Logical systems assignment when SRM and ECC are on 2 different servers

Hi SRM guru's,
What is the standard practice for Logical system creation and assignment when ECC and SRM are on 2 different servers.
I could not able to find which i created a logical system in SRM server which i created in ECC
Same for the ECC also.
how do i assign logical system of SRM to ECC
vice versa.
your prompt response is appreciated.
Regards

Hi Sai,
Logical System Naming/Creation procedure is not dependent on the servers but it is just a logical representation of a system.
As you are trying to name logical systems for ECC & SRM, please follow the below procedure which is usually recommeded by SAP and followed.
Logical System : <SID>CLNT<Client Number>
For Example if you have a client 300 in system DE0 (also called SID), the logical system name will be DE0CLNT300. And it will be same for SRM system.
You can refer the below document which eplains the creation of logical system and RFC destinations etc
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
Note: Only while configuring the RFC Destination, the servers will play a crucial role.
Regards
Kathirvel

Similar Messages

"Logical System" & "Assign Logical System to Client"

Hi Experts,
I'm new to Basis, I have the following systems installed:
1. EBP and SUS are installed in same server with different client:
    EBP: E01 with client 100
    SUS: E01 with client 200
2. ECC system is installed at a separate setver
    ECC: D01 with client 100
My question is, in EBP client which logical systems and client assigments need to be done?
What I confused is, for the EBP and ECC they have same client number 100, in EBP client , the client number 100
should be assigned to EBP or to ECC?
Kindly please guide.
Thanks and best regards
Jack

Hello Jacky,
                   You can assign the client number 100 to EBP and ECC systems, it doesn't create any problem. Because when you logical system in EBP, you need to create two logical systems one for EBP and ECC, but you need to assign client 100 to EBP only, same goes to the other side also.
Regards,
Prasanna

Unit of Measurement is comming **** in SRM and ecc system

Hi All,
I create new Unit in CUNI and replicated in my system but now if i see all the old PO's in SRM and ECC.....All units of measurement are comming '****' in place of unit of measurement but when i create a new Sc and PO replicated in ECc that vlaue is comming perfectly fine . Please tell me how i can fix this bug.
Regards to all,
Smriti Arora

i check translation it is availabe in english.But how could this happen to all the UOM.......i check in ECC and SRM ie coming ****.
Smriti Arora

SRM-Synching company code description between SRM and ECC

Hi,
I have two questions:
1. Is company code descriptions and other details are stored in SRM (like T001 in ECC)?
2. If yes, how can we synch the company code description in SRM and ECC? What is the program name to synch both system
Jit

Sanjeev,
Thanks for the reply. But still there is description difference in SRM - frontend and backend system.
The SRM backend is correct but when we log ninto the SRM portal (frontend), the company code description are missing some characters. Can you pl let me know where is the frontend is picking the Company code description in SRM?
Jit

Japanese language extraction both bw and ecc are unicode.

Hi all,
I am trying to load the japanese language from ecc to bw.
Both ecc and bw are unicode system. Both bw and ecc has japense language installed.
I can see the data in the psa has japanse lanaguage but when i try to load the data i am getting an error.
zabc : data record 6301 (: a2890000) version (@#$@##) is not valid.
can anyone pls guide me thanks

Hi Gaurav,
I did happened to check all the links provided earlier before i started posting on this forum. and happened to raise a message to sap but havent heard abt it too.
thanks for the links
Thanks

Link between SRM and ECC invoice

Dear gurus,
I need to find the link between SRM and ECC invoice number, can you please provide me the related tables?
Thank you in advance for your collaboration.
Regards,
Fuffo

i don't have access to the system now but i guess will be table BBP_PDBEI.
or you can go tcode BBP_PD, check in item level.
cheers.

SRM AND ECC

Dear all,
Iam new to SRM.pls explain brief about SRM.
I have installed ECC 6.0 ABAP STACK only hp-ux,db2 9.1.
pls tell me 1.whether we need to install abap+java stack in srm or only java is enough.
2.pls tell me brief explanation about how to go about that.
3.how to link srm and ecc 6.0.whether srm

Dear Rajesh,
SRM is a e-procurement solution and it's web based procurement. If you are having MM knowledge then you can understand very easily or Even if you knew sap-abap then you can understand quickly SAP-SRM.
Please go thorugh the below link then you can understand very easily.
http://help.sap.com/saphelp_srm50/helpdata/en/8d/f6a93e08503614e10000000a114084/frameset.htm
If you require more clarifications then let me know.
Thanks
Ravi

Logical Systems for client 000 and 001

I've just install solman 7.0 ehp1 sr1 and am going to create a new client from 001.
Do I need to create logical systems for clients 000 and 001?
Do I need to creat rfc's for these?
Thanks,
Daniel

no, no need.
you will create a logical system name for the copied client (such as 100)

[svn] 3580: MXMLG-243 - Path does not draw in the correct location when width and height are set

Revision: 3580
Author: [email protected]
Date: 2008-10-10 16:24:50 -0700 (Fri, 10 Oct 2008)
Log Message:
MXMLG-243 - Path does not draw in the correct location when width and height are set
Fixed MatrixUtil.transformBounds to offset the four bound points by the origin
Bug: MXMLG-243
QA: Yes
Doc: No
Review: Evtim
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-243
http://bugs.adobe.com/jira/browse/MXMLG-243
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/utils/MatrixUtil.as

Hi,
For web application problem, please post your thread in
ASP.NET forum.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

Can we use NWBC with both SRM and ECC

HI
Can we use NWBC both SRM and ECC . or do i have to use EP .
Thanks,
Pooja

Hi
Hope this will answer your question
ECC Transactions in NWBC Browser SRM 7.0
Thanks,
Ashish

Mapping between SRM and ECC long text

Hi Experts,
Please advise if anyone know where SAP do mapping of long texts of SRM and ECC objects. I found it in one program in my last project but forgot the name.
Regards,
Kamal

Hello Kamal,
You can use BBP_LONGTEXT_BADI for mapping SRM text to ECC text. SRM needs mapping rules to map SRM text into ECC text.
For details check BBP_DPO_TO_BAPI_MAP that executes the mapping ( text_copy_rules_be_get ).
Hope this helps.
Thanks
Ashutosh

[svn] 2530: Fix incorrect drawing of line, when xFrom and yFrom are non-zero

Revision: 2530
Author: [email protected]
Date: 2008-07-18 15:44:40 -0700 (Fri, 18 Jul 2008)
Log Message:
Fix incorrect drawing of line, when xFrom and yFrom are non-zero
Reviewed by Ryan
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/Line.as

Revision: 2530
Author: [email protected]
Date: 2008-07-18 15:44:40 -0700 (Fri, 18 Jul 2008)
Log Message:
Fix incorrect drawing of line, when xFrom and yFrom are non-zero
Reviewed by Ryan
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/Line.as

Enabl BGP between PE-CE when PE and CE are in same AS

We have BGP enable PE-CE setup in MPLS network. Customer A has branches with unique AS numbers.
We connected our PE routers via BGP with customer CE. Issue is Customer's Head Office AS number is equal to our AS number .
We are telecom provider having same AS for iBGP in our MPLS network.
Can you say how connect customer AS (Headoffice) with our PE router when PE and CE are in same AS

No, you cannot use it only at one side otherwise one side will try to do an iBGP peering while the other will try to do an eBGP peering. And anyway, IOS is smart enough to refuse the local-as command if the remote-as matches its local AS.

Enable BGP between PE-CE when PE and CE are in same AS

We have BGP enable PE-CE setup in MPLS network. Customer A has branches with unique AS numbers.
We connected our PE routers via BGP with customer CE. Issue is Customer's Head Office AS number is equal to our AS number .
We are telecom provider having same AS for iBGP in our MPLS network.
Can you say how connect customer AS (Headoffice) with our PE router when PE and CE are in same AS

AS Override?

HT1146 I can not get my mail to send on my mac. It has been fine until about 2 hours ago, incoming mails are fine. I have jused all of my 3 accounts and I can't send from any og them (they are all on different servers) anyone have nay ideas on how I can f

I can not get my mail to send on my mac. It has been fine until about 2 hours ago, incoming mails are fine. I have jused all of my 3 accounts and I can't send from any og them (they are all on different servers) anyone have nay ideas on how I can fix this?

Jailbreaking violates the Apple warranty and licensing agreement and voids ALL support from Apple. No one on here can help you as doing so is a violation of the Terms of Use of these Communities. If you send the iPad to Apple they will just send it back to you as they are not permitted to work on a machine that has been jailbroken.

Logical systems assignment when SRM and ECC are on 2 different servers

Similar Messages

Maybe you are looking for