Login problem - strange new icon

Came to work on a Monday morning and, at login, found a small gray icon at the right-hand end of the password field. I've never seen it before & didn't find any mention of it in any documentation, or this discussion. When I tried to log in with my usual password, it didn't work. Rebooting the machine eliminated the icon. After that, login worked fine.
Has any one encountered this? I'd like to know what it's about because I'm connected to a not-very-well administered network. This may be a hint of other problems that are out there.

Nope . . . that has happened to me in the past, and is one of the first things I check. Besides, rebooting wouldn't have cleared a CapsLock problem. But it did clear the mysterious icon in the password field.

Similar Messages

  • E51 : a strange new icon appears and more ...

    few days back i had updated my one year old almost perfect E51. Prior to the update the only problem i would face was auto restart during long EGPRS data sessions(no 3G in India yet). After the update i observe that the auto restarts have reduced, the phone bootup time is prologned almost doubly and to it seems the voice call quality has gone a little down on both ends.
    Also after several new application downloads i have suddenly noticed a new ICON permanently appearing just below the Battery level indicator on the Home Screen. The new Icon shape is a TRAY (horizontally laid square bracket of keyboard) with a vertical upwards pointing ARROW in the middle of the TRAY.
    any idea what this icon stands for.
    Thanks,
    Solved!
    Go to Solution.

    I think you have some messages in your Outbox..
    N80 IE, E51, E71

  • Remove strange new icon - no downloads this page

    What is the the new icon that has appeared in the tool bar?
    Looks like a red duck with head phones on and when you hover your mouse it has no downloads this page?

    I would guess that it is part of a "download" add-on that you installed??

  • Strange new icon in iOS6 - looks like skinny battery with dot

    Anyone see this icon before? (It's in between the battery percentage and Bluetooth icon)
    Thanks!

    That's your handsfree bluetooth device icon, it shows up when you are connected to the device, the white color shows the battery status.

  • I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. Please help

    I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.

    zapgrap wrote:
    there is no information of locations.
    Then no information exists.  Use the Report a Problem button within the app to report it.

  • I just downloaded the new Firefox 4, rebooted, and viewed you videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

    I just downloaded the new Firefox 4, rebooted, and viewed your videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

    The Firefox icon is the default feature for Windows Vista and 7 only, it does not apply to Windows XP users.
    To have the Firefox icon instead of the Menu Bar:
    View > Toolbars and UNCHECK the Menu Bar.
    After that, click on the Firefox icon and you'll have the Menu Bar appear again.
    http://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing

  • I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

    i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
    When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
    Please HELP!!!!!! Getting second thoughts on Lion!!!!

    Hi b,
    Have you restarted yet?

  • Trying to update to 4.0 on my Mac. When trying to drag new icon to applications folder, it says 4.o already in place (it isn't), nad do I want to relace with older version. I do this and then it says change can't be done because Firefox is in use. ??

    trying to update to 4.0 on my Mac. When trying to drag new icon to applications folder, it says 4.o already in place (it isn't), and do I want to replace with older version. I do this and then it says change can't be done because Firefox is in use. ??

    That version cannot be upgraded further if it's a 2G model. The 3G model can be upgraded to iOS 5.x.x. You can't have a 2G model because the maximum iOS version is 4.2.1.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • When are iOS 7 new icons going to be supported on flash cc?

    When are iOS 7 new icons going to be supported on flash cc?

    There isn’t anything in the UI to let you select all the sizes, that will come in the next update hopefully (which won’t be for a few months). But, you can edit the app descriptor XML to add the missing sizes, and Flash CC will not delete those new lines.
    For what it’s worth, when you switch between iOS and Android publishing of the same app, all the icons are deleted from the XML, so you need to find a solution to that problem. I keep a text file like this:
    http://xfiles.funnygarbage.com/~colinholgate/files/iconsets.txt
    and I just copy and paste the right block of icons into the XML. That way with a new app I don’t even have to select a single size in Flash, let alone 18 of them.
    If you’re seeing the new sizes be deleted from the XML, either you’re using something earlier than the release version of AIR 3.9, or you haven’t done the Flash CC update from last week.

  • IMac login problems on any 10.6 update

    I have a 24" iMac that is 2 years old. After using snow leopard on my husband's new macbook I decided to get it for my imac. The base install of 10.6 works fine but of course it immediately wants to be updated to a new release. If I update it past the base install from the CD I get login problems.
    What happens is that the desktop appears and the finder menu is at the top but the date and network status etc - everything from the top right of the menu bar is missing. The computer will not move forward. No amount of waiting or button pushing will improve the situation.
    Sometimes I could log in to another account but then it would start happening on that acocunt too. I made myself a new account and it started happening on that too. Every time if I did a re-install of the base 10.6 from the CD it went back to working fine. I would have to say no to every update of 10.6 on software update. This has been going on for 6 months. I thought maybe with 10.6.4 they fixed it but it did it again.
    yesterday I did a fresh install. Thinking it was caused by my old quicken 2007 or parallels (though its v 5) or something else that has some bit that starts at login I formatted the HD , installed 10.6 fresh and installed nothing but ilife 9. I downloaded the 10.6.4 update and it still happens. I logged off my account and logged back in to test and it froze again. I am at my wits end. The only thing I saved from my old profile was my mail folder. I can find nothing else to fix. Any ideas?

    SamNS wrote:
    the desktop appears and the finder menu is at the top but the date and network status etc - everything from the top right of the menu bar is missing.
    Do things behave better if you boot into "safe mode" by holding down a shift key while your Mac is booting?
    http://support.apple.com/kb/HT1455

  • Simultaneous login problem

    Hi 
    I am having simultaneous login problems. In the past I have been able to sign into my skype account on both my Mac Book Pro and my Windows 7 desktop PC. However since I had to change my password I can only login into one machine at a time now. Also when I change my password on the desktop PC I can only sign into that skype / computer. Whenever I type the same account name and same exact password on my Mac Book Pro, it says it doesn't recognize my sign-in details but I am 100% sure that I typed it in exactly the same way as I did on my desktop. Another is that when I reset my password on my Mac Book those details won't work on the Desktop PC and vice-versa.
    I would like to know what is the problem in this situation, I am not sure if this is an application error or a networking error where the account details are not signing in from a different IP or MAC address.
    Please and thank you!

    "The load balancing was already functional:"
    Do you have a description how to do that?
    I Would like to know how.
    "so ALL traffic, not going to the LAN network and so over this interface, went out on the DMZ interface, with source IP from LAN."
    If you put the VPN servers behind 1-1 NAT instead they will use the firewall as GW and the VPN clients will get at your remote sites/LAN IF you add routing definitions in VPN config what networks are reachable through VPN.
    Or you keep servers as they are but also add add more routing definitions in VPN AND static routes to each server with the firewall as gw to those remote networks. Default gw will still be through the DMZ IPs though.
    The problem with more than one VPN client from behind same IP address is, with your current server settings, most likely because of the client side NAT router isn't coping with the task. Your public IP VPN server(s) should mean NAT VPN problem is at the other end (customer/client network router/firewall).
    If two VPN clients behind same NAT router connected to different servers at your end, "12.34.56.80" and "12.34.56.81" (both are public IPs?) respectively I believe at least two should be able to connect.
    3G/4G modems isn't an option?
    Maybe try bringing your own tested working portable router (ethernet/wifi maybe includes a VPN client that connect to your servers) to the customer and put it temporarily on their LAN? There are these small new 3G/WiFi routers too. Depends on wether you need to be connected to customer LAN or not.
    Try other VPN solution, SSL or OpenVPN?
    Use both PPTP and L2TP simultaneously (PPTP could be troubelsome if GRE/TCP 1723 passthrough is disabled)?

  • Strange finder icon in my dock!

    I have a strange Finder icon in my dock that looks like it has a glass box over it. I know it definitely is not supposed to look like that. I have tried the following:
    - Restarting
    - Moving Dock from side to side to bottom
    - Changing wallpaper
    - Changing magnification settings

    Someone posted this problem a couple of years ago. Doesn't seem like anyone had an answer then.
    http://forums.macrumors.com/showthread.php?t=455721
    This is really weird.
    Regards,
    Steve M.
    Message was edited by: Steve M.

  • Strange Voicemail Icons - Displaying 1+ and Voicemail (-1)

    I don't know why, but my iPhone recently started displaying a 1+ icon on the phone homescreen, and when I go to my voicemail page, I have the same 1+ icon and up at the top where it reads voicemail, it displays "Voicemail (-1)"
    Has anyone seen this problem before? I posted screenshots here:
    http://i.nconspicuo.us/2007/11/15/strange-iphone-icons-phone-1-voicemail-1-voice mail-1/
    Let me know if there is an easy solution to resolve this.

    reseting the phone is rebooting it
    hold the home and sleep/wake button ( the one on top) down at the same time
    keep holding them down when the slide to power off appears - after a few seconds more the screen will go blank you can let go - the apple logo will appear and the phone will reboot

  • What's causing these power-up and login problems?

    I recently switched from Tiger to Leopard (installed by the repairers) and have encountered some power-up and login problems. Basically, my set up is that the computer automatically logs into a non-admin account, launches a Safari page, and then that's it - after checking the webpage, I logout of that account, into my main account, and work from there.
    In Tiger :
    A few times quite recently the computer would freeze, either while Safari was launching / opening the webpage, or when I tried to logout. Force Quit didn't work (total freeze) so I would force power-off and switch on again, and things would be fine.
    In Leopard, one of the following has begun to happen, about two weeks after I began using it:
    • The computer reaches the grey screen with an endlessly rotating gear wheel. (Power off / on again)
    • The computer logs in to the account; after selecting 'Log out...' I log out, but instead of giving me the login screen, it logs straight back into that account, and this happens every time I try 'Log out...'. (Use Fast User Switching instead to reach main account, where one or two software glitches prompt a Restart) This has happened twice.
    • This morning, the computer reached the blue screen where the pointer appeared - faded - appeared - faded etc endlessly (Power off / on again).
    Clearly it is not the System - experiencing problems in both Tiger and Leopard proves that. Nor is it my HD - I've had a new one installed. It must therefore be a setting in my login account, though it's hard to see what : I only use that account for login, and a single launch of Safari, and it's been ok for years.
    Should i create another login account and see if that solves the problem? By the way, the repairers did not give me any Leopard install disks, so please don't suggest that method of diagnosis. I only have the original Tiger disks.

    christopher rigby1 wrote:
    2. I don't know what Apple app(s) you refer to? As I said I've upgraded all the free ones, and iLife '06 is working (and I have the disks).
    Look in your Applications folder: Any Apple app there, except for the ones you've mentioned. And all the built-in parts of OSX.
    3. They told me that I CAN do a full restore from a Time Machine backup (via Disk Utility apparently).
    That should tell you something about the quality of their advice.
    See: [Mac OS X 10.6 Help Recovering your entire system|http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html].
    Or the *Restoring your entire system from a backup* section, towards the bottom of [Mac 101: Time Machine|http://support.apple.com/kb/HT1427].
    Or look up +*Time Machine+* in Mac Help.
    Or #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    And if there's a problem with your installation of OSX (which seems likely), or the Apple apps, you can't reinstall them, either.
    4. Having spent hours and hours getting the machine to work properly (upgrading Mail and sorting out Mail problems, upgrading Safari, re-upgrading iTunes and sorting out problems), I'm not prepared to spend hours and hours doing the whole thing in reverse to restore Tiger, including learning HOW to do that.
    Correct; unless you have backups of the Tiger system, that's impractical at best.
    So unless anyone has a reasonably simple, straightforward answer as to what this problem might be, it looks like I must live with it.
    You have some sort of problem with your Mac and it's not going to get better on it's own. Most likely, it will get worse.
    If you haven't, try the things recommended by Dale.
    Also try running the +Apple Hardware Test.+ It's on one of the disc(s) that came with your Mac, and is tailored to it's particular hardware. The disk should have +Apple Hardware Test+ and instructions for running it printed in very tiny type.
    I sympathize with your situation, but the repair shop violated the Apple license, and put you in an untenable situation. If they won't correct it by supplying the Leopard disc, you really should report them to Apple.
    You need to purchase a retail copy of Leopard (not the gray discs that came with another Mac; they won't boot yours). They're not shown on the Apple Store website anymore, and eBay and other sellers get a premium for them, but AppleCare should have them for the original $129.

  • Keychain "login" Problems   Can't remember my Keychain password.  Admin Password also does not help. Mac Mini(Late 2012) OS 10.10.2

    Series of Keychain "Login" Problems.
    Hardware: Mac Mini (Late 2012)  2.5 GHz Intel COre i5,  4GB 1600 MHz DDR3
    OS X : 10.10.2 upgraded yesterday
    Mail wants to use "login" keychain.   I enter Password but no success.
    CalendarAgent wants to use "login" keychain.   I enter Password but no success.
    Com.apple.internetaccounts.xpc wants to you "login" keychain. Password, not successful.
    At some point in past days I was offered to rename Keychain, so I did.
    In Keychain Access, I deleted "Login"    and selected Delete references.
    Just now I went into ~/Library/Keychains and found Login.Keychain and Login_renamed.Keychain.
    I have renamed Login.keychain -> Login-old.keychain.
    I renamed Login_renamed.keychain-> Login.Keychain.
    In Keychain Access, I added "Login" back.  This should be the renamed keychain.
    Original problems still persist.  No noticeable changes.
    Keychain wants to use the "Login" keychain.   Can't remember my password or it is incorrect.
    Help?
    TITLprods

    I turned off and turned on the computer.  When restarting it said that it could not use the Login and did I want to create a new or use and alternate?  I created new and for the moment things seem to be working under the command of the "New Login"
    That still doesn't really alleviate the problem of the old login.

Maybe you are looking for

  • Unable to Start Listner for 10g R2 after windows xp pro restart.

    Database worked just fine until a system reboot after installing the Apache server and Apex 2.2 The service start and I'm able to connect to the database SQL*PLUS without specifying the host string SQL*PLUS User Name: xxxxx Password : xxxxx Host Stri

  • Please suggest problem in increasing height repeating frames

    Hi, in my report normally up to 100 are printed. i setted the vertical elasticity as expand and horizontal as fixed. but while priting, in vertical, it is contracting if date is too short enough and expanding when dat is large enough. But what my req

  • URGENT:: regarding adding new field in the info type0002

    Hi, I have added tax number in the 0002 info type through pm01 and CI include and then i creatad a sub module to calll the TAX NUMBER. the added field is appearing in T588M table for that screen, but it is not appearing when i tryed to open a emploee

  • Messaging Hub not showing online friends...

    I got and update for my Nokia 920 last Friday [April 26, 2013] and I updated it. After updating [1232.5957.1308.0002] I notice that my Messaging Hub always telling me that "No one is online" even my friends are online. Any one encountered this proble

  • Bridge monitor size preview

    Feature request..... If you are rebuilding the bridge cache from scratch, it would be valuable to allow and option to allow you to specify the "Generate monitor-size preview"  monitor size.  This would be very useful if you are using an alternate mac