Login problems-------- Not clear!

Hi ,
I am trying to login to a BSP application with one user.I could get into debugging.
If I am doing with another user,its not.
Can anyone tell me why!
Thanks,
Uday

Hi Bharat,
Debugging has to be activated for each user. In WAS 640, you can do so from tx SE80. Goto Utilities->Settings->Abap Editor->Debugging. In the external debugging, set the checkbox for "Active" and enter the user ID for which you want to activate the debugging.
Hope this helps.
Saurabh

Similar Messages

  • Logging in to remote site, reset safari does not clear the user login info?

    I'm logging in to a remote site with a 2 step login.  Authentication then citrix.  User info is not cleared in the authentication portion when I reset safari.  Must be stored somewhere else.  Where should I look?

    Launch the Keychain Access application and search for the server name.

  • Keychain "login" Problems   Can't remember my Keychain password.  Admin Password also does not help. Mac Mini(Late 2012) OS 10.10.2

    Series of Keychain "Login" Problems.
    Hardware: Mac Mini (Late 2012)  2.5 GHz Intel COre i5,  4GB 1600 MHz DDR3
    OS X : 10.10.2 upgraded yesterday
    Mail wants to use "login" keychain.   I enter Password but no success.
    CalendarAgent wants to use "login" keychain.   I enter Password but no success.
    Com.apple.internetaccounts.xpc wants to you "login" keychain. Password, not successful.
    At some point in past days I was offered to rename Keychain, so I did.
    In Keychain Access, I deleted "Login"    and selected Delete references.
    Just now I went into ~/Library/Keychains and found Login.Keychain and Login_renamed.Keychain.
    I have renamed Login.keychain -> Login-old.keychain.
    I renamed Login_renamed.keychain-> Login.Keychain.
    In Keychain Access, I added "Login" back.  This should be the renamed keychain.
    Original problems still persist.  No noticeable changes.
    Keychain wants to use the "Login" keychain.   Can't remember my password or it is incorrect.
    Help?
    TITLprods

    I turned off and turned on the computer.  When restarting it said that it could not use the Login and did I want to create a new or use and alternate?  I created new and for the moment things seem to be working under the command of the "New Login"
    That still doesn't really alleviate the problem of the old login.

  • AOL email Login problem The requested resource (webmail/_cqr/LoginSuccess.apspx) is not available

    AOL email Login problem on Ipad 4, error message reads:
    The requested resource (webmail/_cqr/LoginSuccess.apspx) is not available.
    Apache Tomcat/7.2.27
    If I remove AOL app than re-add it. sometimes I get a day or so before the error message returns.
    My Aol email is accessable from my Iphone OK.
    Seaches for this error solution have been fuitless.
    Does anybody have any ideas?
    VOGO

    Add this statement to struts-config.xml
    <forward
    name="success2" path="/loginSuccess2.jsp"/>
    Before trying on tiles, you can add this statement in the method for handling the form in the class LoginAction
    return mapping.findForward("success2");

  • Problem - Custom Page Call Working via APPS login and not using CRM login

    I have created a custom link in the Oracle Portal order page. The call (click) works correctly when I login using a regular apps login and choose ORDER STATUS , but if I login directly to CRM and then access the same page via clicking on ORDER PORTAL image, the link doesn't work --> it seems to get translated to something I am not familiar with. I have illustrated the problem below, and am trying to figure out what to do to make the CRM login environment work as well.
    Thanks.
    Channeld
    Code modification to the CO -->
    String dest_url = "OA.jsp?OAFunc=XXX_ONT_FUNC_129&Header_ID_p="+Header_ID;
    OAUrl oaurl = new OAUrl(dest_url);
    dest_url = oaurl.createURL(pageContext);
    osb.setDestination(dest_url);
    --> what the link shows in on the order page using both logins
    http://pl1ua121.corio.com:8000/OA_HTML/OA.jsp?OAFunc=XXX_ONT_FUNC_129&Header_ID_p=11261&_ti=1811750263&oapc=5&oas=grPSiOwvEyLuXdxKt_a5GA..
    --> what the link gets translated to once clicked within a CRM login session; note, during a regular apps login,
    the link does not get translated.
    http://pl1ua121.corio.com:8000/OA_HTML/RF.jsp?function_id=27070&resp_id=50661&resp_appl_id=672&security_group_id=0&params=08V2jKe4UMpLbUVYUjsT8ZCABTTWpQnO7QdLdJyREFbPg8IIF5.vbStfOY8IYonLVX-dbml9UlrBKO.-rfzhVC2iib.jk6vv-9lnvaN2g5jHG7dKBUwLdgDx0woWFYmOIGTJJxkjHrHfmNMIqDTmxzD8K-jXUU8Vqja8Ajn98ZYtdz6iVvq.yKvS3fbGlxu7vsBw20gV7Yp8gAp9Ps90OUg.5HJh9CD8FhYpiJp4ffQ

    Hi,
    Thanks for the update.
    Sir its not about calling the JSP Page from OAF page.
    My requirement is what I have explained above.
    Please suggest its urgent.
    Thanks,
    Raja Dutta

  • I have Problem in my Iphone 5 when I raise the sound of the speaker noise and the sound not clear

    I have Problem in my Iphone 5 when I raise the sound of the speaker noise and the sound not clear.

    Could you please post in your native language, as your issue is not very clear. Thank you.

  • HT201412 Hi, I have an iPhone 5S went into recovery mode and Restore does not clear up the problem, how to solve?

    Hi, I have an iphone 5s went into recovery mode and reset does not clear up the problem, How to slove?

    imansoheili wrote:
    Hi, I have an iphone 5s went into recovery mode ...
    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Firefox pulls in the wrong website on a particular domain name on my PC but the correct one on my laptop. Deleting the history - cookies, temporary files etc has not cleared the problem.

    I changed the forwarding address to one of my domains a week or so ago. When I go to that website on my laptop (on Firefox) it pulls in the right address. On my PC the old website is the one that Firefox pulls in yet, when I go to Internet Explorer on my PC the correct website is the one that comes up. Apparently this is a problem with the Firefox version on my PC which I believe is the latest as Firefox is an absolute pain in the neck in inundating users with constant demands to update. Very annoying!

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • PI 7.3 - AEX "unable to read configuration data" and login problems

    Hello Friends,
    after installation of AEX, i'm facing some problems.
    1.I'm not able to login with any user, i created during installation wizard. So i cannot check any user in NWA -> User Administration.
    2.Once more, while opening http://<host>:<port>/rep or http://<host>:<port>/dir, i get the following error message.
    Can somebody help me?
    I think, there is a problem with the users, which have been created during installation. How can i check this? Is there any chance?
    Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
    PI (http://<host>:<port>/dir/start/index.jsp). Below is the part of the error message that is showing up. Appreciate your suggestions:
    Exception class: com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed
    Message
    Unable to read configuration data (ExchangeProfile/aii.properties)
    Stacktrace
    Thrown:
    com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed: Unable to read configuration data (ExchangeProfile/aii.properties)
    at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:220)
    at com.sap.aii.utilxi.prop.api.AIIProperties.initServerMode(AIIProperties.java:518)
    at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:97)
    at com.sap.aii.ibdir.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:151)
    at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:43)
    at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
    at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
    at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
    Please let me know if I am not clear.
    Edited by: Clarence on Feb 6, 2012 3:28 PM
    Edited by: Clarence on Feb 6, 2012 3:28 PM

    hi,
    >>>>Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
    if you have java stack only there is no exchange profile anymore...
    https://weblogs.sdn.sap.com/pub/wlg/28334
    Regards,
    Michal Krawczyk

  • Web Center app with ADF Security - login problem

    I have a custome Oracle Web Center app.
    I have a page.html with an embedded login form posting to j_security_check. I've configured the ADF security policies to redirect to a JSPX on successful login.
    When I try the correct username/password, I get redirected not to the page I defined in ADF, but to the root page http://127.0.0.1:7101/MyApp-ViewController-context-root/
    and i get
    Error 403--Forbidden
    I've checked the weblogic.xml as per http://andrejusb.blogspot.com/2009/12/solving-error-403-forbidden-in-adf.html, all the required entries are there.
    This works fine if i use a Login link with
    destination="#{'/adfAuthentication?login=true&amp;end_url=/faces/postLogin.jspx'} "
    which redirects to the default login.html and then to the right page. I've copied the form from the default login.html into my master HTML page.
    Hope my question is clear. Any suggestions why it is going to the wrong URL after login.
    Is there anything specific I should see in the jazn-data.xml or web.xml regarding the post-login URL since i cant see that in either.
    P.S. Have been advised to try here when I originally asked this in the WebCenter forum. Web Center app ADF Security - login problem
    Edited by: new_to_webcenter on 18-Jan-2011 05:25

    Thanks for your response Frank.
    The web.xml has
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>adfAuthentication</web-resource-name>
    <url-pattern>/adfAuthentication</url-pattern>
    </web-resource-collection>
    <auth-constraint>
    <role-name>valid-users</role-name>
    </auth-constraint>
    </security-constraint>
    <login-config>
    <auth-method>FORM</auth-method>
    <form-login-config>
    <form-login-page>/login.html</form-login-page>
    <form-error-page>/error.html</form-error-page>
    </form-login-config>
    </login-config>
    When configuring ADF Security via JDev , I chose "Redirect upon successful authentication" to the Welcome Page
    "/faces/postLogin.jspx"
    this then adds into web.xml
    <servlet>
    <servlet-name>adfAuthentication</servlet-name>
    <servlet-class>oracle.adf.share.security.authentication.AuthenticationServlet</servlet-class>
    <init-param>
    <param-name>success_url</param-name>
    <param-value>/faces/postLogin.jspx</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
    </servlet>
    So the sequence which works is:
    Login via the '/adfAuthentication?login=true&end_url=/faces/postLogin.jspx' and this redirects to login.html (OOTB form which posts to j_security_check) and then to the postLogin.jspx
    I'm trying to do away with a Login link, and trying the simple login form embedded in my page alongwith other content.
    So should the form be posting to j_security_check directly or to the adfAuthentication ?

  • Portal logoff not clearing business objects SSO connection

    Is there a way to clear the saved SSO information from the business objects session in the background?
    The scenerio;
    On a computer shared by multiple users
    UserA Logs on to the SAP Enterprise portal, navigates to an iview that uses OpenDocument to run an xcelsius dashboard.  Single signon works great and dashboard is displayed.  This dashboard resfreshes on open and data retrieved is correct based on this users autorizations in BW.  The user Clicks the logoff link in the masthead of the Enterprise portal, the portal session and its SAP logon ticket are closed and the Portal logon page is redisplayed.
    UserB logs on the the SAP Enterprise portal, navigates to the same iview, the dashboard runs and retireves the data, but the data displayed is based on the BW autorizations for UserA.
    I verified that the SSO connection that userB is using to retrieve data is left over from UserA.  (I did this by simply opening an InfoView window and it shows the userid of UserA in the Welcome message.
    Closing the Browser window between each user login takes care of the problem, but is not really something we can count on our users doing.

    Hi Gail,
    We are also facing same issue as you had, Integrated BI launchpad with Portal and SSO is working fine via portal. But issue is already opened reports or Business objects will not clearing as you had after log off and lo-gin back.
    Can i setup any property to clear the BOBJ cookies or Can i create sap note for logoff option button on BOBJ via portal.
    Can you please suggest me to resolve this issue.
    Thanks,
    Naveen

  • What's causing these power-up and login problems?

    I recently switched from Tiger to Leopard (installed by the repairers) and have encountered some power-up and login problems. Basically, my set up is that the computer automatically logs into a non-admin account, launches a Safari page, and then that's it - after checking the webpage, I logout of that account, into my main account, and work from there.
    In Tiger :
    A few times quite recently the computer would freeze, either while Safari was launching / opening the webpage, or when I tried to logout. Force Quit didn't work (total freeze) so I would force power-off and switch on again, and things would be fine.
    In Leopard, one of the following has begun to happen, about two weeks after I began using it:
    • The computer reaches the grey screen with an endlessly rotating gear wheel. (Power off / on again)
    • The computer logs in to the account; after selecting 'Log out...' I log out, but instead of giving me the login screen, it logs straight back into that account, and this happens every time I try 'Log out...'. (Use Fast User Switching instead to reach main account, where one or two software glitches prompt a Restart) This has happened twice.
    • This morning, the computer reached the blue screen where the pointer appeared - faded - appeared - faded etc endlessly (Power off / on again).
    Clearly it is not the System - experiencing problems in both Tiger and Leopard proves that. Nor is it my HD - I've had a new one installed. It must therefore be a setting in my login account, though it's hard to see what : I only use that account for login, and a single launch of Safari, and it's been ok for years.
    Should i create another login account and see if that solves the problem? By the way, the repairers did not give me any Leopard install disks, so please don't suggest that method of diagnosis. I only have the original Tiger disks.

    christopher rigby1 wrote:
    2. I don't know what Apple app(s) you refer to? As I said I've upgraded all the free ones, and iLife '06 is working (and I have the disks).
    Look in your Applications folder: Any Apple app there, except for the ones you've mentioned. And all the built-in parts of OSX.
    3. They told me that I CAN do a full restore from a Time Machine backup (via Disk Utility apparently).
    That should tell you something about the quality of their advice.
    See: [Mac OS X 10.6 Help Recovering your entire system|http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html].
    Or the *Restoring your entire system from a backup* section, towards the bottom of [Mac 101: Time Machine|http://support.apple.com/kb/HT1427].
    Or look up +*Time Machine+* in Mac Help.
    Or #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    And if there's a problem with your installation of OSX (which seems likely), or the Apple apps, you can't reinstall them, either.
    4. Having spent hours and hours getting the machine to work properly (upgrading Mail and sorting out Mail problems, upgrading Safari, re-upgrading iTunes and sorting out problems), I'm not prepared to spend hours and hours doing the whole thing in reverse to restore Tiger, including learning HOW to do that.
    Correct; unless you have backups of the Tiger system, that's impractical at best.
    So unless anyone has a reasonably simple, straightforward answer as to what this problem might be, it looks like I must live with it.
    You have some sort of problem with your Mac and it's not going to get better on it's own. Most likely, it will get worse.
    If you haven't, try the things recommended by Dale.
    Also try running the +Apple Hardware Test.+ It's on one of the disc(s) that came with your Mac, and is tailored to it's particular hardware. The disk should have +Apple Hardware Test+ and instructions for running it printed in very tiny type.
    I sympathize with your situation, but the repair shop violated the Apple license, and put you in an untenable situation. If they won't correct it by supplying the Leopard disc, you really should report them to Apple.
    You need to purchase a retail copy of Leopard (not the gray discs that came with another Mac; they won't boot yours). They're not shown on the Apple Store website anymore, and eBay and other sellers get a premium for them, but AppleCare should have them for the original $129.

  • CS4 - does not clear session info

    I developed a small membership site for my club.
    Everything works fine so far. I can log in and see the protected pages. I can log out and try and see the protected pages but I then get redirected to the page I specified for failed login.
    This shows me that the login and logout function works.
    The Problem
    The problem is I logged in as me and I log out again. I then logged in as a different user and tried to update the different user's details. But when I went to the update form it still showed MY details in the update form and not those of the user who is currently logged in.
    So it seems to me as if CS4 uses session variables to remember the login details but it was not cleared after the first users logged out.
    Any suggestions on how to fix this?

    pietpetoors wrote:
    The problem is I logged in as me and I log out again. I then logged in as a different user and tried to update the different user's details. But when I went to the update form it still showed MY details in the update form and not those of the user who is currently logged in.
    So it seems to me as if CS4 uses session variables to remember the login details but it was not cleared after the first users logged out.
    The code generated by the Dreamweaver Log Out User server behavior looks like this:
    if ((isset($_GET['doLogout'])) &&($_GET['doLogout']=="true")){
      //to fully log out a visitor we need to clear the session varialbles
      $_SESSION['MM_Username'] = NULL;
      $_SESSION['MM_UserGroup'] = NULL;
      $_SESSION['PrevUrl'] = NULL;
      unset($_SESSION['MM_Username']);
      unset($_SESSION['MM_UserGroup']);
      unset($_SESSION['PrevUrl']);
      $logoutGoTo = "login.php";
      if ($logoutGoTo) {
        header("Location: $logoutGoTo");
        exit;
    As you can see, it's removing only the session variables created by Dreamweaver.
    A more secure way of handling this would be to change the code to this:
    if ((isset($_GET['doLogout'])) &&($_GET['doLogout']=="true")){
      //to fully log out a visitor we need to clear the session varialbles
      $_SESSION = array();
      session_destroy();
      $logoutGoTo = "login.php";
      if ($logoutGoTo) {
        header("Location: $logoutGoTo");
        exit;

  • Sessions/Login Problem

    I have an application that I am working on that allows users
    to take an online assessment. I have a login script that works at
    this point - BUT it is working WAY TOO WELL!
    I have an application file that sets the session.login
    variable to false (using a CFPARAM tag). Once they login, it sets
    that variable to TRUE, and sets some other variables such as user
    id and name and other stuff.
    This is what is happening -
    1. User logs in
    2. User is able to complete survey
    3. User closes the window.
    4. User (or anyone else that uses that computer) can go back
    to a secured page and take another survey.
    What should hapen -
    1. User should NOT be able to go back to the survey once
    taken - I take care of this at the end of the survey by setting a
    session variable and updating the user table. (This is not complete
    yet - and is not the source of the problem - YET)
    2. User should NOT be able to go back to a page once the
    browser is closed - they should definitely have to log back in.
    QUESTION - How can I clear all session variables on window
    close? Is this possible? I thought that closing a window would
    destroy the session data - but apparently not.
    Any advice?

    hi tony,
    I was jus reading the coldfusion documentation on session
    variables and hope this is of use to u...
    If you use ColdFusion session management, ColdFusion
    automatically ends sessions and deletes all Session scope variables
    if the client is inactive for the session time-out period. The
    session does not end when the user closes the browser.
    If you use J2EE session management, ColdFusion MX ends the
    session and deletes all Session scope variables when the user
    closes the browser, or if the client is inactive for the session
    time-out period. If the session times out, however, the browser
    continues to send the same session ID, and ColdFusion will reuse
    this ID for sessions with this browser instance, as long as the
    browser remains active.
    # In many cases, you can effectively end a session by
    clearing the Session scope, as shown in the following line. The
    following list, however, includes important limitations and
    alternatives:
    <cfset StructClear(Session)>
    # Clearing the Session scope does not clear the session ID,
    and future requests from the browser continue to use the same
    session ID until the browser exits. It also does not log the user
    out, even if you use Session scope storage for login information.
    Always use the cflogout tag to log users out.
    # If you use J2EE session management, you can invalidate the
    session, as follows:
    <cfset getPageContext().getSession().invalidate()>
    This line creates a pointer to the servlet page context and
    calls an internal method to reset the session. This clears all
    session information, including the session ID Session scope
    variables, and if you are using session login storage, the login
    information, for future request. However, the session information
    does remain available until the end of the current request. After
    you invalidate a session, attempts by the browser to access the
    application will generate an invalid session exception until the
    session times out.
    Note: You cannot destroy the session and create a session on
    the same request, as creating a new session involves sending
    session cookies back.

  • Yahoo login problem was Verizon DSL now Verizon cellphone

    I'm not even sure where to start.  About February 2009 I started experiencing login issues with my Verizon Browser.  For the Login the options were the Verizon.net account, my regular Yahoo account and Guest.  For years I have always logged in to my regular Yahoo email.  Then the problems started earlier this year where I repeated would get 'wrong password' when attempting to log in my regular Yahoo so I started to have to log in the Verizon.net account and then click over to the regular Yahoo email account (no password required and when security timed out had no issue accepting my password).  Then at the end of April 2009 my hard drive crashed.  I threw my hands up and decided to handle the computer problem when I returned from vacation May 17th. 
    We returned from Europe and I replaced my hard drive, reinstalled my computer programs, but NOT the Verizon Browser.  Haven't a clue if it's a contributing factor to the next problem.  Without the Login box I was no longer forced to log into Verizon.net to get to my regular Yahoo account and I no longer experienced an issue logging into my regular Yahoo email.  However, then I started experiencing login issues on my cellphone.  I have an LG with 'broadband' service and have accessed by Yahoo email account via my cell phone for years.  It also seems that long since I've ever had to enter my username and password, however, suddenly it's required probably 8 out of 10 accesses.  And it doesn't recognize my login many of those times which pretty much renders the cellphone useless since I don't make many calls.  It repeatedly will give me error messages saying my username and/or password are incorrectly (AND THEY ARE NOT!).  Unlike the computer, I cannot login to the Verizon.net email account as it says it has determined I have a Yahoo account and need to log in that way (it also means I can never check my Verizon.net email account via my cellphone).  Often the login problem clears once I access my email via my desktop, but this is not an option when I'm traveling.
    I am totally loss as to where the problem lies.  Don't know if it's an extention of the same type of problem, but on my cell phone about February 2009 I started to have to ALWAYS respond to the security question when accessing my bank via the cellphone.  I always check the box that I use this device to access my accounts and the only time I don't have to respond to one of the questions is if I log back into the bank site within minutes of the original login.

    Please check the following page on Verizon's site:
    Discontinu ed Portal Partnershi p with Verizon in Some Areas
    More info on discontinued portal partnerships can be found on the Email board.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Maybe you are looking for