Logical system not seen in ID (7.0)

Dear XI experts,
i defined in SLD a logical system as application system (SAP BACKEND)to send and receive IDOCS.
I am trying to assign a Business system in the ID which I defined in the SLD and cant seem to find this in the ID.
What must have I missed while defining the Business system or Technical sysetm?
Perhaps some step information could help for PI 7.0.
Thanks

hi,
have a look at my blog:
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

Similar Messages

Logical system not defined in table SMOF_ERPSH!

Hello,
In the inbound queue of CRM, the queues are in 'SYSFAIL' status. The error message is ' logical system not defined in table SMOF_ERPSH!' .
the table has an entry for relevant ERP system.
I dont know where else to check.
I have checked the logical destinations on CRM and it is defined correctly.
can anyone help me here.
Regards,
Pratima

Hi Pratima,
I am also facing the same issue. I checked all the entries and Entries are there in the respective tables but still the same issue.
But if I delete the queue, the changes are replicated for that time but after some time again the queues are getting blocked with the same issue.
Pratima, can you please tell you whether your issue got fixed on this.
Thanks,
Sharath.

Error-logical system not created in client 001

Hi Experts,
When I was trying to delete the application from Administration Client its giving me the error "Logical system not found on client 001"
I created the Logical system in 001 but still same problem...
Did I do anything wrong during the installtion??
Can anyone please help me
Bobby

Hi Experts,
I get the same error "Logical system not created in client 001"when I try to delete the appset from backend using program UJS_ACTIVATE_CONTENT...
Please suggest..
Thanks
Bobby
Edited by: bobbydon on Jul 7, 2010 7:46 PM

Logical system not updated in the business system adapter specific data par

Hello Guys,
I changed a logical system name in the sld for a business system and that that is not reflected in the Integration directory adapter specific data tab.
I did a cache refresh using :
1) sxi_cache --- Full cache refresh, delta cache refresh
2) Hard cache refresh
3) In ID "Cleared SLD data cahe "
4) Refreshed the exchange profile
But no use
Can you please tell how i can get the logical system name for the business system updated in the Integration Directory.

When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
Run the cache in the ID are there any errors there?
check the RWB cache monitoring is everything green there?

Logical System not maintained

Dear Experts,
I need to generate JVRD condition idoc using FV13 for a new site for some articles.JVRD condition is maintained in SAP.But when i try to send the condition type using the above t-code it generates no Idoc and shows me the message
Segment is not intended for reciever LS_E111. However for other stores its running f9.Do i need to maintain or define Logical System 'LS_E111' some where for this new site? I hv already checked in WE20 for partner profile .Pls help

Hello,
I'm not familiar with JVRD. Have you checked the receiver port in WE21 and SM59? You can find the receiver port in WE20 outbound parameters
Regards,
Michael

Logical System not appearing in SLD

Hello Friends,
Logical System of SAP R/3 system is not appearing in SLD. The logical system is available in backend ABAP System. I have even run the RZ70 data collection programs as well. However, I am not able to populate the logical system names in SLD.
I have put the same logical system names in the client tab of the technical system but in vain. The logical system field is non-editable and I believe it is always non-editable unless some technical system is not assigned to it.
The logical system name is also not available in ID (if it is not in SLD then it won't be in ID as well).
[The SLDCHECK is throwing exception 4. what to do for this? May be the data is not transfered because of this? Even though I have maintained proper password in SLDAPICUST!!!]
Request your kind adivse on what can be done. Where can I lookout for possible errors.
Thanks & Regards,
Anand Patil

Hi
On SLD - > Technical System -> Client -> Logical System Name , generally It is Editable entity .
If in Your Case , You can not change it, chech with ut basis Guy , for roles and authorisation against your Username ,
Check the Same SLD Roles with some PI Service User.
Regards
Prabhat Sharma.

Problems with CIF (Logical system not assign to BSG)

Hello,
We are sending all master data from ECC to APO. We set up the CIF in DEV and all worked fine. But when we try to send the data from ECC to APO in QA an error appears. It says that the logical system is not assign in the BSG. Apparently the configuration that we have in DEV is the same that we have in QA. The logical systems in all instances (DEV & QA) have the same name. Could this be the problem?
Thanks,
David

Hi David,
1) Check whether BSG is defined in customisation under the below
link
SAP - Implementation Guide > Integration with SAP Components
     > Integration via APO Core Interface (CIF)    >
    Basic Settings for Creating the System Landscape   > Maintain Business System Group
2) Check the BSG is assinged to the logical system under the
spro transaction
SAP - Implementation Guide > Integration with SAP Components
     > Integration via APO Core Interface (CIF)    >
    Basic Settings for Creating the System Landscape   >
Assign Logical System and Queue Type
3) Check BSG is showing in APO material master for a location
product under "Properties" tab.
Regards
R. Senthil Mareeswaran.

Event trace error: own logical system not defined ?

Hello,
i am trying to start a workflow when the status of a document changes to "completed". I was checking the event trace with transaction code : "SWEL" and i found out that the workflow is trying to start but there is some kind of error and the event trace is saying :
Your own logical system has not been defined for this client. Most of the ALE functions therefore cannot be used. No links can be written.
Any suggestiobns on what can be the problem ?
points are awarded
Regards

Sounds like you need to setup your client as a logical system, to do so..
To do setup the Logical System follow the following steps
In IMG Settings
Cross Applications -> Distribution (ALE) -> Basic Cofiguration.
Set up Logical System -> Maintain Logical System.
Create New Entries

Distribution system for logical system not correctly maintained

Im logged in into SAP R/3 system. When starting transaction POIT I chose "production orders for".
I fill in the fields for
Plant -> 001
Material -> T-HV200 (Ice Mix)
At the top I have to enter a "optimization system".
I chose the logical system I created (CE6CLNT850) from a list.
After I hit the execute button it says:
"Distribution system for logical system CE6CLNT850 not correctly maintained."
The distribution model for CE6CLNT850 (transaction: BD64) looks like this:
Componentsystem CE6 SAP R/3 4.6c----
CE6CLNT850
NX7CLNT800----
NX7CLNT800,No Short text exists
LOIPRO----
Production order
What is the problem here?
And by the way, WHY DO I HAVE 479 entries in my list of logical systems when I'm trying to chose the "optimization system"???
best regards,
Lunatikk

Thanks for your answer,
the RFC destination is configured correctly. It says that the connection works when I run the test.
I'll post it in an other forum as you suggested but I have another question:
You said that it is possible to have 474 logical systems configured on the system.
1. Who defined those systems and why?
I am the first one in my company using this system.
We ordered to a SAP system through RAC Service.
I thought we would get a "fresh installation" of the SAP system -
2. please correct me if I'm wrong.
For example there are logical systems with names like "boon software" and "camstar", which are real companies.
There aren't just logical systems configured, there are also additional RFC destinations, distribution models and ports that were there from the beginning.
3. Is it possible that those logical systems interfere with the sending of the IDOC. Could it be possible?

Business system not seen

Hi all,
I am working on a JDBC-XI-Idoc scenario.
I have created a business system and a technical system. I have also completed all my design in the repository.
When i try to create a new object in the Directory, it is asking for the business system. But the business system which i had created in the SLD is not seen in the list of business systems which is getting displayed.
Can anybody help me in this?
Thanks in advance,
Divija.

Hi,
you need to assign the business system first
1. you can do it in the directory - open business systems without party and right click and <b>assign business system</b>
2.if you won't see your business system there
refresh sld first (from the manu in directory)
and repeat the step 1.
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Error in IDES while cratimg PO - Logical system not defined

Hi,
While creating PO in IDES , system is giving following error ,
"Logical system is not defined"
Pl suggest the solution,
Thanks a ton in advance,
NB

Hi
in BD54 Check have u defined logical system for client 800
for more details post ur prob. in SAP NetWeaver forum
Vishal...

Logical system not defined.

Hello
Can some body help me to identify the issue which gives me an error,No Logical system for FI is manitained .
This error, I receive at the time of approving shopping carts.
Thanks.
Jayawant Gokhale

Hi,
Pls refer the foll threads:
PO transfer from SRM to vendor system
PDP issue - ext reqts missing in SRM system
External system to SRM
Re: Upload PO from XML file in SRM
BR,
Disha.
Pls reward points for useful answers.

System not seen in SMD inspite of being present in SMSY

Hi all,
We have upgraded a system 2 months back.While setting the SMD for the managing system ,found that the landscape management (in SMD) is not updated with the right version of the system,so deleted it from there.
Further continued to Diagnostics setup-managed systems-setup wizard; but here i didnt find my system for which the SMD should be set up.I have installed the SMD agents they are up and running.
Also checked the system in SMSY,found that there is discrepancy with the system in " LOGICAL COMPONENTS" and corrected the right version there.
I ran the SMD wizard for the managing system i.e SMD upgrade ,also ran the upgrader expecting that the SMD will pull the system data from SMSY,but nothing of sought has happened.
Note 1113137 - Outdated Solution in Solution Manager Diagnostics ,isnt relevant to my case.
Also i understand that using tcode SMDIAG_WIZARD isnt relevant for my case ,we have solman 7.0 sp stack level 17.
Could any one please let me know how can i have the system in SMD
i.e. how to restart the soltuion setup and relaod the landscape.
Regards,
Sunanda

Hi,
Please find below the logs which i got from
Diagnostics Administration-Manged system- Agent administration -Agnet log viewer
Agent: <no server na,e> xxxxxxx.xxx.com
Log Location:SMDAgentApplication.0.log
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[SMDAgentAppLog]/>
<!PATTERN[SMDAgentApplication.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%t] %10s %m)]/>
<!ENCODING[ISO8859_1]/>
<!FILESET[0, 10, 1000000]/>
<!PREVIOUSFILE[SMDAgentApplication.9.log]/>
<!NEXTFILE[SMDAgentApplication.1.log]/>
<!LOGHEADER[END]/>
Jan 8, 2009 10:15:44 AM [Thread[Thread-6,5,main]] Warning CAPatchInstaller_78317831: Patching Component Analyzer [/usr/sap/SMD/J91/component_analyzer] with [/usr/sap/SMD/J91/SMDAgent/applications/com.sap.smd.agent.application.datacollector_7.0017.20081029140742.0000/patch/CA_7.00.17.2.20081029142003.patch.zip]
Similarly i have logs for the other two virtaula servers too.
Please note that only the SMD agents have been installed and the SMD setz wizardisnt yet performed ,as the system is missing form the list .
Kindly advise
Thanks and Regards,
Sunanda

HotNews Inbox - system not seen

Hello,
There is no system visible in HotNews Inbox, but for support package stack the system is visible for that solution. For other solutions systems in HotNews Inbox are visible.
Any hints please.
Solution Manager 4.0 and SPS09.
best regards,
Michal

Hi,
Please find below the logs which i got from
Diagnostics Administration-Manged system- Agent administration -Agnet log viewer
Agent: <no server na,e> xxxxxxx.xxx.com
Log Location:SMDAgentApplication.0.log
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[SMDAgentAppLog]/>
<!PATTERN[SMDAgentApplication.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%t] %10s %m)]/>
<!ENCODING[ISO8859_1]/>
<!FILESET[0, 10, 1000000]/>
<!PREVIOUSFILE[SMDAgentApplication.9.log]/>
<!NEXTFILE[SMDAgentApplication.1.log]/>
<!LOGHEADER[END]/>
Jan 8, 2009 10:15:44 AM [Thread[Thread-6,5,main]] Warning CAPatchInstaller_78317831: Patching Component Analyzer [/usr/sap/SMD/J91/component_analyzer] with [/usr/sap/SMD/J91/SMDAgent/applications/com.sap.smd.agent.application.datacollector_7.0017.20081029140742.0000/patch/CA_7.00.17.2.20081029142003.patch.zip]
Similarly i have logs for the other two virtaula servers too.
Please note that only the SMD agents have been installed and the SMD setz wizardisnt yet performed ,as the system is missing form the list .
Kindly advise
Thanks and Regards,
Sunanda

PORDCR102 - Logical system not updated in EKKO

Hi,
I am using idoc PORDCR102 to create Purchase Orders.
The PO is created successfully but the LOGSY field in EKKO table is not updated with the value from field LOGSYSTEM in the header segment of the IDOC.
Kindly do the needful.
Thanks in advance.

When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
Run the cache in the ID are there any errors there?
check the RWB cache monitoring is everything green there?

Logical system not seen in ID (7.0)

Similar Messages

Maybe you are looking for