Login error with windows AD authentication in IDT (Infomation Desugn Tool)

HI,
In IDT (Information Design Tool) I was not able to publish objetcs ( OLAP connections, Business View layer etc) to corresponding repository using windows AD authentication, but with enterprise I was able to do so.
With the same AD authentications I was able to open universe design tool, BI launch pad .
Please advise how to correct
Error----
Error:
Failed to log on host com.crystaldecisions.sdk.exception.SDKException$SecurityError: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
cause:java.lang.SecurityException: Unable to locate a login configuration
detail:Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006) Unable to locate a login configuration
Cause of Error:
Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
Error----
Thanks in advance
Regards
Krishna

Had the same problem and found note '1588487 - Active Directory authentication failed with InfoDesignTool'
Problem solved for me.

Similar Messages

  • Login error with BOXI 3.1

    I frequently get a login error with BO XI 3.1 (with fix patched 1.3 and SAP interface installed on Linux machine).
    ERROR:
    Account information not recognized: The property SI_GUID of info object with id number 1876 is not unique. Table = 'CMS_InfoObjects6'. Column = 'SI_GUID'.
    (authentication type: enterprise)
    Error comes after first logging out with User1 and then trying to login again immediately with User2 (with IE6).
    Thanks, Timo

    Hello again,
    Just to answer your questions:
    - Yes, all systems are in the same domain
    - I have configured BOE for SAP SSO. Users and roles have been imported.
    - The SAP Portal is sending the ticket.
    We've been able to reproduce the error over different client machines, and a workaround involves closing the browser window (with the error) that gets launched from SAP Portal on the first attempt and then clicking through to BO from the SAP Portal again. It works fine after that, but I'm afraid that some users might find this annoying/alarming
    Thanks,
    Myla

  • How to do HTTP getRequest() with windows NTLM authentication from OBPM..??

    Hello All,
    Please share your expert ideas how me can do HTTP getRequest() with windows NTLM authentication from OBPM..??
    I am not sure even whether its possible or not, if not what could be the alternative way to do integration with MS SharePoint ??
    Version : Oracle BPM v 10.3.1
    Cheers
    Parveen Jaswal

    You are only as secure as web browsing to the LogMeIn website is (which appears to use HTTPS). If your login on that site is compromised, they will have a list of your computers that they can attempt to connect to. As long as you don't save the login credentials, they would then also need to know what username and password to use to connect to the computer. Granted, a little social engineering, and they could probably get some good ideas what to try for those, but if you chose to make your computers secure with complex and hard to guess passwords then it should be fine.
    I've been using LogMeIn from my Mac to my mom's Windows XP system from July 2009, and to my wife's Thinkpad running Win 7 since Oct 2009. None of the computers involved have had any security issues at all, let alone any caused by LogMeIn. For my wife's PC, it sits behind our NAT Firewall in our LinkSys Router (although I did have it behind a CheckPoint VPN Edge router for a while). My Mom's PC sits behind a Netgear Router providing its NAT Firewall. When my Mac isn't at home, it's generally behind that CheckPoint VPN router at my office now. It all works nicely from behind one router to behind another. The Piece that you install on the PC will log it into the LogMeIN website and that is how it gets through the router to the PC. You login to the website, select the PC to control, then login to that PC.

  • Cant download itunes, because ' there is an error with windows installer package' please help?

    cant download itunes, because ' there is an error with windows installer package' please help?

    I am getting the same message when I try to install the latest version of iTunes, I am running on Windows Vista Home Premium. I have tried so many different things to try to correct this and have now completly unistalled it from my laptop..... Now I have no iTunes what-so-ever on it and still can't install it. I found an older versin of iTunes and it installed without any problems, but I can't access it because my library was created on a newer version! Talk about frustrated..... WE NEED HELP!!!!!

  • HP TouchSmart iq512sc error with windows 7 SoundMAX Integrated Digital HD Audio 5.1

    Hello I have problems with my HP TouchSmart iq512sc error with windows 7 SoundMAX Integrated Digital HD Audio 5.1 surround sound receiver conete SPDIF after update from vista 64 bit to windows 7 began this problem
    only nomal audio but no support from the surround sound of 5.1 channel SPDIF what the error may attend
    I hope you can help me
    Sincerely,
    Steve

    maybe your spdif default properties, in the supported format tab, options there are configured too high for your revceiver???
    is there an error code on your receiver?  if there is an error code check the troubleshooting section in the manual your receiver came with.
    you could also try in windows media center, go to the tasks->settings and click windows media center setup->setup your speakers for 5.1 and hit the test button..
    HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

  • Error with Windows 98

    Hello,
    My applets ran very well with Windows 2000 server but, with Windows 98, these applets don't run anymore.
    Here is the error:
    java.lang.IllegalArgumentException at sun.net.www.ParseUtil.decode(Unknown Source)
         at sun.net.www.protocol.file.Handler.openConnection(Unknown Source)
         at sun.plugin.net.protocol.file.Handler.openConnection(Unknown Source)
         at java.net.URL.openConnection(Unknown Source)
         at sun.applet.AppletPanel.getAccessControlContext(Unknown Source)
         at sun.applet.AppletPanel.getClassLoader(Unknown Source)
         at sun.applet.AppletPanel.createAppletThread(Unknown Source)
         at sun.applet.AppletPanel.init(Unknown Source)
         at sun.plugin.AppletViewer.appletInit(Unknown Source)
         at sun.plugin.viewer.LifeCycleManager.initAppletPanel(Unknown Source)
         at sun.plugin.viewer.IExplorerPluginObject$Initer.run(Unknown Source)
    Could you help me ?
    Thank you.

    after having written "java -version":
    java version "1.4.0_02"
    Java(TM) 2 Runtime Environment, Standard Edition
    (build 1.4.0_02-b02)
    Java HotSpot(TM) Client VM (build 1.4.0_02-b02, mixed mode)

  • Error with windows

    I installed windows successfully but when I inserted the leopard installation disc, the following error occurred:
    "Windows Installer Installation Wrapper
    This package requires a newer version of the windows installer. Do you want to update the version of the windows installer on your system?"
    When I clicked yes the following error message occurred:
    "The required resource 'UPDATE' is missing"
    I click OK then the installation stops. I can't see any way around this...
    Can anybody help?
    PS: I posted this earlier but something is really broken with my account and I seem to have two aliases. Sorry!

    Try this -
    When you device is POWERED ON, remove the battery for a minute, and then reinsert the battery. This make a reboot to your device which minor issues with the BlackBerry device.
    After performing about try downloading the Windows Live Messenger again.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on T61/T61p

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD. This information can help address blue screen errors specifically related to Turbo Memory, but may not solve errors related to other issues. Please read through the instructions completely, make sure they apply to your system, and after attempting the solutions please post back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad T61/T61p (14.1 inch widescreen with IEEE 1394 model) - BIOS version 1.22 (7LET52WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Message Edited by Tim_Lenovo on 11-30-2007 07:03 PM
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Thanks Tim,
    I do have my T61p fully up-to-date to the latest drivers and updates (via System Update and the Drivers&Software web page when the former is not that up-to-date).
    At the moment the most recurrent problem is this:
    http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
    which has been longly speculated here:
    http://forum.thinkpads.com/viewtopic.php?t=47755
    My other angst is the boot-time chkdsk hang-up problem:
    http://forum.thinkpads.com/viewtopic.php?t=52765&highlight=chkdsk
    I just wonder if this purely a Vista issue when using NV cache, the disk spinning down at almost exactly 1 hour from the beginning of the chdsk operation seems too much of a coincidence.
    This is my T61p configuration:
    Intel Core 2 Duo T7700 2.4GHz
    BIOS version 1.26-1.06
    4GB RAM 2 SO-DIMMs
    nVidia Quadro FX 570m with 512MB VRAM
    WUXGA LCD
    Seagate 7200.2 160 GB
    4GB RAM 2 SO-DIMMs
    Windows Vista Ultimate 32bit (waiting to move to 64bit)
    thanks,
    andrea
    Message Edited by abarbieri on 12-05-2007 03:48 PM
    T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
    T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
    This information can help address blue screen errors specifically
    related to Turbo Memory, but may not solve errors related to other
    issues. Please read through the instructions completely, make sure they
    apply to your system, and after attempting the solutions please post
    back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Dear Tim,
    First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61.  I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
    Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14).  However, the BSOD recurrs.
    For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS.  Notwithstanding that, BSOD recurrs.
    During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)).  In either case, BSOD recurrs.
    I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install.  I never install any hardware (e.g. RAM).  And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
    I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment.  In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
    My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
    Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
    Memory: 1.00 G.B.
    System: Windows Vista Business (32-bit)
    Hard Drive: 160 G.B. @ 7,200 r.p.m.
    And, of course, with Intel Turbo Memory 1 G.B.
    I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless.  I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to.  The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
    Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here.  Any advice will be tremendously and enormously appreciated.
    Kevin Chen @ Taiwan

  • Runtime error with windows 7

    Hi,
    I have a new laptop with Windows 7 and Adobe reader 10 'X' installed. I am unable to open a PDF dopcument. A box shows up titled  Microsoft visual C++ Runtime library and within the box is written 'Runtime Error Program :C... This application has requested the Runtime to terminate in an unusual way.Please contact the applications support team for more information'. I have tried to follow instruction on support for adobe but cannot find the information they are suggesting i change such as preferences etc. Can anybody help me as I do not have a good knowledge of computers and nobody to ask....

    Try the following and check if you could launch reader or not?
    1. Right click on Reader icon and choose Properties...
    2. Goto Compatibility tab and check 'Run this program in compatibility mode for'
    3. Click OK
    4. Double click on Reader icon and choose 'Open with protected mode disabled' and click OK.

  • Error with Windows NT?

    Hi,
    i just installed the JMF Performance Pack for Windows.
    When auto detecting Capture Devices, i recieve (german) 'Ordnungsfehler 6' in dsound.dll. What does this error mean? (Fehler=error)
    thanks in advance,
    JCheckBox

    Hi,
    i found the error described in another context on another site, windows nt does not support directx5, therefore the windows performance pack cannot be used with windows nt?!
    does the cross platform package solve this problem?
    regards,
    JCheckBox

  • Login error with report viewer when opening Crystal report with subreport

    Hi
    I have a problem with a login error (database vendor code 18456) when I try to open a crystal report to view it.
    The report uses data from an external payroll database but I'm running it via our Accounts system (it's a convenient front end for users to run the report from). This works fine for another report that doesn't have any subreports. However when I run the Crystal report that has subreports, the report generation process works but when the crystal reports viewer tries to open the report I get the login error. It doesn't seem to be passing the login details for the payroll database down to the subreport.
    I'm using Crystal Reports version 11.0.0.1282. The Accounts system is Technology One. Tech One have provided a report template that has several formulas designed to allow Tech One to play nicely with Crystal. One of these formulas allows me to enter the nickname of the external database that the report needs to use. The external database's connection details are fully specified in the Tech One configuration section (server console). So in this case the report says use database U1 & the server console identifies U1 as being the payroll database, specifies the connection path  & has the username & password required to logon to the payroll database/server.
    The report is running ok & retrieving data, but for some reason the viewer is erroring. If anyone has any ideas for how I can get the login details used to run the main report to flow through to the subreport it would be much appreciated.
    Thanks
    Sue

    I understand your  frustration. We can do a few things. But really, it should be Technology One contacting us. To use an analogy (which you are free to share with Technology One). They built a car and sealed the hood. You bought the car, but he engine does not quite run as it should. You bring the car to the mechanic and all he can do is look at the car as he can not even open the hood.
    In any case, here is what I would do if I could open the hood (e.g.; if I was dealing with Technology One):
    1) Look up database vendor code 18456. This is simply the error our print engine is receiving from the database client and it simply passes it through relatively unhandled. This you should be able to do your self or ask Technology One to tell you what that means.
    2) Break out the subreport and see if it runs on it's own in the application (if this is a permissions issue - which I doubt -  it should come up here too). Unfortunately, this is for Technology One to do...
    3) Run the report (with the subreport) in the CR designer. Does it work there? If this is a win app and it works, we again eliminated permission issues. And we also confirmed that the report is good. Again, Technology One should do this for you.
    BTW.; CR 11.0 is out of support - not sure if you or Technology One are aware of this...
    4) Can the developer duplicate the issue on his development computer?
    Now, there are couple of instances where you say something like; "the report works and gets data, but the viewer errors out":
    +The report is running ok & retrieving data, but for some reason the viewer is erroring.
    However when I run the Crystal report that has subreports, the report generation process works but when the crystal reports viewer tries to open the report I get the login error.  +
    How do you know the report is retrieving data? From the error I would say the report never connects, thus the error / request for a logon...
    So, the short of all of this is; get Technology One to contact us. They can do it over the forums or obtain a phone case here;
    http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100
    Now, here is a warning. As CR 11.0 is out of support Technology One will have to upgrade to CR 11.5, before that can create a phone case, which for them and you brings up another bunch of issues...
    If you do not get any joy from the support person at you are talking to at Technology One, get him to escalate the issue. They are the ones that should be talking to us...
    Ludek

  • Network Error with Windows 7

    Hi,
    Has anyone come across following error?
    I had a ThinkPad X201 with Windows 7 get this error after it has been updated with Windows Patches. Was fine before the patches.
    Also found error when trying with Net Use command.
    Regards

    Hello,
    I am guessing there was a network share listed in the screen image that was edited out, correct?
    First, try running the FixIt program from Microsoft Knowledgebase Article #910336, "You receive a "0x80070002" or "0x80070003" error code after you download an update from Windows Upda...". 
    If that does not solve the problem, try deleting the network share on the computer, then recreating it using 'Advanced Sharing'.  Does that make any difference?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Microsoft Outlook 2007 send/receive error with windows 8.1

    I do have an IDEAPAD LENOVO with windows 8.1
    Today, i made some updates to my laptop/tablet, and i have problems with the send/receive error on my Microsoft Outlook 2007, before that it was working fine.
    Someone in the community know how I can fix it.
    Thank you,
    Moky

    Hi,
    What's the error message content you got? Please provide us more information about this problem so that we can resolve it more efficiently.
    Meanwhile, please refer to the following KB article and follow the steps to troubleshoot the issue:
    http://support.microsoft.com/kb/813514/en-us
    Hope it helps.
    Regards,
    Steve Fan
    TechNet Community Support

  • D3dx9_42.dll error with windows 8.1

    Hi 
    I just got my new pc with windows 8.1 and when I try to play games (In this case with Civ 5) I get a 
    d3dx9_42.dll error, 
    I have read that you can fix this by installing the latest DirectX drivers but windows 8.1 install DirectX with windows update so I cant find a download for 64 bit windows 8.1. 
    Please help

    Any idea on the following dump? I am getting a BSOD every 30 minutes or so. I am running Windows 8.1 on an HP machine.
    Log Name:      System
    Source:        Microsoft-Windows-WER-SystemErrorReporting
    Date:          2/13/2014 8:28:29 PM
    Event ID:      1001
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      CRL
    Description:
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x00000109 (0xa3a01f58a0b665ab, 0xb3b72bdef3359b5e, 0xffffe0000110d0d0, 0x000000000000001c). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 021314-12921-01.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
        <EventID Qualifiers="16384">1001</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-02-14T00:28:29.000000000Z" />
        <EventRecordID>24048</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>System</Channel>
        <Computer>CRL</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="param1">0x00000109 (0xa3a01f58a0b665ab, 0xb3b72bdef3359b5e, 0xffffe0000110d0d0, 0x000000000000001c)</Data>
        <Data Name="param2">C:\WINDOWS\MEMORY.DMP</Data>
        <Data Name="param3">021314-12921-01</Data>
      </EventData>
    </Event>

Maybe you are looking for