Login user id is invalid in oracle 11i apps 11.5.8 on windows 2003 server

Dear All,
I Installed oracle 11i apps 11.5.8 on windows server, when I try to start ie browser
with user administrator and password, it is showing me, user id is invalid, try to login in again.
and on the status bar down it is showing loginscript_logonsubmit().
I can login with sql+ as apps/apps.
Anybody can help me out.
Thanks in advance,
best regards,
Ather Hussain
[email protected]

your problem is not very unusual... I also faced the similar situation cpl of times when Oracle was not able to continue the installation coz the Immediate Shutdown was failed. Actually During the installation, Oracle mounts/opens the database and shuts it down many times and few times, Oracle is unable to shutdown cleanly as some process is hanging or not responding.
Piece of advise is that always use staging area to install Apps as it takes long time on Win2K (anything between 4-12 hrs) to install it and CDROM Access is lot slower than HDD. Also, it will prompt u every time to insert tbe CD. All this hassle can be bypassed by using the staging area. Read the Installation help document on how to create it.
For failure reasons, look in ur installation log file which is created in the default Temp folder usually C:\documents and settings\USERNAME\local settings\temp for WinXP or C:\winnt\documents and settings\USERNAME\local settings\temp for Win2K.
post or email me at [email protected] or [email protected] for further help/details.

Similar Messages

Oracle discoverer 9i can not running at windows 2003 server

Hi, Please help me.
When I upgrade from windows 2000 advance server to windows 2003 server the oracle discoverer 9i can not be open. When I open it there is a error "Failed to open document"
How to make it run smoothly at windows 2003 server?
Thank You

Hi,
This is a bug in your version of Discoverer. There is a patch to make it work with windows 2003 or you can upgrade your Discoverer to a later version. The patch should be available from Oracle support. I don't know of anyway to make your version work with 2003.
Rod West

Oracle 10gR2 (10.2.0.1) on Windows 2003 Server

I have installed the above version on Windows 2003 Server(x64). Now we are planning on clustering the same for production environment. I would like to know the following.
1. Can std edition can be installed on this cluster?
2. If so, what are the components that has to be installed?
3. If only EE will work for clustering, we are not going to do RAC? what is the other source?
Any information/links for the above information is greatly appreciated.
Thank you in advance.

Dear,
You can go for OracleFS(failsafe). It is a Acive Passive clustering method unlike RAC.

Oracle 10G slow Performance on Windows 2003 Server

Hi there,
Looking for a little assistance in locating a bottleneck that's started to hit our system this week. It's really odd because it's been starting around 10am every morning this week.
today is the worst that I've seen it because it's almost brought the system to a halt.....
We're running Oracle 10.2.0.1 64b on Windows 2003 Server 64
The server has 16 processors and 64GB of RAM currently the CPU is sitting at 5% and the RAM usage is at 16.4GB
It's a blade server with a SAN backend and I'm assuming the latency is coming from the disk but I need to determine this for a fact.
I've only been a DBA for about a year and I'm stilling learing how to locate and identify issues. According to OEM I'm seeing
a ton of I/O from the users. So anyways, any help or insight would be much appreciated and a learning experience for me.
Thank you for your time and asistance.
SB

Thank you for the reply!
We've had finding one FOREVER, I can't resolve it and I've read somewhere to ignore because OEM is false reporting. I'm adjusting DB_Cache now...
Isn't possible that too much cache could be bad for the system and cause slow downs?
FINDING 1: 100% impact (29725 seconds)
Significant virtual memory paging was detected on the host operating system.
   RECOMMENDATION 1: Host Configuration, 100% benefit (29725 seconds)
      ACTION: Host operating system was experiencing significant paging but no
         particular root cause could be detected. Investigate processes that
         do not belong to this instance running on the host that are consuming
         significant amount of virtual memory. Also consider adding more
         physical memory to the host.
   RECOMMENDATION 2: DB Configuration, 100% benefit (29725 seconds)
      ACTION: Consider enabling Automatic Shared Memory Management by setting
         the parameter "sga_target" to control the amount of SGA consumed by
         this instance.
FINDING 2: 51% impact (15210 seconds)
The buffer cache was undersized causing significant additional read I/O.
   RECOMMENDATION 1: DB Configuration, 9% benefit (2685 seconds)
      ACTION: Increase the buffer cache size by setting the value of parameter
         "db_cache_size" to 7568 M.
   ADDITIONAL INFORMATION:
      The value of parameter "db_cache_size" was "6912 M" during the analysis
      period.
   SYMPTOMS THAT LED TO THE FINDING:
      SYMPTOM: Wait class "User I/O" was consuming significant database time.
               (84% impact [25073 seconds])

Moving oracle 9i database from windows 2000 to windows 2003 server

hi everybody,
plz provide me a solution how to move oracle 9i database from windows 2000 server to windows 2003 server with step by step and also with commands plz as i am very new to oracle
thanks in advance
suresh

Install 9i on windows 2003 server and patch to the same level as the Oracle on Windows 2k
Shutdown and make a cold backup of your old database. That includes datafiles, controlfiles, redo files, init file (spfile)
Copy and put these files to the exact same directory structure/location, for example if old file is under D:\oradata\mysid\ then the file on new file should be under same directory. (If you are using Network Storage that make things easier, just mapping to the same drive letter.)
Also make sure archive log dest and all dump dest directories are created. You don't have to copy all old logs and dump files over.
Use oradim to create a new service for the database instance
http://www.psoug.org/reference/oradim.html
Set proper ORACLE_HOME, ORACLE_SID envionment varibles
Run netca to configure listener, actually copy listener.ora and tnsnames.ora to $ORACLE_HOME\network\admin will do
Try to start the database

Oracle 11i E-Business Suite Installation on Windows fails

All you Oracle 11i gurus out there, please HELP as I am at my wit's end.
I am trying to install Oracle 11i E-Business Suite (downloaded from the edelivery Website) on Windows 2003 Server with dual PIII CPU, 1GB RAM, and 150GB+ disk space.
My Oracle 11i install on Windows has been failing during Step 1 of 5 following the process of unpacking the 114 zipfiles for the 9.2.0 database even though all the diagnostic steps passed.
It appears the install is failing on the following step:
InstantiateFile -d d:\oracle\visdb\9.2.0\appsutil\driver\instconf.drv
I have MKS Toolkit installed on C:\MKS and VC++ installed on C:\MVS\VC98.
I have renamed make.exe to gnumake.exe in the C:\MKS\mksnt folder and copied the linker (link.exe) from C:\MVS\VC98\bin to the C:\Windows\System32 folder.
The InstantiateFile step is executing some Java classes. I have also installed the JRE on C:\jre1.5.0_06, although it's doubtful this will impact the install scripts since the scripts are all hardcoded with the included JRE 1.4.2.
Why do Oracle DBAs and users deal with this crap? A software install should not be this difficult.
Thanks in advance.

Thanks to previous responder for tip regarding JDK/JRE anchor strings. I'm not sure if that is a problem. After letting the install process (java.exe) run for over an hour, I finally got past the InstantiateFile step. It looks like the process just takes a long time with no visible progress sometimes. After 5-6 hrs, it looked like the install succeeded (for the most part). There were still some errors in the error logs related to the Concurrent Manager (TNS-12541: TNS:no listener) I believe. If anyone has insight on what this error msg means, I would greatly appreciate a reply.
The other problem I am tackling right now is how to explicitly set the Forms processing mode to HTTP rather than the default socket mode. According to the 11i docs (and Forms Developer 6i docs), you should only have to set "connectMode=HTTP" in the config file, appsweb.cfg, to make this happen. However, when I try bringing up a client form, the form hangs. So, obviously, something is amiss. A related question is whether one can run Forms in only HTTP mode and not HTTPS (and thus avoid having to install SSL). I would greatly appreciate any insight from fellow users.

Accessing Oracle 11i apps through Pocket PC

Normally for any windows client to connect to the Oracle Server we add a entry into the client host file i.e. windows\system32\drivers\etc\host . Once we add the entry we are able to access the Oracle Application.
From a Pocket PC 2002 how do I access the oracle 11i apps ?

Is this possible by enabling wireless server and accessing directly through jsp pages?

How to Install Oracle 11i apps 11.5.9 on RH9 and how to make staging cd

Dear All,
I installed RH9 server and I want to know step by step how to install oracle 11i apps 11.5.9 on linux.
and I want to know how to make staging directory from the CD's.
Anybody can help me out.
Best regards,
Ather Hussain
[email protected]

Well brother i hope i could help you in this regard but sorry for this. If you have any trouble doing all this is Windows, then plz do let me know.
Wish you best of luck

Difference between Oracle 11i Apps DBA & Oracle Application server 10g DBA

Hi All....
can anyone explain me the *"Difference between Oracle 11i Apps DBA & Oracle Application server 10g DBA"*
Can Oracle 11i Apps DBA work in a Oracle Application server 10g DBA environment.
Regards,

Oracle Apps is a suite of financial applications.
Oracle Application server is Oracle's scaled up implementation of Apache or Weblogic or similar products.
While Oracle Apps might use Oracle Application Server as middleware, Oracle Apps is much, much more than Oracle Application Server.
An Oracle Apps DBA is primarily busy on the functional side, and with implementing an ongoing stream of patches ;)
The two functions have almost nothing in common.
Sybrand Bakker
Senior Oracle DBA

EP 6.0 on Oracle 9i 32 bit for Windows 2003 server x86_64 bit env Install

We are facing issues while performing instalations of EPortal 6.0 on Windows 2003 enterprise edition server(X64 version) on AMD 64 bit processor.We have installed 32 bit Oracle software alongwith 32 bit SAP kernel 640 dumps
We had to install oracle 9.2.0.5 32 bit ,since there is no oracle
realease for oracle 9i 64 bit ,on OS windows 2003 server X_86 64 bit,after doing this when we go ahead kenel 32 bit, we faced error during database creation phase of the NW java installation.The error logs are
as follows,
ERROR 2008-04-05 23:09:27
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message:
ORA-12546: TNS:permission denied
plz respond asap

hi sm,
this seems to be an issue with the rights of the user and the DB install. check is the TNS is up and running and that the SIDADM has fill access to it. Also , have you checked the latest PAM. why are you trying to implement EP6 right now? I would suggest to go for EP7.0
regards,
Shantanu

Oracle 9i on Windows 2003 server - DBCA error

1. This is the error message that I get when I am trying to install the 9.2.0.3 software in a new oracle home. There is a 10g database which sits in a different Oracle home. The OUI runs smoothly until it comes to the point where the Database Config Assistant tool starts running and then I get this error and the installer hangs. Could anyone let me know why I might be getting this error.
java.lang.UnsatisfiedLinkError: initializeCluster
     at oracle.ops.mgmt.nativesystem.WindowsSystem.initializeCluster(WindowsSystem.java:390)
     at oracle.ops.mgmt.cluster.GetActiveNodes.initializeCluster(GetActiveNodes.java:260)
     at oracle.ops.mgmt.cluster.GetActiveNodes$ClusterWareThread.<init>(Compiled Code)
     at oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:139)
     at oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:158)
     at
     at oracle.sysman.assistants.dbca.backend.Verifier.isRawFeasible(Compiled Code)
     at oracle.sysman.assistants.dbca.backend.Verifier.processRawConfigFile(Compiled Code)
     at oracle.sysman.assistants.dbca.ui.ProgressOnlyHost.performOperation(ProgressOnlyHost.java:138)
     at oracle.sysman.assistants.dbca.backend.Host.startOperation(Host.java:2171)
     at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:99)
     at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:161)
Agent Config Asst
Parameter "orahome" = C:\Oracle\product\ora92
Parameter "nodeinfo" = NO_VALUE
java.lang.UnsatisfiedLinkError: initializeCluster
     at oracle.ops.mgmt.nativesystem.WindowsSystem.initializeCluster(WindowsSystem.java:390)
     at oracle.ops.mgmt.cluster.GetActiveNodes.initializeCluster(GetActiveNodes.java:260)
     at oracle.ops.mgmt.cluster.GetActiveNodes$ClusterWareThread.<init>(Compiled Code)
     at oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:139)
     at oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:158)
     at oracle.agent.AgentCA.configureOPS(AgentCA.java:74)
     at oracle.agent.AgentCA.main(AgentCA.java:39)
Exception in thread "main"
FYI - I have installed the OUI patch Oracle Universal Installer release 2.2.0.18.0 for Windows and the Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows after I installed the 9.2.0.1 database software.
I then tried to run the DBCA tool from the 'Start > Programs>Oracle 9ihome>' menu to create the new Oracle 9.2.0.3 database but the DBCA assistant would not start up.
2. I have a related question:
Has anybody performed a downgrade of Oracle 10g database to Oracle 9.2.0.3 database using export/import?
Can you perform a full database export of the Oracle 10g database using the 9.2.0.3 export utility and then perform a full database import into Oracle 10g? I have read some documentation that states this is not possible. Can anyone verify or confirm how they did this migration? So is the only option then to perform a table or user level export?
Also, if both the databases reside on the same Windows 2003 server box, how can you ensure that the source database files are not overwritten?
Any help would be appreciated.
Thanks,
Vishal.

It only happens when you have oracle 10g and Oracle 9i on the same machine.
You can run 9i dbca successfully, if you rename the 10g "orasrvm.DLL" found in any 10g BIN directory. Rename it back after you are 9i dbca is complete.
Please complete details for this issue see
http://orafaq.net/maillist/oracle-l/2004/10/08/0335.htm
Thanks
Ravisayal

The old allowing oracle 3GB virtual memory on windows 2003 server question?

Hi all,
I have a 9.2.0.7.0 database on windows 2003 server (32bit). 4 dual core cpu's and 16GB of Ram.
I have set .use_indirect_data_buffers=TRUE and *._enable_NUMA_optimization=FALSE.
The db_block_buffers is set at 4GB.
Shared_pool 200MB
Large_pool 56MB
Java pool 56MB
PGA is currently at 400MB
AWE_WINDOW_MEMORY is set at 720MB (which is the lowest I can set it)
At the moment there are various jobs running on the database and no users logged on and the virtual memory is at 1.8GB.
The problem is as soon as the users logs onto the DB the virtual memory goes over 2GB and we see the error 'ORA-04030: out of process memory when trying to allocate 2416 bytes'.
Now I have edited the boot.ini with the following parameters:
multi(0)disk(0)rdisk(0)partition(1)\WINNT="UBS WSP - Wintel Server Platform with PAE" /fastdetect /PAE /4GT
because the /3GB parameter switch started the server with lots of errors.
The oracle.exe process still seems unable to go over the 2GB limit with getting 'ORA-04030' errors.
Can someone tell me if I have missed anything? Or a reason why oracle is not using the switch?
TIA
Eddy

Satish,
see metalink Note:1036312.6 : Utilizing Up to 3GB Virtual Memory on Windows.
it says :
"The 32-bit versions of the Windows® 2000 Advanced Server and Windows NT Server 4.0, Enterprise Edition, operating systems were the first versions of Windows to provide applications with a 3-GB flat virtual address space, with the kernel and executive components using only 1 GB. In response to customer requests, Microsoft has expanded the availability of this support to the 32-bit version of Windows XP Professional and all 32-bit versions of Windows Server™ 2003."
of course, we mustn't be mistaken with the AWE switch (/PAE) that is not available for standard edition.
http://support.microsoft.com/kb/291988 ==> tells more about what can be supported
regards,
marc

Installin Oracle 10g rel 2 on windows 2003 server

Hi
I am trying to install oracle10g on windows 2003 server standard edition SP1. When i run the OUI i get the following error.
OUI-10133:Invalid staging area. There are no top
level components for Windows Nt or Windows 2000 area. And i am not able to install.
Can somebody help in this.
Thanks

This is a problem with the media.
I suggest copying all the files to a local hard disk and running the installer from there. I don't have good luck installing from CD with Oracle's databases - not sure why. I never have a problem (and it's WAY faster) installing from disk. You can erase the 800 MB of files after the install if you need the space.

Oracle 9i - Unable to set /PAE and /3GB Switch in Windows 2003 Server SP2

Hi
I was wondering if anyone had any experience on Windows 2003 Server (SP2) with setting /PAE and /3GB switches.
I am unable to set both together, setting one or the other works fine in the boot.ini.
Oracle seem to think you can set both but it causes my OS to crash/become unstable.
Has anyone set both switches together on 32 bit Windows 2003 Server successfully?
I am using Oracle 9.2.0.3 Enterprise Edition.
Thanks

The server is new. But we installed 10g before 11g was available. Then upgraded to 11g, so it is a little mess. What the oracle installer should have done in a fresh install, it is maybe not what the server has now.
I have checked for memory issues, processor issues, http errors, every EM setting and metric, and everything looks just right, but the applications are slow and the users are upset.
Anyway, thanks for the advice. Maybe we will need to re-install everything or go back to 10g on Windows 2003 Server x32. That configuration was working fine before rushing into 11g.

Oracle 9i rac windows 2003 server

Hai,
I am planning to do oracle 9i rac windows 2003 server(enterprise edition service pack 2) installion. All the pre-requiste has been completed. At the time of running clustersetup.exe , it is exiting without showing an error. The event veiwer is having the below mentioned details.
Event Type:     Information
Event Source:     DrWatson
Event Category:     None
Event ID:     4097
Date:          4/8/2011
Time:          3:05:13 PM
User:          N/A
Computer:     IBDB1
Description:
The application, C:\preinstall_rac\clustersetup\clustersetup.exe, generated an application error The error occurred on 04/08/2011 @ 15:05:13.921 The exception generated was c0000005 at address 004014C1 (clustersetup)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any idea how to resolve this issue?
Regards
Sridhar

Windows 2003 is not listed as supported platform:
http://download.oracle.com/docs/html/A95493_01/reqs.htm#1101810
I would not try to install a desupported database version on an unsupported platform.

Login user id is invalid in oracle 11i apps 11.5.8 on windows 2003 server

Similar Messages

Maybe you are looking for