Logical System not maintained
Dear Experts,
I need to generate JVRD condition idoc using FV13 for a new site for some articles.JVRD condition is maintained in SAP.But when i try to send the condition type using the above t-code it generates no Idoc and shows me the message
Segment is not intended for reciever LS_E111. However for other stores its running f9.Do i need to maintain or define Logical System 'LS_E111' some where for this new site? I hv already checked in WE20 for partner profile .Pls help
Hello,
I'm not familiar with JVRD. Have you checked the receiver port in WE21 and SM59? You can find the receiver port in WE20 outbound parameters
Regards,
Michael
Similar Messages
-
Logical system not defined in table SMOF_ERPSH!
Hello,
In the inbound queue of CRM, the queues are in 'SYSFAIL' status. The error message is ' logical system not defined in table SMOF_ERPSH!' .
the table has an entry for relevant ERP system.
I dont know where else to check.
I have checked the logical destinations on CRM and it is defined correctly.
can anyone help me here.
Regards,
PratimaHi Pratima,
I am also facing the same issue. I checked all the entries and Entries are there in the respective tables but still the same issue.
But if I delete the queue, the changes are replicated for that time but after some time again the queues are getting blocked with the same issue.
Pratima, can you please tell you whether your issue got fixed on this.
Thanks,
Sharath. -
Error-logical system not created in client 001
Hi Experts,
When I was trying to delete the application from Administration Client its giving me the error "Logical system not found on client 001"
I created the Logical system in 001 but still same problem...
Did I do anything wrong during the installtion??
Can anyone please help me
BobbyHi Experts,
I get the same error "Logical system not created in client 001"when I try to delete the appset from backend using program UJS_ACTIVATE_CONTENT...
Please suggest..
Thanks
Bobby
Edited by: bobbydon on Jul 7, 2010 7:46 PM -
Distribution system for logical system not correctly maintained
Im logged in into SAP R/3 system. When starting transaction POIT I chose "production orders for".
I fill in the fields for
Plant -> 001
Material -> T-HV200 (Ice Mix)
At the top I have to enter a "optimization system".
I chose the logical system I created (CE6CLNT850) from a list.
After I hit the execute button it says:
"Distribution system for logical system CE6CLNT850 not correctly maintained."
The distribution model for CE6CLNT850 (transaction: BD64) looks like this:
Componentsystem CE6 SAP R/3 4.6c----
CE6CLNT850
NX7CLNT800----
NX7CLNT800,No Short text exists
LOIPRO----
Production order
What is the problem here?
And by the way, WHY DO I HAVE 479 entries in my list of logical systems when I'm trying to chose the "optimization system"???
best regards,
LunatikkThanks for your answer,
the RFC destination is configured correctly. It says that the connection works when I run the test.
I'll post it in an other forum as you suggested but I have another question:
You said that it is possible to have 474 logical systems configured on the system.
1. Who defined those systems and why?
I am the first one in my company using this system.
We ordered to a SAP system through RAC Service.
I thought we would get a "fresh installation" of the SAP system -
2. please correct me if I'm wrong.
For example there are logical systems with names like "boon software" and "camstar", which are real companies.
There aren't just logical systems configured, there are also additional RFC destinations, distribution models and ports that were there from the beginning.
3. Is it possible that those logical systems interfere with the sending of the IDOC. Could it be possible? -
Logical System not appearing in SLD
Hello Friends,
Logical System of SAP R/3 system is not appearing in SLD. The logical system is available in backend ABAP System. I have even run the RZ70 data collection programs as well. However, I am not able to populate the logical system names in SLD.
I have put the same logical system names in the client tab of the technical system but in vain. The logical system field is non-editable and I believe it is always non-editable unless some technical system is not assigned to it.
The logical system name is also not available in ID (if it is not in SLD then it won't be in ID as well).
[The SLDCHECK is throwing exception 4. what to do for this? May be the data is not transfered because of this? Even though I have maintained proper password in SLDAPICUST!!!]
Request your kind adivse on what can be done. Where can I lookout for possible errors.
Thanks & Regards,
Anand PatilHi
On SLD - > Technical System -> Client -> Logical System Name , generally It is Editable entity .
If in Your Case , You can not change it, chech with ut basis Guy , for roles and authorisation against your Username ,
Check the Same SLD Roles with some PI Service User.
Regards
Prabhat Sharma. -
Problems with CIF (Logical system not assign to BSG)
Hello,
We are sending all master data from ECC to APO. We set up the CIF in DEV and all worked fine. But when we try to send the data from ECC to APO in QA an error appears. It says that the logical system is not assign in the BSG. Apparently the configuration that we have in DEV is the same that we have in QA. The logical systems in all instances (DEV & QA) have the same name. Could this be the problem?
Thanks,
DavidHi David,
1) Check whether BSG is defined in customisation under the below
link
SAP - Implementation Guide > Integration with SAP Components
> Integration via APO Core Interface (CIF) >
Basic Settings for Creating the System Landscape > Maintain Business System Group
2) Check the BSG is assinged to the logical system under the
spro transaction
SAP - Implementation Guide > Integration with SAP Components
> Integration via APO Core Interface (CIF) >
Basic Settings for Creating the System Landscape >
Assign Logical System and Queue Type
3) Check BSG is showing in APO material master for a location
product under "Properties" tab.
Regards
R. Senthil Mareeswaran. -
Event trace error: own logical system not defined ?
Hello,
i am trying to start a workflow when the status of a document changes to "completed". I was checking the event trace with transaction code : "SWEL" and i found out that the workflow is trying to start but there is some kind of error and the event trace is saying :
Your own logical system has not been defined for this client. Most of the ALE functions therefore cannot be used. No links can be written.
Any suggestiobns on what can be the problem ?
points are awarded
RegardsSounds like you need to setup your client as a logical system, to do so..
To do setup the Logical System follow the following steps
In IMG Settings
Cross Applications -> Distribution (ALE) -> Basic Cofiguration.
Set up Logical System -> Maintain Logical System.
Create New Entries -
Logical system not updated in the business system adapter specific data par
Hello Guys,
I changed a logical system name in the sld for a business system and that that is not reflected in the Integration directory adapter specific data tab.
I did a cache refresh using :
1) sxi_cache --- Full cache refresh, delta cache refresh
2) Hard cache refresh
3) In ID "Cleared SLD data cahe "
4) Refreshed the exchange profile
But no use
Can you please tell how i can get the logical system name for the business system updated in the Integration Directory.When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
Run the cache in the ID are there any errors there?
check the RWB cache monitoring is everything green there? -
Error in IDES while cratimg PO - Logical system not defined
Hi,
While creating PO in IDES , system is giving following error ,
"Logical system is not defined"
Pl suggest the solution,
Thanks a ton in advance,
NBHi
in BD54 Check have u defined logical system for client 800
for more details post ur prob. in SAP NetWeaver forum
Vishal... -
Hi Guys Can some one tell me how to switch our sytems to maintained. When I go into system data maintenance through the web browser and click on a system I do a consistancy check and the systems comes back as not maintained. What do I have to do to get this to a maintained state?
Thanks MikeHi Mike,
Check all SAP-OSS rfc is working or not. Give you proper admin s000* user id and password in login details. RFCs are SAP-OSS and SAP-OSS-LIST-O01, not SAPOSS, SDCC_OSS and SAPNET_RTCC. Then update data.
Second option, manually you can enter service.sap.com and maintain you system data manually.
Hostname, ip address etc.
Thanks,
Suman -
Logical system not seen in ID (7.0)
Dear XI experts,
i defined in SLD a logical system as application system (SAP BACKEND)to send and receive IDOCS.
I am trying to assign a Business system in the ID which I defined in the SLD and cant seem to find this in the ID.
What must have I missed while defining the Business system or Technical sysetm?
Perhaps some step information could help for PI 7.0.
Thankshi,
have a look at my blog:
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ -
Logical system not defined.
Hello
Can some body help me to identify the issue which gives me an error,No Logical system for FI is manitained .
This error, I receive at the time of approving shopping carts.
Thanks.
Jayawant GokhaleHi,
Pls refer the foll threads:
PO transfer from SRM to vendor system
PDP issue - ext reqts missing in SRM system
External system to SRM
Re: Upload PO from XML file in SRM
BR,
Disha.
Pls reward points for useful answers. -
PORDCR102 - Logical system not updated in EKKO
Hi,
I am using idoc PORDCR102 to create Purchase Orders.
The PO is created successfully but the LOGSY field in EKKO table is not updated with the value from field LOGSYSTEM in the header segment of the IDOC.
Kindly do the needful.
Thanks in advance.When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
Run the cache in the ID are there any errors there?
check the RWB cache monitoring is everything green there? -
Local logical system is not defined
Hello
We are trying to setup a logical system - created or defined the logical system
when we try the BD64 it gives out the error "Local Logical system not defined"
I am using ECC 6 version
IS there any way to bypass and do the setup ?HI Anil,
Best Methodology for creating a RFC Destination that also includes setting up <b>Logical System</b> is:
<b>Use Transaction -> SALE /b]
1) <b>Define Logical system :</b>
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Logical System -> Define Logical System
<b>
2) Assign Client to Logical system:</b>
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Logical System -> Assign Logical System to Client
<b>3) Create RFC Destination: T-CODE (SM59)</b>
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Communication -> Create Rfc Connection
Follow steps in sequence. Hope it answers every thing.
Cheers,
*RAJ*
*POINTS IF FOUND HELPFULL* -
Logical Path not defined..?
Hi,
I recently got CRM 5.0 installed on my system. Very first step of 'Maintain Business Partner' it says, 'Logical Path not defined'.
Tried to open activities, says' Logical system not defined'
Please suggest what is the problem & how to rectify this.
A prompt reply wil be highly appreciated.
Thanks
AnilHi ,
You need to Define Logical System for your System to Allow you to Execute Actions
Path:SAP Web Application Server>Business Intelligence>Links to Other Source Systems>General Connection Settings::
In this step, you can define the logical systems in your distributed system.
Caution:Logical systems are defined cross-client.
Activities
1. To create a logical system, choose Edit -> New Entries.
2. Enter a name for the logical system that you want to create.
3. Enter a description of the logical system.
Enter the Logical System that you are using,
These Links may Further Help up for Details:
http://help.sap.com/saphelp_crm50/helpdata/en/b4/b0b13bb3acef3ce10000000a11402f/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/55/38e74110cf0b7fe10000000a155106/frameset.htm
Hope it Answered your Queries..
Thanks and Regards,
RK.
Added Links for Further Help: RK on Mar 5, 2009 12:07 PM
Maybe you are looking for
-
Can't access shared library to import. Why?
When trying to access sharing, library will not come up in iTunes so that it can be imported. Can anyone tell me why?
-
Is there a way to create folders on one iPad and sync the folders to multiple iPads?
Is there a way to create folders on one iPad and sync the folders to multiple iPads? I have 23 iPads and I want to have all the folders match for easier access for students.
-
MV50AFZ1 - Change Accounting Document During PGI
Using MV50AFZ1 User - Exit ,can i change accounting document during PGI.I want to change the Business Area. If not ,please tell me which User Exit can help me in this. Thanx, Viru
-
Blank pages loaded in safari for managed users
I just upgraded to Mountain Lion from Lion on my new macbook air. My kids account is a managed account. Safari worked fine under lion with their account. Now under mountain lion most pages like yahoo.com load up blank. Other pages that do work ar
-
http://www.flexgrocer.com/categorizedProducts.xml http://www.flexgrocer.com/category.xml Site removed, well... can you tell where found these files in Adobe Press publication of Flex 4 TFS VOL.1 Labriola,...2010(c), is the old edition...???