Login via Basic Auth popup

Hi, i have sap fiori running and i need GBAPP_PRAPPROVAL service to display basic authentication prompt.
Currently i have configured global settings to use the class CL_SRA_LOGIN.
I modified the system logon on the Error Page tab and i am able to display the login page that says "via popup" in the textboxes and then click to show the popup but i don't want the page to appear at all, i want only the http basic auth popup directly when you access the url of the service. How can i achieve this?
Thanks!
Andres

Could you please paste a screenshot about what would you like to achieve?

Similar Messages

Browser: Basic Auth login/password dialog has no "Remember Me" box, Browser re-requests password on every app restart

Hi
I'm new to BlackBerry and am at a loss how to solve this. Having to re-type Basic Auth l/p info *every* time after you restart Browser app just doesn't seem real in year 2013. Am I missing something obvious here?

Here is the image above reposted - jpeg
A new image that is png. Hope this helps

Auto login with web auth?

I have a guest WLAN on a mobility anchor that uses web auth for access. There is a small set of local users, but the majority of the auth comes from a Radius server. Question is, can I setup some type of policy that will auto login users based on MAC address so they don't have to web authenticate?
Thanks!
Edit: I have seen where you can enable mac filtering on the WLAN and specify individual mac addresses to permit. This would work, but I still want web auth for the majority of users. Only a few users should be automatically connected. The rest should still authenticate via web auth.

Well I have some fantastic news.... and then some horrible news at the same time...
In 7.0.116.0 a new feature was introduced called web auth on mac-filter failure. Basically it does exactly what I think you are asking. Right? You mac filter your wlan, and then if anyone fails the mac filter, they can web authenticate.
Unfortunately, it doesn't work in an Anchored scenario as the Mac filter is L2 performed on the Foreign WLC, and the Anchor does L3 with no knowledge the Foreign was good to bypass webauth.... CSCts54424 is tracking this behavior for Anchor scenario, but I don't think it is planned to go into 7.0......

Basic auth in proxy server breaks managed server form auth

Hi,
I have a proxy server configured in front of 2 managed servers.
The managed servers have secure pages and are using form auth and the
proxy server is working properly. In other words, I point my browser
at the proxy and I end up being services by one of the managed servers.
If I attempt to access a secure page via the proxy I am sent to the form
login page via the proxy.
Now for the problem:
If I configure the proxy server to use basic auth, and secure all
pages in the proxy, I must provide my userid/password to the proxy
server (this is working fine) before I can get to one of the managed
servers. I can get to the welcome page of the managed server (which is
not secure) There is a link to a secure page on the welcome page. When
I click on the link to the secure page, I am sent to the form auth by
the managed server. I authenticate, but I can never see the secure
page. I end up being redirected to the form login page endlessly.
Both the proxy server and the managed server are usign the default
JSESSIONID.
Here is a section of the web.xml for the proxy server:
<servlet>
<servlet-name>HttpClusterServlet</servlet-name>
<servlet-class>weblogic.servlet.proxy.HttpClusterServlet</servlet-class>
<init-param>
<param-name>WebLogicCluster</param-name>
<param-value>${ProxyConfig}</param-value>
</init-param>
<init-param>
<param-name>SecureProxy</param-name>
<param-value>ON</param-value>
</init-param>
<init-param>
<param-name>Debug</param-name>
<param-value>ON</param-value>
</init-param>
<init-param>
<param-name>DebugConfigInfo</param-name>
<param-value>ON</param-value>
</init-param>
<init-param>
<param-name>CookieName</param-name>
<param-value>JSESSIONID</param-value>
</init-param>
<init-param>
<param-name>CookieName</param-name>
<param-value>wlauthcookie_</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>HttpClusterServlet</servlet-name>
<url-pattern>gcmgui/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HttpClusterServlet</servlet-name>
<url-pattern>applauncher/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HttpClusterServlet</servlet-name>
<url-pattern>ssoadmin/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HttpClusterServlet</servlet-name>
<url-pattern>default/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HttpClusterServlet</servlet-name>
<url-pattern>domainadmin/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HttpClusterServlet</servlet-name>
<url-pattern>gsc/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HttpClusterServlet</servlet-name>
<url-pattern>psr/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HttpClusterServlet</servlet-name>
<url-pattern>broadcastclient/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HttpClusterServlet</servlet-name>
<url-pattern>nra/*</url-pattern>
</servlet-mapping>
Here is the proxy debug:
<Fri Jul 11 14:40:07 EDT 2003>: ===New Request===GET
/applauncher/jsp/AppLaunche
r.jsp HTTP/1.1
<Fri Jul 11 14:40:07 EDT 2003>: Found cookie: Sf4VoFtpQwG]dTNEh9Yq
<Fri Jul 11 14:40:07 EDT 2003>: #### Trying to connect with server
-213061352!10
.68.10.87!1080!10443
<Fri Jul 11 14:40:07 EDT 2003>: Remove idle for '30' secs:
ProxyConnection(isSec
ureProxy=true): 10.68.10.87:10443, keep-alive='30'secs
<Fri Jul 11 14:40:07 EDT 2003>: Create connection:
ProxyConnection(isSecureProxy
=true): 10.68.10.87:10443, keep-alive='30'secs
<Fri Jul 11 14:40:07 EDT 2003>: In-bound headers:
<Fri Jul 11 14:40:07 EDT 2003>: Accept: image/gif, image/x-xbitmap,
image/jpeg,
image/pjpeg, application/vnd.ms-excel, application/msword,
application/vnd.ms-po
werpoint, */*
<Fri Jul 11 14:40:07 EDT 2003>: Accept-Language: en-us
<Fri Jul 11 14:40:07 EDT 2003>: Accept-Encoding: gzip, deflate
<Fri Jul 11 14:40:07 EDT 2003>: User-Agent: Mozilla/4.0 (compatible;
MSIE 6.0; W
indows NT 4.0; H010818)
<Fri Jul 11 14:40:07 EDT 2003>: Host: localhost:18002
<Fri Jul 11 14:40:07 EDT 2003>: Connection: Keep-Alive
<Fri Jul 11 14:40:07 EDT 2003>: Cookie:
JSESSIONID=1PEosMJQ9ZJrewjj1t5nZfNtYe1e5
pWYbjyBGvZ1ExEY8YoueKTG!-213061352!NONE;
wlauthcookie_=Sf4VoFtpQwG]dTNEh9Yq
<Fri Jul 11 14:40:07 EDT 2003>: Authorization: Basic
cmFwcGVsYmE6b3V0Mmx1bmNo
<Fri Jul 11 14:40:07 EDT 2003>: HTTP/1.1 302 Moved Temporarily
<Fri Jul 11 14:40:07 EDT 2003>: Out-bound headers:
<Fri Jul 11 14:40:07 EDT 2003>: Date: Fri, 11 Jul 2003 18:40:07 GMT
<Fri Jul 11 14:40:07 EDT 2003>: Location:
https://localhost:18002/applauncher/un
restricted/jsp/FormLogin.jsp
<Fri Jul 11 14:40:07 EDT 2003>: Server: WebLogic WebLogic Server 8.1
Thu Mar 20
23:06:05 PST 2003 246620
<Fri Jul 11 14:40:07 EDT 2003>: Transfer-Encoding: Chunked
<Fri Jul 11 14:40:07 EDT 2003>: ===New Request===GET
/applauncher/unrestricted/j
sp/FormLogin.jsp HTTP/1.1
<Fri Jul 11 14:40:07 EDT 2003>: Found cookie: UZ]OrXsBP6uEEa[0veSz
<Fri Jul 11 14:40:07 EDT 2003>: Request successfully processed
<Fri Jul 11 14:40:07 EDT 2003>: #### Trying to connect with server
-213061352!10
.68.10.87!1080!10443
<Fri Jul 11 14:40:07 EDT 2003>: Requeue connection:
ProxyConnection(isSecureProx
y=true): 10.68.10.87:10443, keep-alive='30'secs
<Fri Jul 11 14:40:07 EDT 2003>: Recycle connection:
ProxyConnection(isSecureProx
y=true): 10.68.10.87:10443, keep-alive='30'secs
<Fri Jul 11 14:40:07 EDT 2003>: Request successfully processed
<Fri Jul 11 14:40:07 EDT 2003>: In-bound headers:
<Fri Jul 11 14:40:07 EDT 2003>: Accept: image/gif, image/x-xbitmap,
image/jpeg,
image/pjpeg, application/vnd.ms-excel, application/msword,
application/vnd.ms-po
werpoint, */*
<Fri Jul 11 14:40:07 EDT 2003>: Accept-Language: en-us
<Fri Jul 11 14:40:07 EDT 2003>: Accept-Encoding: gzip, deflate
<Fri Jul 11 14:40:07 EDT 2003>: User-Agent: Mozilla/4.0 (compatible;
MSIE 6.0; W
indows NT 4.0; H010818)
<Fri Jul 11 14:40:08 EDT 2003>: Host: localhost:18002
<Fri Jul 11 14:40:08 EDT 2003>: Connection: Keep-Alive
<Fri Jul 11 14:40:08 EDT 2003>: Authorization: Basic
cmFwcGVsYmE6b3V0Mmx1bmNo
<Fri Jul 11 14:40:08 EDT 2003>: Cookie:
JSESSIONID=1PEHvo1gQIbwOMuVsU9pJnnvlGBSP
74ZUcSHwazE7domCL8UlVA2!-937872307; wlauthcookie_=UZ]OrXsBP6uEEa[0veSz
<Fri Jul 11 14:40:08 EDT 2003>: HTTP/1.1 200 OK
<Fri Jul 11 14:40:08 EDT 2003>: Out-bound headers:
<Fri Jul 11 14:40:08 EDT 2003>: Date: Fri, 11 Jul 2003 18:40:08 GMT
<Fri Jul 11 14:40:08 EDT 2003>: Server: WebLogic WebLogic Server 8.1
Thu Mar 20
23:06:05 PST 2003 246620
<Fri Jul 11 14:40:08 EDT 2003>: Content-Length: 4238
<Fri Jul 11 14:40:08 EDT 2003>: Set-Cookie:
JSESSIONID=1PEIxJ21oT5H3Z2ilQjPqpq1V
kdOhEnNbbz9wviTtTTZj6IBp29b!-213061352!NONE; path=/
<Fri Jul 11 14:40:08 EDT 2003>: Request successfully processed
<Fri Jul 11 14:40:08 EDT 2003>: Requeue connection:
ProxyConnection(isSecureProx
y=true): 10.68.10.87:10443, keep-alive='30'secs
<Fri Jul 11 14:40:08 EDT 2003>: Request successfully processed
<Fri Jul 11 14:40:44 EDT 2003>: Trigger remove idle for '35' secs:
ProxyConnecti
on(isSecureProxy=true): 10.68.10.87:10443, keep-alive='30'secs
Thanks,
Rob

I typically have used Apache Commons HttpClient for anything but trivial URL connections, and especially when combining both basic auth and proxy auth. When you use it, be aware of the "preemptive authentication" flag. One server I worked with didn't send the correct parameters back on particular requests, so I had to turn on this flag to get it to work.

LDAP Basic Auth with IAS6.0SP2

Hi, has anyone been able to get this working? I can't find much documentation on it.
My web.xml has:
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>myrealm</realm-name>
</login-config>
<security-constraint>
<web-resource-collection>
<web-resource-name>myresource</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>myrole</role-name>
</auth-constraint>
</security-constraint>
but I don't know what (if anything) I should put in the ias-web.xml.
I've added my LDAP server to the configuration of the application server - but so far it doesn't even popup the authenication dialog box.
Any clues?

Hi, has anyone been able to get this working? I can't find much documentation on it.
My web.xml has:
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>myrealm</realm-name>
</login-config>
<security-constraint>
<web-resource-collection>
<web-resource-name>myresource</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>myrole</role-name>
</auth-constraint>
</security-constraint>
but I don't know what (if anything) I should put in the ias-web.xml.
I've added my LDAP server to the configuration of the application server - but so far it doesn't even popup the authenication dialog box.
Any clues?

Fiori Launchpad - Basic authentication popup

Hi,
I have used the std. class /UI2/CL_SRA_LOGIN for Fiori launchpad log in screen. When there is no user action for long time and the session cookie gets expired; any operation performed(like selecting an app) in this case is bringing a browser basic authentication popup.
How to avoid this by either taking the user to initial login screen instead of the authentication popup ?
Tags edited by: Michael Appleby

Hi Aakash,
Please upload the screenshot. Is it critical issue or just a nice to have?
From end user point of view, I prefer popup because I can continue the work from the last point. The best is IT sets up SSO.
Regards, Masa
SAP Customer Experience Group - CEG

Basic auth interop problem, servlet WS works, EJB WS not (Sun AS 8)

After spending some time I managed to add HTTP basic auth to a simple web service. I have implemented two variants, an JAX-RPC servlet web service and an EJB web service.
A (Sun) JAX-RPC client works pretty well against both web services. I do the required steps with the stub (set user/pwd) and things work. I do get the correct principal in the server side, fine.
When I do NOT set the authentication properties at the stub, the servlet based WS responds something like HTTP error 403 (?) or so, which leads to "authentication required". The EJB based response is not that adequate, it's something like "internal server error, EJBLocalAccessException or so" but from the given message you could get the idea what's wrong.
Anyway, I got the impression that this stuff
return HTTP error to flag "auth required"
is not happening for some reason in my EJB based web service. I found this problem in Sun AS 8 and I think it's the same problem when I test stuff with Oracle's OC4J ...
Some client implementations have obviously problems to get the idea that user authentication is required. In other words, the clients cannot invoke the EJB WS. I tried it with Perl Soap::Lite, MS SOAP Toolkit 3.0 and MS .Net 1.1 stuff. All this clients work well (with authentication) when I consume the servlet based web service. But the EJB based web service is not working at all. I do get there just "not allowed" and the SOAP client runtime is not handing over any user credentials (because it's obviously not correctly asked for it by an appropriate AS response).
Anyone else experienced this problems with EJB WS???
Interesting question: why is the JAX-RPC client working? Is it sending the properties set at the stub in any case? Or do they "handle" the internal error coming from Sun AS explicitly or so? Strange, in a way. :-)
Thanx for any help here!
Merten

I guess the reason was that I wrote
<login-config>
<auth-method>Basic</auth-method>
</login-config>
instead of required
<login-config>
<auth-method>BASIC</auth-method>
</login-config>
At deploy time, I got no error message. At usage time, I just got this AccessLocalException. That's not really nice ...
Merten

Basic auth with RESTful WEb service and Web Service reference

Hi, All,
We have made much progress on getting an application working wtih RESTful web services but now are trying to figure out how to lock down a RESTful Web service while making it available for a particular application.
We are using one of the sample 'emp' table web services that come with Apex 4.2 and are trying to apply Basic Auth to the WEb Service via Weblogic filter defined in the web.xml file. That works fine. I now get challenged when I try to go to :
https://wlogic.edu/apex/bnr/ace/hr/empinfo/
And when I authenticate to that challenge I am able to get the data. (we are usiing LDAP authentication at the Weblogic level)
However, I am not sure how to get same basic authentication to work with the Web Service reference in my application. I see the error message in the application when I try to call that Web Service:
401--Unauthorized<
And I see:
"The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials"
How do I provide the credentials in the Web REference or do I provide credentials in the Application?
Web service works fine if I remove the RESTful web service basic auth from the Web.xml file.
Should we NOT use Weblogic basic auth and instead use basic auth from Workspace RESTful web service definition. If so, how do we implement THAT basic auth in the Web Service definition and in the Web SErvice Reference on the application?
Thanks,
Pat

What I mean is diid you try to use the PL/SQL package for APEX webservice. Here is an example I use (modified and shortened, just to show how much better this is than to use it from the application).
CREATE OR REPLACE PACKAGE webservice_pkg
IS
 PROCEDURE create_webservice (
 p_id IN NUMBER,
 p_message OUT VARCHAR2,
 p_workspace IN VARCHAR2 DEFAULT 'MY_WORKSPACE',
 p_app_id IN NUMBER DEFAULT v ('APP_ID'),
 p_app_session IN VARCHAR2 DEFAULT v ('SESSION'),
 p_app_user IN VARCHAR2 DEFAULT v ('APP_USER')
END webservice_pkg;
CREATE OR REPLACE PACKAGE BODY webservice_pkg
IS
 PROCEDURE set_credentials (
 p_workspace IN VARCHAR2,
 p_app_id IN NUMBER,
 p_app_session IN VARCHAR2,
 p_app_user IN VARCHAR2
 IS
 v_workspace_id NUMBER;
 BEGIN
 SELECT workspace_id
 INTO v_workspace_id
 FROM apex_workspaces
 WHERE workspace = p_workspace;
 apex_util.set_security_group_id (v_workspace_id);
 apex_application.g_flow_id := p_app_id;
 apex_application.g_instance := p_app_session;
 apex_application.g_user := p_app_user;
 END set_credentials;
 PROCEDURE create_webservice (
 p_id IN NUMBER,
 p_message OUT VARCHAR2,
 p_workspace IN VARCHAR2 DEFAULT 'MY_WORKSPACE',
 p_app_id IN NUMBER DEFAULT v ('APP_ID'),
 p_app_session IN VARCHAR2 DEFAULT v ('SESSION'),
 p_app_user IN VARCHAR2 DEFAULT v ('APP_USER')
 IS
 v_envelope VARCHAR2 (32000);
 v_server VARCHAR2 (400);
 v_url VARCHAR2 (4000);
 v_result_url VARCHAR2 (1000);
 v_collection_name VARCHAR2 (40) := 'PDF_CARD';
 v_message VARCHAR2 (4000);
 v_xmltype001 XMLTYPE;
 BEGIN
 v_url := v_server || '.myserver.net/services/VisitCardCreator?wsdl';
 FOR c IN (SELECT *
 FROM DUAL)
 LOOP
 v_envelope :=
 '<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" '
 || 'xmlns:bran="http://www.myaddress.com">'
 || CHR (10)
 || '<soapenv:Header/><soapenv:Body>'
 || CHR (10)
 || '<parameter:'
 || 'some_value'
 || '>'
 || CHR (10)
 || '<bran:templateID>'
 || p_id
 || '</bran:templateID>'
 || '</soapenv:Body>'
 || CHR (10)
 || '</soapenv:Envelope>';
 END LOOP;
 set_credentials (p_workspace, p_app_id, p_app_session, p_app_user);
 BEGIN
 apex_web_service.make_request
 (p_url => v_url,
 p_collection_name => v_collection_name,
 p_envelope => v_envelope
 p_message := 'Some message.';
 EXCEPTION
 WHEN OTHERS
 THEN
 v_message :=
 v_message
 || ''
 || 'Error running Webservice Request. '
 || SQLERRM;
 END;
 BEGIN
 SELECT v_result_url
 || EXTRACTVALUE (VALUE (t),
 '/*/' || 'Return',
 'xmlns="http://www.myaddress.com"'
 xmltype001
 INTO v_result_url,
 v_xmltype001
 FROM wwv_flow_collections c,
 TABLE
 (XMLSEQUENCE (EXTRACT (c.xmltype001,
 '//' || 'Response',
 'xmlns="http://www.myaddress.com"'
 ) t
 WHERE c.collection_name = v_collection_name;
 EXCEPTION
 WHEN OTHERS
 THEN
 v_message := v_message || '' || 'Error reading Collection.';
 END;
 EXCEPTION
 WHEN OTHERS
 THEN
 p_message := v_message || '' || SQLERRM;
 END create_webservice;
END webservice_pkg;
/If you use it this way, you will find out what the problem is much faster.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Basic auth and MSIE

Hi,
I'm using basic auth and used to send username/password with
the URL to authenticate from another webserver (with some other
kind of authentication), but - as you know - Microsoft doesn't
support that any longer and so this works for some other
webclients but not for IE (or only with a patch, that isn't installed
everywhere).
Now I have seen that for Apache there is a module called
mod_auth_cookie to fake that kind of implicit authentification.
My Question: has anybody done this for SJWS or can't that
be done?
TIA
Reinfried

Hi,
Please check the below link
Re: Accessing Portal component without login screen
hope is solve your problem.
Raghu

Any way to set "enforce-valid-basic-auth-credentials" from the WL console?

Someone recently advised me to set "enforce-valid-basic-auth-credentials" to "false" in my laptop config.xml to avoid some annoying login prompts to the application I'm deploying locally. I haven't tried this yet because I wanted to know if there was a page in the WebLogic admin console that can set this flag.
If not, how exactly does this get set in the config.xml? Where does it go, and exactly what would the element look like?

Hi David,
 Admin Console does not provide any feature to enable or disable "EnforceValidBasicAuthCredentials" 
You can use WLST script If you don't have access to "config.xml" like following:
"ChangeEnforceValidBasicAuthCredentials.py"
connect('weblogic','weblogic','t3://localhost:7001')
edit()
startEdit()
cd('SecurityConfiguration')
cd('base_domain')
set('EnforceValidBasicAuthCredentials','false')
save()
activate()
print 'Now Restart Your Server...'Above is a Non-Dynamic Change...It means ...once you run the Script ..you need to restart the Server to reflact the changes...
In the Above Script
base_domain = is the Domain name
weblogic= Admin UserName
weblogic= Admin Password
t3://localhost:7001 = Is the Admin Server URL
How to run the above script:
Before running the above WLST please run the "setWLSEnv.sh"/ "setWLSEnv.cmd". Then
java weblogic.WLST /app/myScriptLocations/ChangeEnforceValidBasicAuthCredentials.py.
Thanks
Jay SenSharma
http://middlewaremagic.com/weblogic (Middleware Magic Is Here)

OAM - Basic Auth dialog continues to show despite config.xml changes

I have set enforce-valid-basic-auth-credentials to false in config.xml of the application domain I am running some apps from.
The applications are all configured for BASIC authentication.
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>myrealm</realm-name>
</login-config>
The problem is that after logging on from the OAM default FORM page the Basic Authentication dialog is still being presented.
I have referenced the following SR's to try find more info:
OIM/OAM SSO Weblogic Authentication Pop up After Login [ID 1081011.1]
OAM Configuration Steps Needed to Prevent a Second Authentication Prompt by Weblogic [ID 559442.1]

The issue has been resolved. There was no interesting work-a-round or fix involved.

SAP Fiori Basic Authentication Popup

Hi All
Please advise on how to disable the basic authentication pop-up screen - I am unable to reach the SAP Fiori login page instead I get a basic http popup screen.
Please advise
RGDS
Ted
Tags edited by: Michael Appleby

Hi Ted,
Go to SICF - > /default_host/sap/bc/ui5_ui5/ui2/
Error pages tab -> Configuration -> System logon configuration ->
Regards,
Tejas

Disable JWS BASIC Auth dialog ?

I have a Swing based client application that has a custom Login page. We have converted our client/server access from RMI to SOAP. The issue I have is when a user enters incorrect user/pass in my custom swing based login UI, JWS intercepts the response and throws up its own BASIC Auth dialog, instead of just failing so my users can reenter their credintials in the swing based login UI.
Now, if you go ahead and reenter proper credintials in the JWS BASIC Auth dialog, then everything continues on ok. What I need to do is NOT get the JWS BASIC Auth dialog.
This is easy to do with a HTML/JSP based login page, cause I could just use FORM based authentication. But that doesn't seem to work with a swing based client because there is no real login-form to redirect to.
Any Ideas would be appreciated.

It shouldn't be much harder than adding to your class this:
    private static class NOAuthenticator extends Authenticator {
     protected PasswordAuthentication getPasswordAuthentication() {
         return null;
    static {
     Authenticator.setDefault(new NOAuthenticator());
    }You may need a constructor, not sure, I have one in my version 'cause it'a bit more complex: it prevents server authentication (for exactly the same reason you exposed), but allows Proxy authentication.
Bye.

Forms based authentication + Basic authentication = no way to use the basic auth!!!!

Hi,
I setup a test sharepoint site, claims mode, with both the forms and basic authentication enabled.
I expect to see the page asking me which authentication method I want to use, but I never see this page!!!
I have to select the windows authentication (NTLM or Kerberos) to see this page!
why using only the Basic authentication did not prompt the user?
and how to be authenticated using the basic authentication rather than the forms auth when both are enable for the same site?
>I do NOT want to extend my site to have 2 zones... my question is ONLY with 1 zone configured.

What is the business purpose for using Basic Auth over NTLM/Kerberos?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I cannot upload photos from iPhoto 9 to Flikr. When I attempt to do so, I get the message "the login details or auth token passed were invalid." Please help.

I cannot upload photos from iPhoto 9 to Flikr. When I try, I get the message "the login details or auth token passed were invalid." I am using iPhoto 9 version 8.1.2, and my OS is 10.9.5. My computer is a MacBook Pro. I do not have this trouble with my iMac. This trouble started before I updated to OS10.9.5. I do not have this problem when uploading to FaceBook or sending by e-mail.
This problem started when I tried to upload some photos after hitting the "use other account" tab. This took me to a Flikr site asking me for permission to make my iPhoto information available to others. I clicked "yes," and then I changed my mind and clicked "no." I haven't been able to upload to Flikr since.
I searched Flikr and Yahoo for a solution, and Yahoo says the trouble is in iPhoto. I checked my Flikr account, and iPhoto extensions are enabled.
I need to upload some school and alumni photos, so I sure could use some help. I am Not computer proficient. Thank you.

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Login via Basic Auth popup

Similar Messages

Maybe you are looking for