Login process

Where can I find details about login process of skype client?
I'm using Http proxy (Squid) and I'm not able to login at first attempt, it's need almost 9-10 times first to login goes successfully so to debug this behauviour I'm searching details about what Skype does during login process. What can you suggestme

Hello Filinto Rodrigues,
Do you mean that the system freezes in the startup process?
Please use the Windows 8 startup repair to fix the problems that keep Windows from loading.
For more information about Startup Repair, please take a look at the following article.
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-windows-8-a.html
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please open the event viewer and check if there are any related error log. For more information about the event log, please refer to the following article.
http://windows.microsoft.com/en-us/windows/open-event-viewer#1TC=windows-7
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How does the login process works with a bind to AD?

Hi there,
I am trying to bind our mac to our Active Directory. Before doing I'd like to understand well how the login process works. Is there any reference I could look up to?
For what I've understood until now with an example user "testAccount" and no automount and no AD extension and the ADplugin set as:
a) if mobile is set, then a /Users/testAccount is created and if UNC is set then a smbHome is mounted "on desktop". If UNC is not set, do nothing more
b) if force is set, then a /Users/testAccount is created and if UNC is set then a smbHome is mounted "on desktop". If UNC is not set, do nothing more
c) if force is NOT set:
--c1) if UNC is not set and cannot map NFSHomedirectory at all, then login the user with such a temporary home
--c2) if UNC is set mount SMBhome and use it as mounted home folder (NFSHomeDirectory-->SMBhome "/Network/Servers/my.server.com/users/testAccount")
--c3) if UNC is not set then retrieve the homeDirectory-NIS's attribute in AD (NFSHomeDirectory--> "/homes/testAccount") and create /homes/testAccount
my doubt now is point c2) after I login in with a "#mount" I get:
trigger on /Network/Servers/my.server.com/users (autofs, automounted)
//[email protected]/users on /Network/Servers/my.server.com/users (smbfs, nodev, nosuid, automounted, mounted by testaccount)
but my SMBhome is not correctly mounted on remote server (but the Library folder and MCX files are created!) and I get home errors because the system is looking for "/homes/testAccount", which I don't know where it is coming out from given that a
#dscl /Active\ Directory/my.server.com -read /Users/testaccount |grep homes gives only out dsAttrTypeNative:unixHomeDirectory: /homes/testAccount
thanks,
a.

Is there any reference I could look up to?
http://www.macwindows.com

Modify unbounded task flow for login process

I wonder if I can use the unbounded task flow for login process. I have a login page, a home page and a change password page. As per the requirements, I need to show the login page first, if user password is expired, I need to show change password page, after user save the new password, I show the home page. If user password is not expired, then we go to home page directly.
I have modified the unbound task flow adfc-config.xml. I have created a method call, which references a method in my managed bean to check the redirect page. I have created a router, which would go to change password page or the home page based on different outcomes. But the problem is, every time when I run the application, it always goes to the home page directly, even when the user password is already expired. I have set up break point at the checking redirect page method in my managed bean, looks like it never got called.
Did I miss any steps here? Please advise. Thanks.

A method is not a runnable object in your pageflow - so you can't start from it.
You need to start from a page when your run your project.
One option - convert your flow to be a bounded flow with the method as a default URL and then run it.
See - https://blogs.oracle.com/shay/entry/passing_parameters_to_adf_appl

Error occurred during the login process

Error: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient
Data Provider)

Step 1: Open SQL Server Configuration Manager
Go to Windows 8 Start screen.
Start typing in SQLServerManager11.msc if you are looking for SQL Server 2012 configuration manager. Type in SQLServerManager10.msc if you are looking for SQL Server 2008 configuration manager.
In the result panel you can see the SQLServerConfiguration Manager.
Click the icon to launch the SQL Server Configuration manager.
The configuration manager will open in MMC.
Step 2: Enable following configuration settings
ensure Shared Memory protocol is enabled
ensure Named Pipes protocol is enabled
ensure TCP/IP is enabled, and s ahead of the Named Pipes in the settings
http://dotnetguts.blogspot.com/2014/05/a-connection-was-successfully.html?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+DotnetGuts+%28Asp.net%2C+C%23%2C+.Net+Framework%2C+SQL+Server+Information%29
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

I want to force lan cable plugin during login process on 802.1x computer only weird client

Hi
I Configured Wired and computer only 802.1x authentications on all my switch and client on my network ,It works without any problem .
I have user logon script to change local administrator password each time they log on ,I recently find out they boot with light cd and change the administrator password and unplug the lan cable boot the system and login with new administrator password after
that they plug lan cable , as they computer account is valid in active directory they are authorized and access the LAN .
they bypass some group policy by this way,
how can I force 802.1x wired client computer to plug lan cable during boot and login process in order to prevent bypass user login group policy ?
I want to force lan cable plugin during login process on 802.1x computer only weird client?
Rigards

Hello,
you can disable CD/USB with GPO settings to prevent the use from it.
And for the change from the local admin password you should consider that the CEO of the company should make clear policies so users can legally be punished if they don't work with the company rules.
You can manage lot of settings with scripts etc. BUT there is a time where the CEO is responsible about rules.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Error setting cookie while login process

Dear forum users,
i am getting this error while login into my own application.
Content-type: text/html; charset=ISO-8859-1 Set-Cookie: DHW_COOKIE=EEDD257F53989F57; path=/; Location: f?p=100:1000:155225166267009
I am using a process on submit after computation. This process is before the login process.
10: set Cookie
20: login
This source would setting the cookie before login:
declare
p_text_raw RAW(128);
p_key RAW(128) := utl_raw.cast_to_raw('Key88888');
p_crypto_typ NUMBER := dbms_crypto.des_cbc_pkcs5;
p_encrypted_raw RAW(2048);
p_decrypted_raw RAW(2048);
begin
-- Benutzername und damit den Cookie-Inhalt verschlüsseln
p_text_raw := UTL_I18N.STRING_TO_RAW (lower(:P100_USERNAME), 'AL32UTF8');
p_encrypted_raw := dbms_crypto.encrypt(
src=> p_text_raw,
typ => p_crypto_typ,
key => p_key);
-- Verschlüsseltes Cookie senden
owa_util.mime_header('text/html', FALSE);
owa_cookie.send(
name=>'DHW_COOKIE',
value=>p_encrypted_raw);
owa_util.http_header_close;
exception
when others then null;
end;
Any ideas for this error ?
regards
Frank
Hello community,
any comments ?
Edited by: handwerk.net on Dec 16, 2009 7:31 PM

Here's one more reason why this error occurs in Toad. It is when you have more than one Oracle Client installed on your machine. Even when you select the correct Oracle Home in "Connect Using" field of Toad, you still get this error "Can't initialize OCI. Error -1". So, to solve that you need to go to the installation folder of that Oracle Home (e.g. C:\Oracle\ora92\), then go to the BIN folder. Open Oracle.Key in Notepad and confirm that it is showing Registry entry/path to the correct Oracle Home (e.g. HOME0 or HOME1 or whatever).
I hope this helps.

How do I stop the login process when I open iTunes?

How do I stop the login process when I open iTunes? It often request I login sometimes twice.

I amhaving the same issue of having to log into my apple account wheever I open I-Tunes. In my iTunes sharing my password requirment is unchecked and in filevault it is unchecked also. I have just upgraded to the newest version of iTunes and I still get the pop-up window asking me to login.
Any other thoughts?
thank you

How to change the login process

Hi SDN,
I've set up an Ecommerce 7.0 application with a B2B config. All is running an ok.
I want to change the login process. We have userid's like 000005999999. In the LoginAction, i want to add this zeros before the id automatically so that the user can login with 5999999.
My problem is that i don't find the Action which is performed after login.
The form in the login.jsp looks like this:
(Sorry i couln't post that code normally because SAP means thats cross site scripting. Remove spaces, then i looks normally)
for /user/login there should be a forward at config.xml...but it isn't. No entry at config.xml and no entry at config_user.xml.
Which Action is performed if i press the login button on login.jsp? Can someone help me please?
Where can i change this Action to a Z_Action ?
I think its the LoginAction.java... but where is it called? Where can i change the call to the Z_ class?
For b2c it will be easy to find the LoginAction...there its defined in the config.xml... but at b2b... i really do not understand how that is working. Please help me with that problem.
Thanks and best regards,
Toni
Edited by: Toni Flückiger on Apr 20, 2011 3:45 PM
Edited by: Toni Flückiger on Apr 20, 2011 3:46 PM

In web.xml there is an init-param definition that maps as this:
<init-param>
<param-name>config/user</param-name>
<param-value>/WEB-INF/config_user.xml</param-value>
</init-param>
So, all the forward name s with /user prefix will be checked in the config_user.xml
If you are trying to define a ZAction and would like to add /user prefix to the forward name, then you have to place it in the config_user.xml.
Easwar Ram
http://www.parxlns.com

How does the Login process work?

Hello,
How exactly does the default 'Login' process on the login page work?
When the following code is executed:
wwv_flow_custom_auth_std.login(
P_UNAME => :P1_USERNAME,
P_PASSWORD => :P1_PASSWORD,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':2'
Does the execution continue to the code below or is it halted and the user is redirected to the flow page?
I need to set the username and the user id (from SQL query WHERE username = :P1_USERNAME) ONLY IF the authentication has been successful, otherwise NULL them. What's the best way to do this?
After the wwv_flow_custom_auth_std.login(...), how can I check if the user has been authenticated?
Thanks :)
Pavel

hi pavel--
wwv_flow_custom_auth_std.login sets :APP_USER and then redirects to p_flow_page upon successful login. when you say, "I need to set the username and the user id (from SQL query WHERE username = :P1_USERNAME) *ONLY IF* the authentication has been successful, otherwise NULL them" i'm guessing that you really want your user to not be logged in upon unsuccessful credential verification. if so, that would already be handled by wwv_flow_custom_auth_std. a good way to see this in action is to examine how the Sample Application handles authentication. the login page 101 does call wwv_flow_custom_auth_std with the supplied credentials, but if you don't pass the Authentication Function check specified in the Sample Application's custom authentication scheme, the session is still invalid, and the user is still on page 101. i'm pretty sure that's the behavior you want, but please clarify if not.
thanks,
raj

SQLServer Error: 258, Unable to complete login process due to delay in login response [SQLSTATE 08001]

This is my first time submitting a question to this forum, so if I am in the wrong place please let me know.
I am having a problem with one of my SQL 2008 (10.0.5826) servers. This is a virtual SQL server which has only been in production for the past 3 weeks. It is a very strange problem for me because I never seen anything like this. I am not sure
if this is a potential SQL issue or ISS issue or application issue. I have posted some of the error messages below.
SQL Server Log.
Message
Error: 18056, Severity: 20, State: 23.
SQL Server Agent Log.
Message
[298] SQLServer Error: 258, Unable to complete login process due to delay in login response [SQLSTATE 08001]
Message
[165] ODBC Error: 0, Login timeout expired [SQLSTATE HYT00]
Message
[298] SQLServer Error: 258, Shared Memory Provider: Timeout error [258]. [SQLSTATE 08001]
This is from the windows application log.
Application has encountered an unhandled exception.
Exception:
Type: System.Exception
Source: SII.ServerName.Data
Target: System.String GetConnectionString(SII.ServerName.Data.DatabaseConnection)
Message: Unable to determine database connection.
Stack trace:
at SII.ServerName.Data.DatabaseConnector.GetConnectionString(DatabaseConnection databaseConnection)
at SII.ServerName.Web.Services.WebServices.Global.Application_AuthenticateRequest(Object sender, EventArgs e)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Application has encountered an unhandled exception.
Exception:
Type: System.Exception
Source: SII.ServerName.Data
Target: System.String GetConnectionString(SII.ServerName.Data.DatabaseConnection)
Message: Unable to determine database connection.
Stack trace:
at SII.ServerName.Data.DatabaseConnector.GetConnectionString(DatabaseConnection databaseConnection)
at SII.ServerName.Web.Services.WebServices.Global.Application_AuthenticateRequest(Object sender, EventArgs e)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/18/2014 12:37:54 PM
Event time (UTC): 3/18/2014 4:37:54 PM
Event ID: 74be468c1bcf4606a2d045099d2feb79
Event sequence: 77
Event occurrence: 76
Event detail code: 0

Hello,
Have a look at this connect Item.
https://connect.microsoft.com/SQLServer/feedback/details/468478/sql-server-2008-periodically-does-not-accept-connections
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

User login process after Upgrade from 620 to &7.00

Hi all,
We are on SAP R/3 4.6c, BW 7.0 with BIA 48, SRM 3.0, WAS 620 with ITS supporting portal connections to R/3 and SRM & CUA system which is the issuer of the SSO.
User login to portal with id [it's not sap id used for SAPGUI] and Ldap matches with Employee id and checks with CUA to create the SSO ticket, user can work on R/3 links or SRM links depends on his authorization. R/3 ,BW & SRM having CUA system certificate for SSO.
Communication between Ldap and CUA system is thru ITS and Portal to R/3 & SRM is also thru ITS.
We are planning to upgrade R/3 to Ecc 6.0 and SRM to 7.0, CUA to 7.00 and WAS to 7.00 dual stack systems.
we are thinking Once upgrade is done ,   ITS will be vanished from the environment so the login process will be User login to Portal with ID and Ldap checks with CUA and with the issued ticket user directly communicate wit R/3 and SRM.
Please suggest if we are missing anything on SSO &   the new login process with SSO is right ?
Thanks,
Subhash.G

> We are planning to upgrade R/3 to Ecc 6.0 and SRM to 7.0, CUA to 7.00 and WAS to 7.00 dual stack systems.
Just as an advise: I highly suggest avoiding the installation/upgrade of dual stack instances.
> Please suggest if we are missing anything on SSO &   the new login process with SSO is right ?
Sounds good.
Markus

Login Process & Security of /etc/passwd and /etc/shadow

Guys,
I have few questions, Please help me out.
1. What is the Solaris 8 and Solaris 9 environment's boot files ?
2. While Logging into Solaris Operating Environment , which is file is responsible for Login Process ? Through which file/command the username and password is cross checked with /etc/passwd and /etc/shadow ?
3. We all know that /etc/passwd come with -rw-r--r-- permission and /etc/shadow comes with -r--------. I did a chmod and assigned 000 to both the files. But Still I am able to change the password for the normal user. And as a root I am still able to cat the contents of both the files.
Help me understand these concepts.
Thank you.
Arut

Sounds like you're very new to Solaris:
1. What is the Solaris 8 and Solaris 9 environment's boot files ?/kernel/genunix is the primary boot file. The directory structure in /kernel is also boot related. /usr/kernel is also boot related.
2. While Logging into Solaris Operating Environment , which is file is responsible for Login Process ? Through which file/command the username and password is cross checked with /etc/passwd and /etc/shadow ?Generally three files are related: /etc/passwd, /etc/shadow, and the program /bin/login. Some applications will process /etc/passwd and /etc/shadow on their own and bypass /bin/login - but for you're purposes this is a good general answer.
As a minor example (and if I remember correctly), say someone uses telnet to log into a system. Telnet prompts for the login ID. Once input, it passes forks off /bin/login with the login ID. /bin/login reads the user password information from /etc/shadow and takes the first two bytes from the password field (column 2 using : as field seperator) which is the crypt salt (see crypt man page). /bin/login prompts for the password which the user inputs. /bin/login takes the user input password and the salt value read from /etc/shadow for that user and pushes it through crypt. It then takes the resultant crypt output and compares it against what it read from /etc/shadow - if they matches the user has input the right password. If not, it prompts the user again with a password prompt.
3. We all know that /etc/passwd come with -rw-r--r-- permission and /etc/shadow comes with -r--------. I did a chmod and assigned 000 to both the files. But Still I am able to change the password for the normal user. And as a root I am still able to cat the contents of both the files.To change your password you run the passwd command. That command is SUID root - so for a short period of time you become root within the context of that process. Root is basically god mode and doesn't care about file access priviledges generally. So that fact that /etc/passwd and /etc/shadow have 000 file access permissions doesn't matter - root can still read and write to them.

Unable to complete login process due to delay in opening server connection

Hi Experts !!!
In my client machine , when ever i start SAP application , i need to choose the server and enter UID and PWd.
but it is not getting connected to server , and throws error as
"connection failed :
SQL State : 08001
SQL Server Error : 0
[Microsoft][Sql Native Client]Unable to complete login process due to delay in opening server connection ." *
Any suggestions woould be appreciable
Regards
Krishna Vamsi

Hi, I had similar connections problems at a clients site recently, the following helped me resolve the issue:
SAP provided the following solution as a workaround:
SAP Business One client (not installed on the same machine as the
license service) might take several minutes to log you on successfully due to a delay in establishing a connection with the license server.
After logon, SAP Business One functions as expected.
This is due to the fact that the server or PC on which the license server is installed has more than one network card, or there is a dial-up & VPN interface-configured server.
Note: This can happen when you install the license service on a machine with more than one network card ALREADY installed.
Installing additional network cards on a single network card machine with a license service already installed might not produce this issue.
Other terms
SAP Business One, slow, login, log-in, delay, license, server, NIC, VPN, connection.
Reason and Prerequisites
Application error.
Solution
This issue is a candidate to be resolved in a future release.
Until then, you can use one of the following workarounds:
1.Disable additional network cards in the Network Connections. Also make sure there is no dialup interface or VPN interface set up, and restart the server. Note that you can re-enable the additional network card after the restart. This will resolve the issue until the next restart.
2.Install the license server on a machine with a single network card.
3.Disable all network cards, restart the license server and then enable the network cards again.
Disabling one of the network cards sorted it. This may or may not be the same problem you are facing though.
Regards,
Adrian

My college wifi opens a pop-up in the login process, which my ipad is not allowing. how can i get to allow pop-ups in login process?

My college wifi opens a pop-up in the login process, which my ipad is not allowing. how can i get to allow pop-ups in login process?

You may have pop-ups blocked.
Go to Settings>Safari and turn "Block pop-ups" off. You may needs to restart the ipad after turning off this settings if it doesnt work immediately

Terminal stuck on "login" process

I'll confess I'm a Terminal newbie beyond the most basic tasks, so I've had a rather frustrating time tonight because I've been unable to get past the "login" process when starting a Terminal session.
I've waited about five minutes with no results, and I've tried ctrl-C and ctrl-Q. It's probably a simple fix, but I'm out of ideas.
Thanks!

Maybe this is the same problem I just posted about but do not have an answer yet? Not really trying to login to anything, just never get a prompt?
http://discussions.apple.com/thread.jspa?threadID=1859380&tstart=0

Login Process in EBS

Can anybody explain the process of Login Process in EBS ?
How autentication process happens , which files in COMMON_TOP are refered?
What is the role of APPLSYSPUB and GUEST while login , are both acccounts used for autentication ???

Hi,
Can anybody explain the process of Login Process in EBS ?
How autentication process happens , which files in COMMON_TOP are refered?Have a look at the following link:
Apps 11i login and logout flow
http://oracleappstechnology.blogspot.com/2007/08/apps-11i-login-flow.html
What is the role of APPLSYSPUB and GUEST while login , are both acccounts used for autentication ???This topic was discussed in previous threads, please have a look:
applsyspub
applsyspub
guest account
guest account
Regards,
Hussein

Login process

Similar Messages

Maybe you are looking for