Login to Infoview / cmc is slow

Hi all!!
I'm using a BOE XI 3.1 SP2 with Apache Tomcat Was, in a Windows 2008 VMware image...
Login times  to InfoView and CmcApp with entreprise authentification are about 2 minutes or more than sometimes.
And after login,some page take time ,for example adding a new user ..
When we restart Tomcat 5.5 the login is fast but after few minutes the issue back.
Has anyone experienced this problem ?

Hi Thibault,
I haven't seen delays quite that long, but I have seen this take quite a bit longer the first time you access the sections or applications.  Usually, this delay is in extracting the contents of the WAR files into the WebApps folder and/or compiling the JSPs for consumption.  In your case though, if it is quick and then slows down after some use, I would look at resources on the box.  Ensure that you have set the -Xmx and -Xms switching on the Tomcat server to 1024 to allow for up to 1gb of RAM, also, enable a debug trace and see if you can locate, from the logs, what the delay is.
Other than that, can you give us a little more detail on the environment?  It might be worth it to open up a support message and have an engineer look into this with you.
Thanks
Jonathan

Similar Messages

  • Error while login to infoview

    Hi,
    I m getting error while login to Infoview
    u201CAn error has occurred: recv() failed:I/O error during read:java.net.SocketException: No buffer space available (maximum connections reached?): recv failedu201D
    CMC is working fine.
    We have tried restarting Tomcat.
    Checked the available space on the installation directory as well on C drive, there was enough space.
    Checked the temp directory of the user who installed Business Objects.
    Checked the virtual memory size on the system, increased the Heap size to 1024.
    Please suggest how to proceed further.
    Thanks,
    Anisa

    Hi Anisa,
    The above error was caused in windows  If you try to set up TCP connections from ports that are greater than 5000, Try the below solution
    Start Registry Editor.
    Locate the following subkey in the registry, and then click Parameters:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
    On the Edit menu, click New, and then add the following registry entry:
    Value Name: MaxUserPort
    Value Type: DWORD
    Value data: 65534
    Valid Range: 5000-65534 (decimal)
    Default: 0x1388 (5000 decimal)
    Description: This parameter controls the maximum port number that is used when a program requests any available user port from the system. Typically , ephemeral (short-lived) ports are allocated between the values of 1024 and 5000 inclusive.
    Exit Registry Editor, and then restart the computer.
    Hope this helps,
    Regards,
    Santhi Bushan

  • FireFox browser does not show toolbar when login to infoview

    Hi,
    I am using Business Objects Enterprise XI release 2 with SP 4. When i login to infoview using FireFox I can not see the toolbars and menus needed to create a New Webi report or any other reports.
    Has anyone know how to fix this? I tried the following patches , but it did not fix the issue.
    ADAPT01081436
    Description:
    In a Firefox browser, when creating a multiple-pane outline of a Web Intelligence report in "My InfoView", an error message
    appears.
    New Behavior:
    This problem is resolved.
    Also, I have found below issues from boxir2_en_ServicePack4_readme.pdf document:
    ADAPT00861711
    Description:
    You cannot launch a web in a Mozilla Firefox browser from a dashboard customized help URL.
    Page 52 of 130
    New Behavior:
    The exception handlers now catch errors thrown by Mozilla Firefox.
    The error message i see in the Error console is this
    toolbarContainer has no properties
    menuNew has no properties etc
    Regards
    ambili

    Firefox 2 version 2.0.0.20. and the JRE version that is installed on the machine is 1.6.0_30.
    I tried the same with FireFox version 3.0.5 and  get the same issue. I did not try to open any reports. But in the infoview first page, i can not see the tool bar from where you create a new report. 
    The error message i mentioned in the message is actually seen in the Error console from  Tools -> Error Console from the browser
    regards

  • Configure BOBJ (INFOVIEW & CMC) in FIREFOX

    HI ALL,
            can any one suggest us to Configure the Business objects xi3.1 (Infoview & CmcApp browser) settings in Firefox .
    Details
    OS - Hp UX B 11.31
    BO server -XI 3.1 SP2 FP 2.8
    Webserver-Tomcat
    Database -Oracle 10g
    2CPU info:
    2 Intel Itanium 2 9100 series processors (1.67 GHz, 18 MB)
    666 MT/s bus, CPU version A1
    8 logical processors (4 per socket)
    Memory: 16353 MB (15.97 GB)
    Thanks & Regards
    Naveen Kumar Challa
    09167165285

    Are you getting any error after trying to open Infoview/Cmc URL's??
    Does it working on IE??
    Which version of firefox?
    Firefox/2.0.0.14 seems fine. See in supported platfroms as well.
    I'm Back

  • Can't view a report connecting through ODBC(RDO)  to DB with InfoView (CMC)

    Environment :
    Crystal Reports machine :
    OS :
    Windows Server 2008 64-bit
    Crystal Reports Developer 2008 SP0
    Crystal Reports Server 2008
    DB Server:
    Windows Server 2003 32-bit
    SQL Server 2000 SP3
    What is going on:
    All the reports connecting through ODBC (RDO) to the database server work fine in the developer interface (I can preview them) but cannot be accessed if I try to view them in InfoView / CMC ("Please wait while the document is being processed" message box doesn't go away...).
    I have tried both the SQL Server driver 6.00.6001.1800 and SQL Server Native Client 10.0 2007.100.1600.22 with the same results.
    PS All the reports using OLE DB work just fine, I would prefer to have the ODBC option working through the web interface because I have a few hundreds report to change otherwise ...
    Virgil Rucsandescu

    Our solution is a php web application, but this is not relevant (in my opinion), and here it is why:
    The php code should show the reports by using the direct links given by InfoView
    (like http://dev-web:8080/CrystalReports/viewrpt.cwr?id=801&apsuser=user&apspassword=password).
    Actually in this moment these links are looking different because currently we're using C.R. 10 + C.R. Server 10, but we are planning to move to CR 2008 + CR Server 2008.
    So now I am testing how these direct links do work, they're actually working perfectly till now, but only if I connect through OLEDB to the DB server (SQL Server 2000). Any attempt to do it through the 2 ODBC drivers failed until now.
    And I don't want to think about changing the data source hundreds of reports (lot of them having subreports too) ...

  • Crystal Reports Server 2008 FP 4.1 Update did not update InfoView/Cmc ?

    Hi all,
    last year I installed a Crystal Reports Server 2008. After installation I had the following version numbers:
    Server = 12.3.0
    InfoView/Cmc = 12.1.0
    Now I downloaded all packages of service pack 4 and fix pack 4.1 and tried to install them in following order:
    Crystal Reports Server 2008 V1 Service Pack 4 for Server Components
    Crystal Reports Server 2008 V1 Service Pack 4 for Client Components
    Crystal Reports Server 2008 V1 Fix Pack 4.1 for Server Components
    Crystal Reports Server 2008 V1 Fix Pack 4.1 for Client Components
    The installation of the server components worked fine, however the installation of the client components failed with "Base version mismatch". Now I have these version numbers:
    Server = 12.4.1
    InfoView/Cmc = 12.1.0
    Is that the intended behaviour? Is there no need to update InfoView/Cmc too? I know that InfoView did not work with IE 9 before the update, so I hoped to get an update of it.
    Thanks for any info
    Joern

    Hi Joern,
    Don't pay attention to the version that you get from infoview or CMC.
    It never changes and will always remain 12.1.0
    In order to know your BOE version, you can check it in
    CMC > Settings
    In the add/remove programs, it lists the version installed
    You also have a tool which is software inventory tool which list the version installed.
    For clients, if you go in the folder where the .exe is, if you right click on it and select properties then you will get the version number in the version tab
    I hope this will help you
    Regards,
    Philippe

  • Issue with LDAP login authentication in CMC console

    We have a existing issues with Business Objects BOE XIR2 SP2 and LDAP authentication with the BOE CMC Console.
    We use websphere as the application server and it is installed on the same machine (Solaris) as BOE.
    We have this issue on both our production and our recently rebuilt development environment to duplicate the issue.
    Both environment have configured LDAP over SSL and we can login to BOE Infoview Reports with LDAP and we can map groups and users if we login to CMC but we can not login to CMC with secLDAP.
    The specific error still being shown is "Security plugin error: Failed to set parameters on plugin".
    Both environments (DEV and PROD) are fresh installs of BOE XIR2 SP2.
    Any ideas are much appreciated
    Thankyou

    The CMC in XIR2 used com components for the SSL (rather than java like infoview) and I'm betting the WAS deployment is not finding them. Is WAS on a seperate server or is BOE installed there as well?
    I'm not familiar with any regular fixes for an issue like this. If no other replies I'd recommend opening a case with either deployment(WAS on "nix") or authentication(WAS on windows) to see if they can trace down the problem.
    Regards,
    Tim

  • Problems Login to the CMC as administrator

    Hi
    Everyday first attempt to login to CMC fails with following error. However immediate attempt works fine. Then rest of the day I can login without any problems. Next day same story! Can someone tell me why this happens and how to resolve this.
    "Unable to connect to cluster @<Server Name>.COM to retrieve updated CMS member list. Logon cannot continue. "
    Thanks

    Hi David
    thanks for the prompt reply.
    Is there any problem if I get my administrator to not restart this server/service every night (if that is possible)?
    You mentioned I need to use real CMS name, can you elaborate?
    This is our new installation and we are still learning.
    Its interesting you provided solution for both CMC and Infoview, however I just noticed that for Infoview I don't have any problem logging in first time.
    Why would that be?
    Thanks

  • Login to infoview directly to the home page

    Hi
    I am triying  to create a jsp script that will aloow to enter to the infoview without entering the log in page
    but the page that comming up is the log in page with an error  message  "your session is not valid or has expired"
    did any one solved this issue?
    here is the script:
    <%@ page contentType="text/html; charset=utf-8" %>
    <%@ page import="com.crystaldecisions.sdk.exception.SDKException" %>
    <%@ page import="com.crystaldecisions.sdk.framework.CrystalEnterprise" %>
    <%@ page import="com.crystaldecisions.sdk.framework.IEnterpriseSession" %>
    <%@ page import="com.crystaldecisions.sdk.framework.ISessionMgr" %>
    <%@ page import="com.crystaldecisions.sdk.occa.infostore.IInfoStore" %>
    <%@ page import="java.io., java.net., javax.servlet., java.util."%>
    <%
    String authMethod = "secEnterprise";
    /* Log on using the Enterprise SDK */
    String userID = request.getParameter("user");
    String userPwd = request.getParameter("password");
    String cmsName = request.getServerName()+":6400" /=request.getParameter("cms")/;
    try {
    IEnterpriseSession enterpriseSession = CrystalEnterprise.getSessionMgr().logon(userID, userPwd, cmsName, authMethod);
    session.setAttribute("EnterpriseSession", enterpriseSession);
    IInfoStore iStore = (IInfoStore)enterpriseSession.getService("InfoStore");
    session.setAttribute("InfoStore", iStore);
    String logonToken = enterpriseSession.getLogonTokenMgr().getDefaultToken()/createlogontoken/;
    String openDocURL="http://" + request.getServerName() ":8080/InfoViewApp/listing/main.do?token="logonToken;
    response.sendRedirect(openDocURL);
    } catch(Exception e) {
    out.println("Error: User, Password or CMS name is wrong or Not all parameters sent by URL");
    %>
    Thanks

    Hi,
    I have the same requirement where I need to check BO InfoView login.
    Could you please let me know how did you ran the jsp code. I tried to run to but its giving me error. I used the same code provided by you and replaced the URL and Login Token as mentioned by you.
    Error:
    org.apache.jasper.JasperException: Unable to compile class for JSP
    Generated servlet error:
    Only a type can be imported. com.crystaldecisions.sdk.exception.SDKException resolves to a package
    Generated servlet error:
    Only a type can be imported. com.crystaldecisions.sdk.framework.CrystalEnterprise resolves to a package
    Generated servlet error:
    Only a type can be imported. com.crystaldecisions.sdk.framework.IEnterpriseSession resolves to a package
    Generated servlet error:
    Only a type can be imported. com.crystaldecisions.sdk.framework.ISessionMgr resolves to a package
    Generated servlet error:
    Only a type can be imported. com.crystaldecisions.sdk.occa.infostore.IInfoStore resolves to a package
    An error occurred at line: 8 in the jsp file: /new.jsp
    Generated servlet error:
    IEnterpriseSession cannot be resolved to a type
    An error occurred at line: 8 in the jsp file: /new.jsp
    Generated servlet error:
    CrystalEnterprise cannot be resolved
    An error occurred at line: 8 in the jsp file: /new.jsp
    Generated servlet error:
    IInfoStore cannot be resolved to a type
    An error occurred at line: 8 in the jsp file: /new.jsp
    Generated servlet error:
    IInfoStore cannot be resolved to a type
    org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:512)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    Please let me know how to do this.
    Thanks,
    Nikhil

  • Error when trying to login to InfoView using SAP credentials

    I am working on connecting a Business Objects system with a SAP BW system. I have installed the "Integration Kit for SAP", but when I try to log into InfoView using Authentication = SAP and my SAP credentials, I get the following error:
    Failed while trying to obtain the connection provider object for system AD4CLNT100. Unknown entitlement system: AD4CLNT100. Logon cannot proceed.
    I tested with a dummy user/pw and I got the same error, which indicates that my SAP user is not recognized by BusinessObjects.
    I checked the CMC, and correct the SAP users does not appear (I suppose this should be the case if the users was correctly syncronized?)
    My question is, is my suspicion correct, is it the integration of users which has failed? If so, what can I do to fix it?
    Thank you in advance.

    Hi Ingo,
    I ollowed the section "Creating a user account for BusinessObjects Enterprise" when setting up the user and double checked the settings. If the settings are right is that what is required? Or do I need to aply other authorizations? (I am trying to narrow down the possible reasons for not getting more roles).
    I have a huge number of roles in SAP which all have users assigned (not directly but nested via profiles etc. but I guess that is okay). None of these are shown in the list of groups.
    I have copied the Profile of the user "crystal" which I created according to the Installation and Administrators Guide, it looks as follows:
    Profile                                                                               
    +  T-A4340001   <PRO> Profile for role CRYSTAL_ENTITLEMENT                                                                               
    +  S_DATASET  <OBJ> Authorization for file access                                                                               
    +  T-A434000100 <AUT> Authorization for file access                                                                               
    +  ACTVT      <FLD> Activity                                                                               
    33                                                                               
    34                                                                               
    +  FILENAME   <FLD> Physical file name                                                                               
    +  PROGRAM    <FLD> Program Name with Search Help                                                                               
    +  S_RFC      <OBJ> Authorization Check for RFC Access                                                                               
    +  T-A434000100 <AUT> Authorization Check for RFC Access                                                                               
    +  ACTVT      <FLD> Activity                                                                               
    16                                                                               
    +  RFC_NAME   <FLD> Name of RFC to be protected                                                                               
    /CRYSTAL/SECURITY                                                                               
    BDCH                                                                               
    PRGN_J2EE                                                                               
    STPA                                                                               
    SUNI                                                                               
    SUSO                                                                               
    SUUS                                                                               
    SU_USER                                                                               
    SYST                                                                               
    +  RFC_TYPE   <FLD> Type of RFC object to be protected                                                                               
    FUGR                                                                               
    +  S_USER_GRP <OBJ> User Master Maintenance: User Groups                                                                               
    +  T-A434000100 <AUT> User Master Maintenance: User Groups                                                                               
    +  ACTVT      <FLD> Activity                                                                               
    01                                                                               
    03                                                                               
    +  CLASS      <FLD> User group in user master maintenance                                                                               
    Thank you in advance
    Rasmus

  • How to kill/stop a report from InfoView/CMC ?

    Hi All,
    I have CRS2008 v1 environment running reports against Sybase database. Users run reports from Infoview. I would like to know what the best way to kill or stop a report that has been triggered from Infoview? Kill the spid from sybase or is there a way to kill it from Crystal?
    Thanks
    Ajith

    I want to kill reports run by users if they affect the system performance due to large volume. In that case the stored procedure that the report uses to select data might run for longer periods and I want to able to kill that process. So the question is which is better ?
    1. Kill the spid for that report stored procedure in Sybase
    2. Stop/delete the report instance from crystal if it is possible.

  • Running reports in CMC is Slow (the first time)

    when we first log into CMC - the report takes 10 minutes or more to run.
    when you run it subsequent times - it takes less than 15 seconds...
    what could be causing this unbearable delay the first time?
    I've seen some people say that you should build a blank report that users can run first - that is not a solution....
    Has anyone had a similar experience?

    Check the same query on DB, notice how much it takes to run.
    What might be happening here is, first time when it ran, that may be normal time it takes to run the report. After that, WEBI processing server (assuming you are running WEBI report) keep it in cache, so next time when it runs for the same data, it takes it from the cache, instead of querying the DB again. That is the reason, you see the results quickly.

  • Satelltie L855-s5155 freeze at login screen or was extremely slow - now need windows 8or 8.1

        I purchased this laptop about a year and half ago.  I have used it a total of 5 times.  It mainly remains in the laptop back int he closet. 
    Model L855-S5155
    Serial Number: XXXXXXXXX
        I turned it on last week and it booted up to the login screen.  I typed my password in and nothing happened.  The cursor was flashing in the password field but when I typed my password, the cursor moved two spaces and remained there for a couple of hours at which time I had to turn it off by holding the power button for 5 seconds.  I repeated this process several times.  At one time it took my password and the dots started going in circles to I guess load the live tiles.  I left that go for about 4 hours at which time I turned it off again.
        Upon turning it on I did get an error message on a bably blue screen that stated 'Windows was not shutdown properly' and it restarted.  At the Toshiba splash screen the dots going in a circle showing that something was loading so I left that go for about 6 hours while it remained still at that screen. 
        At one point I had gotten the maintenance screen upon boot up so I tried a system restore.  That didn't work.  Same issues.  Unfortunatley I hadn't made a restore / recovery disk which I guess being Toshiba that should have been my first task.   As I reviewed the boards I found that the system never shuts down and at the current situation I was in not being able to login to Windows I had to resort to removing the battery for a minute and restarting the laptop to get to certain areas. 
        I attmepted to reset the PC from the maintenance screen in hopes that would fix the problem.  I had upgraded from windows 8 to 8.1, but it was working after the upgrade so I didn't worry about it.  Unfortunatley that didn't work.  When it restarted it remained on the Toshiba slpash screen for 10 hours with the dots going around in a circle.  Knowing some processes take a little time, I have been leaving the laptop on for a while to make sure certain processes have time to finish but 10 hours to me might have been too long after a recovery.   Everytime I turn on the laptop the Toshibal splash screen would come up and the dots would go around in circles.  I left it go over night  one night to see if there was some process that needs longer to run, but no. 
        Being that I purchased my laptop with windows 8, I would like to have windows 8 on it.  Unfortunately I need to laptop for a project so I decided maybe I should put windows 7 on the computer just to get t running so upon restarting the laptop and getting the BIOS screen there was screen that came up that would delete all partitions.  I guess and HDD Recovery. Now that I have run that of course I have, what I think, may be a clean hard disk to start from.
        Something I did notice when I began to install windows 7 is that my 750 gb hard drive only shows 698 gb of free space.  Being that there aren't any disk maintenance tools to let me know if there are bad sectors due to a possibly bad hard disk or is the windows 8 image still hiding on there.  Doubtful if the partitions were removed.
        Can anyone tell me what happened?  Is there anyway to get windows 8 back onto the laptop without buying it again? Any assistance would be greatfully accepted.
    [Moderator edit to remove serial number.]

    Satellite L855-S5155
    If no recovery media was created, you can obtain it from Toshiba. Scroll down to Get Recovery Media here.
    For instructions, see the section Restoring from recovery media, which begins on p. 57 of the User's Guide.
       Satellite/Satellite Pro C800/L800/S800 Series User’s Guide
    When you upgrade to Windows 8.1, be sure to follow these instructions.
       How to Update from Windows 8 to Windows 8.1
    -Jerry

  • I was unable to login in the CMC The error states

    Account information not recognized: Could not reach CMS 'WIN-V8R8YXLSTKO:6400'. The CMS on machine 'WIN-V8R8YXLSTKO' was stopped due to a critical error. (FWM 20031)

    Please provide more information such as since when has the issue been observed.
    The below information would help a lot for everyone:
    1. ServerOS version:
    2. CMS Db version:
    3. CMS drivers version:
    4. BO version:
    5. Is this a new installation? If not, what are the changes done  at OS / CMS Db level.
    The CMS is in stopped state, so first check whether we have any issues with the ports / firewalls / antivirus which might stop this to start up. Telnet to the port would help.
    Look into the event viewer logs in windows which might provide some insights. In unix servers look into the syslog file (etc/var/logs)

  • Not able to connect CMC or Infoview using Administrator

    Hi, I have a unique problem. We have a sand box (in other department) where we had either administrator as userid or userid of previous contractor. We do have two other userid which we were told that has access to CMC.  I am suppose to support that system to give access to new developer. I can login into Universe and Deski using Administrator userid and blank password or using those two other userids but I can not login into Administrator LaunchPad or infoview page by either. I am getting error message Unauthorized for all userids. 
    This is BO XI rel 2.0 with MySQL and Java Installation. I could login into MySQL directly.
    On the other servers the admin launchpad is havinglink for Infoview and CMC on same page and there are other links at the left hand side but in this whenever I click on link
    http://localhost:8080/businessobjects/enterprise115/adminlaunch/launchpad.html
    then a pop-up window appears. I am not sure if I am doing something wrong or if other person did something.
    Thinking that I am using wrong links I tried various links butin vain.
    Please help..
    Thanks

    It sounds like someone may have inadvertantly set a permission denying all users or the everyone group to login to infoview/CMC.
    I thought this was impossible with the built in administrator account based on testing some time ago. That looks like the right link, can you open a message with support? We may have to test your system DB to find out what's wrong.
    Regards,
    Tim

Maybe you are looking for