Login loop and Blue Screen
The system booted to a blue screen yesterday. Booted to leopard install disk and ran DiskUtil. Everything was OK. Ran repair permissions, OK too. Found a possible fix from Apple- MAC 101 Lesson 2: Startup Setbacks. Moved the com.apple.loginwindow.plist and the com.apple.windowserver.plist from /Library/Preferences. Rebooted and the login window appeared instead of the blue screen. Type in my password, the system went to a blue screen and back to the login screen. Changed the password from the Install disk. Typed the original password and the login screen "shook". Typed the new password and the system went to a blue screen and back to the login screen. Any ideas, other than reinstall the OS? From the command line,
drwxr-xr-x@ 11 root wheel 374 Nov 6 20:29 /usr
drwxr-xr-x@ 11 501 admin 374 Nov 6 20:29 /Users/me
It seems that the system doesn't know that 501 and "me" are the same person. In UNIX the /etc/passwd file enter would need to be changed to poit "me" to 501. Does anyone know how to correct this?
If it happens again...
Son was using the computer and I believe that his time ran out. He called me and when I looked at the computer, there was a blue screen with the mouse. The only thing that I could do is reboot, so I turned off the computer using the power button, turned it back on, and still, nice blue background and the mouse. I could not log in as anyone else.
What I had to do is turn off the computer and pull the plug. When I booted up again, I see that his account has reached it's daily max. Now I have to turn off the parental controls unless I want to continue to play tech support, THE one thing the iMAC was supposed to address.
Similar Messages
-
I have seen this question before, but have found no definite answer, so I was wondering if anybody can help me.
My computer was running really slow, so I restarted it. At first I only got a bar sinister (circle with a line, as in a no smoking sign) after the apple logo, but after restarting in safe mode, I got the login screen. I was unable to log in to my admin account, but I can access my guest account. What happens when I enter my username and password for my admin is that it accepts the password, goes to the basic background for a minute, but then shows a blue screen and kicks me back to the login screen.
I'm currently running 10.5.8 on a 13" macbook. I already tried repairing permissions through disk utility with no luck. Unfortunately, I don't have my install discs because I've moved 3 times since getting the computer, and they've gotten lost in the shuffle, so if there's a way to fix things without them, that would be fantastic!Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one. -
My Iphone is in a loop and blue screen is the ending.
It crashed when I was checking my email and then was stuck in the initial apple homescreen and then into a rotating wheel and then blue screen. Then goes back to the apple reboot homescreen and so on.
I can't access to my iphone at all! I'm out of the country on business and no mobile phone due to this bug! Thank you very much, Apple, always exceeding my expectations!
Device: Iphone 5S 32G unlocked and bought through apple store in December 2013, 2.5 months old!
Any help would be much appreciated!
Thanks!This is what is happening:
http://www.youtube.com/watch?v=_qBidKe0dCo
Its looping with this sequence. -
I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues. -
Dmp file and blue screen error Windows 7
Hi,
Just wondering if someone can tell me how to read the dmp file created after the blue screen appears ?
I have just recently upgraded my Toshiba P300 from Vista 64 bit to Windows 7 Home Prem 64 bit.
I dont know why Windows 7 keeps crashing and so far I have no idea of how to open the .dmp
file (I have zipped the dmp file and attahced below).
http://cid-7a99d6152c55359c.skydrive.live.com/self.aspx/.Public/minidump/022710-26223-01.zip
The message that I been given so far says :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: a
BCP1: FFFFF6FC40052000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF80002E62322
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\022710-26223-01.dmp
C:\Users\Caroline\AppData\Local\Temp\WER-125393-0.sysdata.xmlI have try step 1 and didnt boot up the window normaly...same thing happened
Window 7 is loading...then boom the screen failed and blue screen appear...
there is the latet crash report
Version=1
EventType=BlueScreen
EventTime=129810543666556864
ReportType=4
Consent=1
ReportIdentifier=9fb6a978-99f3-11e1-9b67-fa9a72be4846
IntegratorReportIdentifier=050912-14508-01
Response.type=4
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.1
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=3084
UI[2]=C:\Windows\system32\wer.dll
UI[3]=Windows has recovered from an unexpected shutdown
UI[4]=Windows can check online for a solution to the problem.
UI[5]=&Check for solution
UI[6]=&Check later
UI[7]=Cancel
UI[8]=Windows has recovered from an unexpected shutdown
UI[9]=A problem caused Windows to stop working correctly. Windows will notify you if a solution is available.
UI[10]=Close
Sec[0].Key=BCCode
Sec[0].Value=a
Sec[1].Key=BCP1
Sec[1].Value=0000000000000000
Sec[2].Key=BCP2
Sec[2].Value=0000000000000002
Sec[3].Key=BCP3
Sec[3].Value=0000000000000001
Sec[4].Key=BCP4
Sec[4].Value=FFFFF8000308BB7E
Sec[5].Key=OS Version
Sec[5].Value=6_1_7601
Sec[6].Key=Service Pack
Sec[6].Value=1_0
Sec[7].Key=Product
Sec[7].Value=256_1
File[0].CabName=050912-14508-01.dmp
File[0].Path=050912-14508-01.dmp
File[0].Flags=589826
File[0].Type=2
File[0].Original.Path=C:\Windows\Minidump\050912-14508-01.dmp
File[1].CabName=sysdata.xml
File[1].Path=WER-27253-0.sysdata.xml
File[1].Flags=589826
File[1].Type=5
File[1].Original.Path=C:\Users\Moz\AppData\Local\Temp\WER-27253-0.sysdata.xml
File[2].CabName=Report.cab
File[2].Path=Report.cab
File[2].Flags=196608
File[2].Type=7
File[2].Original.Path=Report.cab
FriendlyEventName=Shut down unexpectedly
ConsentKey=BlueScreen
AppName=Windows
AppPath=C:\Windows\System32\WerFault.exe
ive also have got a AI SUITE II crash...
Version=1
EventType=APPCRASH
EventTime=129809041249476693
ReportType=2
Consent=1
UploadTime=129809041250516752
ReportIdentifier=ddea075d-9895-11e1-9a9f-eb38eba38a41
IntegratorReportIdentifier=ddea075c-9895-11e1-9a9f-eb38eba38a41
WOW64=1
Response.BucketId=2555721005
Response.BucketTable=1
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=AI Suite II.exe
Sig[1].Name=Application Version
Sig[1].Value=1.0.0.40
Sig[2].Name=Application Timestamp
Sig[2].Value=00000000
Sig[3].Name=Fault Module Name
Sig[3].Value=KERNELBASE.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=6.1.7601.17651
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=4e211319
Sig[6].Name=Exception Code
Sig[6].Value=0eedfade
Sig[7].Name=Exception Offset
Sig[7].Value=0000b9bc
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.1
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=3084
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=0a9e
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=0a9e372d3b4ad19135b953a78882e789
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=0a9e
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=0a9e372d3b4ad19135b953a78882e789
UI[2]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
UI[3]=AI Suite II has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\Windows\syswow64\kernel32.dll
LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll
LoadedModule[4]=C:\Windows\syswow64\WINTRUST.DLL
LoadedModule[5]=C:\Windows\syswow64\msvcrt.dll
LoadedModule[6]=C:\Windows\syswow64\CRYPT32.dll
LoadedModule[7]=C:\Windows\syswow64\MSASN1.dll
LoadedModule[8]=C:\Windows\syswow64\RPCRT4.dll
LoadedModule[9]=C:\Windows\syswow64\SspiCli.dll
LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll
LoadedModule[11]=C:\Windows\SysWOW64\sechost.dll
LoadedModule[12]=C:\Windows\syswow64\ADVAPI32.DLL
LoadedModule[13]=C:\Windows\system32\VERSION.DLL
LoadedModule[14]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_ec83dffa859149af\COMCTL32.DLL
LoadedModule[15]=C:\Windows\syswow64\GDI32.dll
LoadedModule[16]=C:\Windows\syswow64\USER32.dll
LoadedModule[17]=C:\Windows\syswow64\LPK.dll
LoadedModule[18]=C:\Windows\syswow64\USP10.dll
LoadedModule[19]=C:\Windows\system32\MSIMG32.DLL
LoadedModule[20]=C:\Windows\syswow64\SHELL32.DLL
LoadedModule[21]=C:\Windows\syswow64\SHLWAPI.dll
LoadedModule[22]=C:\Windows\syswow64\OLE32.DLL
LoadedModule[23]=C:\Windows\syswow64\OLEAUT32.DLL
LoadedModule[24]=C:\Windows\system32\IMM32.DLL
LoadedModule[25]=C:\Windows\syswow64\MSCTF.dll
LoadedModule[26]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[27]=C:\Windows\system32\rsaenh.dll
LoadedModule[28]=C:\Windows\syswow64\imagehlp.dll
LoadedModule[29]=C:\Windows\system32\ncrypt.dll
LoadedModule[30]=C:\Windows\system32\bcrypt.dll
LoadedModule[31]=C:\Windows\SysWOW64\bcryptprimitives.dll
LoadedModule[32]=C:\Program Files (x86)\ASUS\AI Suite II\AsMultiLang.dll
LoadedModule[33]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[34]=C:\Program Files (x86)\ASUS\AI Suite II\ImageHelper.dll
LoadedModule[35]=C:\Windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.17514_none_72d18a4386696c80\gdiplus.dll
LoadedModule[36]=C:\Windows\system32\USERENV.dll
LoadedModule[37]=C:\Windows\system32\profapi.dll
LoadedModule[38]=C:\Windows\system32\GPAPI.dll
LoadedModule[39]=C:\Windows\system32\cryptnet.dll
LoadedModule[40]=C:\Windows\syswow64\WLDAP32.dll
LoadedModule[41]=C:\Windows\system32\SensApi.dll
LoadedModule[42]=C:\Windows\system32\Cabinet.dll
LoadedModule[43]=C:\Windows\system32\DEVRTL.dll
LoadedModule[44]=C:\Windows\system32\WindowsCodecs.dll
LoadedModule[45]=C:\Windows\system32\WINHTTP.dll
LoadedModule[46]=C:\Windows\system32\webio.dll
LoadedModule[47]=C:\Windows\syswow64\WS2_32.dll
LoadedModule[48]=C:\Windows\syswow64\NSI.dll
LoadedModule[49]=C:\Windows\system32\credssp.dll
LoadedModule[50]=C:\Windows\syswow64\mswsock.dll
LoadedModule[51]=\\.\globalroot\systemroot\syswow64\mswsock.dll
LoadedModule[52]=C:\Windows\syswow64\WININET.dll
LoadedModule[53]=C:\Windows\syswow64\Normaliz.dll
LoadedModule[54]=C:\Windows\syswow64\iertutil.dll
LoadedModule[55]=C:\Windows\syswow64\urlmon.dll
LoadedModule[56]=C:\Windows\system32\Secur32.dll
LoadedModule[57]=C:\Windows\System32\wshtcpip.dll
LoadedModule[58]=C:\Windows\System32\wship6.dll
LoadedModule[59]=C:\Windows\system32\IPHLPAPI.DLL
LoadedModule[60]=C:\Windows\system32\WINNSI.DLL
LoadedModule[61]=C:\Windows\system32\dhcpcsvc6.DLL
LoadedModule[62]=C:\Windows\system32\dhcpcsvc.DLL
LoadedModule[63]=C:\Windows\syswow64\CFGMGR32.dll
LoadedModule[64]=C:\Windows\system32\uxtheme.dll
LoadedModule[65]=C:\Windows\system32\DNSAPI.dll
LoadedModule[66]=C:\Program Files (x86)\Bonjour\mdnsNSP.dll
LoadedModule[67]=C:\Windows\system32\rasadhlp.dll
LoadedModule[68]=C:\Windows\System32\fwpuclnt.dll
LoadedModule[69]=C:\Program Files (x86)\ASUS\AI Suite II\AssistFunc.dll
LoadedModule[70]=C:\Windows\system32\PROPSYS.dll
LoadedModule[71]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\comctl32.dll
LoadedModule[72]=C:\Windows\system32\apphelp.dll
LoadedModule[73]=C:\Windows\syswow64\CLBCatQ.DLL
LoadedModule[74]=C:\Windows\system32\wpdshext.dll
LoadedModule[75]=C:\Windows\system32\WINMM.dll
LoadedModule[76]=C:\Windows\System32\shdocvw.dll
LoadedModule[77]=C:\Windows\SysWOW64\ieframe.dll
LoadedModule[78]=C:\Windows\syswow64\PSAPI.DLL
LoadedModule[79]=C:\Windows\SysWOW64\OLEACC.dll
LoadedModule[80]=C:\Windows\syswow64\SETUPAPI.dll
LoadedModule[81]=C:\Windows\syswow64\DEVOBJ.dll
LoadedModule[82]=C:\Windows\system32\ntmarta.dll
LoadedModule[83]=C:\Program Files (x86)\ASUS\AI Suite II\pngio.dll
LoadedModule[84]=C:\Program Files (x86)\ASUS\AI Suite II\AsAcpi.dll
LoadedModule[85]=C:\Program Files (x86)\ASUS\AI Suite II\asacpiEx.dll
LoadedModule[86]=C:\Windows\system32\RpcRtRemote.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=-1739246291/nBucketTable=1/nResponse=1/n
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=AI Suite II
AppPath=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe -
IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?
If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you. -
Can Motion 5 replace a green screen and blue screen in the same shot?
Can Motion 5 replace a green screen and blue screen in the same shot? I would like to replace a green screen with one image, and a blue screen with another.
Fox gives a good example for keying green & blue (or any other color) from the same shot. I'd suggest doing a few things to get better accuracy.
First, the motion keyer always removes the color it detects the most of by default (blue/green). You can override this by setting the Strength parameter to zero, then use the Color sample tool to select the color you want. The advantage is motion will do a good job of targeting only the hue (color) that you want to remove and set an appropriate starting softness. It also will remove spill based on this color. Looking at Fox's example movie and the shot, I'd approach the same shot this way:
Remove the Blue
1. Apply the keyer and set the strength to zero.
2. Use the Sample Color tool and select the blue (or other color) to be removed.
3. Decrease the spill level (if needed). In Fox's example the spill from the blue glasses is going to be minimal, especially compared to the green screen, your shot may need different adjustments. Only de-spilling what you need to will give you more accurate color right away and minimize additional color correction that might be needed later.
4. Use the Color selection tools (Chroma wheel/Luma bar) to fine tune. Ideally you want a minimal tolerance, the inner selection, with a nice fall off, the outer selection. Try with the Scrub boxes setting first, then switch to manual if you need more control. Again see Fox's example.
Remove Green
It's the same as the blue, you could apply the keyed to the same clip or a parent group, at this point it's many user preference.
With these techniques you can remove any color from a shot or create a mask based on a color. BTW, as you are learning to use the keyer I'd highly recommend having the Color Selection open so you can see the graphs. These give you real time feedback as you make selections and changes with the Strength, Refine and Color selection tools. Watch what happens as you make selection or changes, sometimes the problem area is actually in the brightness not the color, or the softness may change more than the tolerance selection. Observing what is happening in these graphs will help you figure out wha to change and speed things up. -
Cropping and Blue Screening - 2 unrelated questions.
1) When I straighten a still in Canvas by using the wire frame, to make a house level, say, the cropping lines, naturally, move with it. So a cropping line at an angle will give me a slanting top and bottom line. So how can I crop it so that the picture has a square aspect? Is the only recourse to go back to the original site for the picture, GIMP or iPhoto, perhaps, crop it there and re-import the photo into FCE? Or is there a quicker way?
2) I have added a number of videos above my main video to show, for example, falling snow, and eliminated their black background by Modify - Composite Mode - Screen. Very easy and by no means unusual. So, my question, is, why all the fuss about green and blue screening? Setting it up seems troublesome. A black background for the purpose is much easier to make, and, for that matter, easier to find. I looked down my back yard this morning and this side of the creek are jet black bushes which would seem ideal for such a purpose. This seems such a no-brainer that I think I must be missing something. But it is curious.
Allosaurus1) I shall immediately turn to the garbage matte section in your book - I'm sure I remember seeing one - and work it out from there. And here I always thought a garbage matte was that rug I bought in Cairo.
2) A black screen. That does give me a thought. When I return to my upcoming masterpiece, " "Orrible Murder at the Castle Doom" I could put one of my granddaughters in a black suit, photograph her against a black background and Voila! a floating head. I wonder if they give out Oscars for original ideas?
Once more. Thank you.
Allosaurus -
Blank Black Screen And Blue Screen. Do I Need To Do Reflow To Ati Chipset?
Hello i want to tell you my problems and what i did until now.
I have hp pavilion dv3 4150st. I was using win7 64 bit . and i was geting an error that says "display driver amd driver stopped responding and has successfully recovered".I started to get this eror often . And a few days later my pc startet to get blue screen errcor after a few second later than display driver error. . And after 2-3 blue screen error i lost my screen. It was blank black . when i restart pc the screen was blank black. there was no image. When i started to fix another monitor, i saw screen . And i installed the win 7 with another external monitor. Bu i had still black screen after install the windows.. Itand was still black after i remove the ectgernal monitor. I installed bios again but i had still black screen. And i tried the install ati display driver after installing windows . But after i installed the display driver, i had the blue screen error again. And now i have still both blank black screen and blue screen problem.
I cleaned the motherboard. I resetted bios. I installed bios. i installed windows again. i installed ati display driver.But these couldnt solve the problems. Please can you tell me what can i do now ?Hi beginner_2012,
Thank you for your post, I will do my best to assist you.
I grasp that you were getting the error "display driver amd driver stopped responding and has successfully recovered" quite often. Then a few days later you got the blue screen then the above error message, after 2 -3 more errors the screen is now blank or black. Here is a document to assist you with this. Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
My ipnone 5s keeps crashing and blue screening any advice
My ipnone 5s keeps crashing and blue screening any advice
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (sorry, I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
Thanks for any help!You have to take the computer to the Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best. -
X-Fi Titanium and Blu-Screen (Win XP)
%[ Hi ti all, i am a new user and, of course, i have my first big problem with creative drivers/software.
Before installation of audio card all worked greatly but after i get a blu screen at shut down or at reboot (is the same).
I used the latest version of the drivers available on the web (2.7.0006).
I removed audio card and drivers and all works greatly, too.
I reinstalled audio card + drivers and blu screen at shut down/reboot appears again.
Anyone knows the solution.
Audio card works correctly but with this blue screen ?the creative console don't save any settings, so every time
i turn on the pc i have to configure it (effect, mixer, number of speakers, mic amplifiers, etc. etc.).
Please help me.
This is my configuration:
Cpu Intel Core i7 920
M/b Asus P6T (bios 0603)
Ram 6 Gb DDR3 (3x2Gb DDR3 Corsair) ('cause i have Vista64 on another partition)
ATI Radeon HD4890 Gb?
HD Seagate 500 Gb
Thanks in advance.Anyone?Message Edited by Rayman968 on 08-0-2009 2:47 PM
-
Gateway FX and Blue Screen of Death
Computer:
Gateway FX 7024
GeForce 8800GT 512 mb
Problem:
I've had the computer for 1 1/2 years with very few problems. Recently, the screen will lock up solid and be illegible with "static" lines all the way down the monitor. Sometimes before the screen locks up, it will flip to the blue screen of death, say it's dumping physical memory, and then lock up. Only thing I can do is restart, but it will do it again at random lengths of time. Happens more while I'm playing games than anything else. Sounds to me like the graphics card has gone Tango Uniform, but a computer guru, I am not. Any ideas?
What I've done so far:
I have checked for updated drivers and installed them.... no fix. I rolled back the drivers.... no fix. I have visually checked fans on power supply and graphics card to make sure they are working and they are fine. The fan on the motherboard spins, but doesn't appear to be moving overly fast. I checked BIOS and everything looks around what it should be for temp settings. In the "problems and solutions" application, it shows a video hardware error.
The only thing i did notice was there is only a 400W power supply installed and from the posts I've read, the 8800GT graphics card should have a 700-900W power supply. However... I've never had problems with it before. Could this cause the problem after 1 1/2 years?
help... i'm shaking from game withdrawalsVisited a company IT department today and an engineer looked at the AT&T Net Client settings. It now works - this may have been the "fix" for those in a similar predicament (all in the AT&T Net Client):
1. Click "Settings".
2. Click "Show the login properties window".
3. Click "Configure".
4. Click "Next".
5. Select the "Both the internet and my company's intranet" radio button.
6. Select "Managed VPN - SSL DualAccess" from the dropdown.
7. Click "Finish".
Cheers,
- Pete -
FlashPlayer 10.2.152.26 and Blue Screen (ati2dvag error)
Hi. I know for sure that I’m not the only one to have this kind of problem.
My configuration (single user):
PC Acer Travelmate 6592G.
OS: Windows XP Pro SP3 updated with the latest patches.
ATI Mobility Radeon HD 2400 XT HyperMemory (with last version of VGA Driver).
Browser: Firefox (3.6.13 version).
Antivirus: ESET NOD32 4.0.468.1 and Malwarebytes on demand.
No malwares or virus.
My problem.
I used 10.1.102.64 version of FlashPlayer and everything worked fine.
I updated to 10.2.152.26 by ‘update flashplayer window’ … and now when I try to see any Youtube video,
my PC crashes.
Here is what happens. After 15 sec it reboots automatically with a little instant of blue screen (that I can’t read). When ready, I try again to see a Youtube video and this time it still crashes, but it stops on the blue screen (that now I can read); the blue screen shows a “ati2dvag” error (infinite loop), advices me to check/update my VGA driver, and signals a “STOP: 0X000000EA (0X85721AE0, 0X89A05120, 0XBA51BCBC, 0X00000001)”.
Now I have to turn-off hardly.
What I did.
I checked my VGA driver, and it was OK (latest version).
So I tried to uninstall (uninstalling file + reboot + control at http://www.adobe.com/it/software/flash/about/) and to re-install the 10.2 version (running the installing file). But nothing changed.
Also when I tried to link to http://www.adobe.com/it/software/flash/about/ I couldn’t see the spinning flashplayer logo (and I couldn’t try to disable hardware acceleration) because the PC crashed.
I tried to disable Hardware acceleration using the “windows Screen control panel” (hardware acceleration from ‘max’ to ‘min’), but nothing changed.
Now I came back to 10.1.102.64 version and everything works fine. But I’d like to have always my software updated.
I’m not an expert, so I can’t guess any other operation … but waiting for the new flashPlayer version (10.3 ?).
I do think that there is some little bug in this 10.2 version.
I hope to help all people having as the same problem as I.
Thanks in advance.Maurizio,
I thought that I'd respond to your inquiry here instead via the e-mail. I apologize for the delay in getting back to you as I've been extremely busy. Anyway, admittedly, I am not tech-savy. As a retired police officer and current sales representative, I just do not have the technical background to explain exactly what I did and how managed to repair the BSOD. I stumbled across a post on my Google search where someone had suggested to go to Dell's website, enter your "service tag," which is essentially a build order, and from that, Dell's site was able to tell me which updates were applicable to my system and to be honest with you, I installed all of them and my computer is working flawlessly.
I am not sure whether or not your manufacturer has a similar support site, but if it doesn't, I would like to think that you print out your system profile and then go to the appropriate manufacturers' sites and obtain the most current drivers from them. For what it's worth, here are the downloads that I installed:
Intel G31/G33/Q33/Q35 Graphics Controller
Intel Matrix Storage Manager
Intel 825xx 10/100 Platform LAN Connect Device
Intel Chipset Software Installation Utility
OPTIARC AD-7200S HH SATA Trayload DVD+/-RW
Realtek ALC888 HD Audio
I did not list the Dell specific driver downloads as they wouldn't apply. I also realize that some of the driver updates that I listed most likely had nothing to do with the resolution of my BSOD problem but I can say that by installing the latest drivers available for my system, I no longer receive the BSOD message. My hope is that by posting this reply is that someone with the knowledge and expertise in this area can expand on my post by suggesting solutions to how you and others can identify the likely culprit and fix your machines.
Good luck!
Paul -
Belkin Flip KVM Switch and Blue Screen
G5 Dual 2ghz, clean install of Leopard.
I have a dual head video card, attached to the DVI port is a 22" monitor connected via DVI, on the ADC port I have ADC to VGA adaptor which a Belkin "Flip" KVM switch is attached, leading to a 17" monitor.
On booting I get to the point when the Finder should be loading and get a blue screen on both monitors, the monitors both periodically do a fade from black as though the system has just tried to change video resolution. However this loop continues.
If I remove the KVM and have the 17" plugged in, boot up is fine. This set up worked fine with 10.4x.
Any suggestions.
ThanksZork, have you cracked this problem yet?
I have a similar item - Belkin's Switch2 for Mac mini - and I get the same halting at the blue screen. Belkin UK's 2nd line support failed to replicate this error and replaced my device with the one that they used. It failed as well on my system (which works fine without the Switch2!).
In case it helps, a dig in the logs showed the following fault repeating itself presumably while the screen stayed blue:
(starts 6 lines down, I think)
01/05/2009 10:12:25 com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxDrv.kext loaded successfully
01/05/2009 10:12:25 com.apple.SystemStarter[29] Loading VBoxUSB.kext
01/05/2009 10:12:25 com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxUSB.kext loaded successfully
01/05/2009 10:12:25 com.apple.SystemStarter[29] Loading VBoxNetFlt.kext
01/05/2009 10:12:25 kernel vboxdrv: fAsync=0 offMin=0x1230 offMax=0x39450
01/05/2009 10:12:25 kernel VBoxDrv: version 2.1.4 r42893; IOCtl version 0xa0009; IDC version 0x10000; dev major=18
01/05/2009 10:12:25 ReportCrash[110] Formulating crash report for process WindowServer[68]
01/05/2009 10:12:25 com.apple.SystemStarter[29] kextload: /Library/Extensions/VBoxNetFlt.kext loaded successfully
01/05/2009 10:12:26 com.apple.launchd[1] (com.apple.WindowServer[68]) Exited abnormally: Floating point exception
01/05/2009 10:12:26 kernel VBoxFltDrv: version 2.1.4 r42893
01/05/2009 10:12:27 kernel AirPort: Link Up on en1
01/05/2009 10:12:28 ReportCrash[110] Formulating crash report for process WindowServer[116]
01/05/2009 10:12:28 com.apple.launchd[1] (com.apple.WindowServer[116]) Exited abnormally: Floating point exception
01/05/2009 10:12:28 com.apple.launchd[1] (com.apple.WindowServer) Throttling respawn: Will start in 9 seconds
01/05/2009 10:12:30 ReportCrash[110] Saved crashreport to /Library/Logs/CrashReporter/WindowServer2009-05-01-101214GottaLight-2.crash using uid: 0 gid: 0, euid: 0 egid: 0
01/05/2009 10:12:30 ReportCrash[110] Saved crashreport to /Library/Logs/CrashReporter/WindowServer2009-05-01-101227GottaLight-2.crash using uid: 0 gid: 0, euid: 0 egid: 0
01/05/2009 10:12:38 ReportCrash[121] Formulating crash report for process WindowServer[120]
...and repeats it every 9-10 seconds.
Do/did you get this as well?
Can anybody comment on what is going on, please?
Maybe you are looking for
-
Cancelled Order - Still Processed
I cancelled my BT Broadband package on Friday 9th August over the phone, the advisor informed me he had closed the account but failed to give me his name or a reference number. I waited throughout the weekend for an email or a letter to be sent confi
-
HT5312 Forgot my security question answers?
Set up an itunes account a hundred years ago, and just today bought an iphone. Wants my security answers to let me buy apps, but I can't get the answers right and it has locked me out. I thought there would be some sort of verification email, but t
-
TS3354 I need to reload my movie in SD instead of HD. How can I do that?
How do I reload my movie in HD to SD?
-
Half the time, Locator.getCompositeInstances() fails due to EJB permissions
Within an embedded Java statement in a BPEL process, I am trying to get a handle on all composites that have the same ECID as the current composite. I think I have got the code I need, but I am running into the strangest problem: with every test inst
-
I Photo Libraries on ext HD won't upgrade, permissions 'cannot be repaired'
I've copied several I Photo Libraries to external HD over the years. Upgraded to Lion, now some libraries won't upgrade and permissions 'cannot be repaired' how do I access these photos/videos?