Login issues in SAP B1 (Connection License Server failure)
After I launch SAP BO and trying login I get the error "Connection with License server failed [Message 60070-15]"
Please help ASAP
Before I begin, I must appologize for the term ASAP which I thought I edited but did not update. I actually found a solution on my own when I decided to uninstall and resinstall again from scratch. In the control Panen when I was begining the Process I thought of selecting repair on the Server Tools, then after that everything went back normal, I am not getting the issue any longer.
The description of the issue:
I was unable to login to SAP 8.8 due to error u201CConnection to the License server failed" and I tried to use License manger as a starting point of troubleshooting but when click on settings, I get u201C Failed to connect to License Server,u201D I click ok and was trying to import again the License key file but I could not because the button was always disabled and no Hardware key was displayed which was not right.
Thanks
Similar Messages
-
I cannot receive emails keep getting connection to server failure on my iPad
I cannot receive emails on my iPad. Keep getting pop up connection to server failure. What can I do?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Connection license server failed
I installed SBO for client, when I login, it required input " IP address or server name for the license server ". I input, but error: license error : 10000001 connection with license server failed.
Pls help me ... What I have to do now.Hi,
That version these installing?, if the version is 2005, you need to put the port of the license server:
server:30000
If you install the server in other port you need to use this port.
When you install the server, What server name you used?, if you use localhost, all the clients try to connect to a license server in localhost and ask you for the server.
Regards. -
Trying to login and getting message of connecting to server problems?
Having issues with Icloud logging in for the first time. Keeps telling me having issues connecting with server? Router is working fine and so is the net...
Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here. -
Lion Server - Connecting to Server Failure
I originally had an issue with Profile Manager displaying "Error connecting to server". I then ran App Cleaner to remove it, and now lion server is stuck in a loop displaying Connecting to server at the bottem. It also doesn't display any hardware connected. Any ideas on how to fix? I think I've tried everything possible except a fresh install.
i'm having the same troubles as you seiji-san, let me know if you get any solution for this pls...
-
Login Issues to SAP HANA from Design Studio
Hello All ,
I am pretty newbie here so the question might seem a bit elementary .We are trying to connect to our SAP HANA environment from Design studio .When we are pinging the XSEngine URL it is responding properly .But when we are trying to connect from Design Studio the following error occurs .
Here is the landscape we have designed so far :
HANA Server is installed .
BOXI 4.1 SP 5 server is installed .
HANA and BO servers are communicating through SSL .
Design Studio Add-on is installed on BO server .
When we tried to explore the path using HANA explorer we found the path mentioned in the error screen does not exist .
What we need to do to overcome this error ?
Regards,
Sourav RoyHi Sourav,
As mentioned by Karol, you have to deploy the DS-HANA Addon on your HANA System.
How to Document : Getting Started on SAP Design Studio 1.3 powered by BW on HANA – Part 2
Overview and Permissions : Design Studio 1.3 on HANA Platform
Thanks,
Poovin. -
How to fix connection to server failure?
I recently upgraded to ios 7 and since then I cannot access email on the iphone or i pad. I still getemail on my l
mac proSelect Error: SQLSTATE = 08S01
Microsoft OLE DB Provider for SQL Server
Connection failure,
please tel me how to fix fix this issues.
Hello,
Have you solved this issue after follow Murali's link above? If not, please elaborate your issue with more detail so that the community members will help you in a
efficient way.
Regards,
Elvis Long
TechNet Community Support -
System setting connection to server failure
When I try to get new plasma themes, windows decorations etc. through system settings I get an error:
Loading of providers from file: http://download.kde.org/ocs/providers.xml failed
I installed arch recently with kde-base package if it is important.
And I think my internet connection is working well.
Has anyone got any idea how to fix it? I'd be much grateful ;DI found this bug report, which seemed like it might be the problem. GetHotNewStuff started working after I visited that page. I didn't do anything, or change anything, but it started working. Computers are nuts sometimes.
edit: Also, I just changed my fstab and GRUB menu list from using device nodes to UUIDs... although that doesn't seem even a little bit related.
edit 2: And now it's back, after I changed nothing. Any ideas?
Last edited by Greyletter (2011-10-18 07:13:47) -
Trying to connect to a license server in a diffrent country
Our Client has just installed another SAP installation. They are trying to connect the hina SAP client to the Licence server in a diffrent country (the licese server has a Global licence )
the 2 countries are in diffrent time zones too.
so far we have not been successful!
typing in the ip address gives a error "Connection license server failed......."
I cannot find any documentation on this as well.
appreciate any helpHi Gordon,
Our situaiton is diffrent - we are trying to share a licence server - thats in a remote server. see clarificaiton below.
The situaiton is they want to SHARE the LICENCE SERVER ONLY.
simply,
Australian server has a unique SAP installation with its own database
China server has a unique SAP installation with its own database
somewhere in the middle ( the lincense server is runing on a common server - that server too is in Australia but what matters is its common and needs to be shared)
Australia needs to see its own databses ONLY
China needs to see its own databases ONLY
Both Australia and China needs to be authenticated using the same common licence server as above -
Client can not connect to Server installed window server 2008 and using 8.8
HI all!
I have a problem when Client log in to server that installed window server 2008.It can not connect to this server even when restart and key in IP or Server name,...
I try disable Firewall of window 2008 in server machine and client can connect to server. But when i disable firewall, it's mean i can not use Remote desktop or terminal service..
Now, how i can do in order to solve this problem.
Thanks!Hi,
Take a look at the admin guide (Page 75, 119, 159):
[http://service.sap.com/~sapidb/011000358700000150922010E.zip]
If you installed a firewall on the license service computer, make sure that the firewall is not set to port 30000; otherwise, the license service cannot work.
If you are using Port X, make sure that you open Port X and Port (X+1) in the firewall. For example, if you are using port 10000, make sure to also open port 10001.
The default communication port is 1143.
The default port of the SAP Business One license server is 30000 for license communication and 30001 for the license naming service -
SAP-Abap to oracle server or ms sql server
Hello;
I'm SAP to connect oracle server. And 3.party application database to prepare query and call procedure.
I'm know use to native sql. But Not connect SAP to oracle server. Please help me.
Thanks.Hi,
Step 1: Create an entry for the External database in DBCON table using Trxn: DBCA.
Table: DBCON (Description of Database Connections)
Field Name Description Value (For: E.g.:)
CON_NAME Logical name RAJ
DBMS Database system MSS
USER_NAME Database user <username>
PASSWORD Password <pwd>/<pwd>
CON_ENV Database-specific information
connection
MSSQL_SERVER=depotserver MSSQL_DBNAME=HOF_INDORE
DB_RECO Availability type for an open database connect
Step 2: Now you can write code to connect to the external database
Your Sample code can be something like this
EXEC SQL.
CONNECT TO 'RAJ' AS 'V'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'V'
ENDEXEC.
*- Get the data from MS-SQL Server
EXEC SQL.
open C1 for
select
loc_id,
loc_name,
loc_state
from ho_loc_mast
ENDEXEC.
Regards,
Raj -
OS keeps trying to connect to server
Hi - When I'm home I often connect to a local server on my LAN.
But when I travel, I get this system notification over and over:
There was a problem connection to the server "Media Center".
The server may not exist or it is unavailable at this time. Check the
server name or IP address, check your network connection, and then try again.
For some reason my system keeps trying to connect to the server. I can't see why. This message keeps happening even after rebooting, before I load any applications. I can't figure out where in my system that server request is stored and how to stop it.
I've scoured the console logs but can't find any references to my server's name.
Anybody know how I can stop this? The dialog box is annoying and takes focus away from whatever I'm working on.
Thanks in advance...
chicoOK, I found the problem. I'm posting in case anyone else needs help.
Back when Mountain came out it removed colors and distinctive icons from the sidebar, replacing them with grey generic icons. I, like many others, hated the new look, so I installed a program (Side Effects) that uses SIMBL to restore the colored sidebar. It worked, I was happy, and I forgot about it.
With Mountain Lion, apparently there is a more complex interaction, and SideBar/SIMBL somehow kept trying to mount a particular local server. It succeeded when I was home, but when I would disconnect, it would reconnect on relogin. When I travel, after reboot it keeps giving me a "Cannot Connect to Server" failure message (it stops after a while).
LSS, I uninstalled SIMBL and everything works as it should. I really miss the colored sidebar but at the moment I'm not motivated to wrestle with the hacks necessary to restore it. I wish Apple would do so but it ain't gonna happen. I'll have to learn to live with the ugly sidebar. -
Issues connecting to License Server after ServerTools upgrade 8.8
Hi
To run a preUpgrade Check I needed to upgrade the ServerTools from 2007 to 8.8.
Since this upgrade I can not connect to the License Server anymore.
Does somebody have an idea what could be wrong? I removed and reinstalled it twice and I do have a new license file.
The upgrader also shows me the COMMON grayed out and I con not run the Check either. I assume this is for the same reason.
Thanks
FranzHi Franz,
After upgrading the server tools with the Upgrade Wizard, the License Server is not started automatically. This issue is documented in a SAP Note [1488839|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1488839]. In order to resolve this issue please start License Manager after the upgrade.
The 2nd issue (The upgrader also shows me the COMMON grayed out) is described in SAP Note [1433019|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1433019].
In order to resolve this issue please upgrade your environment either to 8.8 PL10 or to 8.8 PL12.
hope it helps,
Regards,
Ladislav Meszaros
SAP Business One Forum Team -
Connection with license server failed sap after upgrade to 8.8
Hi
I had just upgraded to 2007b pl14 to 8.8 everything done good but when I login it giving me erroer "connection with license server failed"
I had restarted the licence server but still it same
And my licance server option is also disable ?
plz help me outHi,
check the below link, it will help you........
Re: Error in Server Tools Installation
Rgds,
Priya -
License server selection on every login
Hi Experts,
We have here a Windows Server 2008 R2 for SAP and every time we login in this server,it will require us to indicate the license server. We tried to re-install the client and turnoff all firewalls/anti virus/anti-malware but still we cannot solve this issue.
Any solution guys?
Thank you very much!
Regards,
Darius GragasinDear Darius,
which User do you use to connection to the Windows Server?
Could you check the Settings of the servicemanager, is he grey out?
Best regards,
Indira Siebmanns
Maybe you are looking for
-
Is there a quick way to open a resident video in fullscreen mode?
Short and not-so-simple, I have a client who requires the following: Starting from the home screen, he wants the shortest number of taps to open a video (resident on the device) in fullscreen mode. Ideally, I wanted to have a "shortcut" on his home s
-
I am trying to batch process my watermark from bridge. I have a saved action in photoshop cs5 and have used it for a while and all of the sudden it says "place" is unavailable. I have reset bridge and photshop and restarted the computer. Do action
-
How do I resolve error 1310 while installing crystal report version for visual studio 2010.
How do I resolve error 1310. I try to install crystal version for visual studio 2010, but I got this error message. Error 1310. Error writing to file. mcf80.dll.verify that you have access to that directory. My pc is window 7 (32 bit). Please I need
-
Refreshing data after pushView
Hi, I'm adding data to a database with a PopUp window. When I click the OK button to complete everything I want to return to a listbox that I can choose items from. The data is getting saved into the database but for some reason I can't get the lis
-
How to change the ring back tone?????
I can't figure out how to change the ringback tone........classical is not my genre.