Login to cisco CME as Administrator failed check your call manager express

Hi Experts
CME and CUE in one router. when i access the CUE from the IE , i put the CUE username and password and i get in. After that it asks me to enter CME username and password to run the wizard. whenever i put the password i get this crappy message "Login to cisco CME as Administrator failed. check your call manager express config" i have cheked my config many times. Please let me know if someone has faced this problem or any suggestion on this. today is the 2nd time i have faced this problem , last time I cud not solve it and end up wasting 6 hours...
please help

Hi friend,
Here is the Prerequisites for Installing Cisco Unity Express Software. As David describes, may be the CME admin account is missing:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_1/installation/guide/prereq31.html#wpmkr1112912
Try this, and let us know.
Best regards,
- AdriÃ¡n.

Similar Messages

Cisco ip phone 7960 cannot connect to call manager express

The 7960 ip phone seems not to connect to the call manager express
router and i have already put the firmware and configured the tftp
server,the rest of the phones the 7911`s are all working ok,i have tried
to reset the phone but it doesnt respond to the # key so as to reset to
factory defaults.
I have tried all the options of resetting it but to no avail.
could someone give me some techie tips on this ? could it be a hardware issue ?? please assist.

Go to the phone and check if the TFTP server is correct (should be the CME IP address). Also check the DHCP address.
Resetting 7900 Series IP Phones to Factory Defaults:
http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a00800941bb.shtml
Check the bug:
CSCed93627: Not able to reset 7970 back to factory defaults

Changing the Compact Flash on Cisco 2821 Call Manager Express

Hello All,
I'm gonna have to swap the compact flash on a Cisco 2821 who is serving as the Call Manager express and the Dialling Router.
What's the best way of approaching this? As far as i know it doesn't have a second slot? And i just can't plug it in and copy everything from 1 flash to another.
Must i copy all of the files on the flash to my tftp or? How can i be sure that everything will be copied to the new flash? I will be creating downtime i suppose? since when i'm copying towards the new flash the router will not properly work with the previous configuration

So i figured out that i can use the archive tar /create command:
To copy the entire flash towards TFTP:
archive tar /create tftp://X.X.X.X/flash.tar flash:
Now i will have to insert the new flash and probably format it first towards the correct file systems. Then i will have to use the next archive command:
archive tar /xtract "Here i am unsure of the syntax, i want to be copying and extracting the tar I backed up from the old flash"
After these steps are complete can i just reboot the router with the new flash card, won't there be any issues, since the startup config is on the NVRAM it will load the config properly, and i haven't seen any boot parameters but they shouldn't pose any issues since i'm not changing the flash slot.
Thanks for your assistance

Starting a Cisco call manager express

I have a cisco 2651 with Cisco call manager express.
I have too 15 IP telephones 7902G
The configuration is in factory default.
Ì have to create an IP pbx and extensions of a municipality with that components.
I's like that anybody helps me in the starting configuration, Where can I find good documentation about a tipical case like this?
I have a lot experience in networking and IP telephony but I'm newbie in CCME.
Regards

To begin the configuration use "telephony-service setup" command which will prompt you for some of the basic configuration ie how many phones, starting DN, etc. To add additional feature refer to the admin guide provided by Jorge link.
Chris

Can't login on my Android phone: "Oops, please check your details".

Hi all, I have created a new plain Skype account yesterday. I works fine on my laptop, where I can sign in without any problems. However, on my Android phone I just get the error message "Oops, please check your details" and Skype keeps showing the login screen. Password and username that I enter are definitely correct. With my old plain Skype account I can login on my Android phone (and laptop) without any problem. I have already force stopped the Skype app, cleared the data, uninstalled and reinstalled it. I have also made sure that I wasn't logged in on my laptop. The only apparent difference seems to be the hyphen (minus sign) in my new Skype name. Might this cause the problem? My setting:Alcatel One Touch 997d w/ stock Android 4.0.4 & WiFi (home network), Skype v3.0.0.6181 Thanks very much for your help,
Dom

Oh, I have to update my story. I spoke too soon in my earlier post . Only after about a few days, or something like a week, the error came back again. And I'm QUITE certain that after changing the password, it would work again! (again.) And yes it makes me think special charcaters are not really the problem, but that 'whatever' the problem is, resetting your password seems to provide TEMPORARY relief! I haven't bothered to update my password since this second failure, because of the hassle of updating it on more than 3 devices I own. I have been missing out, no skype on my android phone. This i a real bug. there hasn't been an android updates for months (more than a year? I don't know), why aren't devs acknowledging and looking into this?...

Cisco call manager express : desactivate silencious mode in Ip telephony

Hello All,
I configured cisco call manager and it works well. I would like now not to allow users to make their phone in silencious mode by using down volum. May I do it with cisco commands lines? Thanks in advance for any help.
PS : I have a Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.2(3)T1, REL
EASE SOFTWARE (fc1)
Regards.

Hi Carl Messer ,
just one doubt, in fast track method can we give any phone model with any protocol(sccp,sip) type as a reference?
for example for 8831 sip phone reference phone type given is 7937 which is a SCCP phone so my doubt if i gave 7975 sccp will it work?
from above thread:
voice register pool-type 8831
xml-config maxNumCalls 2
xml-config busyTrigger 1
xml-config custom sshAccess 0
num-lines 2
description Cisco IP Phone 8831
reference-pooltype 7937
voice register pool 1
busy-trigger-per-button 1
id mac ####.####.####
type 8831
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
description 233
codec g711ulaw
no vad
Rgds
Vigeesh

ITunes 8 not running? Check your Task Manager and it probably is!!!

Click CtrlAltDelete and check to see if iTunes8 is running. Whats that all about?

Got the same problem. When I click the itunes icon,the hour glass shows for about 20sec, then does off and nothing. I have checked the task manager and it does not show its running. When I come to log off the computer, I get the little window to wait or end the itunes application. I have uninstalled and reinstalled a zillon times and it still will not run. Can anyone help please?

Call Manager EXPRESS + WAAS on Cisco 2851

Hello,
Someone can tell me if the solution with CCME + WAE can work together on Cisco2851?
When im using the Cisco Dynamic configuration tool, the tool says that IOS of CCME is incompatible with WAE.
I need to know if Cisco2851 can support both.

Hi,
The required IOS for WAE is IP BASE only.
But, when you are using some kind of (voice IOS) in other words (CCME), the tool says that IOS is incompatible with the WAE.
P.S - the same configuration works on Cisco3825 or Cisco3845

Cisco Call Manager Express voicemail day & Night option

Hi,
anyone know how to setup a automatic night option for voicemail.
basically, at 5.30pm all incoming calls go to voicemail (a general delivery voicemail that is) without using any auto attendant?

Hi
You could set up a night service so that calls would CallFWD to voicemail after a certain time?
Details below:
night-service day Sun 12:00 07:59
night-service day Mon 17:00 07:59
night-service day Tue 17:00 07:59
night-service day Wed 17:00 07:59
night-service day Thu 17:00 07:59
night-service day Fri 17:00 12:00
night-service day Sat 12:00 12:00
ephone-dn 1 dual-line
number XXXX
pickup-group X
label Joe Bloggs
description Joe's phone
name Joe Bloggs
call-forward busy 1111
call-forward night-service 1111
call-forward noan 1111 timeout 17
huntstop channel
night-service bell
More info here..
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_n1ht.html#wp1015444
Please rate useful posts...

Does CME (Call manager Express) support a server based TAPI environment?

Thanks in advance if you can provide the document link to confirm this function.

Hi James,
Hope this link answers your question:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/tapi/developer/guide/tapidev.html
Kindly rate the post accordingly.
Regards,
Kevin Monteiro

Cisco Unified OS Administration Login

I am wondering if it is possible to change how to login to Cisco Unified OS Administration and Disaster Recovery System via the Web front end of Call Manager 6.1.3. Currently you need to login as Administrator to those 2 Web pages, but for Cisco Unified CM Administration, Serviceability, and Reporting you do not. I can login with my Call Manager account. It would be a lot easier if my and the other administrator could just use are Call Manager login for those 2 pages instead of the Administrator account. Is this possible?

No, OS admin and DRS systems are separate from Admin pages.
You need to authenticate to each one because of what privileges each one provides within the system and at which level they're.
HTH
java
if this helps, please rate

Nortel VS Cisco CME

I have a client who liked Cisco initially but now likes Nortel IP-PBX.
I dont know much about Nortel to compare it to Cisco's CME.
Can anyone please provide me some links or information on why Cisco CME solution is better than Nortel's Hybrid solution.
Thanks
AD

What about applications? Is Nortel BCM Proprietary? Does it allow thir party integration for Phone applications?
Our main concerns are:
1. Management of the system.
2. Reliability.
3. Need for third party application integration.
4. What is the value of BCM vs CME?
Our company has 120 phones at the moment. But that number will increase to 180 in next 2 years. We may not reach 240 in next 5-7 years. So we are condidering call Manager express solution. Initially we were looking at Call Manager solution but got some bad feedback about the CCM. Is CCM 5.0 reliable?
What does CCM provide that CME does'nt ?
We will be adding 15 warehouse locations in the future. But each location will have 2 users. There will be 2 Analog lines for these locations and may be use Softphone through VPN tunnel. We do not have point to point T-1's for remote locations. Just a Internet T-1 for VPN tunnel to main location.
Thanks for your help
AD

Urgent cisco cme caller-id

Hi,
i`m using a cisco call manager express with about 40 users using cisco ip phones 7931,7940....etc
when outside call ( eg.from my mobile or pstn) dial into the company and the 333(receptionist) phone rings - it is written from unknown number even after i add the command caller-id enable.
when i plugged the phone cable into a digital phone directly and make a call to this phone it works- caller-id has been showed.
how can i make the caller-id the outside caller appear on the cisco ip phone??
thanks

Hi
The provider may be providing caller id after couple of rings. When you enable caller-id, there are few options available. Try those.
By default, CME will expect the caller id after 1 ring. Also, make sure you configure "no battery-reversal" on the port. Some times, this causes the call to initiate again.
Let me know how it goes.
Thanks
- abu

Cisco Call Manager License

Can anyone please tell me if Cisco CME Voice Recording licences need to be annually updated?
Also Call Manager Express licences cover the users indefinitely?

Hi Manthan,
Cisco Unified CME Permanent License
When you purchase a Cisco Unified CME permanent license, the permanent license is installed on the device when the product is shipped to you. A permanent license never expires and you will gain access to that particular feature set for the lifetime of the device across all IOS release. If you purchase a permanent license for Cisco Unified CME , you do not have to go through the Evaluation Right to Use and Right To Use (RTU) licensing processes for using the features. If you want to purchase a CME-SRST license for your existing device, you have to go through the RTU licensing process for using the features. There is no change in the existing process for purchasing the license.
The Cisco Unified CME permanent license is available in the form of an XML cme-locked3 file. You should get the XML file and load it in the flash memory of the device. To install the permanent license from the command prompt, use the license install flash0:cme-locked3 command. The cme-locked3 is the xml file of the license.
Collaboration Professional Suite License
Collaboration Professional is a new suite of licenses. The Collaboration Professional Suite can be purchased either as a permanent license or an RTU license.
Collaboration Professional Suite Permanent License —When you purchase the Collaboration Professional Suite license, by default, the Cisco Unified CME licenses are delivered as part of the Collaboration Professional Suite. You do not have to separately install and activate the Cisco Unified CME license. The Collaboration Professional Suite permanent license is available in the form of an XML file. You should get the XML file and load it in the flash memory of the device. To install the permanent license from the command prompt, use the license install flash:lic_name command.
Collaboration Professional Suite RTU License—When you purchase the Collaboration Professional Suite RTU license, you do not have to go through the Evaluation Right to Use process. However, you have to go through the RTU licensing process for using the Cisco Unified CME features. To install the Collaboration Professional Suite RTU license from the command prompt, use the license install flash0:colla_pro command. To activate the license, use the license boot module c2951 technology-package collabProSuitek9 command.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeover.html#wp2286954
HTH
Manish

Cisco call manager version

hello,
how can i know the version of cisco call manager of my system UC520? thanks

Again as mentioned in other threads: thatis Call manager Express.
Not Call manger.
To check, you do "show telephony".

Login to cisco CME as Administrator failed check your call manager express

Similar Messages

Maybe you are looking for