Login not as administrator

Why i can view many llb's in functions pallete if i login to PC not as administrator.

beacause you have installed the pallete in the acount that is not administrator.
Be sure that you install all your software and any others things in administrator acount.
Benoit Séguin
Software Designer

Similar Messages

Administrator login not available at bootup anymore?

Before HD crash I had an auto screen come up where I had to login as the administrator.
After new installation of Leopard 10.5.1 the admin Login screen has gone and it goes straight into my desktop.
I want to have the forced Login back to help security but I can't find how to do it.
Can anyone help please?

Turn automatic login off from the Accounts or Security panes of System Preferences.
(60690)

Email security Q: Connection to server succeeded; login not required

Hi everyone
I ran the Mail Connection Doctor on my mac at home this morning as I was having trouble sending an email. One of my email accounts (SMTP) has come back with:
"Connection to server succeeded; login not required. "
I am just wondering what that means security wise? As it is my work email I am a bit worried that perhaps the IT people didn't set it up right? They've been having a lot of trouble with someone spoofing the boss's email too.
Does that mean that anyone who knows this email servers details can just use it?
All my other email accounts come back with "Connection and login to server succeeded".

Dear Samir,
In order to try to resolve the issue, please do the following steps :-
1. Go to Add/Remove Program --> Uninstall SAP Business One Client.
2. Go to C:\Program Files\SAP, then take a backup of the SAP Business One Folder and
    then delete the SAP Business One folder.
3. Go to Start --> Run --> %UserProfile%\AppData\Local\SAP\
    Then delete the SAP Business One Folder.
4. Now reinstall the SAP Business One Client application from the B1_SHR.
Now you can login and enter all the details information and then log out from SAP Business One
application. You can open the application again and check this issue.
Note : Please make sure that the Windows user has read and write access to the above two folders
          as per step (2) and (3).
Regards,
Rakesh Pati
SAP Business One Forum Team.

Failed to load webapp and Could not discover administration URL for server

Not able to deploy application on SOA server.
Hi All,
I am not able to deploy my application to the SOA server as i am getting the below error..I am not using bam server at all and still it is saying "Could not discover administration URL for server 'bam_server1'." plz help.
[07:53:58 PM] [Deployer:149191]Operation 'deploy' on application 'ProjectCreationApplication' is initializing on 'soa_server1'
[07:53:58 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[07:53:59 PM] [Deployer:149193]Operation 'deploy' on application 'ProjectCreationApplication' has failed on 'soa_server1'
[07:53:59 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: Failed to load webapp: '/workflow/ProjectCreation_UI'.
[07:54:01 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
[07:54:01 PM] Caused by: java.lang.ClassNotFoundException: oracle.bpel.services.workflow.client.worklist.servlet.IntegrateTaskFlowWithTask
[07:54:01 PM] See server logs or server console for more details.
[07:54:01 PM] weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
[07:54:03 PM] Taskflow deployment failed to deploy to server. Remote deployment failed
[07:54:03 PM] #### Deployment incomplete. ####
[07:54:03 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

Hi Vipin,
Might be the way you're deploying your ADF UI project.
Are you right clicking the name of your ADF UI project in the Application Navigator tab and then clicking "Deploy"? While this works great for your BPM composite project, you'll get errors like this when deploying the ADF project in the same manner.
Dan

I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update." I have it set as adminstrator as the user.

I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update." I have it set as adminstrator as the user. I am running Windows 7 Ultimate. Help please?

Thanks, but I've done that several times & it still says I need administraive privileges. I had itunes installed with no problems until I did the latest update. After that it just disappeared, so I tried reinstalling. Now I can't sync my phone. This is so frustrating!

Problem when login to Visual Administrator

Hi all,
Here is a problem while login into visual administrator.when i run go.bat file it is throwing a syntax error.
So,can anyone suggest me how to resolve.
As i need to active the services to run AE for Netweaver PI.
Thanks,
Kalyan.

Hi,
Try logging on the ABAP stack withthe J2EE_ADMIN and changing the password there.
Or you can update the password in the secure store area (admin/password<SID>)of the configtool.bat.
Try this very simple procedure and also try to check the below things also but try the first option.
Please follow steps one by one. it should resolve your issue.
Reasons for this issue; plz check it one by one.
1. Did you configure with ABAP? if yes, plz do below steps:
Plz assign SAP_J2EE_ADMIN role to J2EE_ADMIN user.
2. VA login dialog; Please check Port(5xx04) is right?
3. Admin password is wrong or lockecd.
If yes, Activate SAP* then reset or unlock it. For this jus follow below steps:
If you forgot or lock "Administrator or J2EE_ADMIN" password just follow below steps:
STEP-1: Enable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = TRUE"
4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
5.Save.
6.Restart the engine.
STEP-2: Login with "SAP*" into portal
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / password as" SAP* / <password ex: abc123>"
3. Search for "Administrator" user
4. Reset or change password for "Administrtor"
STEP-3: Disable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = FALSE"
4.Save.
5. Restart the engine.
STEP-4: Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please reward points if it helps
Thanks
Vikranth

Could not read administrative data for payroll result

Hi Experts,
I am trying to extract data from ECC6.0 for datasource 0HR_PP_REC_51 and getting error:
"Personnel No. 00100062 : Could not read administrative data for payroll result HR_BIW_PP"
Can any body tell me the relevant solution for that.
Thanks in advance!
Sapna

Hi Sapna,
Please can you tell me how to fix this error, I have the same problem now.
Thanks in advance.

Failover cluster node - You do not have administrative privileges on the server 'servername' ?

Hi Hello & Good morning Technet's,
I would like to post a question which i really expecting a solution.
I got 2 domain in one single forest.
Domain 1: hg.corp
Domain 2: iac.corp (iac.corp
is a tree domain under hg.corp forest)
Trust : Transitive
trust between hg.corp and iac.corp
Domain controller 1: dc.hg.corp
(for hg.corp)
Domain controller 2: iacdc.iac.corp
(for iac.corp)
I want to make a Fail-over cluster between this 2 domain controllers ( But both are in different domain literally, but in same forest )
Process Validate cluster in dc.hg.corp
dc.hg.corp can added, but iacdc.iac.corp failed (Error: You do not have administrative privilages on the
server 'iacdc')
Process Validate cluster in iacdc.iac.corp
iacdc.iac.corp can added, but dc.hg.corp failed (Error: You do not have administrative privilages on the
server 'dc.hg.corp')
Technet please provide me a solution for this issue, So i can reduce server box counts.
Thank you & Have a nice day.
Shamil Mohamed

Hi,
We do not support combining the AD DS role and the failover cluster feature in Windows Server 2012.
This behavior is by design.
The related KB:
You cannot add a domain controller as a node in a Windows Server 2012 failover cluster environment
http://support.microsoft.com/kb/2795523
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Trying to restore my macbook, and im not the administrator what best way to do.?

im not the administrator of this macbook how can i restore to a factory settings.?

To the best of my knowledge Administartor Privilages are needed to Perform what you ask...

EAS - Error: "Could not connect Administration Server

hello All,
i am very new to EPM
i have installed EPM 11.1.2.2 with web application deployed to single manage server
OS : windows server 2008
database : sql server
when i try to connect EAS console it gives me error
Could not connect Administration Server
any idea?

If it has been deployed to a single managed server on the default port then you will need to add the server in EAS console as servername:9000
Cheers
John
http://john-goodwin.blogspot.com/

ERROR: NO_GUEST: Guest login not allowed from client startup

we are getting the following error with express 6.3.4 when connectting to the express server from Objects using a connection editor.
The error message is
Error #12150 in XPCUBE: Non-fatal (0300): Data Manager is unable to generate transmission.
Error #10300 in XDMRESP: Non-fatal (0300): ERROR: NO_GUEST: Guest login not allowed from client startup
Encountered similar error while calling from OLAP web application.
In stored procedure XWD_RAMSTARTUP: The following Express
Server error occurred: NO_GUEST: Guest login not allowed from
client startup
Which I believe is the same reason.
Can you pls suggest what could be the problem and how can we over come this.

In the Connection Editor, under "Relational Data-> Settings" did you check the "Personal Configuration" box?
If you did, you should ensure the Authentication type is not set to "None".

Syc not working"login not found" after Format

i had Nigthly installed (last version) all synced i was forced to format my old partition then i re-installed nigthly and tryed to sync and it says login not found, but i can log in here ( https://account.services.mozilla.com/) then i tryed to create account on the "new sync" and tryed to sync and didnt sync my old stuff.
can anyone tell-me the way ? or someone superior can restore them ?
i had tons of stuff important there :(
Thanks in advance

Hi vegetagaru,
I do not know if this will work, because I have not tried it, but you may need to install the old sync to recover the data from the old account. If you have your recovery key handy [[Install an older version of Firefox]] and login to the account.
If that is successful you can try the new sync [[How to update to the new Firefox Sync]]

Says I am not an administrator when I am the only account on the computer.

I am unable to download anything on my computer because it says I do not have administrator rights, but I am the only account on the computer and am labed as the admin. What is wrong and how do I fix it?

What exactly did you do that caused an error, and what exactly was the error message? E.g., did you try to drag an item from a folder to the Applications folder in the Finder? What was the source folder and what was the item?

Start systemd --user once after first login, not per session?

Hey guys,
So I've been toying around with using systemd to manage user daemons and some oneshot processes, it seems like it could be really nice
Here's what I'm thinking I would like to do:
I would have two user targets, `console.target` and `graphical.target`.
The console target will start things like pulseaudio, ssh-agent (envoy), transmission, stuff like that.
The graphical target will start xorg and then other things like the WM, set the wallpaper.. you get the idea. Obviously the graphical target will want the console target.
Now, the part I wanted to get some feedback on is this: I would like a systemd --user instance to only be started once after my first login, not once per session.
So for example, I login from vt1 and it brings systemd --user up to the graphical.target. Then if I later SSH in from somewhere, it won't start a new systemd --user session (Ie, won't start pulse-audio, transmission-daemon, etc).
However, if I haven't logged into my machine yet and I SSH in, it will start up systemd --user and will start the console.target. If I then later login via vt1 it will see that there's already a systemd --user session started and start the graphical.target
Does this make sense? Is it a bad idea?

You could make a column in the database, and when the
information is set (emailed) make the value to be 0, then when they
first register use a IF recodset("column_name") = 0 Then
reponse.redirect("filloutpage.asp") end if, then when they fill out
the info have a hidden form field thats updates the value to 1. on
the login page after the first if make another IF
recordset("column_name") = 1 Then response.redirect("index.asp")
end if.
i have forms that have three different redirect based on user
input, and you could do the same thing you could add the one for
the first time to dw made code, here is an example, you could
change the request.form to a recordset value and it will work.
If Request.Form("select") = "Self" Then
MM_editRedirectUrl = "FridaySchedule.asp"
Response.Redirect(MM_editRedirectUrl)
End IF
If Session("MM_AdminEdit") = "True" Then
MM_editRedirectUrl = "FridayScheduleAdmin.asp"
Response.Redirect(MM_editRedirectUrl)
End IF
MM_editRedirectUrl = "FridayScheduleDept.asp"
If (Request.QueryString <> "") Then
If (InStr(1, MM_editRedirectUrl, "?", vbTextCompare) = 0)
Then
MM_editRedirectUrl = MM_editRedirectUrl & "?" &
Request.QueryString
Else
MM_editRedirectUrl = MM_editRedirectUrl & "&" &
Request.QueryString
End If
End If
Response.Redirect(MM_editRedirectUrl)

HT4216 Its telling me I am not the admin "Current user is not an administrator." when I am. How do I change this?

"current user is not an administrator." This is incorrect. How do I make the change?

Are you asking about being an admin user on a Windows system? Have you checked in the Control Panel for Users to see that you actually do have admin priviliges? Have you tried logging out and logging in to a dedicated admin account?

Login not as administrator

Similar Messages

Maybe you are looking for