Login to the SAP System and opening a new modus takes too long

Hello friends
I have a problem on my SAP ECC 6.0 system. When some users (but not all users) try to login (via SAPGUI) or open new modi this takes within 5 minutes to happen. I have allready excluded local hardware problems on the client PCs (You can logon on the same computer with another user without having that delay).
In Sapgui the Option "Extras - Settings - Do not display picture" is already set.
Could anyone give me a hint please in which direction I could search for the solution? This would be very helpful.
Thanks a lot in advance!
Greetings
Marco

Was a hardware issue...

Similar Messages

Parallel How many times user can login to the SAP system through ITS

Hello all
We are using the ITS ---620 and following 46D R/3 system
R/3 system details:
Kernal :
kernel release :46D
O/S :SunOS 5.8 Generic_108528-05 sun4us
We would like to now, At a time How many times user can login to the SAP system through ITS
Kindly letus know if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
Thanks

I have searched all docs and notes.
Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
The functionality does not exist for SAP Gui for HTML.
Regards,

HT5622 My email address changed, my iCloud still has my old address. Do I just cancel the existing one and open a new one under the new address or what?

My email address changed, my iCloud still has my old address associated with it. Do I just cancel the old iCloud and start awe one or what?

Hello sheryfromzaf
Check out the articles below to go through the steps of changing your Apple ID and then what to do after you change your Apple ID. You will probably not have to change all the Apple ID for all services, just the ones that you use.
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Regards,
-Norm G.

Put these costs of delivery into the SAP system

Hello,
After a delivery is done we receive an invoice from the carrier. So far we are doing the correlation between the costs of the delivery and the delivery note itself manually on an excel sheet. What we would like to do is to put these costs into the SAP system and they should be able to be monitored afterwards ( per query for example ). Do you have any idea or recommondation how to do this?
Many Thanks
Jean

Hello Jean,
Designing a Z table is very easy, you would first figure out all the important fields you would want to maintain in SAP.
Then you would be giving those fields to your ABAPer, who first creates the table with all the important fields you need.
Once that is done you could again take the help of ABAPer to develop a program which when run would load the flat file from the carrier system and update this fields.You can automate this Program by creating a JOB.
Once the table is defined you could have this custom fields to be populated in Sales Order (example you could use Additional data A or B tab in Sales Order header or in Delivery Header and place your custom made fields in it.)
So that once the job is run it would populate the tables and also you would have this data in sales documents.
Once you have the data in SAP its very easy for you to run the query.
HOpe this helps.
Thanks
Murtuza

HTML-DB OAE Javascript to close current window and open a new window

Hi everybody,
We work with 1.6.
What we want is to close the current window and open a new window with the URL mentionned in the window.open('http://www.cf.qc/pls/portal/PORTAL.....,'newwindow').
The new window opening fires only once although we call it many times.
Our javascript is:
function closeTest()
{ alert('closeTest');
if('&REQUEST.'=='QUITTER2'){
w = window.self;
w.opener = w;
w.close();
window.open('http://www.cf.qc/pls/portal/PORTAL.home','newwindow','toolbar=yes,location=yes,directories=yes,status=yes,menubar=yes,scrollbars=yes,resizable=yes');
We call it on our application attributes :
OnLoad="closeTest()"
Thanks. Bye.

Try this on for size:
I have included two functions.
windowRebuild() - opens a new window, maximizes it based on the screen size, removes all toolbars, and then closes the old window.
myLocation(appName, pageName) - builds a url referencing an HTMLDB application, specfic to what server you are currently on. Very useful when you have an application on 3 different servers(dev, test, prod servers), you wouldn't want the server name hardcoded if you plan to export the app to another server.
Also, you need to be careful when using &APP_ID. I am not completely certain how that is resolved at runtime, but I've found it only works when the javascript is in the HTML Header of a page and not stored in the template of the page.
<script language="JavaScript1.1" type="text/javascript">
This functions is for internal application use.
Examples of myLocation:
url = myLocation('&APP_ID.', 'APP_PUBLIC_PAGE');
url = myLocation('MY_APP_ALIAS', 'MY_PAGE_ALIAS');
url = myLocation('184', '10');
function myLocation(myApp, myPage){
var myHost = location.host;
var newURL;
newURL = 'http://'+myHost+'/pls/htmldb/f?p='+myApp.toString()+':'+myPage.toString();
return newURL;
/* Function windowRebuild()
* This function will open a new window and close the old window.
* This function will also maximize the new window and remove all toolbars.
function windowRebuild(){
 if(window.name != 'myAppWin'){
 var url = myLocation('&APP_ID.', 'PAGE_ALIAS');
 var myWin = window.open(url,'myAppWin','toolbar=0,scrollbars=1,menubar=0,status=1,resizable=1,location=0');
 window.opener = 'x';
 window.close();
 if(window.name == 'myAppWin'){
 window.moveTo(0,0);
 window.resizeTo(screen.availWidth,screen.availHeight);
</script>Let me know if that works or you need some more explanation.
Chris

SRW.SET_HYPERLINK - Handle SPACE in filename AND open in NEW WINDOW

Report 10g (10.1.2.3.0 - 32bit on Windows 7 64bit)
Issue #1:
using srw.set_hyperlink to get a handle on *.pdf file on remote server. Report is launched as PDF. PDF that is opened via the URL launches in same window as report. I need run report as PDF, click hyperlink to get handle on another file which should launch in New Window.
SRW.SET_HYPERLINKATTR only useful with HTML and HTMLCSS. Javascript? If so, sample code?
Issue #2:
possible that file retrieved will have spaces in its name. Hyperlink defaults %20 in the spaces of the name, but the link does not successfully retrieve file. Tried replacing spaces w/ %20, but like defaults does not retrieve document; due to actual file name not having the %20 in its actual name. Is there are way to account for the spaces in the URL then "remove" them to find the correct file and open in new window?
Tried using virtual path as well as physical path.
Help with either or both issues is truly appreciated,
Thanks!!

Hello,
When you set the property "Hyperlink", the property "Additionnal Hyperlink Attributes (HTML)" is displayed. Set this property to :
target="_blank"
Regards

Creating tables on SQL studio and viewing the table in the SAP system

i have just created a table using the SQL studio and wants to use it view it in the SAP system using the SAP logon. till now i have not found a way to create it therefore any help is much appreciated.

Hmm... you want to see tables via SAPLogon ??
Ok, let's assume you really want to access tables via ABAP instead.
For that you've two options:
1. Create the table in the ABAP dictonary (SE11) exactly like you created it in the database and activate the table.
After that you can access the table via SE16 or any ABAP as you like.
2. You don't create the table in the ABAP dictonary and use native SQL to access the data.
Neither of these options is meant to be the way to do it.
The correct way would be to design the whole table in the ABAP dictionary and create the table on the database from that.
regards,
Lars

ZGPGL - Copying Accounts and Cost Centers to the SAP system

Hi all,
When I try to copy accounts and cost centers from my excel mapping document to the SAP system I can only copy about 20 of them at a time. I have about 30,000 accounts and am wondering if there is a quicker way to do this.
Thanks,
Deki

Write a catt script to create the GL account and cost center master data. they are relativley easy to learn and create. They work great for this. I have used them several times for that purpose.
pls assign points to say thanks.

Error message 'Please log on to the SAP system' when selecting 'shop'

In SRM when we click on 'shop' or 'Goods Receipt' we get the error 'ITS System Information 'Please log on to the SAP System' where it prompts user to log on again. However when user logs on it opens up the same screen again saying please log on to the sap system.
This only happens when we shop using the External ITS (wgate), EBP works fine using the Internal ITS.
Please can someone help.
Kindest Regards
Paul

Hi
Please try this ->
Look using SRM transaction SITSPMON and RZ20, RZ21.
Also Please check SAP OSS Note 517860
-> For ITS, You need to maintain the RFC connection in the connection type "T" i.e TCP/IP. Maintain in the Table - TWPURLSVR.
Ensure that you have maintained correct entries in the TWPURLSVR table using SM30 transaction for the ITS Web path (http or https address path). Note you are passing port - 8001 in the address here. Incase you face problems, Please ask you BASIS person to help you out.
-> Please ask you BASIS person to help you out for maintaining ITS settings. (Ensure IACOR service is running properly - ITS server is running), through the transaction SMICM
-> What all logs appear in SLG1 and SM21 transactions after publishing all the Internet services.
-> If you are using ITS 6.2,you need to do the IACOR settings for SRM on the ITS server.Also in SE80 mainatin the Site for SRM system.After this ,you can publish all the ITS services usig the report,W3_PUBLISH SERVICES.
Related links ->
Integrated ITS :Login Problem
Re: ITS_CANT_LOAD_INCLUDE in BBPstart service
Re: ITS_DEST_NOT_FOUND
Re: ITS Configuration
Re: ITS Template not found
Do let me know.
Regards
- Atul

What is source system and open hub destination?

Hello,
Kindly tell me In BI data modeling workbench ,in modeling there is are two areas name as "Source system" and "Open Hub destination".What is mean by this???How we use it in BI?

Hi,
Source system as the name suggests mentions the source of data. The place from where you are extractin data to BW.
http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/27bcf087c7464db8b95eaa717b6e6a/content.htm
OpenHub is for exporting data out of BW.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11e1b990-0201-0010-bf9a-bf9d0ca791b0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3042c5fc-21a8-2910-c79e-ad530260ae2e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01d3a090-0201-0010-9783-bc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/bf/50453c01f4f75fe10000000a11402f/frameset.htm
Thanks,
JituK

Discovery of SAP Systems and Applications

I want to discover all the SAP systems present in my organization (System Landscape). Also, I want to get the information about the applications installed in them, for instance CRM, SRM etc. I believe I can use CCMS to do this which has this information in it's central repository but then all the remote repositories have to register themselves initially. What if one or more of them have not registered?? I somehow want to get the fool-proof information regarding all the systems whether they are registered or not. Any ideas or suggestions regarding this please??? Thanks in advance!!

first you need to activate and start you sld to do this select any of your system login to sld http://host name:50xx00/sld where xx is your instance number
from the abap side you need to sldapicust and set the logon
credentials for you abap system to SLD and then got to RZ70 and execute it(this whill schedule a job in the BTC) after this got o sldcheck and see if this is working fine
form the java side logon to visual admin go to server then services select sld data supplier and enter the logon information in HTTP tab and select test/trigger buttton on the top
there are lot of tutorials in this website on how to configure SLD in this website
you will also get a step by step document on setting up SLD at http://host name:50xx0/sld/doc/sld.pdf
Message was edited by: Siva Ram

Error while creating request list Unable to detect the SAP system directory

We are upgrading SAP BW (NW 7.0 EHP1) to SAP BW (NW 7.3)
source OS: Windows 2008 R2, source DB: MSSQL server 2008 R2 SP1 CU3
I had started the upgrade by running: STARTUP.BAT
I had started the DSUGui on the server (CI / DB on the same server) from: D:\usr\sap\BP1\upg\sdt\exe\DSUGui.bat
I ran both programs (run as administrators).
Once SAP Gui connects and was able to create userid/ password and when ready to start the initialization phase (click next)
gives me the error
Error while creating request list - see preceeding messages. Unable to detect the SAP system directory on the local host
I had tried STARTUP.BAT "jce_policy_zip=Z:\export-import\downloads\jce_policy-6' and still the same error.
I had started DSUGui.bat with trace and the trace file contents are
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[D:
usr
sap
bp1
upg
sdt
trc
server.trc]/>
<!PATTERN[server.trc]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:102) [Thread[ExecuteWorker,5,main]]: Execution of command com.sap.sdt.engine.core.communication.CmdActionEvent@376433e4 failed: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.CmdActionEvent [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
 at com.sap.sdt.dsu.service.req.DSURequestListBuilder.persistSystemInfo(DSURequestListBuilder.java:277)
 at com.sap.sdt.dsu.service.DSUService.createRequestList(DSUService.java:338)
 at com.sap.sdt.dsu.service.controls.DSUListener.actionNext(DSUListener.java:144)
 at com.sap.sdt.dsu.service.controls.DSUListener.actionPerformed(DSUListener.java:67)
 at com.sap.sdt.server.core.controls.SDTActionListener$Listener.actionPerformed(SDTActionListener.java:46)
 at com.sap.sdt.engine.core.communication.CmdActionEvent.actOnEvent(CmdActionEvent.java:43)
 at com.sap.sdt.engine.core.communication.CmdEvent.execute(CmdEvent.java:69)
 at com.sap.sdt.engine.core.communication.ExecWorker.handleCmd(ExecWorker.java:36)
 at com.sap.sdt.engine.core.communication.AbstractWorker.run(AbstractWorker.java:93)
I could not get Upgrade started. Any help is appreciated
Thanks
Prathap

Did you get this solved?
I have the same problem

Unable to Logon to the SAP System after Installing SAPNW2004sSneakPreviewAB

Hi
 I Installed SAPNW2004sSneakPreviewABAP.
 If i am trying to run the NSP Server it first Starting (Showing Blue Color ) and after few seconds it is becoming Yellow in Color. When i cross checked in Process list it is showing one of the process in yellow color i.e.
disp+work.EXE whose description is Dispatcher
and Status is showing as "Running but Dialog Queue standstill"
May be because of this i am unable to log on the SAP System.
One more thing i got a licence key from SAP but when i am trying to intall licence key using saplicence -install this is also not working it is showing following error message.
SAPLICENSE (Release 700) ERROR ***
 ERROR: Can not set DbSl trace function
 DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
 RC-INFO: error loading dynamic db-library - check environment for:
 dbms_type = <db-type> (e.g. ora)
 DIR_LIBRARY = <path to db-dll> (e.g. /usr/sap/SID/SYS/exe/run)
Could you please help in this

Please refer to this post as this is a duplicate.
Problem after installing SAPNW2004sSneakPreviewABAP
Please close this post. Thanks.
Regards,
Rich Heilman

Close the current UI and open another one

Hello everyone,
I've got the following code and I want to close the current window and open another one. When i use "System.exit(1);" it closes everything when I use "this.dispose()" it doesn't close anything what could I try to get this to work? any suggestions?
the code is:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
//public class Equip_or_Job implements ActionListener {
public class Equip_or_Job extends Frame implements ActionListener {
    JFrame dFrame;
    JPanel jePanel;
    JButton choice;
    JComboBox jeqid = new JComboBox();
    public Equip_or_Job() {
        //Create and set up the window.
        dFrame = new JFrame("Work with Jobid or Equipid");
        dFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the panel.
        jePanel = new JPanel(new GridLayout(2, 1));
        dFrame.getContentPane().setLayout(new BorderLayout());
        //Add the widgets.
        addWidgets();
        //Set the default button.
        dFrame.getRootPane().setDefaultButton(choice);
        //Add the panel to the window.
        dFrame.getContentPane().add(jePanel, BorderLayout.CENTER);
        //Display the window.
        dFrame.pack();
        dFrame.setVisible(true);
Create and add the widgets.
    private void addWidgets() {
         //Create widgets.
          jeqid.addItem("Chose by Job");
          jeqid.addItem("Chose by Equipment");
          choice = new JButton("Chose");
            //Listen to events from the Convert button.
            choice.addActionListener(this);
          jePanel.add(jeqid);
          jePanel.add(choice);
    public void actionPerformed(ActionEvent event) {
          String sel = (String) jeqid.getSelectedItem();
        if("Chose by Job".equals(sel)){
               InsertNewDates inj = new InsertNewDates();
               //System.exit(1);
               dispose();
          else if("Chose by Equipment".equals(sel)){
               InsertNewDates ineq = new InsertNewDates();
               //System.exit(1);
               dispose();
Create the GUI and show it. For thread safety,
this method should be invoked from the
event-dispatching thread.
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        try {
               UIManager.setLookAndFeel(
                    UIManager.getCrossPlatformLookAndFeelClassName());
          catch (Exception e) { }
        Equip_or_Job eorj = new Equip_or_Job();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
thanks in advance :o)

I'm not exactly sure what you want to do, but...:
dFrame.setVisible(false) hides the current Frame and the application is still running
Best reagrds, Marco

How to check data sent by XI in the SAP system?

Hi All,
I have a File to Proxy scenario. I have generated and activated the proxy. The scenario got executed successfully.
Now, how can I check the data being sent by XI in the SAP system? Kindly help.
Thanks,
Karthik

Hi,
If u want to check in XI system as said by experts you can check in SXMB_MONI transcation(Check for chequred flag:Sucess).If not you need to see the error message and troubleshoot.
if the message is sucess in XI,then goto your R/3 system.
you can check SXMB_MONI in R/3 system.Tis is the message before going to proxy.
Then as experts have already pointed out you must be knowing which tables are getting updated.
check in those tables for the updated data.
otherwise you need to debug proxy,
Plz keep the thread updated.
thanks and regards
parvez

Login to the SAP System and opening a new modus takes too long

Similar Messages

Maybe you are looking for