Login page keeps going to "Create new user account" on login

For about 3 weeks, whenever I log in, the next page I get is nearly always the "Create new user account" page. This happens regardless of whether I wait to let AutoFill enter my user name and password or whether I fill in the correct info myself.
When I click the back button on my browser and finally arrive at the page with the forums list, I'm always registered as logged in. But sometimes I just end up back on the login page with a blank entry box.
How do I get to the forums page without having to get out of the "new user account" page first? (While this isn't a huge problem, it's time-wasting and kind of annoying, and it didn't used to happen.)

Hi Turtlewiz!
Have you tried deleting your browser cache & cookies?
Good Luck!
ali b

Similar Messages

  • Old user account not accessible - Had to create new user account

    Why was I forced to create a new user account in order to access Apple discussions? The last time I had posted to Apple discussions was 11/06. From the emails notifying me of replies to my post, I can still go to the link where my question and the replies are. Last week I wanted to post another question. Instead I encountered a circular problem. Every time I tried to log in to discussions with my Apple ID and password (the same as my .Mac name and password, which were working fine for accessing .Mac), I was told that there was an error in my password. When I tried again, I was repeatedly re-directed to a "create new user account" web page that listed my .Mac email address as my Apple ID, as it should have. I tried to re-create my old user account with my own [real] name (as before) and was told that name was in use! Of course, it was me! (I had always used by real first name and surname as my name on Apple discussions.) So finally, very frustrated, I created a new name, a nickname, for discussions, and it worked. Now, all my previous posts are gone. It's as if I didn't exist in the Apple world until today, 9/16/07, but I originally had established my user account in 2004. I tried asking about this in a phone call to Apple support, but I was re-directed to the .Mac web site. Then I posted a question at .Mac feedback to no avail. I had a feeling that as soon as I "obeyed" and created a new user account that wouldn't be recognized as myself, my past posts would be sent into oblivion. I don't like losing all my previous posts that were attached to my user account. I have found this problem very frustrating and would really like an explanation.

    Hi decemberbaby,
    Try this procedure.
    Delete all the Apple Cookies in your browser, and empty the Cache.
    Go here Discussions Sign In, and try logging in with your original Apple ID again.
    If that still doesn't work, delete the Cookies again, and go to My Info, and log in with the original Apple ID.
    If you get the error message "Your Apple ID or password was entered incorrectly.", click on "Did you forget your password? Click here for assistance".
    On the page that opens, you can also click on "Forget your Apple ID
    ali b

  • If you can't 'Create new user account' - try this!

    Over the last few days I've wasted many hours trying unsuccessfully to create a new user account so I can post to Apple Discussions. Kept going round an endless loop, back to the 'Create New User Account' form. Tried every possible solution I found through internet searches, to no avail.
    The answer, for me, turned out to be simply choosing a different alias - one that nobody else was using, presumably.
    Why, oh why, isn't there an error message that tells you this? It would have saved me so much time and frustration - and many other people too, I'm sure.

    Welcome, finally, to Discussions - you are not the first to complain about this, if you like, you can go to app.com/feedback and register your complain there as well.

  • Can't create new user account....

    Hi- I am trying to create a new user account so that I can see if some of the issues I am having with my G4 Mac also are issues under a different account. I have (several times) created a new account and assigned a password and also tried having no password. Either logging out or using Fast User Switching, I click on the new user icon and either type in the password (I know I have it correct since it's my default password) or not type it in if I have no password set, and click on login. That's when I get the shaking window. No matter what I do, I can't login!! I am at a loss of what to do or what could be causing this. Any help will make me a happy Mac user again! Judy
    PS- After I had this problem surface, I ran Monoligual and got rid of lots of language support and I also ran Font Nuke to clean out some font caches.... but these were run after I had problems setting up a new user account. I was having issues with the new upgrade for my genealogy program, Reunion (still having issues actually-they can't figure out what's causing the problem) and I removed some "things" from Login Items. Can't tell you what they were but I have some there still. I ran Disk Warrior and iDefrag also recently. Also have repaired permissions. The other issue I had (yesterday anyway-haven't used it much today yet) is that Safari was crashing when I was accessing my public library's online catalog............. I don't know if any of these are related to my inability to create a new user account or not but thought I'd throw that into the mix.

    You say a dialog comes up for you to enter a password when you don't have a password while using Fast User Switching. That should not happen.
    If you set up an account without setting the password, Fast User Switching won't bring up the password dialog for that account. Instead, it will instantly switch to that account when you choose it.
    Make sure there is nothing in the password field when you set up the account, or change the password and don't type anything in for either the new or verify fields. It'll ask you to confirm that you don't want a password and "Cancel" will be the default button. Choose the "Ok" button instead.
    That should do it. If not, then I have no idea.

  • Windows 7 Home Premium problem creating new user account

    I am unable to create a new user account on my Windows 7 Home Premium computer. I have 3 accounts on it already, two are adminstrators, and just trying to add a fourth one (standard user).
    I go to User Accounts, click Create new account, give it a name, keep Standard user checked, and press Create Account. The account appears to get created and shows up on the User Accounts screen, though it shows that it is password protected already, even
    though I didn't have an opportunity to give it a password yet. I can manage that new user account and delete the password, and it then shows up on User Accounts as not having a password.
    When I try to log on as that user from the main logon screen, it prompts me for the password (if I have specified one), but it doesn't accept the password (I've tried defining and using various ones), and I get the message "The user name or password is incorrect".
    If I don't define a password for that account, when I click on the account button to logon, I get that same error message immediately.
    I also noticed that C:\Users doesn't include the new user account folder there. Don't know if that should've been created at this point before logging on for the first time. I also noticed that there's a "Default User" folder that has a lock on the folder
    icon, and I'm not able to open that folder (says it's invalid). There is a "Default" folder there with some content in it and I am able to view it. Don't know if either of these folders act as templates for new users.
    At some point months ago I did have a profile problem with one of the existing accounts, and had to follow some suggestions on repairing that user profile. Don't know if that perhaps has complicated things. The 3 existing user accounts are working fine.
    Any tips on what I can try to get a new account established?
    Thanks, Chuck
    Chuck Mastrandrea

    I am unable to create a new user account on my Windows 7 Home Premium computer. I have 3 accounts on it already, two are adminstrators, and just trying to add a fourth one (standard user).
    I go to User Accounts, click Create new account, give it a name, keep Standard user checked, and press Create Account. The account appears to get created and shows up on the User Accounts screen, though it shows that it is password protected already, even
    though I didn't have an opportunity to give it a password yet. I can manage that new user account and delete the password, and it then shows up on User Accounts as not having a password.
    When I try to log on as that user from the main logon screen, it prompts me for the password (if I have specified one), but it doesn't accept the password (I've tried defining and using various ones), and I get the message "The user name or password
    is incorrect". If I don't define a password for that account, when I click on the account button to logon, I get that same error message immediately.
    I also noticed that C:\Users doesn't include the new user account folder there. Don't know if that should've been created at this point before logging on for the first time. I also noticed that there's a "Default User" folder that has a lock on
    the folder icon, and I'm not able to open that folder (says it's invalid). There is a "Default" folder there with some content in it and I am able to view it. Don't know if either of these folders act as templates for new users.
    At some point months ago I did have a profile problem with one of the existing accounts, and had to follow some suggestions on repairing that user profile. Don't know if that perhaps has complicated things. The 3 existing user accounts are working fine.
    Any tips on what I can try to get a new account established?
    Thanks, Chuck
    Chuck Mastrandrea
    I agree with the same problem and the answer below did not work either.  I tried changing permissions to Users directory and that did not work either.  I even tried creating the directory name of user I wanted to install and that was recognized and
    being used, but will not start a user directory for new user.

  • Cant create new user account

    I have migrated my accounts from my old G5 to new Mac Pro and they all work just fine. However when I try to create a new user account for my youngest daughter whilst everything appears to be fine on creation when i try to switch between my admin acount and her account with the correct password (less than 8 characters) all I get is the starscape with no icons, no dock, no mouse! The only way out I can find is to completely reboot the mac from the power button on the front (power down and power up again).
    I have tried deleting and recreating different accounts all with the same result. The original 3 accounts that migrated all work OK.

    Well repairing permissions made no difference. But the problem seemed to lay with parental controls, when i made some changes to that in the new acc it worked but will only work with with basic desktop

  • How to create new user account and delete old one?

    Greetings,
    we have wanted to change our alias on the discussions group but understand from the frequently asked questions section that,
    "Once you create an alias, you cannot make changes to it. If you want to change your alias, you will need to create a new User Account".
    However it does not go on to tell us specifically how to now set up a "new User Account". Could someone specify how to do this? And if we do this, how would we then delete the current User Account? Thank you.
    Chris

    Colleen Von Eckartsberg wrote:
    Thanks for the reply.
    However I am still confused. I originally thought the "user account" referred to an account specific to the Discussions Forums, not the general "Apple ID" however your email seems to suggest they are one and the same....Please clarify.
    If so, however I do not think I am able to change my Apple ID. As I am a mobile me user I am required to us my mobile me address for my apple ID.....and do not think I can have two ID's with the same mobile me address.....
    Any additional thoughts are appreciated. Thanks.
    Chris
    Not with the same Primary address, but you can use your MM address as a secondary one. That is how I have my 2 Apple IDs setup. 1 uses my Dot Mac address and the other uses an ISP address as the Primary with the latter having my Dot Mac address as an alternate address.
    Warning, even if you create a new account, you won't be able to use your current ALIAS with the new account.

  • Account mail for user can't create after create new users account

    Hi,
    I have a recent installation of Server MacOS X 10.5 like advanced server. The services DNS, DHCP, OPEN DIRECTORY and MAIL are lifted and they work very well.
    Now when I believe a new user account, it is not also believed the mailbox of messages in the mail server in spite of activating the electronic mail service in the user's account.
    Please somebody can help me.
    Thank you!

    Mailboxes are created only when they either receive mail for the first time or are accessed via IMAP the first time.
    HTH,
    Alex

  • Moving itunes content when creating new user account

    Recently added two iphones to our rapidly growing apple family of devices.  Our imac was originally set up with just one main user account the whole family shared.  The problem I have is with sharing, syncing, merging with my iphone all family shared information.  For example, the contact list on the shared family mac is huge and includes many "x-mas card only people" that I will never need to call.  Same with shared calendar.  If make some quick notes or reminders on my calendar just for me, it replicates on to everyones device.  The guy at the apple store suggested I should have my own account.  I have done that and am now seeing the limitations OSX puts on different accounts as it seeks to protect each account.  An example here is trying to share and use our iphoto library.  My goal is to have itunes in my new , separate account that syncs to my own contact list (won't change back to the full family list every time I sync), has just the apps I want (not my daughters 300 apps that seem to keep re-appearing on my phone), still be able to sync to the family calendar but maybe have one of my own as well, have my own playlists from itunes 9I was able to find a way to access the big family music library in my account) and be able to build iphoto albums to sync.
    I think problems stem from a lack of understanding the basics of what separate "accounts" really can and can't do as it relates to different applications and devices.
    Thanks for any help!

    Drag \Music\iTunes folder to \Users\Shared.
    Log in to the new user account and copy \Users\Shared\iTunes to \Music\iTunes.

  • Created New User Account but iTunes Still Crossing Over.

    I just purchased a nano for my boyfriend and I created a new user account on my PC so the iTunes for his nano will not interfere with the iTunes for my mini. After I created his account and logged on I noticed that the icon for iTunes for my mini is already on his desktop. Deleting the iTunes on his account will cause the iTunes to be deleted from my account and I will be forced to start from square one. Why can't the iTunes for the mini stay within my account?!?!?! Should I go ahead and install the nano software??

    After I created his account and logged on I noticed that the icon for iTunes for my mini is already on his desktop.
    If you double-click this icon, do the items in your iTunes library show up? Unless you've moved the iTunes library to a shared location, the contents of the library should not show up in a different account, but the iTunes icon and application itself will.
    Why can't the iTunes for the mini stay within my account?!?!?!
    The iTunes application is available to all accounts on the machine, but the iTunes library is specific to one account unless you've moved the library to a shared area and told the iTunes application where to find it.
    Should I go ahead and install the nano software??
    Only if the version of iTunes and the iPod updater on the iPod nano's CD are newer than the version currently on your computer.
    (14736)

  • Can't create new user accounts

    I somehow lost the ability to create a new user account. I currently have two admin accounts and would like to create another account. I can go through the setup with name, password, etc but when i hit create i get the spinning loading sign and a beach ball for minutes. Finally, with me force quiting system prefs.
    I've run permission and disk check and everything came back fine. Is there anything i can do?
    Message was edited by: jrsz24

    If installing the COMBO didn't do the trick, then start over, reinstalling SL from the install disc, and see if that fixes the issue. If so, rerun Software Update, installing everything that pops up, repeating until your software's up to date, repair permissions, and restart. If not, then I'm out of ideas and you need to contact AppleCare or take the machine into an Apple repair station.

  • Migration Assistant created new user account & can't delete it

    Hi - I'm a new Mac user (MacBook Pro). I seem to have an extra account and am not sure why. Here's what happened:
    I setup my MacBook Pro and did not run Migration Assistant at that time. I later ran Migration Assistant to migrate PC files to the MacBook. A second account was created after the migration. All my PC content is in the second account. None in the original account. When I look at the Users & Groups in System Preferences, I see that both accounts are Admin accounts.
    I do not want the original account that was created for me on the MacBook Pro before I trasnferred any of my PC files over.  I just want to keep the account that was created to house all my PC files when they were migrated over.  However I cannot migrate that original account - the " - " is just greyed out. 
    Please can someone advise how I delete it.  I do not want two admin user acconts - just the onen with all my PC files in.
    I realise I should have done the PC transfer at start up using "set up assistant" but for whatever reasons I chose to delay it by a day or so and hence used Windows Migration Assistant.
    Please tell me how I can delete the surplus user account created for me originally when I used the Mac for the first time.
    Thanks in advance for all feedback and advice.  This is my first Mac after 20 years of Windows, so big step for me and still learning!  So easy to understand instructions please would be bonus
    thanks all

    Unfortunately I see that no one has been able to help me with this . . . so instead of addressing the question above. can someone please tell me how to reset my Mac to "factory settings", ie how it was the day I bought it and before I switched it on for the first time.  Delete everything on there now. That way I will do set up properly and transfer data from my PC first of all instead of revisiting it. 
    Please can someone tell me how to do this
    Many thanks

  • I've created new User account on my PC for separate itunes library/account. Have had to change apple id to do this. When I connect to pc, itunes opens with CDs I've already loaded, but it doesn't recognise ipod. No left panel opens with devices. Help!

    Can anyone help? Two ipods with originally one itunes library and (I think) same Apple id). Now need 2 Libraries with separate account for separate buying etc. Recommended I create new library on separate PC User account which I have done together with new apple id. I have added this apple id to the ipod needing separate account. When I hook up, I can't sync. No 'Devices' left panel appears at all. I'm at a loss here so any help woudl be great. Thanks.

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    If necessary:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • Not able to create new user (account)

    I would like to create a new user on my account, but when I click on the + sign I get no response. It is not grey'd out, and appears to be an option - the lock is open, and I am the adminstrator signed in as such(there is currently only one account on the compuer)
    I've tried the obvious solutions like restarting. Any tips?
    Thanks!

    To confirm:
    This is in reference to OS 10.3.9 user accounts - not iPod.
    I didn't mean to post in this forum!

  • Error Creating New User Accounts when Setting Terminal Services Attribute

    We have just started receiving this error when new users are being created in our domain as part of the new hire process. Does anywhere have any pointers on where to look and what to look for?
    ErrorError
    com.waveset.util.WavesetException: WTSQueryUserConfig() failed - Attribute: 'Terminal Services Home Directory Drive' Error: The specified user does not exist.
    Is this something that would indicate that AD isn't replicating across multiple domain servers yet, and thus when it tries to set this attibute this command isn't finding the account? If that is the case is there a way to have a retry put in?

    May I ask what version of IDM you're running?
    There's a known bug that relates to this functionality. A quick review shows it's a pretty close match (not 100%) to what you described.
    Bug 20728: Setting AD 'Terminal Services Local Home Directory' to null in IdM results in WTSSetUserConfig error
    It's fixed in 8.1.0.3(or later), 8.0.0.10(or later), or 7.1.1.14(or later).
    For the record, the latest IDM patches can be obtained here with valid credentials:
    http://sunsolve.sun.com/show.do?target=patches/zp-Software_Network-Internet_Identity_Manager
    Regards,
    Alex

Maybe you are looking for