Loging on new client copying from 0000 with SCC4 is failure(ECC6)

Hi,Expers:
Now I have a quesion: After I finished the ECC 6 Installation, I want to copy a new client.
So I log on the client: 000 with name: SAP*, and finished copying a new client :100 with tcode: SCC4.
Then I log off the SAP system and restart the SAP MMC and OS.After that, I log on the SAP client:100 with name :SAP*.
but, I can't log in the new client:100 ,system shows error messages: Name or password is in correct (repeat logon).
Have logon Name: SAP* any issues: password or the other reasons?
Have anyone the question??
Plesase help me solve the issue, Thanks in advance

Hi Lin,
After new installation we have to changed setting in instance file for use sap* user in new client.
First you import the profile.
The user name SAP* is only active if the profile parameter login/no_automatic_user_sapstar does not have the value 1.
Regards,
Anil

Similar Messages

Client Copy from BWP to BWT

I had a problem with my List Cube Transaction and for that reason, I had a look at the Infoprovider and also the Data Sources.
When tried to execute the infoproviders in LISTCUBE, the following messages are being displayed in BWT system:
1. Error reading the data of InfoProvider ZIP_RC_01
2. There is still no data source assigned to VirtualProvider ZIP_RC_01
But, when executed the same in BWD, then it is working fine.
I have checked the Data Sources in the R/3 Dev system and the DS has no problem. But, when I check the DS in the R/3 Prod (SS in BWT system), the following error message is displayed in the status bar:
"DataSource Z_IP_RC_DS_1 is not defined in the source system"
I thought, as the system says the Source system is not available, hence the problem in LISTCUBE and thought if we transport the DS again and then replicate in BW, then our problem would be resolved.
But, seems that even though the source system says "PRD300", if I look at SM59 it actually points to our QAS system. It says PRD300 because BWT is a copy down from BWP, and that's the source system we use - in other words the logical name is the same, but the actual servers are different.
In any case, the datasource is transported to our QAS enviroment.
So, once we do a client copy from Prod to Test, even the source systems get copied. If yes, then does it really affect in case of replications and transports???
I am really confused in this part...please explain.
Thanks & Regards

Hi,
It looks like the basis team, or whoever performed the Copy from production to QA box hasn't finished all the necessary Steps :
Main transaction to know:
SSC4 -> To create new client
SCCL -> Client copy within local system
SCC9 -> remote client copy
SCC3 -> display client copy log
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c4e4ba111d189750000e8322d00/content.htm
http://www.sap-basis-abap.com/bc/client-copy-from-production-to-quality-server-to.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci552257,00.html
Probably sounds like transaction BDLS hasn't been done.

Logical system on QAS after remote client copy from PRD to QAS

I wander after remote client copy from PRD to QAS do I have to change Logical system on QAS. Do I have to run some postprocessing program?
Thank you in advance

Hi Branko,
After the system copy, go to transaction SALE -> Sending and receiving Systems -> Logical systems -> Define Logical System , click New Entries and create a new logical system for your QAS; then go to SALE -> Sending and receiving Systems -> Logical systems -> Assign Client to Logical System, click on the client, click change and assign the new Logical system.
Other activities, check Jobs, RFC's, etc...
Regards
Juan
Please reward with points if helpful

Large size file could not copy from "Open with explorer" in SharePoint.

Hi,
I have uploaded around "120 mb" file in Document Library. I was trying to copy that file from "Open with explorer" to my local system. I am getting "disk Space error".
Should i specify any size at any where in "Central Admin".
Thanks & Regards
Poomani Sankaran

To resolve this issue, follow these steps:
1. Click Start,
click Run, type regedit,
and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
3. In the right pane, right-click the FileSizeLimitInBytes value,
and then click Modify.
(If
FileSizeLimitInBytes does not exist then right-click the blank space in the right pane, click New, click DWORD
Value, type FileSizeLimitInBytes,
and then click OK)
4. Click on Decimal,
and type 4294967295 and click OK. Note The
default value for the file size limit is 50000000 bytes.
5. Quit Registry Editor. Restart the computer.
CAUSE
This issue occurs because a security change that was introduced in Windows XP SP2 affects the Web Distributed Authoring
and Versioning (WebDAV) redirector. This security change makes sure that an unauthorized server cannot force a client computer into a denial of service attack. If you try to download a file that is larger than 50000000 bytes, the client computer interprets
this download as a denial of service attack. Therefore, the download process stops.
IMPORTANT
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base
How to back up and restore the registry in Windows
http://support.microsoft.com/kb/322756

Default sap* password for new client copy ?

Hi Basis Expert,
What is the default password for sap*, i have create new client with SCC4 and i tried to login but failed.
please advise what is the default password for sap*.
i am using Netweaver 7.0 SP16.
Thank you and best regards
Fernand

Hi!
If you followed the procedure, you should have set the profile parameter login/no_automatic_user_sapstar to 0 and restarted application server. After that you can login using SAP* and password PASS.

Create a new Client Copy Profil

Hi,
is there a standard application to add a individual client copy profil to table CCPROF ?
Reason: The client copy via TDMS does not copy the report variants ( note 1159279 ). So I would like to transfer only variants with SCCL or SCC9. The ABAP RSTRANSP creates a transport order with ABAP variants but ignores variants of queries.
Regards
p121848

I don't think so.
About the variants read,
https://cw.sdn.sap.com/cw/docs/DOC-44242
Regards
Juan

I have bought new i pad2 from singapore with 4.3.3 upgraded version. Working very good but suudenly 2 days back wifi signals started droping. Cannot connect wifi properly as comparitively my oth devices like iphone and pc's. please suggest what to do.

I have bought new i pad2 from singapore. Working very good but suddenly from last two days wifi signals started dropping. Having problem to get proper wifi signals even at my home as comparitively with my other devices like iphone4 and pc's. Please suggest some conclusion and tell what to do.
Thanks

Bikramvenus-
I believe an iPad 2 is still within the warrantee period. I suggest you contact Apple for advice on how to proceed. Since I don't know where you are, you can start by going to <Country> to select a different location. Then look for a Support tab and a Contact Us link.
Another alternative is to search for an iPad repair center. If you are lucky, there may be one in your city. I do not know what they might charge.
Fred

How to Create new database (copy all table with data excluding 2 table )with existing database.

Please follow the scenario:
using C#
1) current database file name is DB20122013.
when user click on new year button
2)Create backup copy of current database
3)New database should create with all table(excluding table "Dailytemp" and "DailyMain") with data and database name as DB20132014.
Musakkhir Sayyed.

Hi,
I hope, below stored procedure is useful for your scenario.
CREATE PROC Create_New_Database
( @DBNAME VARCHAR(550)
)AS
Test : Exec [Create_New_Database] @DBNAME='DB20122013'
BEGIN TRY
SET NOCOUNT ON
DECLARE @sql VARCHAR(MAX), @DBNAME_NEW VARCHAR(550),@num int
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME) AND ISNUMERIC(RIGHT(@DBNAME,4))=1
BEGIN
SELECT @num= RIGHT(@DBNAME,4)
SELECT @DBNAME_NEW='DB'+CAST(@num AS VARCHAR(10))+''+CAST(@num+1 AS VARCHAR(10))
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME_NEW)
BEGIN
SELECT @DBNAME_NEW+' database already exists'
END
ELSE
BEGIN
SET @sql='USE '+@DBNAME+' '+' backup database '+@DBNAME+' to disk = ''C:\'+@DBNAME+'.bak'' '
+' restore database '+@DBNAME_NEW+' from disk = ''C:\'+@DBNAME+'.bak'''
+' with move '''+@DBNAME+''' to ''C:\'+@DBNAME+'_data.mdf'' ,
move '''+@DBNAME+'_log'' to ''C:\'+@DBNAME+'_log.log'''
EXEC (@sql)
SET @sql=''
SET @sql=' USE '+@DBNAME_NEW+' IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''Dailytemp'')
BEGIN DROP TABLE Dailytemp END IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''DailyMain'')
BEGIN DROP TABLE DailyMain END '
EXEC (@sql)
END
END
ELSE
BEGIN
SELECT 'Database is now found or Database name does not mach the scenario'
END
SET NOCOUNT OFF
END TRY
BEGIN CATCH
DECLARE @ErrorMessage NVARCHAR(4000)
DECLARE @ErrorSeverity INT
DECLARE @ErrorState INT
SELECT @ErrorMessage = ERROR_MESSAGE(), @ErrorSeverity = ERROR_SEVERITY(),@ErrorState = ERROR_STATE()
RAISERROR (@ErrorMessage,@ErrorSeverity,@ErrorState )
END CATCH;
GO
Regards,
RAMBHARATH

Adding New WTs (Copied from WT Catalogue) to Custom Forms

Hi,
I created new WTs by copying them from the WT catalogue. I am now required to add these WTs to custom forms used in our payroll system, i.e. remuneration statement; how would I go about doing this? Since I copied these WTs they should be added to forms with the original WTs presentu2026I just need to know the transaction code or path where I can go to add these WTs.
Thanks!!

Hi,
please go to tran sm30 - enter the table V_512W_D where you need to mantain evaluation class.

How to set up sync on new laptop away from desktop with only iphone/home access

I am away from my regular desktop and have a laptop I would like to set up with sync and only have me synced iphone with me and no access to sync key on main computer
Iphone is logged in and I do not want to erase data stored on sync server by creating new key
Any help appreciated

Hi rogues!
It something that can be done but the iPhone is not going to help you. Firefox Home is a little bit different and it doesn't have that functionality built in.
You need the Recovery Key (sometimes known as Sync Key) and to follow these instructions: https://support.mozilla.com/en-US/kb/How%20to%20sync%20Firefox%20settings%20between%20computers#w_what-if-im-not-near-my-first-computer
Unfortunately, if you are far away from your computer you will not be able to get the Recovery Key if you don't already have it:
https://support.mozilla.com/en-US/kb/how-do-i-manage-my-firefox-sync-account#w_where-can-i-find-my-recovery-key

New query copying from existing query

Hi,
I want to create a new query through query designer. New query should be same as existing one query.
That is i want my new query will be a copy of existing query. let me guide how to make a new query which is copy of existing one.
Regards
Deep

Hi,
As told above you can copy Queries from one Target to another Target by RSZC, if the fields are same in both the Info Providers.
Or else open your existing Query and slect Save as give new Technical name.
Reg
Pra

Is data dvd copied from mac with itunes 7 work with windows itunes 7

I have a new laptop pc. My itunes library is on my emac. I want to authorize the laptop and put my itunes library on both computers. If I back up my itunes library on DVD from my mac desktop can I use the DVDs to load my library onto the laptop pc. Both computers use itunes 7.
Thanks!

iTunes: Moving your iTunes Music folder
Regards,
Colin R.

No Variable Interest Rate ot in new product copied from 55A

Hello
I have created new product typep by copying the product type 55A. While all the config seems to be coeect and the product type is also posting all the entries correctly, the product type does not show the variable interest rate option in the drop down when creating the in TM_51.
The condition type for interest is a copy of 1200 condition type so should not be a problem.
Please advise how to resolve this.
Best Compliments
S
Edited by: sapcounts on Dec 19, 2011 1:00 PM
I was missing condition type 1120

Hi ,
In addition to the condition type 1200 (Nominal interest ) it is necesary to copy the condition type 1210 for interest rate adjustment , then it will display the interst rate adjustment in the structure tab of the Interest rate instrument .

Copying from DAT with Audigy2NX (via SB optical li

Hi everybody,
as my DAT player/recorder is going to die, :'( I would like to backup all
my digital tape collections on my PC, and subsequently put all on CDs.
My Sony DAT tape has a digital optical output, and my external Sound
Blaster Audigy2 NX has a digital optical input, so I thought I could connect
the DAT tape to Audigy.
The problem is that I don't know how to extract the digital stream coming
from the DAT tape and record onto the PC (for example like WinDAC does
for audio CD track extraction).
Is it possible to digitally extract informations with Audigy optical link ?
And how ?
Thank you for any advice,
Diabolik

Nobody knows if there's a solution to this issue ? :-(Message Edited by Diabolik on 0-25-2006 0:36 PM

SAP_ALL & SAP_NEW profiles not available in new client after client copy

I am setting up a BI Client and have been following some documentation to do this downloaded from SDN. In the process, i created my client 'client 200' assigned to a logical system then doing client copy from 'client 000' using transaction SCCL. There is a step when i now have to create a user in the new client (client 200 ) where i am supposed to assign the user to profiles SAP_ALL and SAP_NEW. Unfortunately these are not available in my newly set client but in 'client 000' they are available.
Did i make some error in the client copy process or i still need to do something to have the profiles in 'client 200'. Please assist.

There is no issue in rerunning the Client Copy.
But please check what mistake you made in the first one.
Here are the steps.
Create an entry in SCC4.
RZ10 modify parameter login/no_automatic_user_sapstar=0
Check that you have enouf background and dialog processes.
Restart the sap system
then login with SAP* in the Client you made.
Run Sccl and give the Profile SAP_All
Select the source Client as 000
and Source Client user Master as 001
Check tthat you dont select the check box of TEST MODE.
and schedule in backgreond.
Thanks Rishi Abrol

Loging on new client copying from 0000 with SCC4 is failure(ECC6)

Similar Messages

Maybe you are looking for