Login not working after password reset.

we migrated our ebs system from linux to AIX last week.
previous: 11.5.10.2, 10.2.0.2, linux5.5
present: 11.5.10.2, 10.2.0.2, AIX 6.1
Users are not able to login after they reset their password.
As workaround, we asked them to try the direct forms url: https://host.domain/dev60cgi/if60cgi.exe and they are able to login.
Can anyone help me on this?
Thanks.

Users are not able to login after they reset their password.What is the error they get?
Can you reproduce the issue when you reset the password from the backend (using FND_USER_PKG) or using FNDCPASS?
As workaround, we asked them to try the direct forms url: https://host.domain/dev60cgi/if60cgi.exe and they are able to login.
Can anyone help me on this?Please check Apache log files for details about the error.
Also, please confirm that AutoConfig completes successfully with no errors.
Thanks,
Hussein

Similar Messages

  • Restore not working after a reset?

    Due to problems with some apps I had to reset the iPhone three times now.
    After the restore of the iPhone software iTunes asked me if I want to restore the last saved backup. I agreed. But after some scanning the restore failed saying that is is the wrong version.
    Anyone an idea? And what is the purpose anyway when restore is not working after reinstalling the iPhone software.
    By the way: I have the latest versions of iTunes and the iPhone software.

    Izit software or hardware? Confuse:(
    Only can use wifi now.
    Any way thanks guys for ur suggestion:) amishcake and simes

  • Login not working after configuration update

    I have a Pavilion g6-2235us running Windows 8 Metro. Yesterday afternoon my screen said "System Configuration/Updates in progress ... do not power off" This morning when I turned on my laptop ... it went to the metro login screen name and when I entered my password ...it said Welcome then went back to the login screen. Tried this a few times with the same results.
    Also, my Admin user name was gone and when I booted to "Recovery" there were no restore points.
    Any ideas as to what happened? If I do a backup to my external HD then reset to defaults .... can I recover my backup files once I'm logged backin?
    Thank for your help!
    Joe 

    There are some ways you can recover your password and there are some 3’rd party S/W’s that may work. One way to do it is to follow the link below even though the steps are for Windows 7 it should work in 8 too. 
    http://www.howtogeek.com/96630/how-to-reset-your-forgotten-windows-password-the-easy-way/
    And you can also try to do it using a 3’rd party S/W at your own risk it may or may not work but it’s worth a try if your data is really important. This video has all the info abt it.
    http://www.youtube.com/watch?v=40zDUCoysr0
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Ram slots not working after CMOS reset

    Im using MSI K9N Neo V2 mb, and it was doing fine until i reseted CMOS. Now 3 out of 4 ram slots are not recognized by BIOS nor Windows. Im sure that ram memory is ok, cause ive checked all of it by replacing it between ram slots, and they're only working in slot nr 4.
    I know that the MB is old, but everything was working fine, and suddenly went wrong after CMOS reset
    Things i did to fix:
    Updated BIOS
    Msconfig memory uncheck box
    Cleared CMOS with jumper
    Replaced CMOS BAT
    Checked if smth's wrong with cpu
    Cleared RAM slots with rubbing alcohol
    System wont even boot without memory in DIMM 4 (ram slot 4), and BIOS only recognizes memory in DIMM 4
    This is really frustrating, because there is no reason for smth to not work all of a sudden
    Any help? Tnx
    Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

    There is a known issue with Powerbooks with the lower memory slot failing, and it sounds like yours may be starting to fail. At one point there was an Apple recall for a small sliver of Powerbook systems to fix that.
    The alternatives are to run with 1GB in the upper slot, try one of the internet vendors that say they can fix that (check references), or install a used logic board. I don't believe Apple is repairing Powerbooks anymore, so if you want to buy a used logic board, you'll need to install it yourself, or perhaps an Apple Authorized Service Provider would be willing to do the work.

  • Auto spellcheck not working after a reset

    I had to reset firefox and since then my automatic spell check has stopped working. I have been into options and the 'check spelling while typing' is checked. I have rebooted, it is still not working. How do I get it working?

    Hi purplequeennl,
    Did the attribute change?
    In about:config check these settings:
    layout.spellcheckDefault
    It should be 1.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • 3gs not working after factory reset

    restored factory settings and now have apple logo on screen and phone is doing nothing please help

    If you got this after choosing "Erase all content and settings" in the Reset area of the Settings App on the iPhone the fix is DFU Mode Restore.
    But first do a Reset, Hold both Home and Power buttons until the iPhone begins to restart. Usually less than 20 seconds.
    If nothing, then DFU Mode Restore.
    With iTunes open on Computer, connect iPhone, hold both Home and Power buttons for exactly 10 seconds, release Power button, keep holding Home button until iTunes recognizes iPhone in Recovery Mode. This is usually less than 30 seconds more time. If the iPhone screen is now blank, then this is DFU Mode. Restore iPhone Firmware. If you have the Connect to iTunes screen on iPhone this is Recovery Mode, you try the Restore anyway. If it works great, if not try again to get DFU Mode as I described. Even experienced users can have trouble getting DFU Mode, just keep trying you will get it. DFU = Recovery Mode with blank screen.
    If this does not work and you have Warranty or AppleCare Coverage take iPhone to Apple for resolution.

  • ISE 1.1.1 login not working after install on VMWare on ESX 5.0

                       I did an ISE 1.1.1 installation on a VMWare with ESX 5.0. After installation I am not able to login with my credentials(username admin, password XXXX) I can ping my ISE server after initial installation but  I can not ping my ISE server after full installation.
    I did the installation several times and even did it on a VM with differrent VMversion.
    Anybody seen this before?
    Thank You
    Dirk

    Hello Dirk,
    I am giving you the installation guide for ISE on VMware and Esxi server. Please follow the steps, i have done my installation using this guide only.
    http://www.cisco.com/en/US/docs/security/ise/1.0.4/install_guide/ise104_vmware.html

  • Time Capsule Not Working After Hard Reset

    A few weeks ago my MacBook Pro started slowing down to a crawl.  Eventually ralised it was due to Time Machine not finding the Time Capsule - a known problem.
    Reset the Time Capsule (2TB, 8 months old) but although the Internet is working the light is still flashing amber.  Carried out a hard reset and still get back to the same situation - the internet is working through the Time Capsule's wireless network but I am getting the flashing amber light.
    My internet connection comes into the house and into a wireless modem.  An ethernet cable from the back of this modem comes up to my office where the Time Capsule is located into a fast ethernet swtich and then an ethernet cable goes from the switch and is then plugged into the back of the Time Capsule in one of the three internet ports with the <<->> markings.
    AirPort Utility shows me that the internet is working and has a green light whereas the Time Capsule has a flashing amber light and 2 errors.  When I click the Time Capsule it tells me that the status is:
    - Double NAT
    - Ethernet Unplugged
    Does anybody have any ideas?
    TIA

    I was having problems with the 7.3.1 firmware as well. For me, in manifest as though the internal disk had went bad--a blinky amber light and a "Disk needs repair" error. Rolling back the firmware solved it for me.
    To do this:
    --Open AirPort Utility.
    --Click on your TC.
    --Click on the "Manual Setup" button.
    --When the configuration summary pops up, click on the word "Version".
    --From the "Upload" drop-down list that is on the new pane that pops up, select "7.3", and click "Ok".
    --Once it reboots, it'll be at 7.3.
    Hope this helps. I'll be waiting a few weeks after 7.3.2 comes out to upgrade. I'm not real impressed with 7.3.1. As far as I can tell, it broke more than it fixed.

  • Messages on my MacBook Pro is not working after factory reset, how can I enable it?

    I just recently (yesterday) got my MacBook Pro Mid-2012 restored after having a few issues with it. So it is totally "clean."
    Today I tried to open Messages which worked previously, but it wouldn't let me send a message to anyone (who I could message before the restore) and if I was able to send a message it would show an "Message Can't Be Sent" symbol next to it. I went to Messages > Preferences > Accounts > and saw that my account was enabled but my email used is in a grey font and it will not let me add my iPhone number.
    I have signed in and out, deactivated and reactivated the account and I still cannot message anybody.
    Please help guide me into fixing this, I have looked at other boards and it doesn't really help me with my predicament. How can I send a message?
    Also in the Messages menu, "My Status" is grey and I can't click anything and as well with the "Log In" option. If this can help developing an idea of what might be wrong.

    It won't send it to other emails, but it will for phone numbers. Not sure why, but if you can help with sending to other iMessage emails I would appriciate it :-)

  • Keyboard Backlight not working after SMC reset

    I have a Late 2009 MacBook Pro, and I noticed that the backlight for my keyboard stopped working last night. I Performed an SMC reset and powered the computer back up. Again the backlight never came on, but I noticed that if I pressed the keyboard brightness buttons the icon that used to show on the screen showing what the brightness is at, (like the volume one), was not showing up anymore. I checked the keyboard settings and noticed that the auto brightness for the keyboard dissapeard. Anyone have any suggestions?

    try to reinstall your firmware, im having the similar problems, but reinstalling wont let me.... http://support.apple.com/kb/HT1237

  • MDT 2012 update 1 auto login not working after recover from domain

    I have two domains. The old domain is a single label domain and when running the deployment task sequence it joins the domain and auto logs in as local admin no problem. When I change the same task sequence to join the new . local  domain the pc joins
    the domain but fails to login as local admin. I get unknown user name or password. I hit ctrl +ALt+del and it is trying to login as the domain\administrator. Local admin password is correct in the unattend.xml. I have the PC's going to the "computers"
    Container when joining the domain. Any help would be much appreciated.

    I have Administrator as the user   .   as the domain and the correct password. When the deployment fails to login the username is    "domain"\administrator.  Anywhere else I should be looking???

  • N96 Maps not working after hard reset

    Hey Everyone
    Merry Christmas! I've recently done a hard reset on my N96 (V11) and I used the copier in PC suite to reload everything back on, however I can't get maps working properly. It shows my current location but can't calculate a route, it's just hangs on 'calculating route'. I've tried renewing my licences but this doesn't seem to be working?????? any ideas????

    Try this.
    This problem is usually caused by corrupt map data.
    To fix this issue, you first have to delete the current map data. Using File Manager, delete the "Cities" folder on your memory card/mass storage.
    Then start up the Nokia Maps application so that it recreates the folder and file structure required for the map data.
    Finally, reinstall your map data and voices to the phone using Map Loader.
    The latest version of Map Loader can be downloaded from
    http://europe.nokia.com/A4984199

  • Touchpad not working after Factory reset through Desktop manager os6 BB 9300 curve

    sir,
          I tried to factory rest my blackberry curve 9300 through desktop manager but the thing is after booting up im getting a licence agreement popup but im unable to scroll down.
    dont know why ??
    please help me

    Hello vamsy_sid and welcome to the BlackBerry Support Community Forums.
    Sorry to hear you're having an issue with your device.
    Did your trackpad function normally before you did the reset?
    IfyouhittheSpacebaronyourdevice, doestheagreementscrolldowntotheIAgreeorIDisagreeboxes? 
    If you reboot by pulling the battery, are you then able to scroll down on the agreement?
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Fingerprint Reader not working after windows password reset

    Hi There
    I was using windows login (single admin user) and fingerprint reader to login to my Thinkpad T510. Yesterday night I changed windows password and I didn't update finger print. Unfortunately I am not able to login when I tried to login using windows login today, I forgot the password and when I tried finger print reader it is just throwing error.
    Why finger print is not working after windows password reset? What should I do to login?
    Help would be appreciated!!

    I just called the tech support just now? I just asked the 'why the finger print reader not recognizing the finger print after changing windows password?', and he gave the following answers
    1. You should change fingerprint while changing windows password.  I don't understand the reason behind it, btw is this true?
    2. We can't do anything for this issue.

  • My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
    Have you tried deletting the plists for MAS?
    This page might help you out...
    http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
    Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
    Let me know how you get on?
    Thanks.

Maybe you are looking for