Loginwindow not responding – a solution

A user on our network could not log out of his account. In the activity monitor, the loginwindow process appeared red and was marked "Not responding".
Manually quitting loginwindow enabled him to log out immediately but the problem recurred when he logged back in.
We tried quite a few things so I'm not sure which step was the most important but the issue has now disappeared.
Steps taken:
- Repaired permissions
- Trashed loginwindow preferences file (com.apple.loginwindow.plist)
- Removed all items from Login Items (In the Accounts preference pane)
- Trashed all the LaunchServices files in /Library/Caches
- Rebooted from the command line with "sudo reboot now"
Hope this helps.

thanks. tried that. it asks me to re-login after reboot as expected. problem persists once full restart is complete. i don't think it's plist corruption.
i also reapplied the 10.5.2 combo upgrade but no help
i'm also seeing severe network performance degradation. use the macmini to serve video files across gigE network and very erratic behavior. no new software/mod installed (very bare bones machine), only noticed these problems after 10.5.2 upgrade.

Similar Messages

Loginwindow (Not Responding) after iTunes & Quicktime update

In order to activate my new iPhone this morning I needed to upgrade to iTunes 7.5 and the corresponding Quicktime update. After a reboot and logging in I was presented with the desktop, the dock and a spinning beachball . . . which still hadn't gone away after 10 minutes.
After a while I tried a few things and noticed that the dock was working, until I ctrl clicked on the finder icon that is. After that the dock froze and I rebooted with a long power button press. After logging again I had the same problem, desktop, working dock and spinning beachball.
This time I hit one of my dock stacks and launched the Activity Monitor, only to discover that a process called 'loginwindow' was Not Responding. On force quitting this everything went away and I was back to the login prompt. I logged in again and found the same thing - I can use all the applications I can get to through the dock but have no finder . . .
Any ideas?? HELP!!

OK, here's /var/log/system.log from boot. Are the following two lines significant??
Nov 10 21:40:43 Macintosh com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[119]): Exited: Terminated
Nov 10 21:40:43 Macintosh com.apple.launchctl.Aqua[131]: launchctl: Couldn't stat("/etc/machinit_peruser.d"): No such file or directory
Nov 10 21:39:57 localhost kernel[0]: Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
Nov 10 21:39:47 localhost com.apple.launchctl.System[2]: /dev/disk0s3 on / (hfs, local, journaled)
Nov 10 21:39:49 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Nov 10 21:39:49 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Nov 10 21:39:49 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Nov 10 21:39:54 localhost fseventsd[31]: event logs in /.fseventsd out of sync with volume. destroying old logs. (19369 21 20061)
Nov 10 21:39:58 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 10 21:39:54 localhost fseventsd[31]: log dir: /.fseventsd getting new uuid: C00E1A09-A514-48BA-A79D-C46786E0EE9E
Nov 10 21:39:58 localhost kernel[0]: vmpagebootstrap: 380993 free pages and 12223 wired pages
Nov 10 21:39:58 localhost kernel[0]: migtable_maxdispl = 79
Nov 10 21:39:58 localhost kernel[0]: 105 prelinked modules
Nov 10 21:39:58 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Nov 10 21:39:58 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Nov 10 21:39:58 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 10 21:39:58 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Nov 10 21:39:58 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Nov 10 21:39:58 localhost kernel[0]: calling mpopolicyinit for mb
Nov 10 21:39:58 localhost kernel[0]: Seatbelt MACF policy initialized
Nov 10 21:39:58 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Nov 10 21:39:58 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 10 21:39:58 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 10 21:39:58 localhost kernel[0]: MAC Framework successfully initialized
Nov 10 21:39:58 localhost kernel[0]: using 7864 buffer headers and 4096 cluster IO buffer headers
Nov 10 21:39:58 localhost kernel[0]: IOPCCard info: Intel PCIC probe: TI 1510 rev 00
Nov 10 21:39:58 localhost kernel[0]: FireWire (OHCI) Apple ID 31 built-in now active, GUID 001124fffe75e670; max speed s800.
Nov 10 21:39:58 localhost kernel[0]: mbinit: done
Nov 10 21:39:58 localhost kernel[0]: Security auditing service present
Nov 10 21:39:58 localhost kernel[0]: BSM auditing present
Nov 10 21:39:58 localhost kernel[0]: rooting via boot-uuid from /chosen: BAD0DFF0-4023-381B-8C51-E904679A62CC
Nov 10 21:39:58 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 10 21:39:58 localhost kernel[0]: Got boot device = IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiATA/ATADev iceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/ST91008 23A ST9100823A/IOApplePartitionScheme/Untitled@3
Nov 10 21:39:58 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Nov 10 21:39:58 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 6728192 to: 4701696 (joffset 0x8601000)
Nov 10 21:39:58 localhost kernel[0]: CSRHIDTransitionDriver::start []
Nov 10 21:39:58 localhost kernel[0]: CSRHIDTransitionDriver::switchToHCIMode legacy
Nov 10 21:39:58 localhost kernel[0]: USBF: 22.539 CSRHIDTransitionDriver[0x2a10f00](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
Nov 10 21:39:58 localhost kernel[0]: CSRHIDTransitionDriver... done
Nov 10 21:39:58 localhost kernel[0]: E:[AppleUSBBluetoothHCIController][FindInterfaces] mInt0InterruptMaxPacketSize = 16
Nov 10 21:39:58 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Nov 10 21:39:58 localhost kernel[0]: HFS: Removed 5 orphaned unlinked files or directories
Nov 10 21:39:58 localhost kernel[0]: Jettisoning kernel linker.
Nov 10 21:39:58 localhost rpc.statd[22]: statd.notify - no notifications needed
Nov 10 21:39:59 localhost bootlog[39]: BOOT_TIME: 1194730773 0
Nov 10 21:40:00 localhost kernel[0]: Resetting IOCatalogue.
Nov 10 21:40:00 localhost kextd[12]: 0 cached, 423 uncached personalities to catalog
Nov 10 21:40:08 localhost DirectoryService[35]: Launched version 5.0 (v514)
Nov 10 21:40:08 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[27]: Login Window Application Started
Nov 10 21:40:08 localhost DirectoryService[35]: WARNING - dsTouch: file was asked to be opened </Library/Preferences/DirectoryService/.DSIsRunning>: (File exists)
Nov 10 21:40:09 localhost kernel[0]: UniNEnet: Ethernet address 00:11:24:75:e6:70
Nov 10 21:40:09 localhost blued[50]: Apple Bluetooth daemon started.
Nov 10 21:40:11 localhost /usr/sbin/ocspd[55]: starting
Nov 10 21:40:11 localhost ifcstart[29]: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: Sat Nov 10 21:40:11 localhost ifcstart[29] <Warning>: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
Nov 10 21:40:11 localhost ifcstart[29]: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only.
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: Sat Nov 10 21:40:11 localhost ifcstart[29] <Error>: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only.
Nov 10 21:40:11 localhost ifcstart[29]: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: Sat Nov 10 21:40:11 localhost ifcstart[29] <Error>: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned
Nov 10 21:40:11 localhost /usr/libexec/ifcstart[29]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Nov 10 21:40:12 localhost mDNSResponder mDNSResponder-161.1 (Oct 11 2007 00:22:27)[26]: starting
Nov 10 21:40:13 localhost mDNSResponder[26]: Adding registration domain jodrell.members.mac.com.
Nov 10 21:40:20 localhost kernel[0]: Matching service count = 0
Nov 10 21:40:21: --- last message repeated 5 times ---
Nov 10 21:40:21 localhost kernel[0]: wl0: Broadcom BCM4320 802.11 Wireless Controller
Nov 10 21:40:21 localhost kernel[0]: 4.170.25.8.2
Nov 10 21:40:21 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:11:24:8e:52:78
Nov 10 21:40:21 Macintosh configd[37]: setting hostname to "Macintosh.local"
Nov 10 21:40:22 Macintosh configd[37]: ipconfigd: method requires address and mask
Nov 10 21:40:26 Macintosh kernel[0]: SetCryptoKey T: len 16, idx 0
Nov 10 21:40:26 Macintosh configd[37]: AppleTalk startup
Nov 10 21:40:26 Macintosh kernel[0]: SetCryptoKey R: len 16, idx 1
Nov 10 21:40:27 Macintosh SystemStarter[19]: "/System/Library/StartupItems/NMPCCardOption3gDaemonVF" failed security check: world writable
Nov 10 21:40:27 Macintosh SystemStarter[19]: "/System/Library/StartupItems/NMPCCardOption3gDaemonVF" failed security check: group writable
Nov 10 21:40:27 Macintosh SystemStarter[19]: "/System/Library/StartupItems/NMPCCardOption3gDaemonVF" failed security check: not owned by UID 0
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting MySQL database server
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting Cisco Systems VPN Driver
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Tuning TCP/IP stack for 2.5G/3G performance
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: kern.ipc.maxsockbuf: 8388608 -> 1048576
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting NMPCCardDaemonVMC
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting NMPPPMonitor
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: net.inet.tcp.slowlink_wsize: 8192 -> 65535
Nov 10 21:40:27 Macintosh com.apple.launchd[1] (0x10c1b0.nohup[102]): Could not setup Mach task special port 9: (os/kern) no access
Nov 10 21:40:27 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Version 2.1.6 will start in 30 seconds.
Nov 10 21:40:27 Macintosh com.apple.launchd[1] (0x10c1b0.nohup[104]): Could not setup Mach task special port 9: (os/kern) no access
Nov 10 21:40:27 Macintosh com.apple.launchd[1] (0x10c1b0.nohup[112]): Could not setup Mach task special port 9: (os/kern) no access
Nov 10 21:40:28 Macintosh com.apple.SystemStarter[19]: kextload: extension /System/Library/Extensions/CiscoVPN.kext is already loaded
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : attempting to attach to all available ethernet interfaces.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : interface: en1, filter attached.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : en1
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : current MTU for en1 is 1500, saving it.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : interface: en0, filter attached.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : en0
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : current MTU for en0 is 1500, saving it.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : loading cisco ipsec kernel module.
Nov 10 21:40:32 Macintosh configd[37]: AppleTalk startup complete
Nov 10 21:40:33 Macintosh loginwindow[27]: Login Window Started Security Agent
Nov 10 21:40:36 Macintosh kextd[12]: writing kernel link data to /var/run/mach.sym
Nov 10 21:40:42 Macintosh authorizationhost[124]: MechanismInvoke 0x130e00 retainCount 2
Nov 10 21:40:42 Macintosh SecurityAgent[125]: MechanismInvoke 0x103e40 retainCount 1
Nov 10 21:40:42 Macintosh SecurityAgent[125]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Nov 10 21:40:43 Macintosh SecurityAgent[125]: MechanismDestroy 0x103e40 retainCount 1
Nov 10 21:40:43 Macintosh loginwindow[27]: Login Window - Returned from Security Agent
Nov 10 21:40:43 Macintosh authorizationhost[124]: MechanismDestroy 0x130e00 retainCount 2
Nov 10 21:40:43 Macintosh loginwindow[27]: USER_PROCESS: 27 console
Nov 10 21:40:43 Macintosh com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[119]): Exited: Terminated
Nov 10 21:40:43 Macintosh com.apple.launchctl.Aqua[131]: launchctl: Couldn't stat("/etc/machinit_peruser.d"): No such file or directory
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Starts...
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'VMC3G pccard'...
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'Fusion Lite Quad pccard'...
Nov 10 21:40:58 Macintosh Dock[139]: _DESCRegisterDockExtraClient failed 268435459
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'Novatel Merlin U740 pccard'...
Nov 10 21:41:00: --- last message repeated 1 time ---
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'Huawei DATA PCCard'...
Nov 10 21:41:10 Macintosh Dock[139]: [QL ERROR] Generator database update takes too long... we will use what we currently have
Nov 10 21:41:58 Macintosh mdworker[147]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Nov 10 21:42:00 Macintosh mdworker[149]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.

10.4.9 loginwindow not responding in red freezes starting

Hi,
After updating with 10.4.9 the macbookpro freezes about 5 minutes on starting. In the processes ..the loginwindows appears in red with (Not responding) text beside..Is there anything it can be done to solve this?..can we uninstall this 10.4.9 update and return to 10.4.8?
Thanks in advance,
Regards,
Izzat

Sure. Just reinstall your bootable backup. Don't have one? Then, see http://discussions.apple.com/message.jspa?messageID=4233515#4233515 for reverting. BTW, that's the first result in a search for revert in these forums if you select by date, the first step in how to use these fourms.

MX 920 Printer Not Responding - One Solution That Worked For Me

I phoned Canon customer support and they walked me through fixing my problem. We use wireless LAN at the house.
Background:
I have a mac, my wife an iPad. We would be able to print a document, then after aprx 10 minutes I'd have to enter our router password again. Our home office was not so printer friendly. Our printer was located in an adjacent room aprx 25ft away.
Solution to OUR Problem:
Well, I finally phoned Canon Customer service and she ran me through a function test that printed out a report to check the signal strength from our router to the printer. Well, our signal strength was at 84%.
Here is the process they walked me through in order to see my signal strength and confirm my settings.
Click "Menu" , then click "Set Up" (the tool icon), then click "Device Settings", then click "LAN Settings", then click "Confirm LAN settings", then click "Print LAN settings"...then click "Yes" to Print Network Configuration Page
On that page verify:
1. that you have a IPv6 IP Address & Default Gateway (dont ask me how or what that all means...she just advised me that I should make sure that there is one in there...if there was not one in there then there was something wrong with my router or my actual connection/password)..
2. Signal Strength
She advised that it should be as close to 100% as possible.. Again, ours was at 84% and she said, "yup, thats your problem"..
Solution Day 5
The printer has been working flawlessly. I can print something out in the morning, go to the gym, come back an couple of hours later and I can print again...Before, I would have to re enter our router LAN password.
Hope this help some of you out...

Base Station Firmware: 7.2
Airport Utility: 5.2.1
Wireless Radio: 802.11n only (5.0 GHz)
Channel: Automatic
Wireless Security: WPA2 Personal
Under 'Disks' File Sharing is enabled with a disk password (as opposed to accounts or base station passwords). Guest Access is not allowed. The rest are the defaults.
Now I've been having interesting problems with USB external drives mounting on my iMac. One never did (but was always successful with FireWire) and a second one was inconsistent. The drive that I have attached to the AEBS at the moment is one that I finally made fully functional with my desktop so I don't know if that is related. I'm going to have to run a number of additional tests.
Note: my wireless is pure .n - not a mixed environment. I also had a speed issues with the iMac (wired ethernet) until I changed it from manual (100BaseT, full duplex for use with my old Belkin) to Automatic and re-enabled IPv6 which is enabled on the AEBS.

"Firefox is already running but not responding" - have tried all the usual solutions.

The message I'm getting is the standard: "Firefox is already running, but is not responding." I'm using a PC with Windows 7.
I've tried:
- Opening task manager and manually ending the process. This didn't work because the process is not listed in applications, processes, or services.
- Deleting the parent/lock file. This didn't work because the file is not in any of the firefox folders. I've checked APPDATA/Local/Firefox as well as APPDATA/Roaming/Firefox, and the original install folder just to be thorough. It's not a hidden file either - I have those set to display.
- Creating a new profile and importing settings from the old one. I can't import settings because the old profile is still running.
- Restarting before and after each of these potential solutions, including restarting in safe mode, shutting off the computer and waiting a bit before restarting, etc.
All I really want back are my bookmarks, which I've spent quite a while creating. Unfortunately, there is no file I can find for the default profile that has the bookmarks stored. When I created a new profile, a folder appeared with its name in the APPDATA/Roaming/Firefox folder, with all of the bookmarks, etc. There is no such folder for the default profile though - which is the one I want. I've even tried switching to Chrome and importing bookmarks, but that doesn't work because the bookmarks can't be imported while Firefox is still running.

Does a new profile work?<br />
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
If there is no profile present then you also get that error about "Firefox is already running but not responding"
If you uninstalled Firefox at any time in the past and removed your personal data or deleted that profile folder yourself then you no longer have a profile to start with or restore files from.
See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use

After searching in Google, resulting links will not open, get a 'Firefox not responding' message. What is the solution? Ray Allum

After doing a Google search for web sites, the reultant links will not open, a 'Firefox not responding' shows in the URL bar.

I had the same problem and my solution was to disable the PDF extension that came with Firefox 4 which belongs to another company. I found out that it wast interfering with ReaderX. I unabled it and restarted Firefox. I have had no problems since then. Go to Tools, Add-On and click on Extensions and disable the PDF extension. I hope this helps

I have a problem in the security question I hope a solution as soon as Lee does not respond change ÓćÇá Secretariat

I have a problem in the security question I hope a solution as soon as Lee does not respond change ÓćÇá Secretariat

Welcome to the Apple Community.
Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

Touchpad touchscreen problems (erratic behavior/not responding correctly/etc) temporary solution.

I bought a HP Touchpad about a month or two after it came out. It worked pretty much as you'd expect it to until some time ago. I started getting a problem where the screen would go crazy and not respond correctly to my touch inputs. Web pages would jump all over the place, cards would zoom out, etc, in other words, they would behave erratically. After some testing I noticed that certain areas of the touchscreen would NOT respond at all to inputs while others would make the screen go crazy like I mentioned previously. I looked for information on the web to see if other people where having the same problem and found reports of the same behavior. Unfortunately there where no solutions offered. At that point I tried turning on and off the Touchpad which did not resolve the problem. My next step was to try to reinstall the OS with WebOS Doctor, but I read a post where the user reported similar behavior and reinstalling with WebOS Doctor didn't fix the problem. Needless to say I was bummed out since I figured it was a hardware problem with the touchscreen. After more testing I found a temporary solution to the problem which seems to suggest that the probem could be software. The solution when you get the problem is to hold down the power button and the home button at the same time and keep them pressed until the screen shuts down and the touchpad restarts. Once the OS comes back up it works like it is supposed to until you get the next episode of screen epilepsy. At that point you need to do the procedure again and it will fix the problem temporarily. Usually the fix lasts for a few days in my case. The fix also solves other problems I have with the touchpad. Problems like, videos not playing fluidly or freezing every few seconds although the sound plays fine (youtube), sound gets messed up (sounds are played in a robot like pitch), and others. If anybody has questions or other suggestions let me know, I will answer the as best as I can.
Post relates to: HP TouchPad (WiFi)

I think the YouTube and sound problems are separate from the other erratic behaviour. Recently my touchpad won't play YouTube videos beyond certain points, starting a few seconds in possibly due to the advertising pop-ups - I can skip forwards, but that means I miss crucial parts. My sound also goes 'robot-like' until a reboot, which is incredibly annoying! Your touchscreen problems may be specific to your device - try going to Device Info / Diagnostics and see if that tells you anything.

Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

If you had never saved the file at any time, you have lost your work.
Go to; Apple Menu > Force Quit
Start a new presentation, and from now on, after adding the first object to the slide, save the file.

IPhone music will not respond to Play button after being paused. The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

iPhone music will not respond to Play button after being paused.
The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

My sound mixer and youtube is not responding..please can u fixed the problem w/ any kind of solution

my sound mixer and youtube is not responding..please can u fixed the problems w/ any kind solutions???.. thanx much...appreciate it.......ALVIN....

Alvin,
See this Link:
Solution to Fix Youtube or Other Embedded Flash Video No Sound in External Websites
Source Thread / Credits to Daniel Potyrala
NO SOUND FROM YOUTUBE VIDEOS
I hope this helps!
Good Luck!
              When you appreciate the help…
       Please Click the Kudos Star on the Left to say "Thank You"!
Is it Solved? Please Click this Post “Accept as Solution” to say "Yes!"
Remember: The more information you provide, the better help you can receive.
Always Include: (Notebook) Product Number , Printer – Model Number ,
                        Operating System and an Error Description
                             Never give out your Serial Number
                               2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

CS5 Premiere was working perfectly until last night... Now not responding. Any solutions?

Hey all,
So, for the past month I've had no problems editing with premiere. Then last night while editing on a much smaller project than normal, (same file types) the program started slowing down, considerably. Now, any keystroke puts the program into "not responding" and it takes minutes to select clips. I've restarted the computer, program, and looked at my cpu usage in the task manager. While the program is running, and then not responding, the computer is not stressing at all, 14% cpu, 31% memory.
Im running an i7 [email protected], 8gb ram, with ati hd 5770.
What i dont understand is why I've had no issues until last night, and now I cant use the product at all. My After Effects still works fine at least.
Any one else have this issue or know of a fix?

Along with TClark's questions, try doing a New Project, and test it out.
There have been reports of Project files bloating, and then not working properly. Adobe is working on that. Seems that many/most/all of those came with CS4 Projects converting to CS5. Was there any CS4 to CS5 conversion anywhere in this workflow?
Good luck,
Hunt

Receiving printer not responding on computer screen. Unplugged, reinstalled wi-fi printer...nothing.

Cannot get printer to respond. One computer will print, the other gets printer not responding message.
We have reinstalled the printer, unplugged everything to no avail. Anybody have a solution?

Hi, Sora!
So that the Community can help you better, we will need to know exactly which operating systems are running on your computers, and which applications you're trying to print from. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

PRINTER NOT RESPONDING TO COMPUTER COMMAND

I had just printed a color photo sent to me via e-mail. A few minutes later, I attempted to print a Word document and nothing happened. The printer did not respond at all.

Please read this post then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen?
If you are using Windows the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Loginwindow not responding – a solution

Similar Messages

Maybe you are looking for