Login Windows 2008 R2 domain computer using temp profile

Situation: 1. The user could not login the domain computer running Windows 7 with this error:
user profile service failed the logon domain.
2. When we check the user profile, the type and status shows backup.
3. Deleted the profile and re-login, it doesn’t create a new profile and uses temp profile instead.
4. Current other domain users, for example administrator work fine.
5. If using any new domain user to login, it doesn’t create a new profile and it uses temp profile always.
6. The Event Viewer has these two logs:
Log Name:     
Application
Source:       
Microsoft-Windows-User Profiles Service
Event ID:     
1530
Task Category: None
Level:        
Warning
Keywords:     
User:         
SYSTEM
Computer:     
Win7-PC1
Description:
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards. 
 DETAIL -
 1 user registry handles leaked from \Registry\User\S-1-5-21-1764965194-3020482753-2823025945-1114:
Process 4660 (\Device\HarddiskVolume3\Program Files (x86)\LogMeIn\x64\LogMeIn.exe) has opened key \REGISTRY\USER\S-1-5-21-1764965194-3020482753-2823025945-1114
 Log Name:     
Application
Source:       
Microsoft-Windows-User Profiles Service
Event ID:     
1505
Task Category: None
Level:        
Error
Keywords:     
User:         
A
Computer:     
Win7-PC1
Description:
Windows cannot load the user's profile but has logged you on with the default profile for the system.
 DETAIL - Access is denied.
Any ideas?
Bob Lin, MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

Hi,
There may be two similar GUIDS found for the problematic user, one for the temp profile and one for the regular profile but with the ".bak" extension.
I suggest you removed .bak from sid to check the result.
If you have any feedback on our support, please click
here
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • How to Reset Windows 2008/R2 Domain Administrator Password

    How to Reset Windows Server 2008/R2 Domain Administrator password if forgot or lost it?
    It is annoying and bad to forget a Windows Server 2008/r2 Domain administrator login password. It is troublesome unless you have that Windows Server 2008/r2 password reset disk. We can still find several tricks to reset Windows Server Domain password but they require a mass of operations and waste a lot of time. For example, you can reset Windows Server 2008/R2 domain administrator password with an installation disk but it requires you to type a mass of command line. So today I want to share everyone an omnipotent method to reset Windows Server 2008/R2 Domain/local administrator password. You need the following 3 things.
    An accessible PC.
    A USB/CD/DVD flash drive.
    The Windows password reset tool Daossoft Windows Password Rescuer.
    Then it requires 4 steps as below:
    Step 1: Download and install Daossoft Windows Password Rescuer into that accessible computer.
    Step 2: Burn it to the flash drive.
    Step 3: Boot your Windows Server computer from the flash drive.
    Step 4: Follow its instruction and click “Reset Password” button to reset your Windows 2008/R2 Domain/Local administrator password.
    More details in this video: Windows Server 2008 R2 Password Reset - Reset Domain or Local Password.

    It wasn't difficult to reset the domain password and I think Microsoft's policy of not providing an easy forward way is to create an
    illusion of security which is not there. Linux systems that are much more secure that MSFT software allow easy password reset when physical access is there so why not include the same tools in System Repair tools or using F8?
    Anyhow, this guide helped me reset the password in 5 minutes. Read the bottom of it to find the scripted / automatic version of the process:
    http://www.petri.co.il/reset_domain_admin_password_in_windows_server_2003_ad.htm
    Thanks,

  • Windows 2008 R2 Domain Controller (PDC) - NTP server - time showing local CMOS clock

    I'm having issues setting an external source on a Windows 2008 R2 domain controller (PDC emulator role for the domain)
    Here is the output showing its source is the Local CMOS clock.
    C:\Windows\System32>w32tm /query /status
    Leap Indicator: 0(no warning)
    Stratum: 1 (primary reference - syncd by radio clock)
    Precision: -6 (15.625ms per tick)
    Root Delay: 0.0000000s
    Root Dispersion: 10.0000000s
    ReferenceId: 0x4C4F434C (source name:  "LOCL")
    Last Successful Sync Time: 06/11/2014 15:44:15
    Source: Local CMOS Clock
    Poll Interval: 6 (64s)
    1) I have performed the following on the DC with the PDC role:
    net stop w32time
    w32tm /config /syncfromflags:manual /manualpeerlist:"0.pool.ntp.org, 1.pool.ntp.org, 2.pool.ntp.org"
    w32tm /config /reliable:yes
    net start w32time
    w32tm /query /configuration 
    [Configuration]
    EventLogFlags: 2 (Local)
    AnnounceFlags: 5 (Local)
    TimeJumpAuditOffset: 28800 (Local)
    MinPollInterval: 6 (Local)
    MaxPollInterval: 10 (Local)
    MaxNegPhaseCorrection: 172800 (Local)
    MaxPosPhaseCorrection: 172800 (Local)
    MaxAllowedPhaseOffset: 300 (Local)
    FrequencyCorrectRate: 4 (Local)
    PollAdjustFactor: 5 (Local)
    LargePhaseOffset: 50000000 (Local)
    SpikeWatchPeriod: 900 (Local)
    LocalClockDispersion: 10 (Local)
    HoldPeriod: 5 (Local)
    PhaseCorrectRate: 7 (Local)
    UpdateInterval: 100 (Local)
    [TimeProviders]
    NtpClient (Local)
    DllName: C:\Windows\System32\w32time.DLL (Local)
    Enabled: 1 (Local)
    InputProvider: 1 (Local)
    AllowNonstandardModeCombinations: 1 (Local)
    ResolvePeerBackoffMinutes: 15 (Local)
    ResolvePeerBackoffMaxTimes: 7 (Local)
    CompatibilityFlags: 2147483648 (Local)
    EventLogFlags: 1 (Local)
    LargeSampleSkew: 3 (Local)
    SpecialPollInterval: 3600 (Local)
    Type: NTP (Local)
    NtpServer: 0.pool.ntp.org, 1.pool.ntp.org, 2.pool.ntp.org (Local)
    NtpServer (Local)
    DllName: C:\Windows\System32\w32time.DLL (Local)
    Enabled: 1 (Local)
    InputProvider: 0 (Local)
    AllowNonstandardModeCombinations: 1 (Local)
    VMICTimeProvider (Local)
    DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
    Enabled: 1 (Local)
    InputProvider: 1 (Local)
    But still showing the output:
    C:\Windows\System32>w32tm /query /status
    Leap Indicator: 0(no warning)
    Stratum: 1 (primary reference - syncd by radio clock)
    Precision: -6 (15.625ms per tick)
    Root Delay: 0.0000000s
    Root Dispersion: 10.0000000s
    ReferenceId: 0x4C4F434C (source name:  "LOCL")
    Last Successful Sync Time: 06/11/2014 15:58:45
    Source: Local CMOS Clock
    Poll Interval: 6 (64s)
    2. If I resync and rediscover the following error appears: 
    w32tm /resync /rediscover 
    Sending resync command to local computer
    The computer did not resync because no time data was available.
    3. I've also clearing the current time config, by
    net stop w32time
    w32tm /unregister
    w32tm /register
    net start w32time
    But no change, it still shows the Local CMOS clock. 
    4. This event is showing 
    Log Name:      System
    Source:        Microsoft-Windows-Time-Service
    Date:          06/11/2014 15:43:30
    Event ID:      12
    Task Category: None
    Level:         Warning
    Keywords:      
    User:          LOCAL SERVICE
    Computer:      domaincontroller1
    Description:
    Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but it is the AD PDC emulator for the domain at the root of the forest, so there is no machine above it in the domain hierarchy to use as a time source.
    It is recommended that you either configure a reliable time service in the root domain, or manually configure the AD PDC to synchronize with an external time source. Otherwise, this machine will function as the authoritative time source in the domain hierarchy.
    If an external time source is not configured or used for this computer, you may choose to disable the NtpClient.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Time-Service" Guid="{06EDCFEB-0FD0-4E53-ACCA-A6F8BBF81BCB}" />
        <EventID>12</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2014-11-06T15:43:30.465619200Z" />
        <EventRecordID>77295</EventRecordID>
        <Correlation />
        <Execution ProcessID="256" ThreadID="2056" />
        <Channel>System</Channel>
        <Computer>domaincontroller1</Computer>
        <Security UserID="SID" />
      </System>
      <EventData Name="TMP_EVENT_DOMAIN_HIERARCHY_ROOT">
      </EventData>
    </Event>
    5. If I perform the below it appears DC2 is having problems but I'm not sure if related. 
    C:\w32tm /monitor
    DC1.domain.local *** PDC ***[192.168.1.1:123]:
        ICMP: 0ms delay
        NTP: +0.0000000s offset from DC1.domain.local
            RefID: 'LOCL' [0x4C434F4C]
            Stratum: 1
    DC2.domain.local[192.168.1.2:123]:
        ICMP: 0ms delay
        NTP: -110.4925481s offset from DC1.domain.local
            RefID: (unspecified / unsynchronized) [0x00000000]
            Stratum: 0
    DC3.domain.local[192.168.2.1:123]:
        ICMP: 0ms delay
        NTP: -0.0256084s offset from DC1.domain.local
            RefID: DC1.domain.local [192.168.1.1]
            Stratum: 2
    DC4.domain.local[192.168.2.4:123]:
        ICMP: 0ms delay
        NTP: -0.0011524s offset from DC1.domain.local
            RefID: 80.84.77.86.rev.sfr.net [86.77.84.80]
            Stratum: 2
    Warning:
    Reverse name resolution is best effort. It may not be
    correct since RefID field in time packets differs across
    NTP implementations and may not be using IP addresses.
    Any help would be much appreciated. Thanks. 
    Craig Brand

    I suspected some issue with AV so uninstalled. 
    To resolve the Access Denied I followed these steps: 
    stop w32time
    w32tm /unregister
    reboot
    regsvr32 /u w32time.dll
    w32tm /register
    sc query w32time -- you should see that the service is set to
    shared mode -- this is presumably how it should be -- if you try to start right now, you'll get the expected 1290 SID-related error
    reboot
    w32time should now automatically start at boot up and be running -- that was my result -- it's running as shared, started on its own, and I can do the w32tm /query commands successfully
    After rebooting the time service started. 
    I then repeated the steps: 
    net stop w32time
    w32tm /config /syncfromflags:manual /manualpeerlist:"0.pool.ntp.org, 1.pool.ntp.org, 2.pool.ntp.org"
    w32tm /config /reliable:yes
    net start w32time
    w32tm /query /configuration 
    And all worked. I'll wait a short while to see if this fixes the issue. I also have am SA case with MS so will confirm fix when resolved. 
    Craig Brand

  • How to reset Windows 2008 R2 Domain Controller "Administrator" password?

    Hello Everyone,
    I have lost Administrator password for the following system:
    Windows 2008 R2
    Domain Controller setup on same machine
    Stand alone server - no workstations or other servers invovled
    I still have the "Directory Service Restore Password" but I don't think that helps me for lost Administrator password. I beleive I need to boot from an .iso file to gain access. I already tried "Offline NT Password & Registery Editor" and it has set
    Administrator password to (blank) but that is not allowing me access as it seems that I have to login to domain controller Administrator. So, how can I reset that password?
    Thanks

    It wasn't difficult to reset the domain password and I think Microsoft's policy of not providing an easy forward way is to create an
    illusion of security which is not there. Linux systems that are much more secure that MSFT software allow easy password reset when physical access is there so why not include the same tools in System Repair tools or using F8?
    Anyhow, this guide helped me reset the password in 5 minutes. Read the bottom of it to find the scripted / automatic version of the process:
    http://www.petri.co.il/reset_domain_admin_password_in_windows_server_2003_ad.htm
    Thanks,

  • Installing Printers from Windows 2008 R2 printer server using the Cname

    Am having issues installing printers on workstations from the windows 2008 R2 print server using the DNS names. the servername and Full qualified Name works fine.
    l have tweaked the Registry and Disabled the StrictNameChecking but still getting an error.  this is the message am getting...
    Printer Installation Failed
    You do not have enough privilege to complete the printer installation on the local machine.
    I found this KB and did exactly what is in the KB but stilll....
    lhttp://support.microsoft.com/kb/870911/en-us
     need help

    Hi.
    I think I solved this yesterday. We got 1 printserver, with an alias, which we had this problem to connect to. I noticed that there is a difference between x86 and 64bits system entries in the registry...
    When you are having a 64bit system, you must use REG_QWORD instead of REG_DWORD, REG_DWORD is only to be used in x86 system! See below.
    Windows 2008 server R2 64-bit 
    HKLM\SYSTEM\CurrentControlSet\Control\Print
    = ”DnsOnWire” = REG_QWORD Decimal = 1
    (reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_QWORD /d 1)
    HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters
    = DisableStrictNameChecking = REG_QWORD Decimal = 1
    (reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_QWORD /d 1)
    HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\ 
    REG_SZ = OptionalNames = “aliasname” (C-name record in DNS)
    (reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
    Windows 2008 server x86 
    HKLM\SYSTEM\CurrentControlSet\Control\Print = "DnsOnWire" = REG_DWORD Decimal = 1
    (reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_DWORD /d 1)
    HKLM\SYSTEM\CurrentControlSet\services\Lanmanserver\Parameters = DisableStrictNameChecking = REG_DWORD Decimal = 1
    (reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_DWORD /d 1)
    HKLM\SYSTEM\CurrentControlSet\services\LanManServer\Parameters\  REG_SZ = OptionalNames = “aliasname”
    (C-name record in DNS)
    (reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
    Don't forget to reboot your system after these changes!
    Best Regards, Mats

  • Windows 2008 R2 domain controllers with Windows 2003 forest functional level Supported after Windows 2003 support ends in July 2015

    Hi
    Anyone knows whether Windows 2008 R2 domain controllers with Windows 2003 forest functional level will still be Supported after Windows 2003 support ends in July 2015 ?
    Thanks

    When Windows Server 2003 support ends, you should not have a Windows Server 2003 Domain Controller running if you would like to be supported by Microsoft. This means that there will be no reason to have a DFL or FFL that is lower than Windows Server 2008.
    So, if you are keeping Windows Server 2003 FFL to keep DCs running Windows Server 2003 then this is not supported.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • I have just transferred elements 11 to a new windows 7 64 bit computer using the original purchased disc. Organiser is working fine, but I cant get the Editor to open at all.

    I have just transferred elements 11 to a new windows 7 64 bit computer using the original purchased disc. Organiser is working fine and all my photos are there, but I cant get the Editor to open. It just says editor workspace is loading and then it eventually gives up.

    Try opening directly from your desktop, by passing the welcome screen.
    Go to Windows Explorer>C drive>Program Files (x86)>Adobe>Photoshop elements 11. Right click, then Send to>Desktop
    Double click on the shortcut and see it will open.

  • Windows 2008 R2 Client computer backup files (*.dat) can't get restored after re-imaging the Windows 2008 R2 server

    I have a Windows server 2008 R2 and I'm using backup feature to backup all computers in the network on it. Recently I ran into an issue and had to re-image my Windows 2008 R2 server  and had to restore 2 of my client computers but now I can't restore
    files from my client computer backups because they are not listed under Backups & Devices anymore however all backup files are still available on my Backup drive. How can I retrieve files from these backup files?

    Anyone out there to help me with this issue?

  • Windows 7, XP domain computer doesn't need password for VPN.

    Hello,
    I have a small problem, i dont understand why my domain computers can connect to VPN without providing the user name and password. I mean the both user name and password fields are left blank and connection is successful.. 
    I need to force users to enter the password and username. 

    Hello,
    I have a small problem, i dont understand why my domain computer can connect to VPN without providing the user name and password. I mean the both user name and password fields are left blank and connection is successful.. 
    I need to force users to enter the password and username. 
    Local Computer Policy ➞ Computer Configuration ➞ Administrative Templates ➞ Windows Components ➞ Remote
    Desktop Services ➞ Remote Desktop Connection Client
    Corsair Carbide 300R with window
    Corsair TX850V2 70A@12V
    Asus M5A99FX PRO R2.0 CFX/SLI
    AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
    G.SKILL RipjawsX DDR3-2133 8 GB
    EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
    Asus PA238QR IPS LED HDMI DP 1080p
    ST2000DM001 & Windows 8.1 Enterprise x64
    Microsoft Wireless Desktop 2000
    Wacom Bamboo CHT470M
    Place your rig specifics into your signature like I have, makes it 100x easier to understand!
    Hardcore Games Legendary is the Only Way to Play!

  • Windows 2008 Cluster question on using a new cluster drive source from shrinking existing disk

    I have a two node Windows 2008 R2 enterprise SP1 cluster. It has a basic cluster setup of one (Q:)quorum disk and data disk (E:) which is 2.7tb is size. This cluster is connected to a shared Dell Disk array.
    My question is can I safely shrink the 2.7tb drive down and carve out a disk size of 500gb from the same disk and use for a new cluster disk resource. We want to install Globalscape SFTP software on this new disk for use as a cluster resource.
    Will this work without crashing the cluster.
    Thanks,
    Gonzolean

    Hi ,
    Thank you for posting your issue in the forum.
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Thank you for your understanding and support.
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

  • Add Windows Server 2012 R2 domain controller to Windows 2008 R2 domain

    Hi,
    Have today 2 x Windows Server 2008 R2 domain controllers, and domain and functional level 2008 R2.
    We now want to replace these DC`s with Windows Server 2012 R2.
    My plan is as follow
    - Install and promote a Windows Server 2012 R2 as a 3 DC`s with a temporary hostname and IP as DC3
    - Install and promote a second Windows Server 2012 R2 as a 4 DC`s with a temporary hostname and IP as DC4
    - Decomiss DC1 and remove this host. Change the IP and hostname of the new DC3 to DC1
    - Move FSMO roles from DC2 to DC1 and decomiss DC2
    - Change the IP and hostname of the new DC4 to DC2
    Will this be a ok progress ? I will offcours to have the DC`s replicate information between them before doing each task.
    /Regards Andreas

    Hi,
    Only error i got running dcdiag was the following
     Starting test: NCSecDesc
        Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
           Replicating Directory Changes In Filtered Set
        access rights for the naming context:
        DC=ForestDnsZones,DC=domain,DC=local
        Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
           Replicating Directory Changes In Filtered Set
        access rights for the naming context:
        DC=DomainDnsZones,DC=domain,DC=local
        ......................... DC1 failed test NCSecDesc
    Is this a problem ?
    I would guess not since im not implementing a RODC ? Ref:
    https://support.microsoft.com/en-us/kb/967482?wa=wsignin1.0
    You can ignore it.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Update Windows Root Certificates in Windows 2008 R2 Disconnected Environment using WSUS

    Hi all, I need to update the root certs on all my WIndows 2008 R2 servers. They have no internet connectvity. I am aware of the issue described by
    KB931125 but I am not affected by it. My issue is that I would like the 2008R2 servers to update the roots certs form my WSUS servers. Is this possible?

    I would suggest that you identify the few individual root certificates that you need, and import them individually to those servers where they are needed.
    It is NOT possible to update root certificates from a WSUS server, except in the case of workstations that are being configured to install KB931125.
    Do NOT install KB931125 to a server operating system.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Windows 2008 R2 Domain Controller, Tracking of helpdesk staff invloved in unlock account, password reset

    Dear All,
    We recently gave permissions to group of level 1 staff to unlock OR reset password of users. In case user calls and report his account is locked OR if his password expires.
    I want to track by auditing just in case something goes wrong, I can check in auditing. I have created a new GPO and select success/failure for Computer Config > Windows Settings > Security Settings > Local Policies > Audit Policy "Audi
    Account Management"
    applied it on domain top level and I did not changed settings of 'default Domain Policy' which is also linked on top level of domain.
    But after applying this I am unable to see any event 4724 of password re-set when I attempted to test this GPO. What else is required to be done in order to trace users in group 'level1' if they change any body password.
    Please assist.
    thank you

    Hello,
    Total two DC's in our environment. But now I figured out and it is working now. It was supposed to set in Advanced audit policy > User account management, I enabled it for success and failure and my newly created GPO is applied on domian top in addition
    to default domain policy.
    I am able to see unlock events, password change events in my security log. So, it is working.
    Thank you,
    Wajeeh

  • Windows Server 2012 DFS on a Windows 2008 R2 domain

    Hello All,
    Quick question. We would like to take advantage of the improvements in DFS replication provided by Server 2012. However I am hesitant to upgrade our domain controllers (currently running 2008 R2. My question is.
    Can DFS replica partner servers currently running 2008R2 be upgraded (preferably in place) to Server 2012 and managed by 2008 R2 DC's?
    If so what do I lose by not having 2012 DC? Any issues to speak of?
    This topic first appeared in the Spiceworks Community

    The only true intellectual property (IP) for Internet companies is not scale or infrastructure but data, both in terms of quality and quantity, Flipkart's outgoing CTO Amod Malviya said during his keynote address on the future patterns in data processing at The Fifth Elephant conference in Bangalore."Today, I understand better than a Samsung why a particular phone sells less or more as against its competition. I am able to do that because I have access to a lot more fine-grain data about customer behaviour as and when they come on to a product page and what is the actual product that they end up buying." Malviya said."At what point in time I start using that in order to make this IP useful is a separate matter but that doesn't take away the fact that data is really the true IP." he added...Read More
    Read More

  • Trouble connecting LaserJet6p to Windows 7 64 bit computer using usb to parallel printer cable

    The printer isn't responding at all--not even a test page. I've verified that the correct driver is installed and the computer does recognize the printer (even as the "default").
    Any suggestions?   The computer is working with my other printer through blue-tooth,,,,
    Thanks!
    Paul

    The USB-parallel cable needs a driver that supports Windows 7 x64 in addition to the driver the printer needs.  Additionally make sure the port settings are correct, usually the port will be something like USB001: or USB002: for the USB-parallel port. Some cables may provide a virtual LPT port such as LPT3:.  Check the documentation for your unit for details.
    The posts here list models of USB-parallel ports folks here have had success with in Windows 7.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for