Loginscript via GPO does not work when local admin

Hi
We are in the middle of deploying Windows 8.1 to our
organization. We are using Windows 7 Pro today. We a mapping network drives
with a logon script via GPO. It is done with the good old net use commands that
has been working for years e.g.:
net use K: \\server1\Data /PERSISTENT:YES
net use L: \\server1\Design /PERSISTENT:YES
It works perfectly on Windows 7, but on the new
Windows 8.1 machines, no network drives are mapped. I can see that the GPO are
applied fine to the machines. It seems to have something to do with UAC and the
fact that the users is local admins. If I remove the use from the administrator
group, the script works fine and the drives are mapped just like in Windows 7 (5
minutes delayed, but it works...!). If I keep the user in the administrator group
and instead disable UAC by setting the EnableLUA to 0 in the registry it works
too, but then it gives me a lot of other issues with Metro apps and the Windows
Store.
Has anyone found a good solution to map network drives
for users that needs to be local administrators, without disabling UAC completely
in the registry?
Any help would be
appreciated!
Thomas | MCP | http://www.techwork.dk

Thank you Techguy
"Group Policy Preference Drive Maps", does not just resolve my issue it does also give me some a lot of new awesome options I don't have with net use commands via GPO :-)
I have not tested it with Windows 7 yet, but I am pretty sure it will work there too
Thomas | MCP | http://www.techwork.dk

Similar Messages

SCVMM 2012, Conntect via conosle does not work when logged in with specified credentials

Hi all
I have a problem with the SCVMM 2012 console. When I start the console I select the "Specify credentials" option and then I enter my admin credentials. Afterward the console opens
and everything works except the "Connect via Console" function.
When I try to connect to a VM I get the following message:
Virtual Machine Manager lost the connection to the virtual machine for one of the following reasons: Another connection was established to the console of this machine. The virtual machine has been shut down or put into the saved state. The user credentials
provided do not have the necessary privilege to connect (0x0003, 0x0300)
It seems that the Virtual Machine Viewer runs not under the admin credentials which I enter at the beginning and therefore the console cannot connect.
Has someone the same issue ? Is it by design that the console connection does not work with specified credentials or is a sort of a bug or error ?
Thx
J0fe

Being new to SCVMM, I've just come across this issue myself, though I came to a different (not necessarily better, but good enough for me) resolution.
I have a somewhat convoluted but not abnormal configuration where the SCVMM server lives in a separate untrusted forest to that which the Hyper-V Server hosts live.
As people have noted in this and other threads, the VirtualMachineViewer.exe process launches in the same security context with which you logged onto your pc. While the VmmAdminUI.exe process also runs in the same security context,
the network logon it issues makes use of the credentials provided at the SCVMM MMC's logon screen, which VirtualMachineViewer.exe does not.
I elected to use Credential Manager to resolve this issue.
In Credential Manager, I created a "Windows Credential" entry where the hostname matched the FQDN of the hostname that appears within SCVMM as the virtual host entry. Using an IP does not match if you've used an FQDN in the SCVMM
registration, and vice versa. If you used an IP for the host in SCVMM, then you need to supply that IP as the hostname in Credential Manager, and likewise if you used a FQDN.
This solution isn't perfect as it requires you to manage numerous Credential Manager entries (one per host), but that still appealed to me far more than one per guest. If I had a larger environment, I'd script the account configuration
given it only needs to happen once per host, rather than on an ongoing basis of once per guest as some of the above approaches would require.
I haven't tested the different combinations to verify the least permissions required. For the time being I've gone with the model of using a non-privileged domain user account (to avoid managing multiple identities and passwords)
which I added to the local Administrators group of each Hyper-V Server host. This stuck me as being a sound enough compromise between rigid security and ease-of-administration (given the per host arrangement in Credential Manager).
With the account correctly specified in Credential Manager, I'm able to move on past the 0x0003 error and successfully use the remote function.
If I was to point out an upside to this, it would be that this approach would allow me to remote Hyper-V servers in untrusted forests (including workgroups), which is something I couldn't do if the VirtualMachineViewer.exe process
did in fact use my SCVMM credentials alone. Ultimately, that's something you have to come to terms with yourself, though.
Cheers,
Lain
Thanks a bunch Lain, this helped! I'd still consider this a bug, however, and not a workable solution for a large number of servers/admins... But for now this does the trick, thanks!

HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Reply to all using ItemReply does not work when specifying messageid

Hello everyone,
I am trying to use the ItemReply token to perform a "Reply to All"
action on a mail item with a known message identifier and include the
original message text in the response. According to the documentation,
the call should be:
ItemReply(7;1;"message-id")
Still, when I execute this token, apparently only a normal reply action
is performed because only the original sender is listed as recipient.
(The message text is properly included)
However, when I manually select the message in the GroupWise client
first and then execute the same call without specifying the message id,
all recipients of the original mail are listed in "To:" as expected:
ItemReply(7;1)
Could it be that the "ReplyTo" parameter is ignored or does not work
when a message id is specified as parameter? (Setting "IncludeText" to 0
does not change anything)
Thanks in advance and best regards,
Peter Hofer

Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

My App Store does not work when trying to update applications

My Apo store does not work when I try to update applications that need to be updated

There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them.

Siri does not work when used for calling a contact function

Siri does not work when used for calling a contact function

Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it.

The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen

the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.

Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV

Dbx does not work when debugging g++ exes.

Hi,
We are just getting started building our application on redhat el5 with sunstudio 12.
We are compiling and linking our app with gcc 4.1 as we need to be able to link against some 3rd party libraries build on rhel4 that we do not have source for.
We now can compile and link fine but dbx does not work when it is fed the executable.
We get the error
dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT[
and dbx freezes.
Note : This is built with -m32 on a 64bit kernel. Also we have not yet rebuilt all the opensource libs used on gcc 4.1 as we have a large number of them.
Any ideas ?
The complete output of running dbx :
Output from dbx :
debug /ps_rels/Dev/linux_rhel5/exe/sx
Reading sx
Reading ld-linux.so.2
Reading libz.so.1
Reading libxerces-c.so.27
Reading libxalan-c.so.110
Reading libxalanMsg.so.110
Reading libsde.so
Reading libsg.so
Reading libpe.so
Reading libsqlite.so.0
Reading libsqlite3.so.0
Reading libgeos.so.2
Reading libpng12.so.0
Reading libX11.so.6
Reading libXm.so.4
Reading libXt.so.6
Reading libXi.so.6
Reading libXext.so.6
Reading libXrender.so.1
Reading libfreetype.so.6
Reading libexpat.so.0
Reading libfontconfig.so.1
Reading libcairo.so.2
Reading libglib-2.0.so.0
Reading libgmodule-2.0.so.0
Reading libgobject-2.0.so.0
Reading libgthread-2.0.so.0
Reading libpango-1.0.so.0
Reading libpangocairo-1.0.so.0
Reading libpangoft2-1.0.so.0
Reading libatk-1.0.so.0
Reading libgtk-x11-2.0.so.0
Reading libgdk-x11-2.0.so.0
Reading libgdk_pixbuf-2.0.so.0
Reading libtiff.so.3
Reading librt.so.1
Reading libwx_gtk2_xrc-2.8.so.0
Reading libwx_gtk2_qa-2.8.so.0
Reading libwx_gtk2_html-2.8.so.0
Reading libwx_gtk2_adv-2.8.so.0
Reading libwx_gtk2_core-2.8.so.0
Reading libwx_base_xml-2.8.so.0
Reading libwx_base_net-2.8.so.0
Reading libwx_base-2.8.so.0
Reading libboost_thread-gcc-mt-1_33_1.so.1.33.1
Reading libboost_filesystem-gcc-mt-1_33_1.so.1.33.1
Reading libncurses.so.5
Reading libnsl.so.1
Reading libdl.so.2
Reading libACE.so.5.5.1
Reading libpthread.so.0
Reading libpam.so.0
Reading libm.so.6
Reading libc.so.6
Reading libstdc++.so.6
Reading libgcc_s.so.1
Reading libicuuc.so.34
Reading libicui18n.so.34
Reading libstdc++.so.5
Reading libXau.so.6
Reading libXdmcp.so.6
Reading libXmu.so.6
Reading libXp.so.6
Reading libXft.so.2
Reading libjpeg.so.62
Reading libSM.so.6
Reading libICE.so.6
Reading libexpat.so.1
Reading libXfixes.so.3
Reading libXrandr.so.2
Reading libXinerama.so.1
Reading libXcursor.so.1
Reading libXxf86vm.so.1
Reading libaudit.so.0
Reading libicudata.so.34
Reading libnss_files.so.2
Reading libnss_dns.so.2
Reading libresolv.so.2
dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT
Reading libnss_ldap.so.2
Reading libcom_err.so.2

Well, this message is just a warning and should not prevent dbx from working. What exactly happens to dbx? Does it hang? Does it crash? Or it doesn't allow to run the app?
A side note: this message says that runtime linker debugging interface reported "consistent" event w/o any "add" or "delete" events, which is at least redundant and may indicate a bug. It is possible though that the bug is in dbx as well as in ld-linux.so, but its impossible to tell without live test case.

The dropdown list in the address bar does not work when clicked

In the address bar the dropdown list icon does not work when clicked. I have tried resetting everything in safemode and it still doesn't work. When I click on the icon it just highlights the entire address line.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Also check the setting in:<br />
[http://kb.mozillazine.org/Menu_differences Firefox > Preferences] > Privacy > Location Bar: When using the location bar, suggest: History, Bookmarks, History and Bookmarks

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

Css3 animation does not work when triggerd by backing bean method

Hi,
I use Jdev 11.1.1.4 (but I guess the Jdev/ADF version does not matter in this case) and Firefox 15.0.1.
I tested some parts of article https://blogs.oracle.com/groundside/entry/css_animations_the_panel_flip from Duncan Mills.
The CSS3 animation for styleClass "rotateOut" works fine when I trigger it from mouse hover.
The problem is that the animation does not work when I set the styleclass in a backing bean.
In this case the UI component to rotate (in my case the calender component) changes immediatelly to the transition target without the transition-duration of 2 seconds and therefor there is no animation effect visible for the user.
Here the backing bean code:
    public void doRotate() {
       afCalender.setStyleClass("rotateOut");
       AdfFacesContext.getCurrentInstance().addPartialTarget(getAfCalender());
    }Here the skin:
.rotateOut {
    -moz-transition-property: -moz-transform;
    -moz-transition-delay: 2s;
    -moz-transform: rotateY(45deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
.rotateReturn {
    -moz-transition-property: -moz-transform;
    -moz-transform: rotateY(0deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
}In Duncan's article java script is used to change the style class.
Does the CSS3 animation only work when java script is used to change the style class or shoud java in a backing bean also work?
Any hints?
regards
Peter

I have tested several other settings but no success.
Any ideas?
regards
Peter

HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps. It also has stop work when trying to down load new Apps. Any suggestions out their???

For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???

I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

Youtube does not work when i am using wifi on iphone 4

the youtube does not work when i use wifi. it works perfectly when i use 3 g network ..

At home when i use my Wi-Fi it work normal, but as soon as i go out, for example on the bus or at work it keeps saying "Cannot connect to Youtube".

Loginscript via GPO does not work when local admin

Similar Messages

Maybe you are looking for