Login Failed - Publish to YouTube
anyone know why I get this error on two different computers trying 5 different credentials?
Hi,
Are you trying to publish directly from Captivate. In this case there are chances that the publish will not work. This is a known issue and we are working on this. I insist you should opt following workflow to publish the content to youtube.
1) Publish content as mp4 to your system.
2) open youtube in browser and then upload it from there.
Why the direct publish is failing as there is some issue with the authentication part.
Please opt the workaround and let us know if issue still exist. if exist then please provide the steps you opted.
Thanks and Regards
Shriyansh
Adobe Captivate Team.
Similar Messages
-
Publishing to YouTube Failed: The request timed out.
Why do I get "Publishing to YouTube Failed: The request timed out." when trying to load to YouTube. It doesn't happen all the time, just once in a while but it's been happening everytime for the past week!!
I am using the pre-set drop down feature - Share to YouTube.
Help! Thanks.Just trying the upload from the desktop: 'Uploading your video. 2616 minutes remaining.'
Am also doing another export using H264 to see if that is quicker. It's only 15mins of footage. -
OBI publisher on Jboss Server AS7 [login failed]
Hi, I've deployed OBI publisher on Jboss Server AS7 but when i try to authenticate with Administrator/Administrator the response is login failed. Thanks for your support i'm blocked
Thank you for the replies and I am trying to answer the questions in your replies here
Kranthi : To open in online mode,the BI server should be up so it accepts the password and then directs you to the layout. That is the case, I have OBI server up running and accept login from Answers page.
Kranthi: first you should go through about offline/online modes before proceeding further.You can go through this from the BI answers user guide. The BI Answers user guide I found is OBI Answers, Delivers, and Interactive Dashboards User Guide, B31767-01 for Version 10.1.3.2. I could not find info for security management or login/password. Can you be more specific?
Srinivas Malyala: Cross check are you accessing Linux Box rpd on WindowsWhich credentials are you using LDAP or DB etc
Have you properly configured DSN to access Linux RPD. >
I am not sure how OBI RPD authenticate logins. I am not using LDAP. I do not have a user Administrator in my Oracle database. Thus it does not appear authenticated with DB.
I have a DSN configured on the window box, and be able to import database objects.
Srinivas Malyala: Can you update us exact error message. The only message is "Logon failed." Too bad I cannot attach a file to show the message box. But you can get the same message when you login to the window Admin Tool online or offline with a wrong password.
OBIEE developer : chk whether the rpd property is read only.. How? But I know if I open it offline, it it says the rpd is read-only. That is because it is opened by the server.
OBIEE developer : or try this once if all fails to reset the pass..http://obieetricks.blogspot.com/2009/08/obiee-tips-tricks-for-ease-in.html >
Like to try it but afraid get things more confused before I understand what is going on. I have not loss my Administrator password, I can login offline, I can login to SH Answerers pages.
Is offline suppose to have the same password as online? -
Publishing to YouTube Failed: Timed out!
I need help.
I upload videos edited in FCPX to Youtube via the 'share' option, sometimes it works but other times it doesn't and an error message pops up saying 'Publishing to YouTube Failed: Timed Out'. In my video manager page on YT it say's 'failed to convert file' but I don't use anything differently on most of my videos. How can I stop this from happening?Hi Brian,
I gave up going direct from FCPX and instead went through Compressor by exportiing as an H.264 file. In Compressor I chose the YouTube files as the destination files and they went just as they should. Still peeved that I couldn't go directly from FCPX but it is just a small few steps to go through Compressor. If you don't have Compressor I would highly recommend you get it as it provides a huge range of files to convert to.
Cheers!
Turiteabend -
I am getting the following error in iMovie when I attempt to publish a video clip to YouTube: Publishing to YouTube Failed: The operation couldn’t be completed. No such file or directory. Any ideas about what is going on? I did not find anything directly related to this on general google search...
I'm not certain why this error is coming up, but I have almost 500 youtube videos on youtube, all created through the years with iMovie.
Here is what I find. The publishing tool through iMovie is very sketchy, and doesnt work well most the time. Plus you usually lose alot of quality. Go to File>Share>File. This will then save it as a file to wherever you want. Then when you go to upload on youtube, select this file. -
Saving "Publish To Youtube" login details (4.1.1)?
Hi there,
I wanted to use the "Actions" feature of Compressor to automatically publish to Youtube after encoding, and it does physically function, but I'm having a bit of an issue.
In both cases, whether I use the "Built-In" preset (which is stuck at 720p), or if I create a custom one (for 1080p videos and a custom encoding profile), once I close Compressor, the username and password fields are empty when I re-open Compressor for the next encode.
Is there a way to make the username and password "stick" in the application? The "Title", "Description", "Tags" and "Category" maintain their values, but Username and Password don't!
It is a pain because I use 2-step authentication for my Google account, so I use an application-specific password for Compressor and I've had to keep a note "Notes" to paste the password which is much less-than-ideal.Thanks Russ,
I actually called up Pro App Support and spent about an hour on the line with them, while we tried various different ways to make it work, including duplicating the "issue" / "missing feature" on their own copies of Compressor.
As far as I could tell, it's not possible in 4.1.1 but the engineer believed it should be possible, by way of a "remember my login info" checkbox in a similarly-implemented way to how it is in FCP X for consistency across the Pro Apps at the very least.
As far as uploading via FCP X or Compressor vs. the site's uploader for speed, I monitor my traffic via Little Snitch and I see it max out my connection (25Mbps) no matter which method I use. I just think it would be great if I could upload immediately after encoding. =)
-Justin -
I have been updating my site over the last week, using Iweb SEO TOOL, but suddenly 2 days ago I can no longer update when i go to publish it says "invalid password "on Iweb Test. and on SEO Tool, Login Failed Login Authentication Failed, the password and all settings are correct.
I am 100% sure the all the setting are correct, as it has been working for the last 7 months and I have just been updating it, then suddenly it stopped, I have all the FTP settings wrote down, and even changed the passwords twice hoping that may work to no avail.Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again. -
SqlException was caught: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
Hi,
I have deployed an On-Premise SharePoint solution with event receiver to update external SQLDB. I'm using Visual Studio 2013 to create a SharePoint 2013 project on the same machine where SharePoint 2013 server is running. I was able to create
new items, but unable to update/delete. My event were fired accordingly however got choked on sqlConnectionlOpen() when attempting to update/delete with the following exception:
SqlException was caught: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
Why would SharePoint uses SharePoint web application account my admin created to create and assumes NT AUTHORITY\ANONYMOUS LOGON account for update\delete? Any idea how to fix?
Appreciate your help.I'm new to SharePoint development. I'm not familiar with SharePoint object model. Do I need to use it for working with external data? I used SPSecurity.RunWithElevatedPrivileges
block like you have suggested and is now working fine for both update/delete =)
My project is to develop a SharePoint site to work off external SQL DB. I tried BCS approach to work with external data but that didn't allow workflow/task feature.
Besides, there is no delete event where I can manually sync with external data when an item gets deleted when using SharePoint 2013 Designer. So using event receiver with SharePoint solution in VS2013 is the solution. Now that I am able to
propagate changes to external data store on item events, the new challenge is how do I over come SharePoint deployment conflict resolution (default? enforcement?) as each publish automatically deletes existing items in my lists and recreate? In another word,
I'm trying to replicate SharePoint list to external data store each transaction to keep them sync. Any thought would be greatly appreciated. -
UPerform - Login failed for uPerformSystem
Hi,
I'm working with SAP Productivity Pack and Ancile uPerfom 5.10 and I'm having an issue, while trying to publish a document, the document cannot be seen by the end user.
Checking the logs I found the following errors,
CollabConsole:
[16-Sep-2014 11:29:57 (TP-Processor3_8)]: Login failed for uPerformSystem
[16-Sep-2014 11:29:57 (TP-Processor3_8)]: Login failed for uPerformSystem
ServerErrors:
<RoutineNamespace>ANCILE.uPerform.CMS.Vignette.GetDocumentStatus</RoutineNamespace>
<FriendlyMessage>An error occurred while retrieving document status.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.HttpWebRequest.GetResponse() at ANCILE.uPerform.BusinessObjects.WebClientWrapper.DownloadDataNoRedirect(Uri address) at ANCILE.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, Dictionary`2 postData) at ANCILE.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at ANCILE.uPerform.CMS.Vignette.GetStringFromServer(String uri, CredentialSet CredentialsToUse, String postData) at ANCILE.uPerform.CMS.Vignette.GetDocumentStatus(String DocumentGUID, String& AdditionalInformation, CredentialSet CredentialsToUse)</StackTrace>
Any Ideas on what user/authorization is missing here?.... I checked db user rights and permissions on the Collaboration file system and the error persist.
Regards, JuanI found SAP Note 2000450 - Error message in Collabconsole.txt file "Login failed for uPerformSystem"
Created the uPerformSystem user and updated the integration credentials and it works just fine.
Regards, Juan -
Publish to YouTube often crashes Captivate 5.5
I'm publishing a number of projects to YouTube. Often this crashes Captivate 5.5 before it gets to the YouTube login prompt. Sometimes trying again (without changing anything) works, but often it takes several tries. I don't know why it works when it does or what might be causing the crash.
Has anyone else experienced this? Any idea why or how to prevent it?
Thanks!
Captivate 5.5
Windows 7 32 bitI called Adobe Support and spoke to a very helpful gentleman by the name of Vishal Jaswal. He was wonderful in helping me understand what the issue may have been. <-- Best Adobe support experience to date!
1. First, he created a new project in Captivate 5.5 (blank project) and uploaded to YouTube. It worked.
2. Next, he copied half of my project into this blank project and uploaded. We waited patiently and lo and behold, it worked!
This tells me something is wrong with the preferences/settings in my project, so by copying and pasting my slides & audio into the new project, I was able to successfully publish to YouTube.
Try this approach to your project.
Hooray!!!!
Jeremy -
Facebook social sharing - login failed error
I have setup my app for social sharing following the http://helpx.adobe.com/digital-publishing-suite/kb/setting-dps-app-social-networking.html instructions
However, when I test my development app, whilst it allows me to select Facebook from the social sharing drop-down, and gives the option to allow Facebook to access my basic profile info and list of friends, once I have done this, I then get the following error message:
"Login Failed. Please log in to Facebook and authorize "app name" through the iOS device settings or through the Facebook iOS application".
I have also found I get the same error when I try to share from other downloaded 3rd party newsstand publications - though not all of them? So am not sure whether this is something to do with:
1. how I've configured social sharing in my app (and if so, then other publications have also incorrectly configured theirs)
2. the settings on my own iPad - although these all seem to be in order, my app name doesnt appear in my Facebook settings to enable me to authorise login
On previously speaking with Adobe Support - I understand that I only need to register an app with Facebook to get an App ID, rather than fully create a Facebook app and get this approved (A process which I understand takes months?)
On re-reading the instructions, I have not yet completed the additional suggested Facebook SDK configuration "Implement Single Sign-On (SSO)" via XCode. Just wondering before I embark on this if this is actually the issue?
Would be very grateful for any advice/clarification on the above
Many thanksI tried a few things, but I'm not entirely sure exactly which of them resolved it:
1. I began by starting the "Implement Single Sign-On" instructions by following the links at the bottom of the Adobe instructions page under "Additional Facebook configuration information"
http://helpx.adobe.com/digital-publishing-suite/kb/setting-dps-app-social-networking.html
https://developers.facebook.com/docs/tutorials/ios-sdk-tutorial/#implementsso
https://developers.facebook.com/docs/getting-started/facebook-sdk-for-ios/
I completed steps 1 - 5 on the last link - but stopped at the step 6 - start coding - as this got a bit beyond me (I'm not a programmer!)
2. I then looked back at the settings in the Facebook app, and under permissions, changed the Default Activity Privacy to Public, and the Auth Token Parameter to URI Fragment (#acces_token=...)
I would perhaps try adjusting your FB settings first and see if this solves it before trying the Xcode route.
(I fed my findings back to Adobe Support to see if they could shed any light on this, but heard nothing back).
Please let me know how you get on and if this works for you
Kind regards
Sharon -
SSL VPN, "Login failed" and "WebVPN: error creating WebVPN session!"
Hi,
Just ran the wizard for Anyconnect SSL VPN, created a tunnel group, a vpn pool and added user to it. When trying to logon on the SSL service, it simply says "login failed". I suspect that the user might not be in correct groups or so?
some relevant config
webvpn
enable wan
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
group-policy vpnpolicy1 internal
group-policy vpnpolicy1 attributes
vpn-tunnel-protocol svc
tunnel-group admins type remote-access
tunnel-group admins general-attributes
address-pool sslpool2
default-group-policy vpnpolicy1
username myuser password 1234567890 encrypted privilege 15
username myuser attributes
vpn-group-policy vpnpolicy1
Debug:
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-867034168) and nh (-849922864)!
webvpn_add_auth_handle: auth_handle = 17
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
webvpn_session.c:http_webvpn_create_session[184]
WebVPN: error creating WebVPN session!
webvpn_remove_auth_handle: auth_handle = 17
webvpn_free_auth_struct: net_handle = CD5734D0
webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_free_auth_struct: net_handle = CD5734D0AnyConnect says:
"The secure gateway has rejected the agents VPN connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists.
The following message was received from the secure gateway: Host or network is 0"
Other resources indicate that it's either the tunnel group, or the address pool.. The address pool is:
ip local pool sslpool2 172.16.20.0-172.16.20.254 mask 255.255.255.0
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# debug http 255
debug http enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-845538720) and nh (-828624376)!
webvpn_add_auth_handle: auth_handle = 22
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
HTTP: net_handle->standalone_client [0]
webvpn_session.c:http_webvpn_create_session[184]
webvpn_session.c:http_webvpn_find_session[159]
WebVPN session created!
webvpn_session.c:http_webvpn_find_session[159]
webvpn_remove_auth_handle: auth_handle = 22
webvpn_portal.c:ewaFormServe_webvpn_cookie[1805]
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
HTTP: Periodic admin session check (idle-timeout = 1200, session-timeout = 0)
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CC894AA8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
Close 1043041832
webvpn_free_auth_struct: net_handle = CC894AA8 -
Login Failed error while creating a CR using Universe
Hi,
We created an Universe in SAP Business Objects system using SAP BW as source system and we selected sales cube for the universe.
For ex universe name is : xyz
Now i want to use this universe in crystal reports, we are using CR2008.
I logged in to Crystal Reports>Blank Report>Create New Connection>Universes>selected xyz universe and i got the keyfigures and chars in query panel for the selected universe, dragged and dropped some chars and kf's in to result objects.
After this when we click Ok it is giving an error message saying that Login Failed
We are unable to get the solution for this anybody please guide us to solve this.
Regards,
Pradeep.BHave you checked out this article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504a541a-8a1e-2b10-efa6-af8fb3d44e07
It has a section on troubleshooting Universe connections. -
Intermittant (not constant) SQL database ShareWebDb login failed events 3760 and 2424
My Sharepoint 3.0 services that were bundled with SBS 2008 appear to be working fine. Companyweb, etc, all work w/o issue, so I don't want to take violent action, but these errors seem to be accellerating so I would love to know if there is a known
solution.
I typically receive the following (these are in reverse time order, latest at the top, just as they appear in the event log):
Error Event ID: 3760 SQL Database 'ShareWebDb' on SQL Server instance 'np:\\.\pipe\MSSQL$Microsoft##SSEE\sql\query' not found. Additional error information from SQL Server is included below. Cannot open database "ShareWebDb" requested
by the login. The login failed. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
one second earlier:Error Event ID: 2424 The update cannot be started because the content sources cannot be accessed. Fix the errors and try the update again. Context: Application 'Search', Catalog 'index file
on the search server Search'
Information Event ID: 18456 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="49152">18456</EventID>
<Level>0</Level>
<Task>4</Task>
<Keywords>0x90000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:06.000Z" />
<EventRecordID>491461</EventRecordID>
<Channel>Application</Channel>
<Computer>myserver.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
<Data>[CLIENT: <named pipe>]</Data>
<Binary>184800000E000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
Two seconds earlier
Information Event ID 17137 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="16384">17137</EventID>
<Level>4</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:04.000Z" />
<EventRecordID>491460</EventRecordID>
<Channel>Application</Channel>
<Computer>mysever.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>ShareWebDb</Data>
<Binary>F14200000A000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I get more 3760 errors than 2424's. However, the
2424's do seem to usually correspond to a 3760 18456 17137 occurance and the
3760 are always preceeded by 18456 17137. I was getting one or two sets a day, lately that has increased to 5 or 10.
I've done a lot of
web research on Sharepoint Errors 3760 and
2424 and I see a number of people are experiencing the the same issue. Most of what I've come across for solutions do not apply, since errors are intermittent, not chronic and my public remote URL has already been added
to BackConnectionHostNames as per:
http://blogs.technet.com/b/sbs/archive/2009/08/05/sharepoint-services-3-search-event-errors-after-an-sbs-2008-update-rollup.aspx
I installed the SQL Server Management Studio Express so I could try to track down the permissions on this database. I see the SQL server instance, MYSERVER\Microsoft##ssee, and it shows as running, but when I try to connect to it I get the following
error: "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote
connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)" I'm assuming that is because I don't have access permission for that internal database.
I don't see any errors in the event log related to failed logins or any errors at all from the SQL server, but there are the time matching informational entries right before the error events and lots of other 17137's and 2803's from MSSQL$Microsoft##sseeThank you Kevin, that does seem to match my symptoms and I have made the change suggested. Just incase that page becomes unreachable by others, here is the part of the page that applies to this:
Issue:
=========
Receive event error 3760 and 6398 on SBS 2008
Cause:
==========
Issue was caused by incorrect Auto Close option for ShareWebDb database
Solution:
==========
1. On the SBS 2008 server, click Start -> All Programs -> Microsoft SQL Server 2005, right click SQL Server Management Studio Express and choose run as administrator.
NOTE: You must run it as administrator to perform steps below.
2. In the Server Name box, type \\.\pipe\MSSQL$Microsoft##SSEE\sql\query, click connect.
3. Expand Database node and right click the ShareWebDb then choose properties.
4. Click Options in the left pane, in the right pane, please check whether the Auto Close option is set to True, if so, please change it to False. -
In Portal Anonymous mode - Change password option not coming- login fails
Hi Experts,
We are having some application which requires login in anonymous mode. When we click the application and give the user id password, it loggs in properly, there is no problem in that.
But if the password is reset by administrator, then when entering the reset password given by admin it should ask to change the password. This is happening in normal scenario(/irj/portal), but when try the same in anonymous mode(irj/portal/anonymous) where the prompt is from the login required application, then it says login failed instead of giving the change password and confirm password screen.
Appreciate your help in solving this issue. I hope many would have faced similar situation.
Thanks
YusufHi Yusuf.
Do you use a standard or custom login module for your application?
More likely the used login module does not have a logic that handles such scenario as a change of user's password.
In this case you need to implement a custom module with a required functionality.
Best regards,
Aliaksandr Zhukau
Maybe you are looking for
-
ICloud with personal email - Calendar Event Sharing
Calendar event sharing seems to be a pain for a lot of people especially because of the new iCloud and even more so if you are a legacy .Me or .Mac user. First of all if you are a first time iCloud user and you entered your own personal e-mail addres
-
When I try to play songs from itunes, I get an error message that my computer is not authorized. My songs have all played in the past. This is something new. I verified my computer is authorized, and when I try to re-enter the password, it tells m
-
Problem Installing Oracle Linux 6.3 - 'Disc not found message box'
I'm trying to install Oracle linux on a old laptop. Single disk drive. I downloaded V33412-01Oracle Linux Release 6 Update 3 Boot iso image for x86_64 (64 bit) burned it as an ISO image on a CD. Inserted the CD,started the system, cd booted and the i
-
How do I call in to a support line?
I have been waiting on and on and on to get a reply on how to reactivate my account with a new credit card. This seems like an easy issue to resolve, one that doesn't require me waiting for a chat forum agent to respond, and then miss it if I leave
-
Installing scanner on windows 8
I am trying to install a hp 4370 scanner on my hp windows 8 computer. it does not work ?? I have the disk but it does not completthe install. Is there a problem with windows 8 and olded devices?? It installed my older hp printer w/ no problems.