Login User with Dynamic Redirect
Hi,
I have used the "Login User with Dynamic Redirect" with asp
VBScript. But
now I´m going to make a PHP/MySql site.
Does anybody know of a extension that can make dynamic
redirection from
logon page.??
/mike.
Michael wrote:
> I have used the "Login User with Dynamic Redirect" with
asp VBScript. But
> now I�m going to make a PHP/MySql site.
> Does anybody know of a extension that can make dynamic
redirection from
> logon page.??
You don't need an extension. The built-in Log In User server
behavior
does it.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/
Similar Messages
-
We have several 2008R2 Terminal Servers with roughly 40 users working on each of them. Everytime a user logs on or off with printer redirection enabled in his RDP client (we use the Easy print feature), all other users experience a freeze of
10 seconds on that server. Needless to say, this behaviour of the server is not acceptable. We searched all of Google and implemented and tested every proposed solution, including the registry additions to the lanman part but all with no effect. Can anyone
provide us with a possible solution? It would be immensely appreciated!Hi,
Thank you for your posting in Windows Server Forum.
Once user is successfully log on, can able to print the document easily?
Which version of client OS & RDP using for your environment?
Initially I would like you to try installing latest RDP 8.1 if you are using Windows 7 and if using Windows XP then please use RDP 7. In addition check .Net Framework 3.5 or higher installed. Apart as Bruno suggested, please check the latest driver installed
on RDS server. Also check the Event log for any information. For more detail, refer below article.
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx
Hope it helps!
Thanks,
Dharmesh -
How to find login user with the largest account
Hello. I'm looking to put together a bash script that can do two things: (1) determine the shortname of the user with the largest account in /Users and (2) look up their full/long name. I'm going to use this script to help identify who the user on a computer and while I know that's possible that a sometime-user may have a larger account than the normal-user on any given computer, the results of a script should be sufficient in most cases for my needs.
I'm not sure the best way to around this. I know that I can use "du -m -d1 /Users" as root:
root on torchwood
[ ~ ]$ du -m -d1 /Users
157 /Users/admin
128 /Users/johndoe
70890 /Users/dancollins
21746 /Users/Shared
92920 /Users
I know that I can also use "dscacheutil -q user" to get a full list of all users on a system.
How can I get both the short and long name of the user with the largest account in the /Users folder?We're running JAMF Recon for inventory and my supervisor wants to create a report that lists the primary user of the Mac... assuming that the largest user account may be the primary user. In this case, disk space is not the issue, the top admins simply would like to be able to associate names with individual machines. This isn't the most elegant way to do it and it's not fool-proof, but it'll be correct more often than not, which they're satisfied with.
Can I ask one more question? Using your script, I've started testing with one building and on a number of Mac, the "admin" (shortname) account is turning out to be the largest account. Is there a way to exclude the admin account from consideration?
Thanks... -
How do i setup multiple pc login users with separate iclouds
Have one PC with separate user logins for me and the wife. Successfully set up icloud for me, but am at a loss on how to continue to get icloud set up for the second pc user. No setup to run anymore, because it was installed with the first user. Cannot integrate outlook this way. Anybody know?
Guess I figured it out. I was a matter of finding the icloud.exe executable in the program files (it did not show under the start menu). Setup for the second user went without a hitch. 2 PC profiles, 2 apple IDs, 2 calendars in iCloud. Now i just need to find the way to see my wife's iCloud calendar on my iPhone, (as a separate calendar).
-
Link XCM login user with R/3 Customer
Hi All,
I have recently configured XCM for using SAP R/3 ECC 6.00 catalog functionality.
I am using the SAP R/3 user for logging on to XCM Portal.
When I add items to shopping cart, it states no customer found.
How can I link the User ID to respective Customer in SAP R/3.
Secondly the price as available in catalog is 0.00 USD though I gave maintained the necessary conditions in R/3. When I created the catalog in SAP R/3 and under layout added items, there also it shows the price as 0.00 USD. But if I create a sales order manually in R/3 system picks the correct price which for PR00 has been maintained as 100 USD.
Looking forward to an early reply.
Rgds,
RajeevHi Rajeev,
You can connect your SU01 user id to Customer. Su01 User id is through which you are log in to ISA.
from SAP R3 got to SU01 Tcode
from SU01screen click on "Go To--> Reference"
In Reference screen you have to provide three value "Obj. Type", "Name" and "Key"
This is contact person information.
For example
Obj. Type = BUS1006001
Name = Bus. partner employee
Key = XXXXX
In the customer detail (VD0X) you have to maintain contact person data. Click on "General Data" button and click on last tab "Contact person" here you have to maintain Contact person for this customer.
You can create contact person by Tcode VAP1, VAP2- Change, VAP3- Display.
So link from SU01 to Customer is line
SU01-->Contact person --> Customer.
About your price issue.
Can you check you shopadmin data. If you are using IPC then you have to select IPC in your shop admin.
I hope this will help you to resolve your problem.
Regards.
eCommerce Developer. -
1. I updated app-v 5.0 sp3 environment on 2012 R2. Roaming profile users with folder redirection logon fine at first time applications icons available but at 2nd logon applicaitons icons are missed while packages are available. we are using existing
roaming profiles with folder redirection which are running in current environment through APP-V 4.6 2008 R2. Please suggest work around to resolve this issue.
2. TS Nodes of 2008 R2 with App-v 4.6 running fine on Microsoft 2012 private cloud but we are facing performance issue (stuck, slow logon, slow performance etc) when we are moving in new 2012 R2 private cloud. SAP, SCSM and other sevices are running
fine, please provide solution.
Thanks1.) What are you doing with the App-V Icon path? e.g. %LOCALAPPDATA%\Microsoft\AppV\Client\Integration\<GUID>\Root\AppVClientUX.exe.0.ico ?
I guess you could workaround it with deploying the icons to a central location and then pointing to the icon out on a central share. Or put the icons in a machine location...I haven't had this issue but that's just off the top of my head.
2.) I have not used App-V 4.6 in an environment like yours BUT would pre-caching the applications be possible? Any chance you'll be moving those apps into App-V 5.0 soon?
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon -
Dynamic redirect on successfull login
ok i have got the normal priviledge login working great but
what i would like to do is this..
i am using mysql/php and running on a test server win xp
using the phpdev server setup from firepages all working perfectly.
User table consists of several rows but the main one in
question contains a field called start_page with a url in the form
of /subdirectory/urlname.php this is a subdirectory of the
directory holding the login page.
what i would like to do is using the login behaviour if
possible redirect the customer (2 types) or admin to their own
start page (contained in the start_page field in the database
record).
i have tried using the parameter settings in login behaviour
to dynamically set the url from the record set (record set contains
the username password and start_page) however this just throws up
an error in the code.
the reason i want to do this is to eliminate the need for 3
separate forms to login each user type (which would work as i have
it that way now) however i would prefer to process the one login
form with the behaviour and dynamically redirect to the correct
start_page based on the record value..
ps i am ok with adapting code to a certain extent but am in
the process of getting to grips with php (normal asp coder)
thanks for your help in advance. these forums are a goldmine
tomSorry don't know PHP but in ASP I would add an 'access_group'
column in my db. On the login page I would then script the page to
allow username and password access to the start page and show items
depending on 'access_group' leve.
Perhaps something like:
<% If Session(""MM_UserAuthorisation") = "customer_type1"
Then %>
Redirect script or HTML to show appropriate information would
go here.
<% End If %>
Hope this is of some help. Forgive me it may not be the best
solution but along the lines of what I would try doing.
Jules -
How do I redirect a secure zone login form with javascript?
I would like to redirect what page a user goes to after filling out the secure log in form. I would change the landing page of the secure zone, but I need a log in form to go to a different page of the site. I would also create a seperate secure zone, but I have almost 3000 subscribers and it would be very time consuming to add all those users to this new zone.
I would like to redirect the user (using the form from a secure zone) to a different page other than the landing page of the log in form. How do I do this with javascript?
I saw this page: http://kb.worldsecuresystems.com/598/bc_598.html#main_Logging_into_different_Secure_Zones_ according_to_ID_number but couldn't make sense of it for my current situation. (I don't need multiple zones, just the form to redirect to a different page after submission)
<form action="https://redlakewalleye.worldsecuresystems.com/ZoneProcess.aspx?ZoneID=12369&Referrer={module_siteUrl,true,true}&OID={module_oid}&OTYPE={module_otype}" method="post" onSubmit="return checkWholeForm52938(this)" name="catseczoneform52938">
<div class="form">
<div class="item"><label for="SZUsername">Username</label><br />
<input type="text" maxlength="255" id="SZUsername" name="Username" class="cat_textbox_small" /></div>
<div class="item"><label for="SZPassword">Password</label><br />
<input type="password" autocomplete="off" maxlength="255" id="SZPassword" name="Password" class="cat_textbox_small" /></div>
<div class="item"><input type="checkbox" id="RememberMe" name="RememberMe" /><label for="RememberMe">Remember Me</label></div>
<div class="item"><input type="submit" value="Log in" class="cat_button" /> <a href="/_System/SystemPages/PasswordRetrieveRequest">Lost password?</a></div>
</div>
<script type="text/javascript" src="/CatalystScripts/ValidationFunctions.js"></script>
<script type="text/javascript">
//<![CDATA[
function checkWholeForm52938(theForm){
var why = "";
if (theForm.Username) why += isEmpty(theForm.Username.value, "Username");
if (theForm.Password) why += isEmpty(theForm.Password.value, "Password");
if (why != ""){alert(why);
return false;
// Add the redirect code here?
theForm.submit();
return false;
//]]>
</script>
</form>I've been working on the same thing and have nearly solved it with these tutorials:
http://www.bcgurus.com/tutorials/re-directing-users-to-the-correct-secure-zone
http://www.bcgurus.com/tutorials/building-a-better-secure-zone-login-page
The first tutorial will let a person continue on to the page he/she was attempting to access. For example, if your site offers learning lessons in a secure zone... A visitor could click on a lesson, get prompted to login and then be redirected to that particular lesson instead of the landing page for the secure zone. The script in the tutorial also accommodates general logging in: "if the person wasn't going somewhere specific then send him/her here (landing page, user account, whatever).
Might be worth checking out the free BCGurus trial or joining for a month.
Brian -
Site Login Behavior For SharePoint Foundation 2013 Users With Expired Passwords?
What are the most user-friendly ways of getting external users with expired AD passwords back into the SharePoint site with a new working password?
We already send automated email notifications to users reminding them to change their soon-to-expire passwords. However, sometimes they miss seeing the email notifications before the password expires (such as after returning from vacation or just carelessness
and lack of attention to email messages) or they see the warning messages and forget to act on it.
When this happens and they try to log into the SharePoint site from the Internet, their login fails without telling the user the reason they can't log in is because their password expired. So, they end up confused and call the help desk to get their
password reset.
Is there a way to set up SharePoint Foundation 2013 login in a similar way to the OWA login so that, when a user with a correct but expired password tries to log in, it gives them a prompt to set a new password right there rather than just an error indicating
their login failed for unknown reasons or password is "incorrect?"It could be done. You get a different event log entry for an expired login attempt than for a wrong password, 4625 events denote a login failure and an error ID of 23 denotes a logon failure.
A naff, but simple, approach would be to create a tool that checks your server logon event log for 4625 entries and then emails that user, or the help desk, or security, that they're trying to get onto your system with expired credentials.
For a more polished experience you've got a lot more work and bluntly it's going to be impractical for you. You'd have to re-write sections of the SharePoint authentication process or intercept the process, both are risky and not a good idea to try.
There's a really interesting paper here that might be of interest, it won't help you in your current situation but it might shed more light on the overall authentication/authorisation process.
http://www.sans.org/reading-room/whitepapers/forensics/windows-logon-forensics-34132 -
Netboot logins conflict with real users - can I change the range?
I'm starting to try to get Netboot/Netinstall up and working.
I notice that it has gone and set up a bunch of logins like netboot101, netboot102, etc. using UID 101, 102, etc.
The only problem is that we already have real users with these UIDs, as we have consistent UIDs across our company.
Is there any way to tell the Netboot server to create its logins using a different range of UIDs?OK, let's back up here... What is your source for creating these NetBoot images? The network accounts with the conflicting UID's?
Where are you seeing "netboot101, netboot102"? In Library/NetBoot/NetBootClients0? To the best of my knowledge, the only way to generate a name anything close to "netboot101" is to enable the "Diskless" checkbox on the server for the image in Server Admin. This causes the client to use the server for storing its shadowfile, rather than storing it locally. -
I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?
Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.) -
How to create user editable Crystal Report with dynamic dataset
What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?
-
Login window hides user with UID 1000
I had to change my primary user's UniqueID to 1000 to access NFS shares on a linux box.
Ever since then the account became "hidden" in the sense that regardless of the login window's option of "show list of users" I can only log in by selecting the "Other" option and supplying the username+password.
I have researched extensively and some people over different forums reported this behaviour as well specific to UID 1000. Nevertheless this "feature" is absolutely undocumented.
Would anyone know of a plist option that puts this user back to the login screen list?
I suppose alternatively I could change the UID back to 501 on both the Mac and the linux box so they'd be in sync...Thanks for the responce.
I realize that I need to chown some user specific folderes and files. I also did that on my current system.
Nevertheless...some thinges are still not working properly. I belive im not quite there yet.
I would like to know how to do this the simple but correct way....in LION
I think its a bit overkill to use your scripts, due to all the LDAP stuff.
There must be a specific way to add users with specific UID on LION on a single OSX installation.
I have found lots of halv way there solutions on the net..but would realy like to see something more official!
I kind of made a workaround with my NFS share on my linux sever, using a special way to mount them avoiding hte UID problems.
On the linux box in etc/exports...i export the NFS share linke this.
/media/RAID5/xxxx *(rw,async,no_subtree_check,insecure,anonuid=1000,anongid=1000,all_squash)
And ...in Finder...on the mac ...i right click and "Connect to server" like this
nfs://xxxIPxxxxx/media/RAID5/xxxx
xxxx= some folder do share.
All my linux users are as standard UID 1000, but if anyone with a drifferent UID mounts the nfs share ...they are regarded as uid 1000 in any case avoidnig file premission conflicts.
NFS is not the only reason I would like to use same UID on all systems.
Sharing files on harddisks, and dualboot systems with linux/osx are another reason.
Linux has read/write to HFS+ if not journaled..!!
(I know this is more info than needed, but if someone else reads this...having NFS issues..thay may pick up some idears ;o) -
Unable to login @ login window with Active Directory User
I successfully bound my test machine to Active Directory and can search using dscl and id. I can also su to my active directory user account an authenticate perfectly. All search bases are correct and everything else looks fine.
When I attempt to login from the login window as an AD user, the window shakes. Clicking under Mac OS X shows that "Network Accounts Available". Looks like the CLI tool "dirt" is now gone as well, although insecure it would possibly show something here.
Anyone else having issues after binding to AD? I bound using the Directory Utility gui... I have not tried using my leopard bind script yet.
Thanks,
KenI have pretty well the same problem. The machine was already bound to AD prior to upgrade. After could not login on with my account (jball). Can log on with other accounts from the same domain (we only have one AD domain). Can also su to jball in a terminal session. Can't access network resources with jball when I try to connect to a windows server through the finder, instantly comes up with bad username or password, doesn't even think about it.
I have removed any copies of the home folder under either /Users or /Domain as I have had problems with that before. Have repaired permissions and unbind and bind the machine to AD. Have been at this all day now and no closer. Get these error messages in console:
31/08/09 4:49:27 PM SecurityAgent[666] Could not get the user record for 'jball@domainname' from Directory Services
31/08/09 4:49:27 PM SecurityAgent[666] User info context values set for jball@domainname
31/08/09 4:49:27 PM SecurityAgent[666] unknown-user (jball@domainname) login attempt PASSED for auditing -
OEM 11g login error with sys user.
I have two database in my local host. one is created with dbca and another is manually created.
i am not able to login ONLY with "sys" user in OEM 11g but i can login in sqlplus with the same user(only in database created manually ).yes m giving correct pwd as i mentioned i am bale to login with the same in sqlplus . below is the log details :
C:\Users\jatrived>emca -deconfig dbcontrol db
STARTED EMCA at Apr 25, 2013 12:33:20 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: cgdb
Do you wish to continue? [yes(Y)/no(N)]: y
Apr 25, 2013 12:33:29 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\cfgtoollogs\emca\cgdb\emca_2013_04_25_12_33_19.log.
Apr 25, 2013 12:33:30 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 25, 2013 12:34:12 PM
C:\Users\jatrived>emca -config dbcontrol db
STARTED EMCA at Apr 25, 2013 12:34:29 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: cgdb
Listener port number: 1521
Listener ORACLE_HOME [ D:\oracle\product\11.2.0\dbhome_1 ]:
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Password for SYSMAN user: Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\11.2.0\dbhome_1
Local hostname ................ ***********.corp.****.com
Listener ORACLE_HOME ................ D:\oracle\product\11.2.0\dbhome_1
Listener port number ................ 1521
Database SID ................ cgdb
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: y
Apr 25, 2013 12:35:12 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\cfgtoollogs\emca\cgdb\emca_2013_04_25_12_34_29.log.
Apr 25, 2013 12:35:16 PM oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
Apr 25, 2013 12:36:26 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
Apr 25, 2013 12:36:33 PM oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: Software library is already configured.
Apr 25, 2013 12:36:33 PM oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: EM_SWLIB_STAGE_LOC (value) will be ignored.
Apr 25, 2013 12:36:33 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Deploying Provisioning archives ...
Apr 25, 2013 12:37:29 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Provisioning archives deployed successfully.
Apr 25, 2013 12:37:29 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Securing Database Control (this may take a while) ...
Apr 25, 2013 12:37:36 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Apr 25, 2013 12:37:37 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Apr 25, 2013 12:38:23 PM oracle.sysman.emcp.EMDBPostConfig performConfiguration
INFO: Database Control started successfully
Apr 25, 2013 12:38:23 PM oracle.sysman.emcp.EMDBPostConfig performConfiguration
INFO: >>>>>>>>>>> The Database Control URL is https://***********.corp.****.com:5500/em <<<<<<<<<<<
Apr 25, 2013 12:38:25 PM oracle.sysman.emcp.EMDBPostConfig invoke
WARNING:
************************ WARNING ************************
Management Repository has been placed in secure mode wherein Enterprise Manager data will be encrypted. The encryption key has been pl
aced in the file: D:/oracle/product/11.2.0/dbhome_1/***********.corp.****.com_cgdb/sysman/config/emkey.ora. Please ensure this f
ile is backed up as the encrypted data will become unusable if this file is lost.
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 25, 2013 12:38:25 PM
portlist details :
here now two db having same port , how to remove or change ?
D:\oracle\product\11.2.0\dbhome_1\install>more portlist.ini
Enterprise Manager Console HTTP Port (ORA10) = 5500
Enterprise Manager Agent Port (ORA10) = 1830
Enterprise Manager Console HTTP Port (jai) = 1158
Enterprise Manager Agent Port (jai) = 3938
Enterprise Manager Console HTTP Port (test) = 1158
Enterprise Manager Agent Port (test) = 1830
Enterprise Manager Console HTTP Port (cgdb) = 5500
Enterprise Manager Agent Port (cgdb) = 1831
Maybe you are looking for
-
Using DVI - HDMI cable output to Samsung LCD TV
For some reason, i have been using the DVI -> VGA Adapter with a VGA cable outputted to my new Samsung LCD TV, with resolution 1920x1080. I purchased a DVI -> HDMI Cable, but the quality/resolution is subpar to using the VGA Cable, it seems as if the
-
Repeating error message in console
I keep getting this error message in my console. I have an error for every minute of the day my mac is on and it's this same one. Wondering now if this is what could have bee causing my mac to run slowly recently. FolderManager: Failed looking up use
-
Downloaded trial ok but can't open?
Hi, I sucessfully downloaded ps cs6 trial version to my external hard drive but now can't find how to start program? There are plenty of folders and subfolders...listed under photoshop CS6 folder but I can't seem to find the .exe file to start up? Ha
-
Hi, I started having this problem yesterday. Basically OS X hangs "windows style". It means that the cursor stops responding, everything freezes... keyboard does nothing... trackpad does nothing.. mouse does nothing. Have to hold the power button dow
-
I have numbers 3.2.2 and running OSX Mavericks I need to open a file emailed to me but unable to- I get the message "To open it, save it with numbers 09 first" I don't have numbers 09 on my macbook pro. Any ideas?? Should have stuck with pc/ microsof