Login(user ID and Password) to my VI

Hello,
Iam creating a vi with some parameters...........My VI consists of Tabs, now in home page user should enter user name and password...........and if it is success then the VI should give acess to all tabs......otherwise it should display that wrong password......there should be option to change password...........
I HAVE attached just an front panel......please go through and provide the solution......
Thank you

duplicate
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Similar Messages

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks.

How to read the data from a file in another computer with user name and password login

How to read read the data from a file in anohter computer which need to login with user name and password?

duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

Automatic login in mavericks not working. I still have to enter user name and password

I upgraded the original Hard Drive to SSD drive. After the upgrade, I can no longer automatically log in. I now have to enter my user name and password. I tried resetting automatic login in Users and Groups but it doesn't work in Mavericks.

Hello,
To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account?
How about these?
Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
Then Reset your Keychain...
http://support.apple.com/kb/TS1544
https://discussions.apple.com/thread/5225064?tstart=0

Oracle e business suite user name and password to login oracle bi?

Hi,
it is possible to use oracle e bussiness suite user name and password to login oracle BI PUBLISHER SERVER.??
we are using 11.1.1.6.0 OBIEE and R12 (12.0.6) e business suite.

SAURAV KUMAR SINGH wrote:
During Oracle Installation i have given SID : RD1 & Password :admin@1234
... insert BUZZER sound here ...
Using "@" in a password for a DB User is not supported at all (allthough it works).
I did so myself once and I think it was possible to get a connection utilize quotes,
but I do not remember which ones in what way.
Could have been like
sqlplus "sapsr3/admin@1234"
but not very sure any more.
My be toy around with this, but more easy is to use brtools and change the
password to contain only valid oracle letters.
The problem with "@" is, that it delimits the SQLNET Connect identifier.
Volker
Oh, and for executing brtools, do not provide a user at all or only "-u /"
This should do a sysdba connect.
Edited by: Volker Borowski on Jan 30, 2012 7:25 PM

How to hide user id and password for auto login in Analyzer 6.5?

Could anyone tell me is it possible to hide the user id and password for auto login in Analyzer version 6.5 and how?Thanks in advance...

Sainath,
Referring admin guide as mentioned by Craig is good option.
Let me give you few steps that I did in one of my projects.
Open command prompt and navigate to the path "C:\Oracle\Middleware\EPMSystem11R1\products\DataRelationshipManagement\client\batch-client".. here you can see many see other utilities as well.
drm-batch-client-credentials.exe is the one used to encrypt the userid and password.
open this in command prompt and then choose the application to which you want to encrypt the password.
then remove userid and password from batch script then run it... it does what you want

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

That message is listed in two scripts on the bank's site. One function that can display the message is named PhotoRotator and the other is named PromoRotator. However, I can't seem to trigger the error myself.
If you have any add-ons that alter the page, such as ad blockers, try creating an exception for these sites and see whether that helps:
www.northrim.com<br>
www.northrimbankonline.com
You also could try this logon page: https://www.northrimbankonline.com/onlineserv/HB/Signon.cgi
(''Obviously you should be cautious about links offered on public forums to ensure you are not being phished! Check them out carefully before entering your username and password.'')

How to use DS 5.2 to create LDAP user ID and password to Login to Sun ONE I

Hi all,
I have just install Sun One Web server 6.1, Sun One Directory 5.2 and Sun One Instant Messaging 6.1 together on Win2K advance server. And I have successful launch Sun� ONE Instant Messenger.
But I can not know, how to create LDAP user ID and password to Login to Sun ONE Instant Messenger???
Could anyone help me to solve this problem?
I'm looking forward to receive your reply soon.
Thanks

Hi Tuo,
I think you better ask this in the forum where the ACS experts are, since this does not seem to be a problem on the ASA side.
hth
Herbert

PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

There are no children, nor other suspicious characters that have "played" with my computer. One moment I'm in, the next time I turn on/restart the powerbook I'm at a screen with the name of the hard drive and two fields: username and password. Not a list with pictures and names ie 'Katie Jo' with an orange icon and 'Guest' with a silhouette of a head.
In an attempt to remedy this problem, I backed up files using target disk mode and firewire cable. I then, rebooted in single user mode, typed in the correct script and essentially made the computer appear virgin again. Original start up welcome screen display with multiple languages, and then set up prompts such as language, network, and registration. After completing the cues and the "just a few more questions" page, I press continue and am left at a grey standstill, with the continue button greyed out, and no other actions. I'm only able to "go back" by clicking the go back button, all the way to the beginning of the set up, and as I proceed through the steps a second time, I'm greeted with the same halt. What is this?

I have forgotten both my user id and password to login to the iMac.

I have forgotten both my user id and password to login to the iMac. It is my children's computer so I don't have it linked to the cloud. I believe it is running Lion but I can't get past the login screen to check.
I have tried the administrator password with no success and I have also tried command R to restart with no success. It is on my wireless network if that would help.
Any suggestions?
Cassandra

I cannot get past the login screen to follow those instructions. The administrator password is not working.
Cassandra

How to Assign User name and password to the login screen on button click without user type...

Hi,
My requirement is as follows,
I have three inputs which is User name, Password and URL. URL may be like anything like for example gmail,yahoo,hotmail like that.
No need to authenticate the URL. Just i want to place the credentials in User ID and Password controls.
On button click the URL should open in browser and the credentials should place in the controls in log in page.
How to achieve it. Ultimate thought is the user should know the "Password",only admin know the password.
Thanks & Regards
Poomani Sankaran

Hello,
If URL's are internal (not third party) then you can do this by modifying both applications. If you are trying to do this with third party then you have to contact product owner. I don't think there is any code or solution for third party application where
you can set values of controls.
For internal URL's you can create custom web service and call this web service in both the applications. One to get value from first app and then second to set value in another app.
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Norton Manage Logins does not automatically enter user ids and passwords

I have Norton 360 v. 4.3 installed and one of the features is Manage Log ins. When you go to a web page it automatically puts in the user id and password to log into the website. When I upgraded to Firefox 4.0 this feature does not work any more. I have searched the help database and can't find a solution. Does anyone know how to activate this feature? Thanks.

Norton have indicated they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US

Connection Wizard requires to enter user ID and password on every login

Hello,
We just started using SAP BPC 5.1 When connecting to a server Connection Wizard requires every user to input user ID and password. "Use My Microsoft Windows user ID and password" is grayed out.
Have anybody experienced this problem before? Any idea how to fix this?
Thanks,
Roman

If you woudl like to avoid to insert every time user and password you have to do follow actions:
1. Into BPC application server you have to open server manager
Options - Client Options and on that window you have to uncheck the button Enable Server to Sarbane-Oxley compliant
2. If the installation server was done with FQDN (fully qualified domain name ) or with IP instead to use short name for server then you have to add into internet explorer of client the site:
http://nameofbpcserver into trusted sites.
Open internet explorer
- tools - internet Options
Tab Security
Select Trusted Sites
Select button "Sites"
Uncheck button: "Require server verification (https)..."
type into entry field http://nameofyourbpcserver" and add
In this way you will have the option to use windows authentication enabled.
Regards
Sorin Radulescu

Firefox will not save my user name and password for one of my sites. How can I fix this problem. It is getting annoying having to reenter every time I check this site. Is there a solution.

I had my user name and password saved for my library site. My grandson hit something and now the saved user name and password are gone. It asks me every time to enter it and it is getting annoying. How do I fix this. I want Firefox to remember these codes.

You can create a bookmark with the JavaScript code via a right-click on the "Remember Password" link on the squarefree.com website and choose "Bookmark This Link" and select the "Bookmarks Toolbar" as the destination folder for easy access.
* https://www.squarefree.com/bookmarklets/forms.html#remember_password
You need to use the "Remember Password" bookmarklet before or after filling the name and password field on the website with the <u>login form</u>, but before submitting the login form by clicking a button on the web page.
If the site is using autocomplete="off" then you see a number not equal to 0 (i.e. attributes were removed) in the pop-up alert from the bookmarklet and Firefox should offer to remember the name and password via a drop down dialog of the key icon that will appear on the location bar (Firefox 4+) or via an info bar at the top (Firefox 3).

Time Capsule won't accept my user name and password for access - Help!

Hi all,
My Time Capsule seemed to stop working one day and I had to do a hard reset with the little button at the back. After that it worked and I restored my wireless network settings but now I can't access the Time Capsules hard drive with Time Machine.
When I try to choose it as my Backup Disk in the Time Machine preferences it says "Enter your user name and password so Time Machine can access the file server "Our Time Capsule" (the name of my time capsule). However, every time I try to enter my password I get "Sorry, you entered an invalid username or password".
I've already tried several resets of the Time Capsule and I've also tried logging on my computer as the Root user and changing my administrator account password back and forth but no go.
Help! and Thanks.

Norman & Harry,
Consider the following:
*_Time Capsule Keeps Asking Me For a Password_*
It will be important to know what is going on, or what you are doing when it asks for the password. Is it asking for a password only when Time Machine attempts a backup? Consider this:
It is NOT your username and password it wants when you try accessing the Time Capsule. (I know... it SAYS "username and password") But it means the Time Capsule's Name and Password.
You will find that by launching Airport Utility.
Select the TC on the left.
Click "Manual Setup".
Click the "Time Capsule" Tab.
You will see "Time Capsule Name:" and "Time Capsule Password".
Make sure “Remember password in keychain" is checked.
That is the information you need to enter when it asks for "username & password."
*I Don’t Remember What My Time Capsule Password Is*
You can see what your current TC password is by going into Keychain.
Open your Keychain and select "login" from the Keychains pane in the top left. Highlight "Passwords" in the Category pane from the lower left.
Sort all the items by Kind. Note everything labeled "Airport...". How many do you have listed? There should only be one "Airport base station password" for each base station that you have active. Also, there should only be one "Airport network password" for each network you have created. If there are more than these, then delete all but the ones with the most recent Modification date.
To see what passwords are being stored, double-click your Time Capsules' entry. A new window will appear.
Put a check beside "Show Password". You may be asked for your own Admin password so enter that.
Now the Password field will display the password you entered into Airport Utility for your Time Capsule
*It Still Won’t Accept the TC Name and Password*
Launch Airport Utility --> Manual Setup.
Select "Disks" in the tool bar above.
Click the "File Sharing" tab.
Is "File Sharing" checked? It should be.
What is selected beside "Secure Shared Disks"? If it says "With Accounts" or "With a Disk Password" then the system will ask you for a password every time it mounts the TC hard disk. If you switch it to "With Time Capsule Password" then use the password you designated earlier in the “Time Capsule" tab. It should only ask you once and then never again - because you had checked "Remember password in keychain".
If you have made any changes then click "Update".
Let us know if this resolves your issue.
Cheers!

Login(user ID and Password) to my VI

Similar Messages

Maybe you are looking for