Login problem in that the radius server is not configured. And the local user does not authenticate

When trying to login, the message appears "No radius server configured" and the local user does not authenticate. How do I access without rebooting the Switch 6500 with CatOS.

Hi PK.
Thanks for your Attention. You know how to insert a line configuration via SNMP RW "set radius server 10.112.15.21 auth-port 1645 primary"?
I believe this way or can I work around the problem.

Similar Messages

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

I have installed photoshop elements 12. when I try use the editing features it said that i must login to Adobe to register the product. but each time i try to it said there is a problem. help the problem stated that the internet is not connected, but that

i have installed photoshop elements 12.
when I try use the editing features it said that i must login to Adobe to register the product.
but each time i try to it said there is a problem.
help
the problem stated that the internet is not connected, but that is not the case.

I had the same issue and I'm running Windows 7. Tried working with technical support for several hours but they were no help. They just had me doing the same things over and over, offering no real answers. I finally got fed up and have decided to return my product for a full refund.

My problem is that I am working on a page and then I receive ....Error saving the journal. Perhaps your session has expired-try reloading the page".

My problem is that I am working on a page and then I receive ....Error saving the journal. Perhaps your session has expired-try reloading the page". I used to receive from Firefox when reloading page...To display this page, Firefox must send information that will repeat any action'. Now I don't receive this message and I lose info that was entered. How do I get this to pop up again so I can save my messages.
Using Firefox 22.0 u to date

This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
You get an alert about resending POST data if you go back to a page or refresh a page that was previously requested from the server by submitting form data via a (hidden) POST form.<br />
Firefox can only make sure to get the same page by resending that POST form.<br />
Firefox doesn't know what that form data means, so Firefox asks for confirmation before resending that form data as such an action can cause you to repeat an action and buy another item or post a message another time.<br />
A way to prevent this pop-up about resending POST data is not to use the Back button, but to open links on a page requested from a server by sending a form with POST date in a new tab (window) with a middle-click or a Ctrl + left-click.

Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

Hi Everyone,
I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
to another computer.
My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
The following are some details about the problem:
1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
I know this because a current is being read on the current meter connected to field point module.
My questions are the following:
1. What are the possible reasons for the data not being sent to the field point module?
2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
Thankyou very much for any help that you can provide. I greatly appreciate it.
Faen9901

Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
choose to provide LabWindows/CVI support.
Regards,
Aaron

I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!

Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original.

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

My problem is that the iPod does not turn on. Everytime I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a warning sign.

IS MY IPOD DEAD?!?!?!?!?
I think I have the previous iPod Classic with a black glossy front and I am pretty sure it is glass at the front. My problem is that the
iPod does not turn on. Every time I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a
warning sign along with the Apple support website. At the same time I can hear the internal mechanics which is also very loud. I have attempted
to charge it as well as connecting it to itunes but no success. Could you please help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert". My problem is that the "convert to" field isn't active. I ca

When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert". My problem is that the "convert to" field isn't active. I can see the words "Microsoft Word" in pale gray, but when I click on the field, nothing happens.

You have posted in the wrong forum. Try posting in the forum for the product you are trying to use.
Here is a link to a page that has links to all Adobe forums... use the drop down list to see all.
Forum links page:
https://forums.adobe.com/welcome

I like to watch tvcatchup or sky go or I player on my iPad while falling asleep, the problem is that the iPad then stays on all night. I would like to find an app that allows me to set a timer for the iPad to switch itself off automatically.

I like to watch tvcatchup or sky go or I player on my iPad while falling asleep, the problem is that the iPad then stays on all night. I would like to find an app that allows me to set a timer for the iPad to switch itself off automatically, like the sleeper function on a TV.
Does such an app exist? Can anyone help me? Thanks

You can try the Sleep Timer.
https://itunes.apple.com/sg/app/music-sleep-timer/id320583424?mt=8

I have an iphone 4 and i'm having lot of problems: my back camera is blurred although my front camera is fine and working normal. my biggest problem is that the screen is showing colored horizontal lines

I have an iphone 4 and i'm having lot of problems:
_ my back camera is blurred although my front camera is fine and working normally
_ my biggest problem is that the screen is showing colored horizontal lines(as perhaps electrical problems). The phone did fell and I already changed its back and front but everything was normal until these problems appeared suddenly
Please can somebody help me to solve it and tell me what are the reasons?
Thx

you can try turning it off and on again, but i doubt that's gonna work, that sounds like more of a hardware issue. Your best bet may be to contact apple and seek service or replacement

Hi . My problema is that the premiere proo doesn´t installl in y Pc, becaseit says it can be install in a 64 vbits program. What can I do?. is a windows xp

Hi . My problem is that the premiere proo doesn´t installl in y Pc, becaseit says it can be install in a 64 bits program. What can I do?. is a windows xp

Hi There,
I would request you to check the system requirements, as there is a compatibility issue with the software and the OS version you are using.: System requirements | Adobe Premiere Pro
Thanks,
Atul Saini

Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?

Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?

Hey NicolasZen,
Thanks for the question and welcome to the Apple Support Communities. I understand that you are experiencing issues with “No Service” or “Searching” on your iPhone. The following resource provides some great troubleshooting steps that you may wish to try:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Your iPhone may have one of these symptoms:
- iPhone displays "No Service" or "Searching" in an area of good coverage
- iPhone doesn't regain service when returning to an area of coverage
Resolution
If you encounter either of the above symptoms on your iPhone, follow these steps to attempt to resolve the issue. Test after each step.
1. Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
2. Turn iPhone off and then on again.
3. Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
4. Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
5. Update your iPhone to the latest version of iOS.
6. Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
7. Restore the iPhone.
Thanks,
Matt M.

I connected my iPod Touch to a stereo system phono input using a cable with stereo jacks (red and white) on one end and that plugs into the iPod's headphone jack. The problem is that the sound is extremely muffled and bass-heavy, with little treble.

I connected my iPod Touch to a stereo system phono input using a cable with stereo jacks (red and white) on one end and that plugs into the iPod's headphone jack. The problem is that the sound is extremely muffled and bass-heavy, with little treble. I have to turn the bass control on the stereo receiver to pratically zero in order for the sound coming through the stereo to be acceptable. Is there a setting on either the iPod or the stereo that I need to change in order to fix this?

The phono input is for a phonograph. The iPod does headphne output is not that same as a phongraph output. Does th stero have an AUX input? That should be compatible.

The problems seems that the free trial what i am constantly paying for may have ran out/free trial time never contacted as i find this online to take to long and to hard to deal with yet a paying costumer restricted by some weird fault i don't get this t

the problems seems that the free trial what i am constantly paying for may have ran out/free trial time never contacted as i find this online to take to long and to hard to deal with yet a paying costumer restricted by some weird fault i don't get this tried every thing how can i be billed and money taken for hired subscription but end up with a "free trial" that cut me off having withdrawal as i live my life inside Photoshop

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Login problem in that the radius server is not configured. And the local user does not authenticate

Similar Messages

Maybe you are looking for