointing to our Solman system and afterwards, triggered data transfer from XI through RZ70 and SLD Data Supplier which is successful.
However, only the ABAP and Java stack of our solman gets reflected in our administrative SLD.
Via transaction SLDCHECK from ABAP, we're getting the following error:
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call returned exception code 3
Access to the XI Profile is currently disrupted.
From XI SLD logs, we have the following error:
#21 08/12/2009 14:49:46.531 [Thread-38] WARNING com.sap.lcr.sagent.BuilderDirector: Warning: SLD target system http://<host>:<port>/sld not available (incoming data will be ignored).
Thrown:
com.sap.lcr.api.cimclient.CIMClientException: Received response is not a CIM Operation Response! Check "http://<host>:<port>/sld" is the correct URL for the SLD CIM Object Manager and that user "User***" has access to the SLD via http.
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:434)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:581)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:195)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:147)
at com.sap.lcr.api.cimclient.CIMOMClient.getCIMClass(CIMOMClient.java:538)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1185)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1196)
at com.sap.lcr.api.cimclient.CIMClient.ping(CIMClient.java:290)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:645)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:545)
at com.sap.lcr.sagent.BuilderDirector.run(BuilderDirector.java:459)
Thanks in advance for your inputs.
Best Regards,
Jen

Joel,
Please upgrade your SLD Data Model and CR and then see if that makes difference.
Also check Link:[Note 954820 - Compatibility of SLD in the system landscape]
Thanks,
Digesh Joshi

AS ABAP System not visible on SLD

Hi Gurus,
We have newly installed a CRM 2007 system (QA) and completed most of the post install activities. We have the requirement of connecting an XI system to the CRM system, and we are trying to configure the SLD. Here we are facing a wierd error. The AS ABAP technical system which is supposed to automatically show up on the SLD, is not seen. The AS JAVA technical system is seen but some details are wrong. Some explanation of the current scenario.
1. Our SLD system is a central system, on which the SLDs of all the systems are maintained.
2. I have maintained the PIAPPLUSER password in T-Code SLDAPICUST. This ID also exists in the XI system.
3. I have executed the T-Code SLDCHECK, and it does not show any error execpt that Business system is missing. I could not create the same as the Technical system is still missing.
4. In T-Code RZ70, I selected all the options, and clicked on activate.
5. I also checked the data in the SLD Data Supplier in the VA of the CRM system, and found all the data to be consistant. I also triggereed the data transfer to the SLD.
Could anyone please help me out in getting the AS ABAP Technical system automatically? Any extra configs I need to do to set this thing right?
Thanks & Regards,
Savan D.
Edited by: Savan Kumar Dundoo on May 19, 2008 7:59 AM

Have you checked [SAP Note 1115244|https://service.sap.com/sap/support/notes/1115244]?
Peter

Event trace error: own logical system not defined ?

Hello,
i am trying to start a workflow when the status of a document changes to "completed". I was checking the event trace with transaction code : "SWEL" and i found out that the workflow is trying to start but there is some kind of error and the event trace is saying :
Your own logical system has not been defined for this client. Most of the ALE functions therefore cannot be used. No links can be written.
Any suggestiobns on what can be the problem ?
points are awarded
Regards

Sounds like you need to setup your client as a logical system, to do so..
To do setup the Logical System follow the following steps
In IMG Settings
Cross Applications -> Distribution (ALE) -> Basic Cofiguration.
Set up Logical System -> Maintain Logical System.
Create New Entries

Distribution system for logical system not correctly maintained

Im logged in into SAP R/3 system. When starting transaction POIT I chose "production orders for".
I fill in the fields for
Plant -> 001
Material -> T-HV200 (Ice Mix)
At the top I have to enter a "optimization system".
I chose the logical system I created (CE6CLNT850) from a list.
After I hit the execute button it says:
"Distribution system for logical system CE6CLNT850 not correctly maintained."
The distribution model for CE6CLNT850 (transaction: BD64) looks like this:
Componentsystem CE6 SAP R/3 4.6c----
CE6CLNT850
NX7CLNT800----
NX7CLNT800,No Short text exists
LOIPRO----
Production order
What is the problem here?
And by the way, WHY DO I HAVE 479 entries in my list of logical systems when I'm trying to chose the "optimization system"???
best regards,
Lunatikk

Thanks for your answer,
the RFC destination is configured correctly. It says that the connection works when I run the test.
I'll post it in an other forum as you suggested but I have another question:
You said that it is possible to have 474 logical systems configured on the system.
1. Who defined those systems and why?
I am the first one in my company using this system.
We ordered to a SAP system through RAC Service.
I thought we would get a "fresh installation" of the SAP system -
2. please correct me if I'm wrong.
For example there are logical systems with names like "boon software" and "camstar", which are real companies.
There aren't just logical systems configured, there are also additional RFC destinations, distribution models and ports that were there from the beginning.
3. Is it possible that those logical systems interfere with the sending of the IDOC. Could it be possible?

Systems not appearing/Cannot search for systems

Greetings,
I have defined two systems that call BAPI's (via RFC) on an instance of SAP that we utilize for testing. Using Visual Composer 7.0, we were able to use the "Find Data" option to search our portal instance for systems, but this feature does not seem to be present in the CE 7.1 version of VC.
We were initially trying to migrate the Visual Composer iViews that we created from our 7.0 portal to our CE 7.1 portal. We defined these two systems in the portal and assigned the correct permissions and connection strings before performing the migration. The migration wizard in VC asked us to define the new system names, but the dropdown box that is supposed to contain the defined systems was empty.
My questions are...
1. Even though we've defined the systems in CE 7.1, why are they not appearing during the migration process as options?
2. In VC 7.1, the search function does lot list systems as an option. I have tried searching all of Portal Content, but no systems appear in the results. How do I search for systems defined in the portal so that I can define a data source?
Thanks and I appreciate your help.
-= Michael

Hi Michael,
first of all the connection to an ABAP system via portal system object as you have used it in VC7.0 should also work in VC7.1. Maybe there is an issue with your configuration. There is also another option to setup the connection via RFC connection in the SAP NetWeaver Administrator. Anyway I suggest that you try to establish a connection via RFC, which is described in the [Wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc71/rfc+destination]. If this connection will work then you should investigate why the connection via system portal system object is not working.
Please let me know if you have success with the RFC connection.
Best Regards,
Marcel

Technical System not appearing while creating Business System

Hi
We had already created business system and assigned a technical system and all the interfaces was working fine.
Now we removed the technical system and created a new technical system, since we need to point to different server.
I created a new technical system, oped the old business system and in integration tab, when i click on change technical system.
The newly created technical system is not appearing.
Thought of assigning the business system directly in technical system, but it is not allowing and i am getting message business system is already assigned.
Can you pls help
Regards
Madhan D

Hi Madhan,
When you create a Business System, it will ask for the type of Technical system like Web AS ABAP, Web AS Java etc.
So, the new TS type should match the TS type you selected for your BS so that you can see your TS in the dropdown, when you click on "Change" link.
HTH,
GP

Logical System not appearing in SLD

Similar Messages

Maybe you are looking for