Login failure without feedback

I have installed OiD 2.1.1 successfully with its own database.
from the prompt i ran the following commands to run OiD server :
oidmon connect=second sleep=10 start
oidctl connect=second server=OIDLDAPD instance=1 start
after that i made sure that the OracleDirectoryService is running in windows 2000 services.
THE PROBLEM is that when running OiD Manager and writting id "cn=orcladmin" and password "welcome"
in the login dialog and clicking "login" button it gets dimmed and the message "connecting..." appears and lasts forever
without any response or feedback.
I am asking if any step in installation is missing ????

Try marking the flag "SSL-enabled" in the login dialog and select the SSL-port.

Similar Messages

WebAccess Login Failure

Hi all.
I just finished recreating my certificate authority as it's certificate had expired. I then used PKIDiag and tckeygen to renew the DNS and IP certs for webaccess and re-export the key for Tomcat. This went smoothly without any errors.
However, when I try to log in to web access, I get the following error: "Please login again. You may have typed your name or password incorrectly. Remember that passwords are case sensitive.", even though they are the correct name and password. It also does not matter which user logs in.
Webaccess logs only show "Login failure" for the user.
Where do I begin to troubleshoot this? Does webaccess have better logs somewhere? Even on verbose the logs still only seem to show Login Failure.
Thanks for any information anyone has.
Scott
Scott Schaffer
Network Admin
Olive Waller Zinkhan & Waller LLP

Thanks for the info Laura.
I checked my settings. Under the PO object, both LDAP and eDirectory authentication are enabled. Should this only be one or the other? If i I disable one, do I need to restart anything for the change to be seen?
As for the ldap server object. it is pointing to the der cert I exported from the private key of the CA after recreating it. Do I need to restart ldap for it to use the new exported der file? It has the same name as the old one.
Thanks,
Scott
Scott Schaffer
Network Admin
Olive Waller Zinkhan & Waller LLP>>> On March-31-13 at 9:16 AM, in message <[email protected]>, laurabuckley<[email protected]> wrote:
Further to what I said above.... In ConsoleOne click on Tools |
GroupWise system operations | LDAP Servers | Select the LDAP
server/servers that you are using and click on Edit - in there you will
see if SSL is enabled and what certificate you are using.
Cheers,
Laura Buckley
Technical Consultant
IT Dynamics, South Africa
http://www.itdynamics.co.za
laurabuckley's Profile: http://forums.novell.com/member.php?userid=122
View this thread: http://forums.novell.com/showthread.php?t=465411

SSL VPN Login failure issue

Hello,
I am having an issue with some users trying to login to our SSL VPN (Anyconnect) via ASA5505 8.2(1). Authentication is done via AD. From the same computer, the client finds the DNS name and unlocks the login username and password. When I enter a username and password and click connect, it is instantly rejected with login failure with the following event log:
Function: ConnectMgr::setPromptAttributes
File: .\ConnectMgr.cpp
Line: 2657
Invoked Function: setPromptAttributes
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Error text:
Login failed.
If I change the user account to another user (from the same PC), login works perfectly fine - this is only happening with 3 or 4 users - I have compared the user accounts of a failing account and a successful account and they are identical in AD.
This has been driving me crazy - as a work around for the failing users, I just created a temporary account which works perfectly fine. The request doesn't even seem to hit the ASA (there is nothing in the logs that show a failed attempt). Still troubleshooting and looking at certificate's at this point. Any help/suggestions would be greatly appreciated!! Thanks.
Regards.
After a little more testing, seems somehow related to users being in to many groups in AD.
Message was edited by: Rich Viola

Hello,
If the website is unavailable or in this case, the website is missing several characters(charts, canvas, etc or some other objects), usually could be an issue with the rewrite engine.
Solution (workaround):
You may use smart tunnel for this website, so the rewrite engine will not override any content, and it will display the website as it should.
You can implement it as follow:
Add a Bookmark
Bookmark for the service and clicking the Enable Smart Tunnel option in the Add or Edit Bookmark dialog box.
For further information you can find it here:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa83/configuration/guide/config/webvpn.html#wp1272236
Let me know how tit works out!
Please don't forget to rate and mark as correct the helpful Post!
David Castro,
Regards,

How do I add a custom trusted certificate to a user's login keychain without needing the user's interaction?

In using ARD I can send the certificate to the user's desktop and install the Lync application but so far the only way I can get the certificate into the user's login keychain is by having them enter their password. This of course becomes inefficient when having to adminster 75 systems.
Which command can I send to the individual systems to store the certificate into their login keychains without having them to verify their password?
Any and all help is greatly appreciated

unfortunately no, MS Lync references the user's login keychain - at this point I can run a command through ARD that allows me to move the cert into the keychain and have the cert accept a password from the root account but now the problem is finding a command line to change the default trust settings to 'Always Trust'

After creating a contained database, getting a login failure error while trying to connect to it.

After creating a contained database and a user with passowrd under the same database, I tried connecting to the contained database. I entered the server name, login credentials and went to the connection properties tab to select the contained database using
<browse server> option under "connect to database". Here I get the login failure error.
TITLE: Browse Server for Database
Failed to connect to server <servername>\<login>. (Microsoft.SqlServer.ConnectionInfo)
But when I manually enter the Database name instead of selecting from the <browse server> option the connection gets through.
Is this a Bug ? Has anyone else faced this error?

Hello,
Is this a Bug ? Has anyone else faced this error?
It's not a bug, it's working as intended. Contained users don't have instance level permissions and cannot "login" to the instance (which is what the "browse" button is attempting). In order for it to work, the database name must be in the connection string
(which with the browse button, it will not be).
Welcome to contained users, they aren't for everyone.
Sean Gallardy | Blog | Microsoft Certified Master

SQL Server 2012 syspolicy_purge_history job causes cross-instance login failures w. EraseSystemHealthPhantomRecords

I have unique service accounts set up for multiple instances on the same SQL Server 2012.
When step 3 of the inbuilt syspolicy_purge_history job(Erase Phantom System Health Records) runs, it appears to attempt to run against every instance on the server despite being passed the instance path!
The SQLServer's powershell script call:
if ('$(ESCAPE_SQUOTE(INST))' -eq 'MSSQLSERVER') {$a = '\DEFAULT'} ELSE {$a = ''};
(Get-Item SQLSERVER:\SQLPolicy\$(ESCAPE_NONE(SRVR))$a).EraseSystemHealthPhantomRecords()
so with instances SERVER\X this runs as...
(Get-Item SQLSERVER:\SQLPolicy\SERVER\X).EraseSystemHealthPhantomRecords()
SERVER\X's job will run and I will see login failures in the error logs of SERVER\Y and SERVER\Z for the service account set up for instance X.
It seems Microsoft's only 'accepted solution' to this problem is for me to compromise my security by escalating the access of these service accounts?
Has anyone else run into and corrected this failure?

Hi Atombath,
When you install multiple instances on one Server, and the SQL Server’s powershell scripts are the same in inbuilt syspolicy_purge_history job steps. However, when you start PowerShell by right clicking
syspolicy_purge_history job, you will find it will point to their own instance. I do a test in my SQL Server 2012,
it will not across instance to collect the error logs. So I recommend you use its original powershell scripts for the syspolicy_purge_history job.
Sometimes, if you run the syspolicy_purge_history job on a clustered instance, the syspolicy_purge_history SQL Server Agent job may fail due to using the computer node name instead of the virtual server name. For more information, see:
http://support.microsoft.com/kb/955726/en-us
In addition, you can use different service account for your multiple SQL Server instances on the same Server. And make sure the accounts that you created get added to the sysadmin fixed server role, the accounts are also set in the three Agent roles (SqlAgentUserRole,
SqlAgentReaderRole, and SqlAgentOperatorRole).
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Historical Reporting Client Login Failure - UCCX 7.0(1)

We're experiencing intermittent login failures with the Historical Reporting Client, extract from the log file below:
1: 28/04/2010 11:58:25 %CHC-LOG_SUBFAC-3-UNK: Error # 35761 ,Description= Request timed out ,LastDllError= 0
2: 28/04/2010 11:58:25 %CHC-LOG_SUBFAC-3-UNK:Authentication response was NOT received from (http://<ip address>/histRepWebSrvrComp/histRepClientsServlet)
3: 28/04/2010 11:58:25 %CHC-LOG_SUBFAC-3-UNK:Login Error | Invalid server name or IP address. Check the server name or IP address and login again.
4: 28/04/2010 11:58:30 %CHC-LOG_SUBFAC-3-UNK:Authentication response was NOT received from (http://ip address/histRepWebSrvrComp/histRepClientsServlet)
5: 28/04/2010 11:58:30 %CHC-LOG_SUBFAC-3-UNK:Login Error | Invalid server name or IP address. Check the server name or IP address and login again.
6: 28/04/2010 11:58:30 %CHC-LOG_SUBFAC-3-UNK:Connection to web server failed due to: 12017 : Operation cancelled
7: 28/04/2010 11:59:05 %CHC-LOG_SUBFAC-3-UNK:Connection to web server failed due to: 12017 : Operation cancelled
8: 28/04/2010 11:59:05 %CHC-LOG_SUBFAC-3-UNK:Failed to load authentication response due to empty XML buffer from authentication servlet)
9: 28/04/2010 11:59:05 %CHC-LOG_SUBFAC-3-UNK:Login Error | Invalid server name or IP address. Check the server name or IP address and login again.
Does anyone know why this may be happening as it's driving the customer mad. User can usually login after a few attempts.
The authentication timeout is set to 15 seconds, surely this is more than enough time or should we increase the timer?
Any advice much appreciated.

Hi Robert
Thanks for the response and all very good suggestions which should help Chris narrow down his particular issue.
It's been about a year since we last looked at this so I'd quite forgotten most of the diagnostics we'd done however we did go through most of the same diagnostics ourselves but the resolution was hampered due to the fact we support the telephony/WAN and another third party supports the desktops and LAN infrastructure so after months of to and fro with the customer and their third party (and many, many man hours) we eventually left the risk with the customer and investigations never progressed any further.
1.) Upgrade to UCCX 7.0SR5. This is a very stable release of code with few open bugs or caveats against it.
            - Agreed. We also ran into other bugs which required an upgrade.
2.) Verify that the active NIC is indeed at the top of the bindings order. Just having it active isn't enough, there needs to be the further test of moving to the top of the bindings order.
            - We did check this.
3.) Verify that the hosts file on the UCCX server(s) has the external IP and hostname of the server in it.
            - Did this too.
4.) Check the remote locations to verify that the network is correctly configured, there are no line errors on the WAN circuits, no misconfiguration on the switch/router ports and that QOS is in place across the network.
            - This part of the investigation stalled due to another 3rd party supporting the onsite network however no WAN issues were found.
5.) Try to take a test system that is on the same network as the one having HRC errors. See if it's seeing the issues. If not, progressively move out to other offices/locations until you replicate the issue and then see what has changed. Something there should hopefully point to the cause of the error.
            - We did this also, using my laptop I connected from various locations and even when using the same network connection as the end user had no problems, we did note the successful connection attempts used a slightly different network route/DNS/WINS however again got nowhere with the third party supporting this aspect of the network.
6.) Finally, you may want to consider creating external data warehouse servers so that your UCCX servers aren't serving up the HRC data.
            - Not an option for this customer, again this aspect of the service is a different third party on their own network and customer not willing to pay for additional servers for the telephony estate to provide this functionality when they only have a few CCX users.
Regards
June

How to see / limit consecutive login failures?

Hi, our server is running 10.4.7 server.
In terms of hardening the machine against attacks, is there be default a limit to the number of failed logins that occur before an account is locked in some way?
If not, is there a way to turn ON that security feaure?
Where are login failures logged?
Thanks!

Yes, you can set a limit to login failures. The following assumes that you are using Open Directory and that your users are authenticating against the server's Open Directory database.
For global policies =
Open Server Admin > for the proper server select Open Directory > select Policy > select Passwords > adjust settings
For a single user = this will override global policies listed above
Open Workgroup Manager > browse users > select the account you wish to manage > Select the Advanced user settings > select Options > dialog box gives ability to limit access in a variety of ways.
Authentication is logged =
Server Admin > Open Directory > Logs > Password service server log

SP15 in Java engine failed, "Login Failure: all modules ignored"

Hi
During the installation of sp15 (with JSPM) failed, the sdm log shows:
ERROR: Cannot connect to Host: [hostname] with user name: [J2EE_ADMIN]
My instance was down so I started but now there is an error, when I try to log on to User management it give me the error: "Login Failure: all modules ignored".
I checked the logs for the server and found the following:
#1.5^H#0000000000000067000000250000596D00045A79FA4B224F#1225379843613#com.sap.engine.services.security.resource.ResourceHandl
eImpl#sap.com/com.sap.security.core.admin#com.sap.engine.services.security.resource.ResourceHandleImpl#J2EE_GUEST#0##n/a##da7
065c0a69511ddb438000000000000#SAPEngine_Application_Thread[impl:3]_15##0#0#Error#1#/System/Security/Audit/J2EE#Java###ACCESS.
ERROR: Authorization check for caller assignment to J2EE resource [ : : : ].#4#SAP-J2EE-Engine#session-pool#ge
t_session_pool#ALL#
#1.5^H#0000000000000067000000260000596D00045A79FA4B32AC#1225379843613#com.sap.engine.services.security.authentication.loginco
ntext#sap.com/com.sap.security.core.admin#com.sap.engine.services.security.authentication.logincontext#J2EE_GUEST#0##n/a##da7
065c0a69511ddb438000000000000#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###Caller not authorized.
[EXCEPTION]
#1#com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
        at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:627)
        at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:513)
        at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
        at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java:119)
        at com.sap.engine.services.security.server.AuthenticationContextImpl.getSessionPool(AuthenticationContextImpl.java:39
5)
        at com.sap.engine.services.security.server.AuthenticationContextImpl.getLoginContextFactory(AuthenticationContextImpl
.java:740)
        at com.sap.engine.services.security.server.AuthenticationContextImpl.getLoginContext(AuthenticationContextImpl.java:2
54)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at com.sap.engine.system.SystemLoginModule.initialize(SystemLoginModule.java:72)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at javax.security.auth.login.LoginContext.invoke(LoginContext.java:662)
        at javax.security.auth.login.LoginContext.access$000(LoginContext.java:129)
        at javax.security.auth.login.LoginContext$4.run(LoginContext.java:610)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.login.LoginContext.invokeModule(LoginContext.java:607)
        at javax.security.auth.login.LoginContext.login(LoginContext.java:534)
        at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.getLoggedInUser(SAPJ2EEAuthenticator.java:146)
        at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.forceLoggedInUser(SAPJ2EEAuthenticator.java:231)
        at com.sap.security.core.admin.ServletAccessToLogic.getActiveUser(ServletAccessToLogic.java:141)
        at com.sap.security.core.admin.UserAdminLogic.executeRequest(UserAdminLogic.java:438)
        at com.sap.security.core.admin.UserAdminServlet.doPost(UserAdminServlet.java:26)
        at com.sap.security.core.admin.UserAdminServlet.doGet(UserAdminServlet.java:19)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessio
nMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
I found the SAP Note 971249 but Iu2019m not sure it applies and even I can log on into Visual administrator.
Log for the Visual Administrator
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[/usr/sap/SID/DVEBMGS00/j2ee/admin/log/./traces/visual_administration.trc]/>
<!PATTERN[visual_administration.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!FILESET[0, 5, 10000000]/>
<!PREVIOUSFILE[visual_administration.4.trc]/>
<!NEXTFILE[visual_administration.1.trc]/>
<!LOGHEADER[END]/>
#1.5^H#C000AC11873E00000000000100CEC78D00045A541BE7A040#1225217198758#com.sap.engine.services.adminadapter.gui.tasks.LoginTas
k##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Server/VisualA
dministrationTool#Java###Error while trying to login to host: null
[EXCEPTION]
#1#java.lang.NullPointerException
        at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImpl.login(RemoteLoginContextHelperImpl.
java:72)
        at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImplp4_Skel.dispatch(RemoteLoginContextH
elperImplp4_Skel.java:64)
        at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
        at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
        at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessio
nMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Thank you very much for your help.
Best Regards

hi
we had the same issue some time back when we upgraded to SP15, we opened a OSS message and SAP had to come and fix the issue.
It was some inconsistencies in -Config DB settings and they made quite a few changes in security/configurations/ticket(config tool)
also
one Java parameter was wrong(config tool - server config) :
-Djava.security.policy=/java.policy it should be -
> Djava.security.policy=./java.policy (The DOT was missing)
thank you
Jonu Joy

OS X server (10.10.1) Imap Internal login failure

I have a problem with my main server on a OS X server 10.10.1 (Mac mini)
Clients cannot log in to the IMAP side of an account on the server.
So when using the mail client Connection Doctor the SMTP is successful and the IMAP portion not.
This happens with both accounts Local as with the accounts in the Open Directory service
The log of the Open Directory service indicates that ist was an successful login.
The IMAP log shows.
error Jan 17 18:44:04 imap-login: Info: Internal login failure (pid=93306 id=27) (internal failure, 1 successful auths): user=<test>, method=PLAIN, rip=10.0.0.101, lip=10.0.0.101, mpid=93310, TLS
The user test is local users.
The server was up-grade from Maverick to Yosemite a few months ago.
It runs 10.10.1 and Server 4.0.3
Any suggestion?
Thanks and regards,
Jacob

The reason that I wanted to use WGM was because it allows you to configure a maximum backup volume size per machine. If you just configure through TM, a single machine could fill the entire volume with backups.
I know that there's a way to use hdiutil to max the sparsebundle size that is created when you don't use WGM, but lets face it folks - if the option is there, then apple should support it!

Stuck at login screen without password box & only cancel button

I'm having trouble logging into one of my Desktops with Windows 7. I had simply locked my desktop and when I came backup, on waking up the monitor, I noticed that the screen shows the text "Press ctrl+alt+del to login" with the Windows 7 logo underneath
on a black background. This used to be the default blue wallpaper earlier. On pressing ctrl+alt+del as usual, I see no user account displayed and no text box to enter the password. Only the "Ease of Access", "Cancel" & Shutdown buttons are showing
on a black background. I can't enter the password anywhere. I restarted the machine to check if the problem disappears but to no avail. It still doesn't gives me the password box and a black background.
I've tried memory tests and startup tests from the boot menu and its still not fixed. Even safe mode gives me the same login screen without a place to enter my password. When I try to Remote Desktop to this machine from another machine, it gives me the same
3 buttons on the default wallpaper and no place to enter the password or select a user.
Any ideas on how to fix this. Any help will be really appreciated.

According to your description, please try the following methods for a test.
Method 1:
I would suggest you to run SFC scan to check for missing or corrupted system files.
Run System File Checker (SFC) scan to fix any corrupt system files. To do this, follow the steps mentioned in the link :
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
http://support.microsoft.com/kb/929833
Method 2:
I would suggest you to perform a system restore
You can refer the link:
http://windows.microsoft.com/en-US/windows7/products/features/system-restore
If there is not any working Restore Point, please compare the following 2 registry tree with a working computer.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Notify
Best regards,
Della Li

Workflow Agent login failure

Hi Everybody,
I m following KFI process for Invoice Processing.The document image is successfully loaded into UCM and display in IPM search criteria.But the thing is that when ever i m watching Documentrouting in EM ,there is no instance created .
IPM logs:Workflow Agent login failure
Please guide me how to solve this one.
With Regards
Jyoti

Hi Everybody,
Actually imaging.ear was missing.It has solved with the patch installation for soa suite 11.1.1.3 in linux machine.
Thnx for co-operation.
With Regards
Jyoti

How to get a stable DA output without feedback in PCI-7344

I have a motion controoler PCI-7344 to control a PZT stage without any kind of feedback. And PCI-7344 is expected to act as a DA output with trajectory generation and onboard programming. But I am confused about how to configurate this motion card.
Another thing I want to know is what is the normal noise level of the DA output. My card's noise is very large(roughly 70mV RMS). Is this noise is normal for the PCI-7344? Or this noise is caused by my incorrect configuration and use of PCI-7344. I have tried to use the analog feedback and none feedback to configurate motion card, and the noise are the same.

If you just want to output a trajectory profile without feedback a multifunction board like the PCI-6229 would be a better choice. Simply precalculate your trajectory profiles and send them to the outputs of the board.
Best regards,
Jochen Klier
National Instruments Germany

I keep getting "Login Failure Incorrect Sync Key". What do I do?

I have have username and password with Firefox. I have installed sync on home computer and have obtained sync key. I have installed Home on my iPhone. When I open Home, it provides code. I enter code in to Add A Device page on home computer. It says device successfully added. When I press Done on home computer, message on iPhone appears "Login Failure Incorrect Sync Key". I live in Sweden. What do I need to do to make this work? Thanks, Tosh

An upgrade of Firefox Home came through the itunes store and "lo and behold" it all works now albeit the interface is somewhat different to the desktop version. but at least all the bookmarks are there. Hope those who shared the same problem get it rectified.
Regards to you all.

Design a job for Login failure alert

HI,
I need a query to get Login failure alert for both windows login and SQL login account. Also i need track to which database the Login user is connecting while he is getting Login failure error. I need to to schedule this as a job.

To check what database was being used when the login failed, you will need to use default trace as mentioned in the link below:-
http://www.eraofdata.com/the-sql-server-default-trace/
or simply run the query below:-
SELECT TE.name AS [EventName] ,
v.subclass_name ,
T.DatabaseName ,
t.DatabaseID ,
t.NTDomainName ,
t.ApplicationName ,
t.LoginName ,
t.SPID ,
t.StartTime ,
t.SessionLoginName
FROM sys.fn_trace_gettable(CONVERT(VARCHAR(150), (
SELECT TOP 1
f.[value]
FROM sys.fn_trace_getinfo(NULL) f
WHERE f.property = 2)), DEFAULT) T
JOIN sys.trace_events TE
ON T.EventClass = TE.trace_event_id
JOIN sys.trace_subclass_values v
ON v.trace_event_id = TE.trace_event_id
AND v.subclass_value = t.EventSubClass
WHERE te.name IN ( 'Audit Login Failed' )
order by t.StartTime desc
The only other way would be to use Auditing, Server Side Trace or Triggers if you want to maintain history of these.
Reference:
http://sqlrows.blogspot.in/2011/10/note-to-self.html
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

Login failure without feedback

Similar Messages

Maybe you are looking for