Logical Test (/SAPAPO/OM03) fails with liveCache-test on LCA incorrect mess
Hi All,
On SCM 5.0 instance, when running logical test transaction (/n/SAPAPO/OM03), I get the following message at the end of the test:
liveCache-test on LCA incorrect.
There is no shortdump or any database errors I can see. Please advice.
Many Thanks,
Regards,
Nisch
Hello Nisch,
You are running SCM 5.0 system, therefore you are SAP customer. Please create the SAP ticket concerning this issue => we could logon via OSS and check the status of your system.
-> If you are running the SCM 5.0 installation, you have to follow the liveCache installation guide and finish all post installation steps, run //om13 -> checks , click on the info box of the red semaphores u2026
Review the system logs in /nsm21.
Then you could run /SAPAPO/OM03, it is the test Program for liveCache and LCA, in the liveCache relevant client.
If it's failed & you don't know the reason of the failure => create the SAP ticket to the component 'BC-DB-LCA'.
Thank you & best regards, Natalia Khlopina
Similar Messages
-
ConnectionBean fail with stress test. please assist.
I am using the following to get connected to database.
package com.db;
import java.util.*;
import java.io.*;
import java.sql.*;
import javax.servlet.http.*;
public class ConnectionManager implements HttpSessionBindingListener
private Connection connection;
private Statement statement;
private String driver = "";
private String dbURL = "";
private String login = "";
private String password = "";
static public void main(String[] args)
ConnectionManager cm = new ConnectionManager();
} // main
public ConnectionManager()
Properties Prop = new Properties();
try {
InputStream configStream = getClass().getResourceAsStream("/config/database.properties");
Prop.load(configStream);
configStream.close();
} catch(IOException e) {
System.out.println("Error: Cannot laod configuration file ");
driver =Prop.getProperty("driver");
dbURL = Prop.getProperty("dbURL");
login = Prop.getProperty("login");
password = Prop.getProperty("password");
public void setDriver (String sDriver)
if (sDriver != null)
driver = sDriver;
public String getDriver ()
return driver;
public void setDbURL (String sDbURL)
if (sDbURL != null)
dbURL = sDbURL;
public String getDbURL()
return dbURL;
public void setLogin (String sLogin)
if (sLogin != null)
login = sLogin;
public String getLogin()
return login;
public void setPassword (String sPassword)
if (sPassword != null)
password = sPassword;
private String getPassword()
return password;
private void getConn ()
try
Class.forName(driver);
connection = DriverManager.getConnection(dbURL,login,password);
statement=connection.createStatement();
catch (ClassNotFoundException e)
System.out.println("ConnectionManager: driver unavailable");
connection = null;
catch (SQLException e)
System.out.println("ConnectionManager: driver not loaded");
connection = null;
public Connection getConnection()
if (connection == null)
getConn();
return connection;
public void commit() throws SQLException
connection.commit();
public void rollback() throws SQLException
connection.rollback();
public void setAutoCommit(boolean autoCommit)
throws SQLException
connection.setAutoCommit(autoCommit );
public ResultSet executeQuery(String sql) throws SQLException
if (connection == null || connection.isClosed())
getConn();
return statement.executeQuery(sql);
public int executeUpdate(String sql) throws SQLException
if (connection == null || connection.isClosed())
getConn();
return statement.executeUpdate(sql);
public void valueBound(HttpSessionBindingEvent event)
System.err.println("ConnectionBean: in the valueBound method");
try
if (connection == null || connection.isClosed())
connection = DriverManager.getConnection(dbURL,login,password);
statement = connection.createStatement();
catch (SQLException e)
e.printStackTrace();
connection = null;
public void valueUnbound(HttpSessionBindingEvent event)
close();
public void close()
try
if ( connection != null
|| !connection.isClosed())
connection.close();
catch (SQLException e)
e.printStackTrace();
}This is what I use to test this code:
<%@ page import="java.sql.*" %>
<%@ page import="java.text.*" %>
<%@ page import="java.util.*"%>
<%@ page import="java.io.*" %>
<p>
Testing DBConnection Bean. <p>
<%
String sql="SELECT * FROM BS_PERSON" ;
com.db.ConnectionManager CM = new com.db.ConnectionManager();
ResultSet rset = CM.executeQuery(sql);
while (rset.next()) {
out.println(rset.getString("PERSON_USERCODE") + "<br>");
%>When I stress test it, the code perform well for a while and then throw the following on Tomcat:
ConnectionManager: driver not loaded
ConnectionManager: driver not loaded
ConnectionManager: driver not loaded
Is there anything I could improve?
For application that has many database read/write, is there any open source connection program that uses connection pooling?
Thank you.Thank you for the prompt response.
Yes. the code works and the data set gets return when I execute the code. It only fail with stress test after say 150-160 hits.
I have put in the printStack Trace and got the following:
ConnectionManager: driver not loaded
java.sql.SQLException: ORA-00020: maximum number of processes (150) exceeded
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
at oracle.jdbc.ttc7.O3log.receive1st(O3log.java:407)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:259)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:346)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at com.db.ConnectionManager.getConn(ConnectionManager.java:106)
at com.db.ConnectionManager.executeQuery(ConnectionManager.java:154)
at org.apache.jsp.dbconnection_jsp._jspService(dbconnection_jsp.java:76)
Could it be that I didn't specifically close the connection? How could I go about doing it?
Thank you. -
First flexunit test is always failing with Error Error #1009: Cannot access a property or method of
Hi,
I have flexunit project which I am trying to run on linux server.
1. I have Tests project.
2. I am trying to compile it on linux server and creating Tests.swf file and then executing Tests.swf using ant on 64 bit linux server using standalone flash debug player.
3. Tests project contains 4 tests and first tests always fail with following error,
test:
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using default working dir [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests]
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [/var/lib/flex4.1sdk]
[flexunit] haltonfailure: [true]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/report]
[flexunit] Setting up server process ...
[flexunit] Entry [/mnt/build/VinitFlexUnitBranch/workspace/bin] already available in local trust file at [/home/deploy/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Starting server ...
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit] Client connected.
[flexunit] Setting inbound buffer size to [262144] bytes.
[flexunit] Receiving data ...
[flexunit] Sending acknowledgement to player to start sending test data ...
[flexunit]
[flexunit] FlexUnit test pause in suite Tests.Classes.DummyASyncTest had errors.
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
[flexunit] <testcase classname="Tests.Classes::DummyASyncTest" name="pause" time="8" status="error"><error message="Error #1009: Cannot access a property or method of a null object reference." type="Tests.Classes::DummyASyncTest.pause" ><![CDATA[TypeError: Error #1009: Cannot access a property or method of a null object reference.
[flexunit] at org.fluint.uiImpersonation.flex::FlexEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.fluint.uiImpersonation::VisualTestEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher/getStage()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher()
[flexunit] at org.flexunit.internals.runners.statements::StackAndFrameManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withStackManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withDecoration()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()
[flexunit] at org.flexunit.runner::FlexUnitCore/verifyRunnerCanBegin()
[flexunit] at org.flexunit.token::AsyncCoreStartupToken/sendReady()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/sendReadyNotification()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/handleListenerReady()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at org.flexunit.listeners::CIListener/setStatusReady()
[flexunit] at org.flexunit.listeners::CIListener/dataHandler()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at flash.net::XMLSocket/scanAndSendEvent()]]></error></testcase>
[flexunit] <endOfTestRun/>
[flexunit] Analyzing reports ...
[flexunit]
[flexunit] Suite: Tests.Classes.DummyASyncTest
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
[flexunit] Results :
[flexunit]
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
BUILD FAILED
/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/build.xml:26: FlexUnit tests failed during the test run.
at org.flexunit.ant.tasks.TestRun.analyzeReports(Unknown Source)
at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:390)
at org.apache.tools.ant.Target.performTasks(Target.java:411)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.apache.tools.ant.Main.runBuild(Main.java:809)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Total time: 1 second
Exited with status 1
[deploy]$
4. Everytime I run this, any test which is run first will fail and all other tests will pass.
My Tests.as file is as below:
* Tests.as
package
import Tests.XTestSuite;
import flash.display.Sprite;
import mx.core.FlexSprite;
import org.flexunit.listeners.CIListener;
import org.flexunit.listeners.UIListener;
import org.flexunit.runner.FlexUnitCore;
public class Tests extends Sprite
public var flexSprite:FlexSprite;
public function Tests()
onCreationComplete();
public function onCreationComplete() : void {
var core : FlexUnitCore = new FlexUnitCore();
core.addListener(new CIListener());
core.runClasses(Tests.XTestSuite);
public function currentRunTestSuite():Array
var testsToRun:Array = new Array();
testsToRun.push(Tests.XTestSuite);
return testsToRun;
XTestSuite try to run 4 flexunit test classes.
one of that flexunit test script class is as below:
package Tests.Classes
import flexunit.framework.Assert;
import org.flexunit.Assert;
import org.flexunit.asserts.assertEquals;
public class DummyASyncTest
[Test]
public function pause() : void
assertEquals(true, true);
trace("I M in dummy");
All other tests are dummy tests which just asserts(true, true).
I am not sure if I doing something wrong or forgot to take care of something.Hi,
I have flexunit project which I am trying to run on linux server.
1. I have Tests project.
2. I am trying to compile it on linux server and creating Tests.swf file and then executing Tests.swf using ant on 64 bit linux server using standalone flash debug player.
3. Tests project contains 4 tests and first tests always fail with following error,
test:
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using default working dir [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests]
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [/var/lib/flex4.1sdk]
[flexunit] haltonfailure: [true]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/report]
[flexunit] Setting up server process ...
[flexunit] Entry [/mnt/build/VinitFlexUnitBranch/workspace/bin] already available in local trust file at [/home/deploy/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Starting server ...
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit] Client connected.
[flexunit] Setting inbound buffer size to [262144] bytes.
[flexunit] Receiving data ...
[flexunit] Sending acknowledgement to player to start sending test data ...
[flexunit]
[flexunit] FlexUnit test pause in suite Tests.Classes.DummyASyncTest had errors.
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
[flexunit] <testcase classname="Tests.Classes::DummyASyncTest" name="pause" time="8" status="error"><error message="Error #1009: Cannot access a property or method of a null object reference." type="Tests.Classes::DummyASyncTest.pause" ><![CDATA[TypeError: Error #1009: Cannot access a property or method of a null object reference.
[flexunit] at org.fluint.uiImpersonation.flex::FlexEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.fluint.uiImpersonation::VisualTestEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher/getStage()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher()
[flexunit] at org.flexunit.internals.runners.statements::StackAndFrameManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withStackManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withDecoration()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()
[flexunit] at org.flexunit.runner::FlexUnitCore/verifyRunnerCanBegin()
[flexunit] at org.flexunit.token::AsyncCoreStartupToken/sendReady()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/sendReadyNotification()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/handleListenerReady()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at org.flexunit.listeners::CIListener/setStatusReady()
[flexunit] at org.flexunit.listeners::CIListener/dataHandler()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at flash.net::XMLSocket/scanAndSendEvent()]]></error></testcase>
[flexunit] <endOfTestRun/>
[flexunit] Analyzing reports ...
[flexunit]
[flexunit] Suite: Tests.Classes.DummyASyncTest
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
[flexunit] Results :
[flexunit]
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
BUILD FAILED
/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/build.xml:26: FlexUnit tests failed during the test run.
at org.flexunit.ant.tasks.TestRun.analyzeReports(Unknown Source)
at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:390)
at org.apache.tools.ant.Target.performTasks(Target.java:411)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.apache.tools.ant.Main.runBuild(Main.java:809)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Total time: 1 second
Exited with status 1
[deploy]$
4. Everytime I run this, any test which is run first will fail and all other tests will pass.
My Tests.as file is as below:
* Tests.as
package
import Tests.XTestSuite;
import flash.display.Sprite;
import mx.core.FlexSprite;
import org.flexunit.listeners.CIListener;
import org.flexunit.listeners.UIListener;
import org.flexunit.runner.FlexUnitCore;
public class Tests extends Sprite
public var flexSprite:FlexSprite;
public function Tests()
onCreationComplete();
public function onCreationComplete() : void {
var core : FlexUnitCore = new FlexUnitCore();
core.addListener(new CIListener());
core.runClasses(Tests.XTestSuite);
public function currentRunTestSuite():Array
var testsToRun:Array = new Array();
testsToRun.push(Tests.XTestSuite);
return testsToRun;
XTestSuite try to run 4 flexunit test classes.
one of that flexunit test script class is as below:
package Tests.Classes
import flexunit.framework.Assert;
import org.flexunit.Assert;
import org.flexunit.asserts.assertEquals;
public class DummyASyncTest
[Test]
public function pause() : void
assertEquals(true, true);
trace("I M in dummy");
All other tests are dummy tests which just asserts(true, true).
I am not sure if I doing something wrong or forgot to take care of something. -
Unmarshal fails with OTD Tester
Sorry to bother you again with another JCAPS-question, but I would like to know how to troubleshoot these kind of error messages. I tried to test my deployment dpData_Conversion_for_IP but it failed with an unmarshal error..now I have seen this error before and I know that other folks fixed it for me the last couple of times, but I'd like to learn on how to address an issue like this.
When I ran the otdtester I receive an error message like:
There was an error during unmarshal.
"...00100001\r\n"<POS>"L113218807..." failed input match, after RecordGroup[1]: left over 3086 bytes at end of data
When I enable Verbose Mode I get the following detailed output (see attachment) which basically tells me at te end that there are so many bytes of data left that could not be matched. Does it mean that my file I present to unmarshal contains more data than I told it to expect? How would you normally fix an issue like this? I looked at the source file and the otd and the field lengths do add up: the header ends at position 163 and the line items at position 125
Do the line item lines need to be adjusted (the number of times they repeat?)
My custom input otd used to work fine until last week then I made some changes to the EDI-mapping, but I didn't alter the field length, or the number of fields, so then it should not have any effect.
Below you will find the output in Verbose Mode:
[ parse #0 ]
[ parse 'root', pos=0, end=292, mandatory ]
[ parse group, count=0, order=0, must ]
[ parse #1 ]
[ parse 'RecordGroup', pos=0, end=292, mandatory ]
[ parse group, count=0, order=0, must ]
[ parse #2 ]
[ parse 'Header', pos=0, end=292 ]
[ parse group delim, Fog#25 ]
[ - push local delim list ]
[ - iteration #0 ]
[ parse 'RecType', pos=0, end=292 ]
[ parse fixed, Fog#3, count=0 ]
[ - match EXACT "H1" ]
[ - matched data 0 to 2: "H1" ]
[ - parse: result=1 ]
[ - parse: 'RecType' , done=false, pos=2, end=292, last=EOD ]
[ parse 'PackListNumber', pos=2, end=292 ]
[ parse fixed, Fog#4, count=0 ]
[ - matched data 2 to 22: "5160448 " ]
[ - parse: result=1 ]
[ - parse: 'PackListNumber' , done=false, pos=22, end=292, last=EOD ]
[ parse 'SequenceNumber', pos=22, end=292 ]
[ parse fixed, Fog#5, count=0 ]
[ - matched data 22 to 27: "00001" ]
[ - parse: result=1 ]
[ - parse: 'SequenceNumber' , done=false, pos=27, end=292, last=EOD ]
[ parse 'StockNoticeNumber', pos=27, end=292 ]
[ parse fixed, Fog#6, count=0 ]
[ - matched data 27 to 47: "51604480000100000000" ]
[ - parse: result=1 ]
[ - parse: 'StockNoticeNumber' , done=false, pos=47, end=292, last=EOD ]
[ parse 'CurrentDate', pos=47, end=292 ]
[ parse fixed, Fog#7, count=0 ]
[ - matched data 47 to 67: " " ]
[ - parse: result=1 ]
[ - parse: 'CurrentDate' , done=false, pos=67, end=292, last=EOD ]
[ parse 'SequenceNumber2', pos=67, end=292 ]
[ parse fixed, Fog#8, count=0 ]
[ - matched data 67 to 72: "00001" ]
[ - parse: result=1 ]
[ - parse: 'SequenceNumber2' , done=false, pos=72, end=292, last=EOD ]
[ parse 'RecvStoreNumber', pos=72, end=292 ]
[ parse fixed, Fog#9, count=0 ]
[ - matched data 72 to 89: "0000280942 " ]
[ - parse: result=1 ]
[ - parse: 'RecvStoreNumber' , done=false, pos=89, end=292, last=EOD ]
[ parse 'SchedSendDate', pos=89, end=292 ]
[ parse fixed, Fog#10, count=0 ]
[ - matched data 89 to 98: "080808 " ]
[ - parse: result=1 ]
[ - parse: 'SchedSendDate' , done=false, pos=98, end=292, last=EOD ]
[ parse 'CreationDate', pos=98, end=292 ]
[ parse fixed, Fog#11, count=0 ]
[ - matched data 98 to 107: "080808 " ]
[ - parse: result=1 ]
[ - parse: 'CreationDate' , done=false, pos=107, end=292, last=EOD ]
[ parse 'CreationTime', pos=107, end=292 ]
[ parse fixed, Fog#12, count=0 ]
[ - matched data 107 to 113: "031229" ]
[ - parse: result=1 ]
[ - parse: 'CreationTime' , done=false, pos=113, end=292, last=EOD ]
[ parse 'BillOfLadingNumber', pos=113, end=292 ]
[ parse fixed, Fog#13, count=0 ]
[ - matched data 113 to 133: "5160448 " ]
[ - parse: result=1 ]
[ - parse: 'BillOfLadingNumber' , done=false, pos=133, end=292, last=EOD ]
[ parse 'ASN', pos=133, end=292 ]
[ parse fixed, Fog#14, count=0 ]
[ - matched data 133 to 136: "ASN" ]
[ - parse: result=1 ]
[ - parse: 'ASN' , done=false, pos=136, end=292, last=EOD ]
[ parse 'TRANSACTION_ID', pos=136, end=292 ]
[ parse fixed, Fog#15, count=0 ]
[ - matched data 136 to 163: "ASN08080851604480..." ]
[ - parse: result=1 ]
[ - parse: 'TRANSACTION_ID' , done=false, pos=163, end=292, last=EOD ]
[ - retry parent delimiter ]
[ - retry failed: overshoot, del=164, pos=0 ]
[ - parse: result=0 ]
[ - for #2: count=-1 ]
[ - parse: result=0 ]
[ - parse: 'RecordGroup' , done=false, pos=0, end=292, last=EOD ]
[ - for #1: count=0 ]
[ - parse: result=1 ]
[ - parse: 'root' , done=false, pos=0, end=292, last=EOD ]
[ - for #0: count=1 ]Hey, I got some help from the open-esb users forum. See below.
Mike,
After modifying the xsd (adding match, removing scavenger, moving delimiter
level to the top, removing 2 FILLER2 fields, etc.) and modifying the data a
bit (padding spaces to each detail record to a total 392 bytes excluding
CR&LF), I am able to parse the data. Please refer to the attached zip
including input, xsd, output XML, and parse log.
Any further questions, please let me know.
Thanks!
Lixin
Open ESB Community
http://open-esb.org
-----Original Message-----
From: [email protected] mailto:[email protected]
Sent: Friday, October 17, 2008 2:05 PM
To: [email protected]; 'Mike A Reynolds'
Subject: RE: Custom Encoders Questions
Mike,
There are a number of problems I have found so far as I start looking into
the provided xsd meta and input data:
(1) The header element is also delimited by CR&LF. I see you have put
delimiters for the detail and trailer elements, but the header element
misses to be delimited.
(2) CR&LF can be expressed as "\r\n" or "\x0D\x0A", but not "\n\r". I see
you have "\n\r" in your xsd file which is wrong.
(3) You said header record has 82 bytes, detail has 382 bytes and trailer
has 91 bytes. But I've found a few mismatches:
In your input data file, the header record has 80 bytes + CR+LF = 82
bytes, but your xsd meta definition gives header total byte count of 81
(without CR+LF), which mismatches the expected 82 bytes. You'll need to
correct this in order for the parsing to work. (For me, I have to remove the
"filler2" field in order to get the header parsed.)
In your input data file, each detail record has 350+CR+LF = 352 bytes,
which contradicts the expected 382 bytes. I haven't added up the total bytes
in your xsd meta file, but I suspect they have mismatches.
Similar mismatch may also exist for the detail record, but I haven't got
chance to sum the total.
(4) The header, detail and trailer records all have first byte ("H", "D" or
"T") as record type. You must specify the "RECORD_TYPE" field to match the
character "H", "D" or "T", respectively by putting the character in the
"Match" field and selecting "Alignment" to "exact", meaning exact match.
I see these characters were mistakenly put in the scavenger fields
instead. Please correct this.
After you modify your xsd meta encoding information based on above, you
should be able to parse the input data.
Let me know if there are any questions,
Regards
Lixin
Open ESB Community
http://open-esb.org
-----Original Message-----
From: [email protected]
mailto:[email protected] On
Behalf Of Mike A Reynolds
Sent: Thursday, October 16, 2008 3:11 PM
To: [email protected]
Subject: Custom Encoders Questions
I am trying to create a customer encoder for a batch file
consistes of a header record of 82 bytes, several detail records of 382
bytes and one trailer record of 91 bytes
HACCUMULATED BENEFIT TRANSACTION FILE 20080801 20080825 0
0
D ar3531 ar3531 ar3531 ar3531000
55887027260 30.000 30 5098765 20080804 000T114 120080806
82820P30000001024511 25.00 0.00 25.00 0.00 25.00
25.00 0.00 0.00 0.00 0.00 0.00T
TACCUMULATED BENEFIT TRANSACTION FILE 20080801 20080825
2894 0 0
(See attached file: accumLoad.xsd)
It seems to not like having multiple record formats and dies after reading
the header. How can I tell the encoder to filter on the RECORD_TYPE so that
it picks up the different formats.
Best Regards,
Michael Reynolds
Senior Solutions Engineer - Architecture and Engineering -
Query works in Test mode but fails with transient failure
Hi,
I have a query that works well while testing with input json data. However, when the job is started the query fails with transient failure.
I have two eventhub input sources input1 and input2. I also have a reference data source in a blob, ref.
The query is
WITH nameone AS(
SELECT ref.field1 as field1,ref.field2 as field2,MIN(input1.datetimestamp) AS datetimestamp,avg(input1.value) as value FROM input1 TIMESTAMP BY datetimestamp JOIN ref ON ref.field1 = input1.field1 GROUP BY ref.field1,tumblingwindow(second,30)
), nametwo AS(
SELECT ref.field1 as field1,ref.field2 as field2,MIN(input2.datetimestamp) AS datetimestamp,avg(input2.value) as value FROM input2 TIMESTAMP BY datetimestamp JOIN ref ON ref.field1 = input2.field1 GROUP BY ref.field1,tumblingwindow(second,30)
SELECT field1, field2,datetimestamp,value from nameone
UNION
SELECT field1, field2,datetimestamp,value from nametwo
ThanksI solved the problem.
The issue was in conversion of incoming data to write into an SQL db.
Query failed to convert
System.Int64 (incoming data format) to System.Double ( SQL column data format)
I solved it by changing SQL column format to int, but I think this casting should be done automatically by the query. I can also CAST the data I guess but sometimes using CAST on everything is kind of a pain.
Another issue I faced was the failure messages. I checked the logs for last 12 hours. Sometimes the failure will point to the Writing Error (conversion of int to double) but sometimes the failure will simply be transient failure. So it was difficult to pinpoint
the error exactly.
Thanks anyways. -
Test-OutlookConnectivity cmdlets fail with 401 unauthorized on Autodiscover
I've done quite a lot of searching on this. The defacto answer is disable loopback processing. That does not solve the issue. All virtual directory permissions have been checked and are the recommended MSFT settings. All NTFS permissions
have been checked and are set correctly. I'm out of ideas for what to check next. Thank you for your help.
Test-OutlookConnectivity -Protocol:Tcp -TrustAnySSLCert:$true -MonitoringContext:$true
ClientAccessServer ServiceEndpoint Scenario
Result Latency
(MS)
server.domain.com
Autodiscover: Web service request. Failure -1.00
RunspaceId : 257c3a5e-5a96-42e9-89bb-c423abbc1799
Events : {Source: MSExchange Monitoring OutlookConnectivity
Id: 2003
Type: Error
Message: The test step Autodiscover running over protocol 'ncacn_ip_tcp' issued from test user '/
o=Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=ex
test_73c270fa029c47fe' failed with error: '-2146233088'. The detailed information of the running
instance context: 'Mailbox = 'domain.com\extest_73c270fa029c4', ClientAccessServer = 'server.domain.
com''. The exception: 'Microsoft.Exchange.Monitoring.AutodiscoverTaskException: The Auto
discover response isn't valid. Field = 'AutoDiscoverResponseXML', autodiscoverData = '<Null>'.
at Microsoft.Exchange.Monitoring.AutodiscoverTask.ValidateAutoDiscoverResponse(AutoDiscoverRes
ponseXML autoDiscoverResponseXML)
at Microsoft.Exchange.Monitoring.AutodiscoverTask.AutodiscoverEnd(IAsyncResult asyncResult)'
Verbose: Target Site = 'domain.com/Configuration/Sites/Site-Name'
Verbose: Target Domain = 'domain.com'
Verbose: Target User =
'[email protected]'
Verbose: Mailbox = 'domain.com\extest_73c270fa029c4', Owner = '/o=Organization/ou=Exc
hange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=extest_73c270fa029c47fe'
Verbose: SMTP address for Autodiscover request =
'[email protected]'
Verbose: When contacting
https://server.domain.com/autodiscover/autodiscover.xml received the e
rror The remote server returned an error: (401) Unauthorized.
Verbose: <?xml version="1.0"?>
<Autodiscover xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/
2001/XMLSchema" xsi:nil="true" xmlns="http://schemas.microsoft.com/exchange/autodiscover/response
schema/2006" />
, Source: MSExchange Monitoring OutlookConnectivity
Id: 2006
Type: Error
Message: An exception occurred while the cmdlet was running. This often indicates the test enviro
nment isn't prepared correctly. The administrator needs to examine the configuration. Exception d
etails: Microsoft.Exchange.Monitoring.TopologyDiscoverException: The cmdlet fails to find all the
server information through pinging service providers or other topology discovery inside the doma
in. The cmdlet cannot continue. TopologyDiscoverMode = 'UseAutodiscover, UseAddressbook'.
at Microsoft.Exchange.Monitoring.OutlookConnectivityContext.get_RpcEndpointServer()
at Microsoft.Exchange.Monitoring.RfriClientWrapper.<.ctor>b__1()
at Microsoft.Exchange.Monitoring.OutlookConnectivityContext.RpcExceptionWrapper(Func`1 protect
edCall)
at Microsoft.Exchange.Monitoring.RfriClientWrapper.RfriCall(Func`1 rfriCall)Hi Niko,
I have run across this solution is my previous troubleshooting and it did not resolve the issue. I walked through the process one more time now to be sure it is not the proper resolution for this case. After setting the local and rebooting the
server the same error persists. Additionally checking the box to not require Kerberos pre-authentication has not helped.
When trying to manually reset the password for the extest account I receive the following error:
Test-WebServicesConnectivity -ResetTestAccountCredentials -MailboxServer server -Verbose
VERBOSE: [21:23:30.311 GMT] Test-WebServicesConnectivity : Active Directory session settings for
'Test-WebServicesConnectivity' are: View Entire Forest: 'False', Default Scope: 'domain.com', Configuration Domain
Controller: 'dc.domain.com', Preferred Global Catalog: 'gc.domain.com', Preferred Domain Controllers:
'{ dc.domain.com }'
VERBOSE: [21:23:30.311 GMT] Test-WebServicesConnectivity : Runspace context: Executing user: domain.com/Domain Users &
Computers/Users & Groups/user, Executing user organization: , Current organization: , RBAC-enabled: Enabled.
VERBOSE: [21:23:30.311 GMT] Test-WebServicesConnectivity : Beginning processing &
VERBOSE: [21:23:30.327 GMT] Test-WebServicesConnectivity : Instantiating handler with index 0 for cmdlet extension
agent "Admin Audit Log Agent".
VERBOSE: [21:23:30.327 GMT] Test-WebServicesConnectivity : Current ScopeSet is: { Recipient Read Scope: {{, }},
Recipient Write Scopes: {{, }}, Configuration Read Scope: {{, }}, Configuration Write Scope(s): {{, }, }, Exclusive
Recipient Scope(s): {}, Exclusive Configuration Scope(s): {} }
VERBOSE: Do you want to test Exchange Web Services connectivity on Client Access server server.domain.com?
VERBOSE: [21:23:30.343 GMT] Test-WebServicesConnectivity : Resolved current organization: .
CasServer LocalSite Scenario Result Latency(MS) Error
Site-Name Reset Creden... Failure [Microsoft.Exchange.M...
VERBOSE: [21:23:30.499 GMT] Test-WebServicesConnectivity : Admin Audit Log: Entered Handler:OnComplete.
The task couldn't sign in with user domain.com\extest_73c270fa029c4. Run Scripts\new-TestCasConnectivityUser.ps1 to ver
ify that the user exists on the Mailbox server server.domain.com
To run this task without credentials, sign in as a Domain Administrator. Detailed error information:
1909
+ CategoryInfo : ObjectNotFound: (:) [Test-WebServicesConnectivity], CasHealthCouldNotLogUserException
+ FullyQualifiedErrorId : 29F480F3,Microsoft.Exchange.Monitoring.TestWebServicesConnectivity
VERBOSE: [21:23:30.499 GMT] Test-WebServicesConnectivity : Ending processing & -
Brbackup failing with error "The paramter is incorrect"
Hi
I'm running SAP ERP6.0/Oracle 10.2.0.2/Windows 2008 Server. When I attempt a brbackup to disk it fails with the error below
BR0202I Saving I:\ORACLE\PRD\SAPDATA2\SR3_10\SR3.DATA10
BR0203I to E:\prd_oracle\behmebdl\SR3.DATA10 ...
BR0278E Command output of 'copy I:\ORACLE\PRD\SAPDATA2\SR3_10\SR3.DATA10 E:\prd_oracle\behmebdl\SR3.DATA10':
The parameter is incorrect.
0 file(s) copied.
BR0280I BRBACKUP time stamp: 2011-12-20 16.25.26
BR0279E Return code from 'copy I:\ORACLE\PRD\SAPDATA2\SR3_10\SR3.DATA10 E:\prd_oracle\behmebdl\SR3.DATA10': 1
BR0222E Copying I:\ORACLE\PRD\SAPDATA2\SR3_10\SR3.DATA10 to/from E:\prd_oracle\behmebdl\SR3.DATA10 failed due to
Below are some of the paramters set in the init<SAPSID>.sap
backup_root_dir = stage_root_dir = e:\prd_backup
backup_dev_type = disk
backup_type = online_cons
The user SAPServiceDEV has full rights on the folder e:\prd_backup
I'm using the commad below to fire the backup
C:\usr\sap\PRD\DVEBMGS02\exe\brbackup.exe -u / -p initPRD.sap -d disk -t online_cons -m all -c force
ThanksThanks for your response Fidel
I'm executing the backup from this script
C:\usr\sap\PRD\DVEBMGS02\exe\brbackup.exe -u / -p initPRD.sap -d disk -t online_cons -m all -c force
Drive e: is not a drive shared over the network. It is an external USB disk attached to the server running SAP. I've given user SAPSERVICE<SID> full rights to drive e:
2) change the fixed "drive" letter to UNC name (like
<server>\<directory_path>
When I use UNC name in place of the drive lettter I get the error message below
#backup_root_dir = E:\prd_oracle
backup_root_dir =
NXXX-HX-PXD1\prd_oracle
BR0259I Program execution will be continued...
BR0051I BRBACKUP 7.00 (42)
BR0282E Directory '
NXXX-HX-PXD1\prd_oracle' not found
BR0182E Checking parameter/option 'backup_root_dir' failed
BR0056I End of database backup: behmicld.log 2011-12-21 12.11.37
BR0280I BRBACKUP time stamp: 2011-12-21 12.11.38
BR0054I BRBACKUP terminated with errors
BR0292I Execution of BRBACKUP finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them or go back to repeat the last action -
Lightroom 6 : 'LoadLibrary failed with error 87: Paramètre incorrect'
Hello,
I just LR 5.7 update around 6 and I have the message:
"LoadLibrary failed with error 87: Invalid parameter"
that appears after selecting the catalog.
Ok then after validation by the LR strong message ...
LR 5.7 works well ...
What to do ???
An idea, solution?
thank you
MarcUne recherche sur Google parle d'un problème récurrent avec Windows 8.1 Preview
-
Install Fails With SQL Server Version - Status: Incorrect
Hi. I am working to install BPC 7 in a single server environment. During installation the setup diangostic detects a problem with [[Microsoft and 3rd Party Software]], below is what appears:
X - SQL Server Version
____ OK - Required: 10.0.1600.22 or higher
____ OK - Currently: Not Installed
____ X - Status: Incorrect
X - SQL Reporting Services Server Version
____ OK - Required: 10.0.1600.22 or higher
____ OK - Currently: Not Installed
____ X - Status: Incorrect
X - OLAP Server Version
____ OK - Required: 10.0.1600.22 or higher
____ OK - Currently: Not Installed
____ X - Status: Incorrect
Under [[Computer Services Status]] SQL Server is alright:
OK - MS SQL Server Service
____ OK - Required: Running
____ OK - Currently: Running
____ OK - Status: OK
OK - MS SQL Server Agent Service
____ OK - Required: Running
____ OK - Currently: Running
____ OK - Status: OK
OK - SQL Integrated Service
____ OK - Required: Running
____ OK - Currently: Running
____ OK - Status: OK
OK - SQL Report Service
____ OK - Required: Running
____ OK - Currently: Running
____ OK - Status: OK
OK - MS SQL Server OLAP Service
____ OK - Required: Running
____ OK - Currently: Running
____ OK - Status: OK
What I've Checked so far:
- Collation
- Account for installation is SQL SysAdmin and a Windows account
- Mixed mode authentication
I should mention, this is a single server install on a 64 bit version of Windows, with 64 bit version of SQL.
Any experience, ideas or suggestions are welcome.
Joe
Edited by: jwainz on Mar 29, 2010 5:55 PMI think the clearest statement about this is on page 11 of the Master Guide (SAP BPC 7.0 M Master Guide at [http://service.sap.com/instguidesEPM-BPC]).
Look at the rows for OLAP Server and Microsoft SQL Server. In each of those, you wil find this statement:
"Can be 64‒bit when separate from Application/web services"
On page 10 in the Installation Guide, for look at the rows for Application server Web Server. The prerequisites are as follow:
App Server:
Windows Server 2003 or Windows Server 2003 R2 Standard or Enterprise Edition SP2 (32-bit) configured with NTFS, set to English (United States)
Web Server:
Windows Server 2003 or Windows Server 2003 R2 Standard or Enterprise Edition SP2 (32-bit) configured with NTFS
Finally, the PAM is a bit confusing. For product SAP BPC 7.0 FOR MICROSOFT, click on the tab Operating Systems and then click on the tab BPC Server. That is the software that you install for the Application Server and the Web Server server types. The Operating System Version listed is WINDOWS SERVER 2003/IA32 32BIT -
HP media center m8457c phenom quad core fails multicore cpu test
During Hardware Diagnostic test the CPU fails the multicore test... The error does not give any info, I believe it tests the speed of the cpu with 1 core and then muti-cores and compares the time. The computer does seems slow lately.. Are there any tests I can run to determine what the problem is??
Thanks
FrankIn general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
PUT Blobs of size greater than 5.5MB fail with HTTPS but not HTTP
I have written a Cygwin app that uploads (using the REST API PUT operation) Block Blobs to my Azure storage account, and it works well for different size blobs when using HTTP. However, use of SSL (i.e. PUT using HTTPS) fails for Blobs greater than 5.5MB.
Blobs less than 5.5MB upload correctly. Anything greater and I find that the TCP session (as seen by Wireshark) reports a dwindling window size that goes to 0 once the aforementioned number of bytes have been transferred. The failure is very repeatable and
consistent. As a point of reference, PUT operations against my Google/AWS/HP accounts work fine when using HTTPS for various object sizes, which suggests my problem is not in my client but specific to the HTTPS implementation on the MSAZURE storage servers.
If I upload the 5.5MB blob as two separate uploads of 4MB and 1.5MB followed by a PUT Block List, the operation succeeds as long as the two uploads used
separate HTTPS sessions. Notice the emphasis on separate. That same operation fails if I attempt to maintain an HTTPS session across both uploads. This is another data point that seems to suggest that the Storage
server has a problem
Any ideas on why I might be seeing this odd behavior that appears very specific to MS Azure HTTPS, but is not seen when used against AWS/Google/HP cloud storage servers?Hi,
I'm getting this problem also when trying to upload blobs > 5.5mb using the Azure PHP SDK with HTTPS.
There is no way I can find to get a blob > 5.5mb to upload, unless you use http, rather than https, which is not a good solution.
I've written my own scripts to use the HTTP_Request2 library, to send the request as a test, and it fails with that also when using the 'socket' method.
However, if I write a script using the PHP Curl extension directly, then it works fine, and blobs > 5.5mb get uploaded.
It seems to be irrelevant which method is used, uploading in 1 go, or using smaller chunks, the PHP SDK seems broken.
Also, I think I've found another bug in the SDK, when you do the smaller chunks, the assigning of the BlockID is not correct.
In: WindowsAzure/Blob/BlobRestProxy.php
Line: $block->setBlockId(base64_encode(str_pad($counter++, '0', 6)));
That is incorrect usage of the str_pad function, and if you upload a huge blob that needs splitting, then the blockIDs will after a while become a different length and therefore fail.
It should be: str_pad($counter++, 6, '0',STR_PAD_LEFT);
I also think there is 1 too many base64_encodes() in there, as I think its being done twice, once in that line, and then again within the createBlobBlock() just before the send() for a 2nd time.
Can someone please advice, when this/these bug(s) will be fixed in the PHP SDK, as at the moment its useless to me as I cant upload things securely. -
Synthetic Transactions Fail with TLS error
Hi,
Most of the test-cs cmdlets fail with the error: The operation failed due to issues with Tls. See the exception for more information.
Inner Exception:CertificateInfoNative::AcquireCredentialsHandle() failed; HRESULT=-2146893043.
Lync itself is working fine.
Any thoughts?Hi,
Are you trying this command via remote power shell which is not exactly the lync server, if this is the case then with which user are you logged in, does this user have required permissions. also have a look in to this.
http://social.msdn.microsoft.com/Forums/en-US/ucmanagedsdk/thread/ca0d7758-d51b-4728-be0f-ae2c222546eb and
http://blog.greenl.ee/2009/03/25/troubleshooting-tlsexception-in-ucma-2-0-applications/
If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync -
CTS1.4.1 Samples JDBC test failing with Error in allocating a connection
Tests under CTS1.4.1 samples>>JDBC>>ee>>testConn>> are failing with the following error :
Sep 14, 2005 4:27:55 PM com.sun.gjc.spi.DSManagedConnectionFactory createManagedConnection
WARNING: RAR5113 : Error creating connection from supplied information: Reason - Error while parsing address
Sep 14, 2005 4:27:55 PM com.sun.enterprise.resource.LocalTxConnectorAllocator createResource
WARNING: RAR5038:Unexpected exception while creating resource
Sep 14, 2005 4:27:55 PM com.sun.enterprise.connectors.ConnectionManagerImpl internalGetConnection
WARNING: RAR5117 : Failed to obtain/create connection. Reason : Connection could not be allocated because: Error while parsing address
Sep 14, 2005 4:27:55 PM com.sun.gjc.spi.DataSource getConnection
WARNING: RAR5114 : Error allocating connection : [Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address ]
ERROR: SQL Exception : Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address
ERROR: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address
at com.sun.gjc.spi.DataSource.getConnection(DataSource.java:72)
at com.sun.ts.tests.samples.jdbc.ee.testConn.testConnClient.getConnection(testConnClient.java:252)
at com.sun.ts.tests.samples.jdbc.ee.testConn.testConnClient.setup(testConnClient.java:91)
But the mystery is that the main set of JDBC tests (outside of samples) in CTS1.4.1 are running fine.
One difference I notice is that the tests that are failing use "createManagedConnection".
The main configurations file "ts.jte" present under %TS_HOME%\bin has all the settings correct. Thats why the main JDBC tests go through fine.
I wonder where these failing tests pick up the bad "address" from.
Any help on this would be greatly appreciated.
Thanks !CTS is a paid product and any question regarding that should be answered by a Licencee Engineer. Pls contact the LE regard the setup of CTS or any TCK.
-
AppContainers_test fails with error during pre-test configuration checks
Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem -
Revision: 1013
Author: [email protected]
Date: 2008-03-28 17:24:25 -0700 (Fri, 28 Mar 2008)
Log Message:
Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException
QA: Yes
Doc: No
Details:
This prevents the NPE but for non-servlet endpoints you need to be sure to define your users/roles in Weblogic's default security realm. The test was failing because login was failing, most likely because the regression server wasn't fully configured.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-180
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/weblogic/flex/messaging/security/WeblogicLoginComm and.java
Maybe you are looking for
-
Error "RC-50013" in ApplyAppsTechStack for Step 3 of 5 (53% and 92%) R12 installation
I've tried to install R12 on Windows Server 2003 32-bit as well as 2008 64-bit. Both instances generated seemed to hang at Step 3 of 5: 53% total and 92% (Registering Tech Stack) I'm using Cygwin and Visual Studio 8 that were configured based on this
-
I am trying to add text to an I photo book project. I have entered the text inside the blue lines which indicate the boundaries but have got a red triangle showing I have exceeded the text. Any ideas please?
-
Hi there all, Having finished by first Java application for work, I'm trying to create an executable jar file for it. The current directory structure is: - +---- programs | | | |---- GateKeeper | |---- commonfilesThe commonfiles directo
-
This has been going on for like a month now and I've looked it up and have found nothing. When I try to open itunes, I get an error message- "AppName: itunes.exe AppVer: 7.0.2.16 ModName: unknown ModVer: 0.0.0.0 Offset: 00000000" I have deleted an re
-
Hi @all. I'm about to develop a "Plug-In" for the JDeveloper (10g/10.1.3). My aim is to open a new JDev editor window (resp. view or tab) and transfer code text from the clipboard into the new editor. But I cannot find the fitting object to instantia