Login scrren appears upon commit in CRM BOL Programing.

Dear Friends,
I have written a report, in order to set the status of Accounts to "Terminate" and end the validity of its relationships and many things in development system(CRD). The report is running perfect in development system and now has been moved to Quality system(CRT) after proper testing. when the report is executed in the quality system on debugging when the statement lr_trax->commit( iv_force_lock = abap_true) is executed a login screen appears of the same system(CRT) for user credentials. but the same is not happening in Development system.
Note: The Re-login is of same system CRT. we are updating the ECC system via Interfaces.
If any of you had faced any such issue like this please help me, as it is very urgent delivery.
Warm Regards,
Ashraf.

Dear Friends,
Thanks, the issue is resolved.
It was the issue from Basis Team.
Thanks again
Ashraf.

Similar Messages

Do you have any document for CRM BOL program

For example how to use class CL_CRM_BOL_CORE and related features, how to use transaction /NGENIL_MODEL_BROWSER
Thanks and best regards,
Blake Le

Hi,
I don't find any details documentation in help.sap.com for BOL program and GenIL.
I found this one in internet:
http://blogs.moovar.com/sap/sap-crm-create-a-custom-bol-for-web-ic/
http://wiki.sdn.sap.com/wiki/display/CRM/CRMUIFrameworkZBOLObjectPart+1
The transaction GENIL_MODEL_BROWSER is only for browsing the GenIL Model.
If you want to use the BOL you can try GENIL_BOL_BROWSER, using this transaction you can browse GenIL Model and you can retrieve also application data from GenIL.
In any CRM system you can find open component "SAMPLE" using GENIL_BOL_BROWSER.
And than you can try to put some break-point in the CL_CRM_BOL_CORE methods or CL_CRM_BOL_ENTITY methods.
And you can see how these two classes are used.
Regards,
Steve

Menu tabs disappear completely after login and appears if only i press on item node at hire level

I'm using a Menu Model to Create a Page Hierarchy in my adf application on Jdeveloper 11.1.2.3.0
it is in three levels level 1 have 2 item nods (home - Help) displayed as buttons
                            level 2   contains 5 item nods about the managements displayed as tabs
                            level 3   is about reports displayed as list
the point I have apply security in the application using Adf security wizard and i assign roles and users and grants
all works fine but level 2 tabs disappear completely after login and appears if only i press on Home item node at run time
I create 2 users (admin) has all roles and can view all tabs in level 2 of my navigation and another user (emp) which can view one Tab page in level 2
Point 1 --the item nod are rendered according the #{securityContext.regionViewable['oracle.view.pageDefs.RentManagPageDef']}     (EL ) expression language
and other item nod render property are set as the same but in the page name definition
it works fine
_ Point 2 in my page template I set #{menuInfo.rendered} for renderd property of the command navigation item
it works fine
- point 3 I add a go link in my template to explicit perform log in log out from the app and redirect the user to the required page
Destination is
#{securityContext.authenticated ? "/adfAuthentication?logout=true&end_url=/faces/wearhouse.jsf" : "/adfAuthentication?success_url=/faces/company.jsf"}
and its also works fine
the problem is in the level 2 navigation tabs which is diaper after explicit log in the app directs the user to the correct page successfully
But the tabs are not rendered till I press on home button on Level 1 navigation it appears and it appears correctly cording the logged in user validation
in another words i log in as user (admin) i get directed to the successful log in page in the link go but level 2 tabs are invisible or not rendered at all    I click on Home button in level1 navigation the tabs
become rendered or viewable and i navigate normally
I log out as admin the level 2 tabs becomes invisible again
then I log in as (emp) i get directed to the successful log in page and level 2 tabs are still invisible or not rendered
I click on Home button in level1 navigation the only one tab the user emp authorized to it gets rendered (appears)
and its semi correct behavior because this is what I want him to see only
my tries to find solution
I tride to use
#{securityContext.userInRole['division']}
on the menu node item   I found same behavior level 2 tabs gets hidden till i click on home link at run time
I tride to use #{securityContext.authenticated} to control item nods rending
all tabs remains visible and i dont want that ain adition if user clicks on a tab of page he has no authority on it i recive server error
I read 30.7 Creating a Login Page in the Fusion Developer's Guide for Oracle Application Development Framework to finde about redirecting user
and it is using the same as i did from adf tutorials
I tried to make new navigation app on fast
maybe i made incorrect change in any stage of my original app
but I found same behavior
I tried to set disabled property instead of rendered property the tabs are always rendered   but I got server error when I click on a tab which a user does not authorized
So I doubt maybe problem in the El or the way I use to control rendering item node
or there additional step to stop all the tabs disappear after login
I hope please some one Help or tell me what i have to read about in the developer guide or interface developer guide or article on the web
I'll be gratfule
I know maybe it is small issue but help me please

Hi,
have a look at the sample that comes with this article: Oracle ADF: Security for Everyone It uses resource remissions to authorize panel tabs.
One test to run is to print the outcome of the security evaluation (e.g. output text) to see what it returns.
Frank

Apple login keeps appearing on my iphone

I currently have an iphone 4S running IOS 6.1.3 software and to my annoyance I keep having the Apple ID login box appearing on my phone asking for my password. Even though I put in my password it will re-appear shortly after asking for my password again. I am now being too loose my patience!! Any help would be greatly appreciated.
Paul

Still no joy even after entering my proper password that login box keeps appearing. Thanks anyway

IMac won't start up: No login window appears.

Hello, there, everyone. The problem I'm addressing here is that my iMac is simply refusing to start up. Two days ago I turned it off (because of irrelevant problems), and since then it just won't boot up completely. Whenever I turn it on, it loads past the blue and white loading screens and the grey Apple logo, but once it loads the default Apple wallpaper it won't go any farther. No login window appears, preventing use. I've tried various alternative ways of booting it up, but nothing seems to work. I've tried safe-booting it (Which really doesn't change anything), initiating the Apple Hardware Test (Which freezes once I choose a language), unpluggung the computer both when it is on and off and retrying the start-up sequence, but still no progress has been made.
My iMac is about four years old, which isn't exactly a short life for a computer, but it still surprises me to encounter such a major problem. If anyone would happen to have any experience with this situation, I would be very greatful for any help at all. Thank you in advance.

Three beeps usually indicates failed or no ram. Try removing and reseating all of the ram. If that doesn't help and you have access to another mac can you start the imac in Target Disk Mode? OS X Mountain Lion: Transfer files between two computers using target disk mode
You'll probably need to take it in for service, but hopefully you aren't about to learn the hard way about backing up.

The GNOME login manager crashes upon booting

Every time I start up Arch, I get a window with a sad face in a computer saying that there was a problem and I have the option to log out which does nothing. The only way I am able to access my desktop is to open another terminal, manually log in, and run "startx." The login manager appeared one time but I have no clue how it happened. This is a fresh install of Arch that I installed yesterday. I am not familiar with troubleshooting so could you tell me what logs to post here? Here is a log file named :0.log which was located in the GDM log folder. This might say something about my issue.
X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.12.5-1-ARCH x86_64
Current Operating System: Linux SERN 3.13.8-1-ARCH #1 SMP PREEMPT Tue Apr 1 12:19:51 CEST 2014 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ae1186fc-165e-4d4d-949a-ccf939e3da53 rw quiet elevator=deadline
Build Date: 09 January 2014 08:47:24AM
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 5 11:55:11 2014
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) The directory "/usr/share/fonts/OTF/" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(--) PCI:*(0:1:0:0) 10de:1187:1462:2847 rev 161, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA GLX Module 334.21 Thu Feb 27 13:54:04 PST 2014
Loading extension GLX
(==) Matched nouveau as autoconfigured driver 0
(==) Matched nvidia as autoconfigured driver 1
(==) Matched nv as autoconfigured driver 2
(==) Matched modesetting as autoconfigured driver 3
(==) Matched fbdev as autoconfigured driver 4
(==) Matched vesa as autoconfigured driver 5
(==) Assigned the driver to the xf86ConfigLayout
(WW) Warning, couldn't open module nouveau
(II) Unloading nouveau
(EE) Failed to load module "nouveau" (module does not exist, 0)
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(WW) Warning, couldn't open module nv
(II) Unloading nv
(EE) Failed to load module "nv" (module does not exist, 0)
(WW) Warning, couldn't open module modesetting
(II) Unloading modesetting
(EE) Failed to load module "modesetting" (module does not exist, 0)
(WW) Warning, couldn't open module fbdev
(II) Unloading fbdev
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 2.3.2
(II) NVIDIA dlloader X Driver 334.21 Thu Feb 27 13:34:35 PST 2014
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) VESA: driver for VESA chipsets: vesa
(++) using VT number 1
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(WW) Unresolved symbol: fbGetGCPrivateKey
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
(EE) NVIDIA: system's kernel log for additional error messages and
(EE) NVIDIA: consult the NVIDIA README for details.
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.1.0
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
(II) VESA(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
(II) VESA(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "1920x1080" (no mode of this name)
(II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name)
(II) VESA(0): Not using built-in mode "1280x800" (no mode of this name)
(II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x400" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x400" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x240" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x200" (no mode of this name)
(WW) VESA(0): No valid modes left. Trying less strict filter...
(II) VESA(0): <default monitor>: Using hsync range of 31.50-48.00 kHz
(II) VESA(0): <default monitor>: Using vrefresh range of 50.00-70.00 Hz
(II) VESA(0): <default monitor>: Using maximum pixel clock of 65.00 MHz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "1920x1080" (hsync out of range)
(II) VESA(0): Not using built-in mode "1280x1024" (hsync out of range)
(II) VESA(0): Not using built-in mode "1280x800" (hsync out of range)
(II) VESA(0): Not using built-in mode "640x400" (hsync out of range)
(II) VESA(0): Not using built-in mode "320x400" (hsync out of range)
(II) VESA(0): Not using built-in mode "320x240" (illegal horizontal timings)
(II) VESA(0): Not using built-in mode "320x200" (illegal horizontal timings)
(--) VESA(0): Virtual size is 1024x768 (pitch 1024)
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(==) VESA(0): DPI set to (96, 96)
(II) VESA(0): Attempting to use 60Hz refresh for mode "1024x768" (118)
(II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
(II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.1.0
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(==) Depth 24 pixmap format is 32 bpp
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): Setting up VESA Mode 0x118 (1024x768)
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store enabled
(==) VESA(0): DPMS enabled
(==) RandR enabled
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 2.8.2
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event2"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) xfree86: Adding drm device (/dev/dri/card0)
(WW) Warning, couldn't open module modesetting
(II) Unloading modesetting
(EE) Failed to load module "modesetting" (module does not exist, 0)
xf86: found device 0
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Audio-Technica ATR USB microphone (/dev/input/event0)
(**) Audio-Technica ATR USB microphone : Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Audio-Technica ATR USB microphone '
(**) Audio-Technica ATR USB microphone : always reports core events
(**) evdev: Audio-Technica ATR USB microphone : Device: "/dev/input/event0"
(--) evdev: Audio-Technica ATR USB microphone : Vendor 0x909 Product 0x1a
(--) evdev: Audio-Technica ATR USB microphone : Found 1 mouse buttons
(--) evdev: Audio-Technica ATR USB microphone : Found absolute axes
(--) evdev: Audio-Technica ATR USB microphone : Found absolute multitouch axes
(II) evdev: Audio-Technica ATR USB microphone : Forcing absolute x/y axes to exist.
(--) evdev: Audio-Technica ATR USB microphone : Found keys
(II) evdev: Audio-Technica ATR USB microphone : Forcing relative x/y axes to exist.
(II) evdev: Audio-Technica ATR USB microphone : Configuring as mouse
(II) evdev: Audio-Technica ATR USB microphone : Configuring as keyboard
(**) evdev: Audio-Technica ATR USB microphone : YAxisMapping: buttons 4 and 5
(**) evdev: Audio-Technica ATR USB microphone : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Audio-Technica ATR USB microphone " (type: KEYBOARD, id 8)
(II) evdev: Audio-Technica ATR USB microphone : initialized for absolute axes.
(**) Audio-Technica ATR USB microphone : (accel) keeping acceleration scheme 1
(**) Audio-Technica ATR USB microphone : (accel) acceleration profile 0
(**) Audio-Technica ATR USB microphone : (accel) acceleration factor: 2.000
(**) Audio-Technica ATR USB microphone : (accel) acceleration threshold: 4
(II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event11)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event10)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event8)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/event12)
(**) Logitech Unifying Device. Wireless PID:1025: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1025'
(**) Logitech Unifying Device. Wireless PID:1025: always reports core events
(**) evdev: Logitech Unifying Device. Wireless PID:1025: Device: "/dev/input/event12"
(--) evdev: Logitech Unifying Device. Wireless PID:1025: Vendor 0x46d Product 0xc52b
(--) evdev: Logitech Unifying Device. Wireless PID:1025: Found 20 mouse buttons
(--) evdev: Logitech Unifying Device. Wireless PID:1025: Found scroll wheel(s)
(--) evdev: Logitech Unifying Device. Wireless PID:1025: Found relative axes
(--) evdev: Logitech Unifying Device. Wireless PID:1025: Found x and y relative axes
(II) evdev: Logitech Unifying Device. Wireless PID:1025: Configuring as mouse
(II) evdev: Logitech Unifying Device. Wireless PID:1025: Adding scrollwheel support
(**) evdev: Logitech Unifying Device. Wireless PID:1025: YAxisMapping: buttons 4 and 5
(**) evdev: Logitech Unifying Device. Wireless PID:1025: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1025" (type: MOUSE, id 9)
(II) evdev: Logitech Unifying Device. Wireless PID:1025: initialized for relative axes.
(**) Logitech Unifying Device. Wireless PID:1025: (accel) keeping acceleration scheme 1
(**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration profile 0
(**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration factor: 2.000
(**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2016 (/dev/input/event13)
(**) Logitech Unifying Device. Wireless PID:2016: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2016'
(**) Logitech Unifying Device. Wireless PID:2016: always reports core events
(**) evdev: Logitech Unifying Device. Wireless PID:2016: Device: "/dev/input/event13"
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Vendor 0x46d Product 0xc52b
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Found 1 mouse buttons
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Found scroll wheel(s)
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Found relative axes
(II) evdev: Logitech Unifying Device. Wireless PID:2016: Forcing relative x/y axes to exist.
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Found absolute axes
(II) evdev: Logitech Unifying Device. Wireless PID:2016: Forcing absolute x/y axes to exist.
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Found keys
(II) evdev: Logitech Unifying Device. Wireless PID:2016: Configuring as mouse
(II) evdev: Logitech Unifying Device. Wireless PID:2016: Configuring as keyboard
(II) evdev: Logitech Unifying Device. Wireless PID:2016: Adding scrollwheel support
(**) evdev: Logitech Unifying Device. Wireless PID:2016: YAxisMapping: buttons 4 and 5
(**) evdev: Logitech Unifying Device. Wireless PID:2016: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2016" (type: KEYBOARD, id 10)
(II) evdev: Logitech Unifying Device. Wireless PID:2016: initialized for relative axes.
(WW) evdev: Logitech Unifying Device. Wireless PID:2016: ignoring absolute axes.
(**) Logitech Unifying Device. Wireless PID:2016: (accel) keeping acceleration scheme 1
(**) Logitech Unifying Device. Wireless PID:2016: (accel) acceleration profile 0
(**) Logitech Unifying Device. Wireless PID:2016: (accel) acceleration factor: 2.000
(**) Logitech Unifying Device. Wireless PID:2016: (accel) acceleration threshold: 4
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
removing GPU device /sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0/drm/card0 /dev/dri/card0
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) xfree86: Adding drm device (/dev/dri/card0)
(WW) Warning, couldn't open module modesetting
(II) Unloading modesetting
(EE) Failed to load module "modesetting" (module does not exist, 0)
xf86: found device 0
(II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event10)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event8)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event11)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
I have Mesa, Vesa, and the "nvidia" drivers installed.
Last edited by kensclark16 (2014-04-05 19:19:25)

Please edit your post and use code tags, like this:
X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.12.5-1-ARCH x86_64
Current Operating System: Linux SERN 3.13.8-1-ARCH #1 SMP PREEMPT Tue Apr 1 12:19:51 CEST 2014 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ae1186fc-165e-4d4d-949a-ccf939e3da53 rw quiet elevator=deadline
Build Date: 09 January 2014 08:47:24AM
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 5 11:55:11 2014
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration...
This makes it A LOT easier to read.

Login prompt appearing when opening Excel Files - SharePoint 2010 SP1 - Office 2007

hi,
i have 2 sites on the same server, 1 at Port 80 and 1 at port 8300
https://contoso.com
https://contoso.com:8300
Both are under same AD and credentials.
But when users on 8300 port site, tries to open office files such as Word or Excel.
In read only mode, login credentials screen comes atleast 3 times again and again, although users are using same and correct credentials
but when clicked as edit mode, then file just opens.
I have saves their credentials locally using credentials vault under user accounts.
while suggestions on this page were already there:
http://sharepoint.licomputersource.com/2011/04/sharepoint-2010-prompts-for-credentials-when-opening-office-documents/
I have added https under Excel trusted File Locations under CA
I have correct AAM mapping under CA.
Please guide how to fix this. Thank you
Server: Sharepoint 2010 SP1
End Users: Office 2007 and Office 2010

Hi,
For Login prompt appearing, please refer to:
http://support.microsoft.com/kb/943280. also, please make sure you have already add this site into trusted sites zone in IE since after this settings, you will not get the read only/edit popup windows. you can change different computers to test
to check if the office settings has some special. in addition, please keep one version of office product.
For he excel files open in browser and then have a option to open in Excel, please go to library settings > advanced settings > Opening Documents in the Browser to check if both sites have the same settings. also, maybe you miss click the open in word/
open in excel button after open in brwser.
Regards,
Seven

SPNego - Login Screen Appears for IE Browser in Some machines.

Hi,
We've done the SPNEGO Implementation for Portal SSO.
All the settings related to KDC in AD server, Portal WAS and IE browser client settings have been done.
In most of the machines with WINDOWS XP SP2, portal login screen is not getting appeared in IE and so SPNEGO is working fine.
But in few machines with WINDOWS XP SP2, portal login screen appears although the IE client setting like adding the portal url in Security Local Intranet, enabling integrated windows authothentication, enabling automatic logon in intranet zone is done.
We have even followed the SAP Note 934138 and installed Microsoft hotfix KB899587, but still some machines with Windows XP SP2 are facing this issue.
Thanks,
Regards,
Aditya Metukul

HI Aditya,
This might be due to proxy settings. Go to your IE -> Tools-> Internet Options -> Connections ->LAN settings -> If you are using Proxy settings then go to Advanced tab -> and add the portal URL under "Do not use Proxy servers for address beninging with".
Regards
Deb
Edited by: Debasish Sarkar on Dec 8, 2008 7:20 PM

Drop Shadow is Causing a Colour Box to Appear Upon Print

I am in the midst of creating a brochure which I am wanting ot use some drop shadows on to create separation between colours.
I have noticed that in the three locations that i've used drop shadows (one is a white square shape, one is on font, and one is on a graphic with a transparent background) there is a light, almost transparent, box that is appearing upon print. This box does not show up in any way on the .pdf, but appears when printed.
Is this an issue with my printer, or am I somehow causing an error with my drop shadow settings?

Sounds like it might be this: InDesignSecrets » Blog Archive » Eliminating YDB (Yucky Discolored Box) Syndrome
Are the background colors spot colors?

Login name appears as full name - how to change to short name?

My user name for login on previous versions of OS X always appeared as the "short name". Since I installed a fresh copy of Snow Leopard, the user name in login boxes appears as my full name instead. How do I make the short name appear instead? (I'm a bit OCD, otherwise I'm sure it really doesn't matter...)

I still don't know whether it's because of the server connection, but I re-installed SL on another Mac on my network - and it did it again. Initially, when I do the install, the account I create shows as Admin. After a couple of reboots, though, it invariably becomes "Admin, Managed" - and the parental controls are turned on.
The fix is easy, as suggested above:
= create a second Admin account,
= log out of the first account,
= log in as the new Admin account,
= remove the Parental Controls checkmark from the first account,
= log out of the new account, and
= log back into the first account.
Irritating to have to do, but the Admin setting seems to stick after this process. You can delete the new account once you have fixed the settings on the real Admin account.
If your issue is a little different than this, you might want to go ahead and start a new thread. Since this one is marked answered, it might get little notice.

Java.lang.NoClassDefFoundError: Login: com/sun/gi/comm/users/client/JMEClie

I am getting this error when i am ruunning my j2me program in eclipse 3.2 >>>>
The default color phone emulator og the j2me disappear after launching...
Can anybody please tell whats the problem?
<Error code>
java.lang.NoClassDefFoundError: Login: com/sun/gi/comm/users/client/JMEClientListenerInterface
at com.sun.midp.midlet.MIDletState.createMIDlet(+14)
at com.sun.midp.midlet.Scheduler.schedule(+52)
at com.sun.midp.main.Main.runLocalClass(+28)
at com.sun.midp.main.Main.main(+116

When i executing J2ME program m getting the error
java.lang.NoClassDefFoundError: com/sun/midp/midlet/MIDletState
Exception in thread "main"
Can anyone plz help in this

Login screen appears - sometimes...

Has anyone had 'issues' with the login security feature on OS X.
I have macbook air 13" ssd and have set the login to appear after 1 hour asleep, for some reason.
I find instant security is difficult to use as I am happy that the machine is 'relaxed' while I say talk on the phone etc.
So, after some sleeps I wake the maching to see the desktop in background but also with a login box.
I can simply cancel the login and I'm back into the machine, but this is not expected.
Also, I have waken the machine after 10hrs one time and found I see the desktop for about 1-2 seconds, then the login feature kicks in, but actually needs a login.
This is all a bit lightweight for a unix secure system - don't you think?

Bump

I use to be able to connect to my shares on my windows 2000 computer via smb. Now the login screen appears but it shakes when I try to login no matter what?

I hav just upgraded from Lion to Mavericks.
Connection to my windows 2000 with smb doesn't work after uppgrading to Mavericks.
The login window appears but shakes as it doesn't recognize my password even if it is correct.
Any solutions?

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

Keep trying to access my Hulu plus Account and it keeps telling me it's not available. It did that yesterday and then the login screen appeared (not sure how it happened) I logged in and it worked. Now today, same unavailable message comes up. Help !!!

Keep trying to access my Hulu plus Account and it keeps telling me it's not available. It did that yesterday and then the login screen appeared (not sure how it happened) I logged in and it worked. Now today, same unavailable message comes up. Help !!!

Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message.

[svn:fx-trunk] 8591: Fix for SDK-18328 - NumericStepper not stripping leading zeroes upon commit .

Revision: 8591
Author:   [email protected]
Date:     2009-07-15 12:39:05 -0700 (Wed, 15 Jul 2009)
Log Message:
Fix for SDK-18328 - NumericStepper not stripping leading zeroes upon commit.
Bugs: SDK-18328
QE Notes: None
Doc Notes: None
Reviewer: Deepa
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18328
    http://bugs.adobe.com/jira/browse/SDK-18328
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/NumericStepper.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/NumericStepper.as

Login scrren appears upon commit in CRM BOL Programing.

Similar Messages

Maybe you are looking for