Login problem after change in Domain name of portal

I have installed portal 3.0 Beta on windows 2000. installation has gone fine and everything was working. after this i made change in domain name. for this i ran ssodatan.cmd script (source from metalink).
now i am not able to go by
"http://domain_name/pls/portal30/
it gives the error
"The request for content either timed out, or produced an error, after 0 seconds in the browser"
Still i am able to go by "http://domain_name/pls/portal30_sso/" further if i login as any user, then all user are coming with "login server home page" as initial page.
any idea?
null

Hi Suzette,
I have portal 3.0.6.3.3 Beta i.e apache listener. For this i have not found domain name in registry. i made the following changes in htppd.conf file.
ServerName 194.170.231.141
<VirtualHost 194.170.231.141>
DocumentRoot E:\ORAPOR\Apache\Apache\htdocs
ServerName www.ahi-carrier.co.ae
ServerAlias ahiweb 194.170.231.141
</VirtualHost>
This 194.170.231.141 is my Fixed Internet IP.
my webserver machine name, where the oracle portal is installed is ahiweb(192.168.0.247).
also i have firewall before the web server.
Is these settings are OK for Portal.
I am using apache listener for my developer forms and reports, and they are working fine with these setting on the internet.
can i get white paper for these settings.
Thanks
null

Similar Messages

  • How to change the Domain name of portal

    Hi All,
    We've developed an application using the WDA(Web Dynpro for ABAP) on BI 7.0 and in this we are displaying the BI reports as well. This whole appliaction works fine when we run this on the BI portal 7.0. But when we run it from the Enterprise Portal 6.0
    the reports don't show up and it goes in the never ending loop. After research we found that this is happening because the
    Domain names of the BI portal and the Enterprise Portal are not the same. And as per one of the SAP note the prerequisite for the WDA application to run on the EP portal is to have the same domain name on both the portals.
    Now we are planning to change the domain name on the BI portal.
    Does anyone let me know how and where we need to go and change this Domain name ?
    Thanks in advance for your help.
    Regards,
    Alok Varma

    Hi,
    first step is to configure your DNS server. There has to be a name resolution for portal.domain.tld to your portal server's IP address.
    Right now I don't have access to Visual Administrator, so I cannot check if there is any domain specific configation to be done on the server side.
    As for the SSO between your Portal and WDA: you'll have to recreate the portal server certificates and import it into the ABAP system.
    The Logon Ticket MYSAPSSO2 has to be issued to the new domain by the portal! If not, your browser won't sent this cookie to the BI system and no SSO data will be transmitted to the BI system.
    br,
    Tobias

  • Problems after changing user folder name

    Hi everybody,
    My pc had a problem with the HHD so I needed to send it back to the repair centre. During the reparation the company created a user called 'user'.
    Since I had a backup that had to restore data in C:\Users\Andrea I changed the user's name as in this guide http://  superuser.com/questions/495290/how-to-rename-user-folder-in-windows-8 (I followed the step: 'I have
    already logged into that account' since that was my situation.)
    Now when opening Windows Update (only the desktop version, while the metro version works fine) I got this error
    http://  postimg.org/image/6c6konbhh/
    I hope someone has an idea of what's happening.
    Thanks in advance.
    P.S. Sorry for the links but I couldn't post links or pictures because the forum says that I am not verified.

    Create new user account with administrative privilege and try Windows Update.
    If same issue, follow the steps to solve.
    Start > Control Panel > System and Security > Administrative tools > Services
    Stop the Background Intelligent Transferring Service, Cryptographic Service and Windows Update service.
    then goto C:\Windows rename the Software Distribution folder as Software Distribution.OLD
    Reboot the PC.
    Now you can try Windows Update.

  • How to change (NT)Domain Name after installed ERP?

    Hello,
    We are planning to change (NT) Domain Name on environment of already installed ERP/BW(WAS 6.40)/SRM/SolMan(NW 7.0).
    We know SAP recommend that customer should be Re-install or System-copy SAP-System if the Domain name is changed after installed systems.
    However, we do not have enough time and budget for doing that.
    Questions:
    1). If the (NT) Domain name will be changed, we only need to change the
    OS users of service for SAP-System?
    (I think that it is needed to change only OS-users of SAP-service. Is there other setting for that?)
    2). The method of only changing users of SAP-service is not supported in this case?
    (The customer will be not taken the SAP-Official support after doing that?)

    Dear
    Changing domain name is not supported by SAP if done in a productive environment (after systems have gone live).
    You will probably not get support by SAP after you change the domain name once system is live.
    There are a bunch of changes you will need to perform as well.
    The domain name is probably existing in the RFC's and you cannot change all of those through SM59.
    You will need to update those entries at Oracle level.
    SAP parameters containing domain name
    Java environment where domain name is contained
    Reset hostname buffer
    Service marketplace
    SAP Logon
    STMS
    Monitoring perhaps, non SAP job scheduling
    Please reward points accordingly
    Kind regards
    Tom

  • OEM is not getting started after changing the Server name

    Hello DBAs
    Recently I installed Oracle database 10g on my a windows machine. It was working fine. Integrated OEM was also working fine.
    But now I have changed the machine name. Now Oracle Database has come up after updating the listener.ora & tnsnames.ora files with new server name. But OEM page is not getting open now. I tried after updating the emd.properties and other related file on ORACLE_HOME\sysman folder with the new server name. But no luck.
    In windows services one service named *"OracleDBConsoleDbname"* is not getting started, which could be the issue.
    Can someone please guide me what can be done to fix this problem.
    Thanks
    -Naveen

    Hi Naveen,
    What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
    What action needs to be taken if the hostname or SID of the database server is changed?
    If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
    Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
    And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
    Eric

  • Login problem after upgrade to mavericks

    Hi, i have login problem after upgrade from mountain lion to movericks in imac, I did enter the correct password But back to the login page again.

    Hi cpuman8,
    Thanks for visiting Apple Support Communities.
    If you're not able to log in to your user account after upgrading, try resetting your password using the method in this article:
    Resetting the original administrator account password
    In OS X Lion or later, you can reset your user password with your Apple ID.
    OS X: Changing or resetting an account password
    http://support.apple.com/kb/ht1274
    Best Regards,
    Jeremy

  • Change of Domain name and IP address - Urgent requirement

    Hi,
    The Oracle internet directory is installed as a separate component and we have a requirement for changing the ipaddress and domain name . Could any one please tell me what steps need to be done or any related documents for changing the domain name of OID.
    thanks in advance.
    regds,
    hussain

    Refer following for 10.1.2:
    http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/host.htm#BABJGDBH
    Hope this will help.
    Thanks
    Shail

  • ORA-12545 error after changing the host name as IP address in Tnsnames.ora

    HI,
    I tried to connect PHP and oracle in Red Hat linux. I got error ORA-12545 after changing the host name as IPAddress in Tnsnames.ora file. In sqlnet.ora file also i have entry for tnsnames in Directory_Path. I struggled so much but i couldnt solve that. Please give me ur valuable suggestions....

    12545, 00000, "Connect failed because target host or object does not exist"
    // *Cause: The address specified is not valid, or the program being
    // connected to does not exist.
    // *Action: Ensure the ADDRESS parameters have been entered correctly; the
    // most likely incorrect parameter is the node name. Ensure that the
    // executable for the server exists (perhaps "oracle" is missing.)
    // If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
    // host name to a numeric IP address and try again.
    Seems you specified wrong IP address.

  • Change of Domain Name causes loss of podcasts - help please

    Hi all
    For the past 16 months i've posted monthly podcasts on iTunes. Last month I changed the domain name of the website they were pinged from and (I assume because of this) my podcasts are no longer on iTunes.
    What's the best way to get my podcasts back? Do I:
    1 - contact iTunes as if this is a brand new podcast and then submit them all?
    2 - get iTunes to recognise that they are the same podcasts without having to go through the process for new podcasts (and if so, what is the best way to do that?)
    3 - other?
    thanks in advance for your help.
    Gordon

    Refer following for 10.1.2:
    http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/host.htm#BABJGDBH
    Hope this will help.
    Thanks
    Shail

  • Change outbound domain name

    Hi
    I'm running Sun Java(tm) System Messaging Server 7u3-17.01 64bit (built Jun 8 2010).
    My default domain is domain.com but my company change the domain name to xxx.com.
    I have add new domain alias by using associatedDomain: xxx.com. I working very well for inbound email.
    But the outbound email still display old domain name is [email protected]
    I want to change the mail from @domain.com to @xxx.com.
    Anybody help suggest me please.
    Regards,
    Chai.

    Take a look at How to Change the Default Domain Name (Doc ID 1359677.1) on MOS.
    https://support.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=1359677.1

  • Change in domain name

    Hi all,
    We had to change our domain name from servername.localdomain.com to servername.server.local due to some unavoidable reasons
    But while reconfiguring with new domain name i am getting below errors. Somewhere it is still stored the old domain name, Can anybody guide me the places where the domain names need to be changed.
    Launch external checker with next command:
    /X01/oracle/hyperion/common/validation/9.5.0.0/launchEssbaseJavaAPI.sh
    EssbaseJAPIConnect admin ****** servername.localdomain.com
    http://servername.localdomain.com:13080/aps/JAPI
    - failed
    Error:Result: -1; Error message: Cannot connect to Provider Server.Unknown host.:
    servername.localdomain.com
    Thanks in advance !

    Hi
    In Foundation Configuration, I Just deployed to Application Server. ( I mean i selected only deploy to application server)
    The error i got in configtool.log is below
    (Feb 15, 2011, 09:25:25 AM), com.hyperion.hit.registry.ComponentImpl, ERROR,
    java.net.UnknownHostException: severname.localdomain.com
         at java.net.InetAddress.getAllByName0(InetAddress.java:1133)
         at java.net.InetAddress.getAllByName0(InetAddress.java:1098)
         at java.net.InetAddress.getAllByName(InetAddress.java:1061)
         at java.net.InetAddress.getByName(InetAddress.java:958)
         at com.hyperion.hit.registry.ComponentImpl.getHost(ComponentImpl.java:247)
         at com.hyperion.hit.registry.ComponentImpl.setHost(ComponentImpl.java:439)
         at com.hyperion.hit.registry.ComponentImpl.<init>(ComponentImpl.java:159)
         at com.hyperion.hit.registry.ConfigBeanComponentImpl.<init>(ConfigBeanComponentImpl.java:49)
         at com.hyperion.hit.registry.ComponentFactory.instantiateComponent(ComponentFactory.java:122)
         at com.hyperion.hit.registry.Registry.newComponent(Registry.java:2309)
         at com.hyperion.cis.config.persistent.utils.RegistryStorageUtils.configListToComponent(RegistryStorageUtils.java:168)
         at com.hyperion.cis.config.persistent.utils.RegistryStorageUtils.configBeanToComponent(RegistryStorageUtils.java:97)
         at com.hyperion.cis.config.persistent.utils.RegistryStorageUtils.configBeanToComponent(RegistryStorageUtils.java:91)
         at com.hyperion.cis.config.persistent.utils.RegistryStorageUtils.configBeanToComponent(RegistryStorageUtils.java:91)
         at com.hyperion.cis.config.persistent.store.RegistryPersistentStorage.store(RegistryPersistentStorage.java:68)
         at com.hyperion.cis.config.persistent.ConfigToolProductConfiguration.store(ConfigToolProductConfiguration.java:334)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:294)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    Thanks in Advance !

  • What modifications to be done after changing the Computer name..?

    Hi all...
    What are the modifications to be done after changing the Computer name..(Hostname) to connect the oracle. When i am restarting the TNS Listener manually, it is giving Error 1067.
    Please tell me, what are the modifications to be done, if i change the computer name.
    Thanks in advance,
    Pal

    You need to change your hostname/ip in listener.ora

  • Changing AD Domain name with Microsoft Exchange 2013

    Hello everyone,
    we need to change our Active Directory Domain name from .local to another naming convention.
    We are running a Windows Server 2012 R2 environment with Exchange 2013.
    - Domain Controller 
    - File Server
    - Exchange 2013
    Running on a VMware ESX Host.
    What is the applied way to change the Domain name? Or is there no way to change in the running Forest and we have to re-setup everything?
    Thank you for your answers.
    Regards,
    Sebastian

    Hello,
    You need install new Exchange server in your new enviroment (forest).
    Please read this link:
    Prepare mailboxes for cross-forest moves using the Prepare-MoveRequest.ps1 script in the Shell
    Other nice article:
    Moving to a new forest and retaining the same SMTP domain ( with native scripts ) -
    Part I
    Regards

  • Change internet domain name

    Good Morning,
    I have a windows 2008 sbs and i had configured an internet domain name(remote.xxx.com) with wizard from sbs console and all works fine, exhange and outlook clients.
    Then i changed internet domain name(remote.yyy.com) and now when i open outlook, it open an alert with a certificate error from old remote.xxx.com . if i press ok it works because exist a dns record that aim to exhange server with old name.certificate for
    new internet domain name is correctly installed
    why does outlook try to connect to old name yet?
    thanks

    Hi
    The certificate installed for Exchange has the old name, with most 3rd party certs you can make changes to the cert and then install a new one.

  • Modeler problem after changing domain name

    Hello GURUS,
    I had my BI7 on RHEL5 and MaxDB configured and working with hostname xxxbwd.yyy.pl. Today I had to change domain/host name to xxxbwd.zzzz.yyy.pl. I've changed it in /etc/hosts, changed profile parameter icm/host_name_full to new value and almost everything works.
    I have problem with starting modeler form t-code RSPLAN - it throws IE error "Page not found" and I can see that "old" domain name is called. Where do I have to type in new domain name to make RSPLAN work?
    Regs,
    FS

    Found it myself.
    Report RSPLS_LAUNCH_ADMIN allows to set such things.
    Regs,
    =FS=

Maybe you are looking for

  • Save PDF to disk

    Hi, I have an employee table which has all the details of employee, now i want pull the data for each employee and make a pdf file and save them to a folder on my machine with employee name as filename.Can anybody help me with some idea of doing this

  • I have an Apple Mac, 10.4.11, I have been told I need to purchase a software update now - what is the max I can upgrade to

    Hello - have a lovely old (??) Apple Mac version 10.4.11 -  I know i need to upgrade as apps such as Skype and facetime to name but a few don't work. What is the highest version I should upgrade to  - thx

  • Brush pop-up on wrong monitor CS5

    PS5 12.0 x64 on Dual-Quad 2.93 Intel Xeon w/ 16GB RAM. MacOS 10.6.3 When using the control key to get my brush modifying pop-up window, said window will only show up on the monitor with the menu bar. If the menu bar is switched to the large primary m

  • Payment Proposal Layout?

    Hi Guru's, When we run the proposal we are using the standard display variant. We want to edit this to add the invoice #, doc #, invoice date and total? Is there any way I can do this ? Also if I change this for one company code will i be changing th

  • Couldn't install new versions of itunes

    i tried to update the itunes to 11.1 for my windows 8 computer. but it can't. so i tried to uninstall it and install it with the new verison of itunes. but before finish it reloaded backwards and said that (Errors occurred during installation before