Login user/pass for Cisco 1751-V

Goodevening to everyone!
i'm new in the world of router and i need to do a port forward with my router (Cisco 1751-V). i don't know exactly what i must do, but i read at PortForwarding.com that i must login in my router for set the port, but i don't know how to do that!!
also i'm Italian and i have only a little experience with English language!
If someone could help me i'll be very happy of this!!
Thanks in advance!

If you want to configure the router through the Cisco IOS command-line interface (CLI), you must connect the router console port to a terminal or PC. The cable and adapter required for this connection are included with the router.
To configure the router with a PC, the PC must have some type of terminal emulation software installed. The software should be configured with the following parameters: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control. Refer to the Cisco 1700 Router Software Configuration Guide for detailed information about configuring the router using Cisco IOS software.
This link should start you in the right direction:
http://www.cisco.com/en/US/products/hw/routers/ps221/products_installation_guide_chapter09186a0080091694.html#wp1015235
Please rate helpful posts.

Similar Messages

[DW-CS3] Login User passing parameter

Hi. Why this line of code does not work?
$MM_redirectLoginSuccess = "admin/editar.php?id_col=<?php
echo $_GET['id_col']; ?>";
Im trying to create a login user page and i need to send an
url parameter to open an specific page content. The above code is
the variable url to redirect in case of a success login but fails
when i try to send the "id_col" parameter. If i write just the next
line it works fine:
$MM_redirectLoginSuccess = "admin/editar.php";
This is the code generated by the Login User Server Behavior
in DW.
Thanks for help.

geschenk wrote:
> in this case its not a DW issue?
> >>
>
> I´m pretty certain this *is* a DW issue -- we had
exactly this problem with
> the Dreamweaver Developer Toolbox, means if folks had a
"user" table, it even
> completely ruined their Developer Toolbox configuration
file. When crawling
> through DW´s "configuration" files I noticed that
DW is using this very term
> internally all over the place, and to me it seems that
we´re having a naming
> conflict here
Dreamweaver certainly isn't the issue that the OP is
experiencing. Their issue is occurring when they run the page from
the server, that's where the error is occurring.
Danilo Celic
| Extending Knowledge Daily :
http://CommunityMX.com/
| Adobe Community Expert

User License for Cisco CUCM 7.1.3

Hi
I need 30 unit license for Cisco Communication Manager 7.1. But I found that it's already end of sale.
I want the unit license part number for cisco cucm 7.1.3 version.
And i found revised part numbers for user license (CUCM-USR-LIC ) but those for 8,x versions. If i purchase that will it support in CUCM 7.1.3?
Thanks in advance.

Hi,
CUCM 7 is already end of sale.
CUCM 7.1.5 supports UCL.If we refer the ordering guide of CUCM 8.5, you can get UCL licenses [Basic/essential].
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/UC_8_6_OG.pdf
What I think if u place the order , you should get the licenses and at the backened, it would be DLU.
You can also speak to Cisco SE for further clarity.
regds,
aman

Log on user/pass for Oracle8i in SQL

I try all the user/pass that use for Oracle8 is not work for Oracle8i.
Please help.

if you are using a IDoc or Proxy connection to SAP, check the destination. Run the authorization test 5 or more times to see if the user is getting locked or not.
Also can you elaborate your scenario more?

User Guide for Cisco UC Phone 7937

Can anyone supply me with a URL for downloading a basic user's guide for the UC 7937 Phone?

Hello ttrovato 1,
Here are some links where you will be able to find the information about the conference ip phone 7937G.
Administration guide:
Link:http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cuipph/7937g/6_0/english/administration/guide/37adm60.pdf
Phone guide:
Link:http://www.msl.ubc.ca/sites/default/files/cisco-teleconference-phone-userguide.pdf
Latest Firmwares:
Link:https://software.cisco.com/download/release.html?mdfid=281433475&softwareid=282074289&release=1.4%285%29&relind=AVAILABLE&rellifecycle=&reltype=all
Specifications Overview:
Link: http://www.cisco.com/c/en/us/support/collaboration-endpoints/unified-ip-conference-station-7937g/model.html
Enjoy it.
Regards,
Gerson

How to change the default login user id for firefox home?

I need to enter a login id to open a firefox page. Unfortunately, I made an error on the login id. How to change this default login ID to open a Firefox home page?

sheldonidx wrote:
Can this be modified to change the underscore to a period?No.
I'm not sure if this is possible because it looks like the XML refers to compiled Java classes. Correct. A similar request has been discussed before:
http://forums.sun.com/thread.jspa?messageID=10626873#10626873
Regards,
Shane.

User Name and Password for Cisco Prime Infrastructure 2.1

Hi all:
I am stuck at the login page of Cisco Prime Infrastructure 2.1.
I have tried using the user name root and its password (when log in with root at Vsphere Client) and also the login user name "before" get into the appliance infrastructure, all cannot work.
Anybody knows what is the default username or password or any way to set the username and password for this Cisco Prime Infrastructure 2.1 website?
Thanks!
tangsuan

Hi Tangsuan,
Following is the documented procedure for password recovery..
In order to modify the GUI root user password, you will need to login to the NCS CLI
as an admin user, and enter the command
"ncs password root password <new password>" (without the quotes)
This should set the web interface root user password :
http://www.cisco.com/en/US/docs/wireless/ncs/1.1/configuration/guide/manag.html#wp1268889
If you have lost your CLI password , try the default logging that is ,
CLI user is admin and not root, so please try logging in as admin with
the password that was set during setup. If that does not work , you need
the install disk that came with the appliance to recover that password.
Follow these steps:
Recovering a Lost Admin Password
If you lose or forget the admin password for NCS appliance, follow these steps.
Step 1 Reboot the NCS appliance with the ISO DVD inserted. The Cisco Prime Network Control
System Welcome screen appears:
ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin
             Welcome to Cisco Prime Network Control System
To boot from hard disk, press <Enter>.
Available boot options:
   [1] Network Control System Installation (Keyboard/Monitor)
   [2] Network Control System Installation (Serial Console)
   [3] Recover administrator password. (Keyboard/Monitor)
   [4] Recover administrator password. (Serial Console)
<Enter> Boot existing OS from Hard Disk.
Enter boot option and press <return>.
boot:
Step 2 Select the desired recovery option, 3 or 4, depending on how you
are connected to the appliance and then follow the prompts.
Thanks-
Afroz
***Ratings Encourages Contributors ****

FindGroups - Error while getting group list for login user

Hi All,
I am using below code snippet to search a group in OIM but it gives me "Error while getting group list for login user" error message.
tcResultSet rsetAss = null;
tcGroupOperationsIntf groupIntf = (tcGroupOperationsIntf)utilFactory.getUtility("Thor.API.Operations.tcGroupOperationsIntf");
HashMap mapGrp = new HashMap();
mapGrp.put("Groups.Group Name","DEF_GROUP");
rsetAss = groupIntf.findGroups(mapGrp);
And i am ruuning this code using xelsysadm logon.
com.thortech.xl.util.config.ConfigurationClient.ComplexSetting config = ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
Hashtable env = config.getAllSettings();
com.thortech.xl.crypto.tcSignatureMessage moSignature = tcCryptoUtil.sign("xelsysadm", "PrivateKey");
utilFactory = new tcUtilityFactory(env, moSignature);
Any guess?
Thanks & Regards
Inbaa.

Here it is Rajiv,
public class GetUserApprover {
private String defGroup = "DEF_GROUP";
public tcUtilityFactory getUtilFactory()
tcUtilityFactory utilFactory = null;
try
     logger.debug("Initializing the utilFactory");
     com.thortech.xl.util.config.ConfigurationClient.ComplexSetting config = ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
Hashtable env = config.getAllSettings();
com.thortech.xl.crypto.tcSignatureMessage moSignature = tcCryptoUtil.sign("xelsysadm", "PrivateKey");
utilFactory = new tcUtilityFactory(env, moSignature);
catch(Exception ex)
     logger.info("Error while getting the utilFactory" + ex.getMessage());
     System.out.println(ex.getMessage());
return utilFactory;
public String getGroupKey(String defGroup){
          String groupKey = null;
          tcUtilityFactory utilFactory = getUtilFactory();
          if(utilFactory != null)
     System.out.println("utilFactory not null. Searching for group:" +defGroup );
               try
          tcResultSet rsetAss = null;
          tcGroupOperationsIntf groupIntf = (tcGroupOperationsIntf)utilFactory.getUtility("Thor.API.Operations.tcGroupOperationsIntf");
          HashMap mapGrp = new HashMap();
          mapGrp.put("Groups.Group Name","DEF_OWNER_GROUP");
          System.out.println("Finding Group....");
          rsetAss = groupIntf.findGroups(mapGrp);
          System.out.println("RowCount-->" +rsetAss.getRowCount() );
          rsetAss.goToRow(0);
          groupKey = rsetAss.getStringValue("Groups.Key");
     System.out.println("GroupKey-->" + groupKey);
     catch(Exception e){
          System.out.println("Error" + e.getMessage());
          return (java.lang.Object)groupKey;
}

How to hide the Columns and Views for Login user in SharePoint 2013

Hi Friends,
How to hide the Columns and Views for Login user in SharePoint 2013? Is it possible using OOB features? If not possible how can we hide the Columns and Views for Login user?
Could you please help on this.
Thanks,
Tiru
Tiru

Hello Tirupal,
There is no OOB way to do this.
Please check this codeplex solution to achieve the same.
https://sp2013columnpermission.codeplex.com/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.

All Im very new to Oracle DRM and Im trying to get the app setup on Windows server running SQL Server 2008. When I try to login to the Web Client I keep getting this error.
DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.
Can you please help

This might be due to The 'Oracle Instance' path may not have been set to a path relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine) on the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
if this is the case then
1. Open the DRM Configuration Console.
2. Go to the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
3. Ensure that the path in 'Oracle Instance' has been set relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine defined in 'CSS Bridge Host').
4. If corrections are made to 'Oracle Instance' then restart the DRM services to pick up the change.
Thanks,
~KKT~

Postfix/sendmail fatal: no login name found for user ID

We have a xserve setup to host our rails application, but we can't get it to send any emails. Prior to the leopard upgrade it was sending them fine. The mail service is started and running, the settings are basically the default with the hostname and domain name changed, but in the logs we keep getting:
postfix/sendmail[48887]: fatal: no login name found for user ID 501
Ideas?
Thanks,
Steve

A reboot of the system fixes the problem for a few hours but does not solve the issue. I guess I could reboot the machine every couple hours but that sounds more like a m$ solution...
Does anyone think a rebuild of the OD data might help?

Fatal: no login name found for user ID

I have this problem from time to time, when it happens every app running on the box is screwed and I have to reboot. There is a user ID 502, and it start working again immediately after reboot. Any suggestions?
Nov 18 09:44:31 hostname postfix/sendmail[75305]: fatal: no login name found for user ID 502
Nov 18 09:44:31 hostname postfix/sendmail[75310]: fatal: no login name found for user ID 502
Nov 18 09:44:31 hostname postfix/sendmail[75315]: fatal: no login name found for user ID 502
Nov 18 09:44:31 hostname postfix/sendmail[75320]: fatal: no login name found for user ID 502

A reboot of the system fixes the problem for a few hours but does not solve the issue. I guess I could reboot the machine every couple hours but that sounds more like a m$ solution...
Does anyone think a rebuild of the OD data might help?

Using application user for Cisco webdialer (V7.1.3)

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:Standaardtabel;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Hi,
I’m trying to use the Cisco webdialer Servlet to make a central application for making phone call’s. When I’m using an normal enduser, I’m able to make a call without any problems. When the end user is configured with multiple Controlled Devices, I can select one of the phones and make a call.
Because I’m making a central application, I don't like to use an normal enduser (ldap). Therefore I tried to use an ‘application user’. I configured the controlled devices (same phones as the with the normal enduser)and gave the application user permission for the standard CCM end user.
I checked everything, but I’m not able to get any information about the controlled phones. When I use the normal WebDialer http page, the authentication works fine, but I don’t see the any (controlled) phones.
Does anyone know if its possible to use an application user in the WebDialer?
Regards,
Theo

There are two different database tables - applicationuserdevicemap and enduserdevicemap. Those tables store the association relationship between users and devices.
I guess Web Dialer only looks into enduserdevicemap table.
Michael
http://htluo.blogspot.com

Deletion of user if he hasn't login into system for long time

Hi Experts,
can anyone tell me that does acess enforcer provides nay facility of automatic deletion of those users who haven't login into system for long time.
Please suggest.
Thanks & Regards,
Anubha Pandey

Hi Anubha,
no, Access Enforcer is a tool for assigning/removing authorizations via workflows.
Run a regularly report in ABAP to delete the users that haven't logged on.
Regards
Daniela

How to Prompt for User/Pass Running Shell Script Remotely through ARD

So I finally got my Active Directory Script working! However, I realized that I'm not the only one going to be running this script and to have my user name and password in the script itself is beyond foolish. While I know it's possible just to have whoever's running the script to manually add their username and password, I'd prefer to have prompts to make things easier for the rest of my team.
Here's my current script. I've tested it on the machine I'm connecting to Active Directory and it works fine if you run it on the machine itself in terminal. However, I'm going to be doing this on about 150 machines and the whole point of the script is to do it remotely.
#! /bin/bash
MACNAME=$(scutil --get ComputerName)
read -p "User Name: " USER
read -p "Password for $USER: " PASS
dsconfigad -add "CORP.DOMAIN.NET" \
-username $USER \
-password $PASS \
-computer $MACNAME \
-mobile disable \
-mobileconfirm disable \
-localhome enable \
-useuncpath enable \
-shell /bin/bash \
-ou OU=Macs,CN=Computers,DC=corp,DC=DOMAIN,DC=net \
-force \
-localpassword "PASSWORD" \
-groups "GROUPS"
When I run the UNIX script through ARD to a machine, I get no prompts for USER or PASS. In fact, it gives me the following error "dsconfigad: Authentication server encountered an error while attempting the requested operation. (5202)" So it's not asking for a user name and password.
Is there any way to make a shell script prompt you for a User Name and Password when you're sending commands remotely through ARD? Or is there another way to do this?
Any suggestions would be greatly appreciated.
-rks

Best solution is to create an account that is exclusive to binding machines. By doing this, you can embed the user name and password in the script. Heck, you can post it on your website. If the account is configured properly, it will only be able to create machine records in a defined container. If you are mixing Macs and PCs in your AD domain, I also recommend creating an isolated container for your Mac records. Now, the account has even less access rights as you can make it so it only has rights to the Mac container.
Otherwise, ARD does not prompt. You can play around with an expect script but the reality is that you are still embedding the credentials in the script so it really does not achieve what you want. ARD is not an interactive shell scripting tool. It is more a fire and forget.
Reid
Apple Consultants Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

Login user/pass for Cisco 1751-V

Similar Messages

Maybe you are looking for