Login window freezes if I don't restart the computer every time...

My computer freezes (spinning wheel of death) if instead of shutting down after you, I just log off the user. If I log off and then try to log back in the next time, my computer just sits there... If I shutdown and restart the next day, it's no problem. Any ideas?

Hi kelly003... Boot from your Tiger installer disk, select your language and then from the menu>Utilities select Disk Utility. select your hard drive from the left side and then Repair Disk. see if that straightens out your issue.

Similar Messages

  • When I updated my Mac, it won't connect to the internet when I've closed all Safari windows. I have to restart the computer every time to make it work.

    Every time I update my Mac different problems occur. This time when I got an update notification, I went ahead and updated what it wanted. Now when I'm done browsing the internet and close the windows and try to open a new one, it says the internet isn't working. I checked the network diagnostics and it says everything is working fine. I've noticed I have to restart my computer every time to get it the internet to work now. This never happened before I did the update.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Boot in safe mode. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
    In safe mode, launch Safari and test. Same problem(s)?
    After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

  • Photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1

    photoshop elements 12 editor doesn't open, organizer is fine. I uninstalled the program and re-installed it (restarted the computer each time)...didn't solve the problem. using pc, windows 8.1
    can someone help me with this issue?

    Two suggestions:  the first one is a workaround. You just have to drill down your program file tree to Adobe Photoshop Elements Organizer and find the .exe file - the one specifically for Organizer, not Elements.  Make a shortcut to that file on your desktop and it will open Organizer. The second suggestion resolved the problem altogether for me. I actually called Dell and after working with several different techs over several different days, I talked to a tech in premium support who was excellent. I discovered from them that it is actually a problem with the windows system files. I have 8.1.  I went through a "refresh" on my computer which rebuilt all the files. Then reinstalled Adobe as well as my other programs again and Photoshop Elements Organizer works from the standard desktop shortcut.

  • TS3999 I have a new imac and cannot get my ical to show up on the new imac via icloud.  Every time i go to system preferences and activate the calender it freezes.  I have restarted the computer mutiple times.

    I have a new imac and cannot get the ical to show all of my calenders.  I have gone to system prefrences and clicked the calendar setting and it freezes and i have to force quit.  I have restarted the computer multiple times.  Any suggestions?

    Hello JETaylor2015,
    Congratulations on your new iPod nano!  I would be concerned too if my iPod was not recognized by iTunes or my computer.  I recommend reviewing this article for steps to take when your iPod is not recognized:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I can't get Firefox to bring up the browser. It continually tells me that the program is already running and to either close it or restart my computer. Not having anything to actually close, I restarted the computer five times. Now what?

    I can't get Firefox to bring up the browser. It continually tells me that the program is already running and to either close it or restart my computer. Not having anything to actually close, I restarted the computer five times. Now what?
    == This happened ==
    Just once or twice
    == Today. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; PeoplePal 6.6; PeoplePal 7.3) w:PACBHO60 w:PACBHO60 w:PACBHO60 w:PACBHO60 w:PACBHO60

    Phillipp,
    I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
    Littleberry

  • Why do I have to restart the iPad every time I try to access the internet?

    Why do I have to restart the iPad every time I try to access the internet?

    (A) Try reset iPad
    Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
    Note: Data will not be affected.
    (B) Close all apps in the multi-task window
    1.Double-click the Home button.
    2. Swipe the app's preview up to close it.
    3. Preview will fly off the screen.

  • HT3887 my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

    my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

    I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure  if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck

  • Iphone 4s(ios 7) hangs after i reject calls by pressing the on/off button while it is in the lock screen.I restart the phone every time when i reject calls..what can i do ?

    iphone 4s(ios 7) hangs after i reject calls by pressing the on/off button while it is in the lock screen.I restart the phone every time when i reject calls..what can i do ?

    I've same problem in iPhone 5c. I was using iPhone 4, problem appears after updating to ios7. I changed my phone to iPhone 5c, looks like it's a bug in ios7. But I think you might not turn on or off your internet connection frequently to reduce this problem. My friend has a same iPhone she never gets such problem like this cause she uses iPhone 5c with Tata Docomo (India) 2g with no internet connection. May be this would be the best solve that you should not turn on or of your internet connection so frequently...
    Do any one have any better idea?

  • Trying to upgrade a MacBook Pro to snow leopard 10.6.3 and all I get after the upgrade is done is the a blank page with the apple trade mark. I did restart the computer few times and all the same

    Trying to upgrade a MacBook Pro to snow leopard 10.6.3 and all I after the upgrade is done I just get a blank page withe apple symbol. I've rebooted the computer and nothing happens

    Upgrading from which Mac OS X?
    Is this v10.6.3 a retail disc?
    You can purchase Snow Leopard from the Apple online store > Mac OS X 10.6 Snow Leopard - Apple Store

  • When I try to open Firefox, Mozilla Crash Reporter comes up and says "Firefox had a problem and crashed." "We'll try to restore your tabs and windows when it restarts." I've tried restarting the computer several times. It was working fine yesterday.

    Before it started with the crash report it was telling me that Firefox couldn't find the server at www.yahoo.com. That's my homepage. I'm writing this on my friends computer and will also be checking my e-mail on it. I don't have any way to get a Crash ID. Thank you very much in advance- Jason

    Try Cor-el instruction by creating new profile
    * https://support.mozilla.com/en-US/questions/874649#answer-245454

  • My external monitor and MacBook Pro screen turn different colours and freeze while in use - only restarting the computer will refresh the display. Is there a way this can be fixed? It is happening more and more frequently.

    The monitor is Philips brand and works perfectly fine usually. Every now and again it will happen mid-use and I have to constantly re-start my laptop.

    The F7 key should also toggle between extended desktop and mirroring. If you open the lid on the PB, you should see that the F7 key is imprinted with two overlapping rectangles. That's supposed to represent the mirroring function and pressing the key should toggle the function (unless you had previously turned off the function keys).

  • I can't open firefox - I've tried restarting the computer several times - I'm using Microsoft Essentials and this has happened since the last virus scan.

    The last virus scan brought up no problems. I can't find anything in Essentials that suggests Firefox is being blocked but I've tried opening it by clicking and right clicking but no luck. I found a suggestion on Firefox support that said I should create a new profile but I can't find the relevant exe -p program despite doing a full Search. This problem is on my desktop which is using XP (I'm sending this from my laptop where there is no problem - and I'm also using Essentials on this.) Hope someone can help as all my links are now gone.

    Open your firewall program. First check the settings. Make sure that the
    program is set to tell you if a new program wants access to the web. Then
    go to the list of programs the firewall has. Make sure that all the programs
    you want to access the web are set to '''ALLOW'''. If it is set to '''AUTO''', the
    firewall may not allow access.
    =================================================
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • HT4061 my iphone will not sync with itunes but opens in a different window and my hone now ask to trust the computer every time.

    Every time i try to sync my phone it does not regerster with itunes any more but opens in a different page.

    i too am having the same problem

  • Computer slows down more each time I print a PDF. It reverts to a reasonable speed if I restart the computer. Everything worked normally until I installed Avast Virus Protection.

    I have Windows XP and Adobe Reader XI. My printer is a Ricoh Aficio 240W.
    My computer normally lacks internet access. I briefly connected it to the internet to install the full version of Avast Antivirus, then disconnected it from the internet again, and it has been disconnected from the internet since.
    After I installed Avast the computer began acting screwy when I printed PDF files. I uninstalled Avast but the screwiness continues.
    The image in the upper left corner was taken after doing one printing of a PDF file. I'm pretty confident AcroRd32.exe. is Adobe Reader. Notice that after running one print Adobe Reader is using about 50 CPU's.
    The image to the right of that was taken after doing two printings of a PDF file. Notice that after running two prints there are two AcroRd32.exe processes using 50 CPU's.
    The image below the other two was taken after doing three or four printings of a PDF file. Notice that after three printings one AcroRd32.exe process is using 50 CPU's and two others are using about 25. After about three printings my computer slows down dramatically, and it keeps getting slower the more prints I do.
    When I restart the computer it reverts back to normal. Can anyone think of a better solution to this problem of increasing slowness than restarting the computer every two PDF prints?
    My computer currently has no virus protection, although Windows Firewall is up. Someone at Avast I briefly mentioned this too thinks this should not happen and he was wondering if the computer has some sort of virus...but before I removed Avast it told nothing about viruses that I know of. I honestly do not know if anyone scanned the computer with Avast before removing Avast, but I suspect it was scanned before the removal of Avast. I suppose this could be the result of some virus...but then the computer behaves quite normally, except when I print PDFs. I'm wondering if Avast changed some settings in my printer program or Adobe programs....
    I have CCleaner. Every time I analyze my computer to look for stuff to remove to speed up the computer it shows Internet Explorer history files, and sometimes Internet Explorer temporary internet files despite not being online. If I click on Internet Explorer to go onto the internet, I am told I am working offline.
    Thanks. Guesses are welcomed.

    Note that regarding this section:
    The image in the upper left corner was taken after doing one printing of a PDF file. I'm pretty confident AcroRd32.exe. is Adobe Reader. Notice that after running one print Adobe Reader is using about 50 CPU's.
    The image to the right of that was taken after doing two printings of a PDF file. Notice that after running two prints there are two AcroRd32.exe processes using 50 CPU's.
    The image below the other two was taken after doing three or four printings of a PDF file. Notice that after three printings one AcroRd32.exe process is using 50 CPU's and two others are using about 25. After about three printings my computer slows down dramatically, and it keeps getting slower the more prints I do.
    The layout changed when I posted. Therefore, what I mean by the image in the upper left corner is the image at the top. What I mean by the image to the right of that is the image in the middle of the other two. What I mean by the image below the other two is, of course, the image at the bottom.

  • My iMac will not recognize the factory speakers or any external hard ware until I restart the computer.

    Hey all,
    I have a relatively new iMac (Purchased Dec 2011) that runs on OS 10.7.3.  Currently we are having problems with the computer recognizing any plug-ins when we first turn the computer on (including all USB or Firewire hard ware and builtin speakers).  The computer just does not acknowledge that they are there until I restart the computer, at which point everything works great.
    I was wondering if anyone had suggestions on how to fix this issue... it's not major, but it is a pain to have to restart the computer each time you need to use an external hard drive or listen to music.
    Thanks in advanced, and just to let you know I just updated my software yesterday.

    As a test launch iPhoto with the Option key held down and create a new, test library.  Connect the devices and see if the same problem persists. Does it?
    OT

Maybe you are looking for

  • Nokia presenets its new flagship phone the 'N97'

    Quite shocking and surprising that none here has bothered to update others about nokia's new i-phone.... oh i mean i-phone competition........ Drum Roll............ Ladies and Gents brace yourself as Nokia presents its new flagship phone the 'N97' Th

  • Apple Remote Desktop 2.2 not able to do a storage report

    For some reason after updating to 10.4.7 i am unble to request a storage report to 1 or more computers. It comes back to me and says "Report database access not allowed" so im not sure where to begin. I can do a network test and i can chekc administr

  • Mark for deletion - Process Order

    Hello friends, I am getting the following error when I am trying to activate the deletion flag in process order. Kindly guide. System status ORRQ is active (ORD 50000369) Message no. BS013 Diagnosis Object ORD 50000369 has system status ORRQ (Order r

  • Java.sql.SQLException: XA error: XAER_NOTA

    I am using Weblogic 6.1 SP3 and Oracle 9.0.1 and Oracle 901 database. And I am getting the following Exception. I also get the same error when I use the oracle 8.1.7 driver. Anyone who can help..... Thank you.

  • The Whine of Intel Core Duo (mobile) (& its users) in Laptops of all brands

    Can I start by saying - OH NO, NOT ANOTHER WHINE THREAD. But I had a search and this issue doesn't seem to be covered that much yet, and I feel it's important for us blighted by the whine to work out what to do about it. Apple has told me (and a lot