Login window appears, but it takes 40-72 seconds to get the

hello,
We have the following problem with Windows XP SP3 Novell Client 4.9 SP5 IR1.
Novell login screen appears, but it still takes 40-72 seconds to send a DHCP-Request
from Windows XP to DHCP-Server (Novell OES2 SP3)
What can be the cause for this delay?
(The NIC IEEE 802.1X Authentification delayed by 20-30 Sec)
For your efforts in advance, thank you.
Rolf

Originally Posted by partnernetrst
hello,
We have the following problem with Windows XP SP3 Novell Client 4.9 SP5 IR1.
Novell login screen appears, but it still takes 40-72 seconds to send a DHCP-Request
from Windows XP to DHCP-Server (Novell OES2 SP3)
What can be the cause for this delay?
(The NIC IEEE 802.1X Authentification delayed by 20-30 Sec)
For your efforts in advance, thank you.
Rolf
My first guess would be the setting of the switch port connected to the pc. It should be set to client mode (spanning-tree portfast as it's called by some vendors) or else the pc port won't directly get initialized while booting, resulting in the initial dhcp packets sent by the pc not finding their way to the network.
Could that be the issue?
- Willem

Similar Messages

I use to be able to connect to my shares on my windows 2000 computer via smb. Now the login screen appears but it shakes when I try to login no matter what?

I hav just upgraded from Lion to Mavericks.
Connection to my windows 2000 with smb doesn't work after uppgrading to Mavericks.
The login window appears but shakes as it doesn't recognize my password even if it is correct.
Any solutions?

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

IMac won't start up: No login window appears.

Hello, there, everyone. The problem I'm addressing here is that my iMac is simply refusing to start up. Two days ago I turned it off (because of irrelevant problems), and since then it just won't boot up completely. Whenever I turn it on, it loads past the blue and white loading screens and the grey Apple logo, but once it loads the default Apple wallpaper it won't go any farther. No login window appears, preventing use. I've tried various alternative ways of booting it up, but nothing seems to work. I've tried safe-booting it (Which really doesn't change anything), initiating the Apple Hardware Test (Which freezes once I choose a language), unpluggung the computer both when it is on and off and retrying the start-up sequence, but still no progress has been made.
My iMac is about four years old, which isn't exactly a short life for a computer, but it still surprises me to encounter such a major problem. If anyone would happen to have any experience with this situation, I would be very greatful for any help at all. Thank you in advance.

Three beeps usually indicates failed or no ram. Try removing and reseating all of the ram. If that doesn't help and you have access to another mac can you start the imac in Target Disk Mode? OS X Mountain Lion: Transfer files between two computers using target disk mode
You'll probably need to take it in for service, but hopefully you aren't about to learn the hard way about backing up.

If i click on tools...addons.then the window appears but japanese language is next to the addons and browse addons is also appearing as mozilla,com/ja

even on here i am getting part japanese! firefox is latest version english GB british etc...here is the address of this page
https://support.mozilla.com/ja/questions/new?product=desktop&category=d6&search=ifi+click+on+tools...addons.then+the+window+appears+but+japanese+language+and+browse+addons+is++also+appearing+as+mozilla%2Ccom%2Fja&showform=1#question-form

even on here i am getting part japanese! firefox is latest version english GB british etc...here is the address of this page
https://support.mozilla.com/ja/questions/new?product=desktop&category=d6&search=ifi+click+on+tools...addons.then+the+window+appears+but+japanese+language+and+browse+addons+is++also+appearing+as+mozilla%2Ccom%2Fja&showform=1#question-form

When I need to fill in a form the autofill dialog window appears but there is no response when I click in the window.

When I need to fill in a formon Safari, the autofill dialog window appears but there is no response when I click in the window. It will work if I go to the edit submenu and click on autofill but not by clicking autofill in the window on the form itself. Why not?

The reason firefox is not able to launch thunderbirds is because it cannot start thunderbird as administrator unless firefox is running as administrator, try to start firefox as administrator user then click the link.
It should work.
To start a program as '''administrator on windows''', '''RIght Click''' on the iFF con and choose '''Run as Administrator''', then press yes when the user access control box pops.
Then Let us know what happened

With installation of 10.1 I lost finder search function. The finder window appears, but no matter what I put in the search window, nothing is found. I re-installed it with initial success, but it failed again very soon.

With installation of 10.1 I lost finder search function. The finder window appears, but no matter what I put in the search window, nothing is found. I re-installed it with initial success, but it failed again very soon.
MacBook Pro (15-inch, Mid 2010)
OS X 10.10.1

Hey Reoh,
Thank you for contributing to the Apple Support Communities.
If searching for files in Finder doesn't return any results, try using the steps in this article to reindex the Spotlight search index of your MacBook Pro hard drive:
Spotlight: How to re-index folders or volumes - Apple Support
Sincerely,
Jeremy

Remote Client take 60 - 90 Seconds to get logon window

I posted this earlier on the Tiger Server section but got no replies. Hopefully someone here has an idea?
We have a 10.4.11 server running AFP and multiple other services. About 25 users connect to the AFP sharepoints via the internal network and the login window appears immediately. Another 25 users connect through a hardware VPN from another office and their login screen appears immediately as well. We have another set of 25 users who connect directly over the internet, and only recently, it is taking 60 - 90 seconds for the logon window to appear. Once it does appear, the connection runs at normal speed.
It makes no difference whether the address is specified as FQDN or IP address. I've tried turning off Bonjour, and adding the host domain name to the search domains, but this made no difference either.
This problem did not exist until recently. It may have been about the same time as the 10.5.4 update, but I can't be sure.
Also, our ISP is known to play with "Shaping" although we did have AFP set to high priority and Port 548 is not restricted.
Is there another service that Apple uses to bring up the logon window? If so perhaps our provider is restricting bandwidth on that.
Tim

Okay, Here's the DIG output from one of the remotes:
; <<>> DiG 9.4.2-P1 <<>> cclgw.georgian.net
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 47412
;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;cclgw.georgian.net. IN A
;; ANSWER SECTION:
cclgw.georgian.net. 3600 IN CNAME www.e3.ca.
www.e3.ca. 3600 IN A 142.46.42.2
;; Query time: 770 msec
;; SERVER: 208.67.222.222#53(208.67.222.222)
;; WHEN: Fri Aug 22 08:36:03 2008
;; MSG SIZE rcvd: 75
The telnet connection to the AFP port from the same machine was immediate.
I don't think that this is a DNS issue (Yes we have tried connecting to www.e3.ca with the same results)
- Tim

HT5373 How do I enable a calendar subscription in my iCloud calendar? I'm using a Windows laptop (Home Office 7) and am trying to get the rugby and footfall fixtures to appear on my iCloud calendar. Thanks for your help.

How do I enable a calendar subscription in my iCloud calendar? I'm using a Windows laptop (Home Office 7) and am trying to get the rugby and footfall fixtures to appear on my iCloud calendar. Thanks for your help.

I suspect you had the same issue I did and downloaded the 64-bit version of the OpenSC libraries, but your firefox is 32-bit. You can see the opensc-pkcs11.dll in the System32 folder via windows explorer, but when you browse that directory via firefox to add the module, you are acutally being redirected to the SysWOW64 directory. Try intstalling the 32-bit OpenSC libraries, and adding the appropriate library from the C:\Windows\SysWOW64 directory.

My iPod Classic was stolen and returned to me by police but now it "cannot be synced because it cannot be written to or read from". I noticed the thief had changed the format to "windows" but I have restored it and still get the same message.

My iPod Classic was stolen and returned to me by police but now it "cannot be synced because it cannot be written to or read from". I noticed the thief had changed the format to "windows" but I have restored it and still get the same message.

If the media is in the library then yes it is that simple. Connect the device, load it up with your media. The problem is when you try to connect a full device to a new empty library on a new computer when iTunes will offer to replace the content on the device with that in the local library, i.e. nothing! (For anyone in that position see Recover your iTunes library from your iPod or iOS device).
You should be able to add your devices at https://supportprofile.apple.com/ though I'm not sure what happens if the second hand iPod was previously registered.
tt2

I just bought a ScanSnap scanner and it came with Adobe Acrobat Standard for Windows - but I have a Mac - can I get the Mac version?

I just bought a ScanSnap scanner and it came with Adobe Acrobat Standard for Windows - but I have a Mac - can I get the Mac version?

Hi Dcee3,
Acrobat Standard has not been developed for Mac platform so Mac version is not available. It can only run on windows machine.
Regards,
Anand

Upgraded from 3.6 to 7 - changed nothing else - now takes 50-60 seconds to for the browser to start - works OK after that as long as I keep a window open. I then diabled all plug ins and extenstions - still 60 seconds to load browser.

I upgraded from 3.6 to 7 - changed nothing else - now takes 50-60 seconds to for the browser to start - works OK after that as long as I keep a window open. I then disabled all plug ins and extensions - still 60 seconds to load browser. I also keep getting a high memory warning from AVG with mem usage up to 600,000 k

I upgraded from 3.6 to 7 - changed nothing else - now takes 50-60 seconds to for the browser to start - works OK after that as long as I keep a window open. I then disabled all plug ins and extensions - still 60 seconds to load browser. I also keep getting a high memory warning from AVG with mem usage up to 600,000 k

My iPod Touch 4th generation white is cracked (8 GB). It cracked in Jan 2012 but I jailbroke it in June 2012, than unjailbroke it two days after I jailbroke it. Can I still take it to Apple to get the screen fixed at whatever cost (Its a 8GB)

It cracked in Jan 2012 but I jailbroke it in June 2012, than unjailbroke it two days after I jailbroke it. Can I still take it to Apple to get the screen fixed at whatever cost. And can they find out? I wanna make it where they cant!

Only Apple knows. Make an appointment at the Genius Bar of an Apple store. The worst is that they say no.

Unable to install 5.0.1. Get message saying must restart to complete previous upgrade, but it never completes and I continuouisly get the "Restart" message.

Yesterday I upgraded to Firefox 5.0.1. My system is Win7 64-bit. The program asked me to restart to complete upgrade; however, even after restart I continue to get the same message. I attempted to "uninstall" via Windows Control Panel and even within the Mozilla Firefox program file. Again, the only message I get is to "restart to allow upgrade to complete.

Thanks for your reply. I found that article while troubleshooting; however, those files do not exist. In other words, when I search for %APPDATA%, it takes me to a "roaming" folder, but there is no file named qpidata...
So, I am in a circular issue where I am prompted to restart windows to "finish upgrade" but even after restart, I continue to get the same "restart windows to finish..." message.
Anything else I should try?

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash.

Calendar entry takes along time. I get the spinning color wheel after each tab.

Calendar entry takes along time. I get the spinning color wheel after each tab. How do I avoid this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Login window appears, but it takes 40-72 seconds to get the

Similar Messages

Maybe you are looking for