Logistic handling group tab of material master

Hi,
We are actually grouping materials based on the picking types, these picking types should be visible in the material master plant data/ stor.2 view under the tab Log. handling group field.
Can anybody tell me how do I create these picking types.
Thanks
Mike

The path to create a new logistics handling group is :
Log. Execution >WH management> Planning & Monitoring -->Rgh workload estimate -->calculate workload -->maintain log. load category.
Here you would be able to create new log handling group to populate your log handling field in plant/ stor.2 view.
thanks

Similar Messages

Transportation group field in Material master..Sales/Plant data tab.

Hello Gurus,
The transportation group field in material master is Material specific or a plant specific?? caz whenever i am changing this transportation group field in one plant it is also updating with the same value in all the plant for the common material even though the Company code and Country are different forall the plants.
Hope to hear from you soon as its a very high priority production issue..
regards
Rikinl

The transportation group field in material master is Material specific or a plant specific??
Its material specific. Even if you have multiple sales areas or plants and if you change the transportation group, the change will be applicable for those areas also.
thanks
G. Lakshmipathi

" Item Category Group" in the material master?

Hi,
I'm going to use inbound delivery for purchase order, so I'm going to do it as follows:
1) Create a new "item category group Y001"
2) Create a new "item category Y001 (copy from ELN then change the movement type to 101, and set it relevant to putaway)",
3) Replace the item category group in the material master with Y001
4) Determine the item category via transaction 0184 as the following ways:
     "Delivery Type" EL    +
     "Item Category Group From Material Master" Y001    +
     "Item Usage" V     +
     'Item Category Of The Higher-Level Item"
     ==> "Determine New Delivery Item Category" Y001
My question is, If I change the item category group in the material master, is there any effect to SD part?
Thanks.

hi
General item category group
Materials grouping that helps the system to determine item categories during sales document processing.
*If a group is configured specific to distribution channel, it has priority if the corresponding activity is distribution channel-dependent
Item category group from material master
A grouping of materials that the system uses to determine item categories during the processing of sales documents.
the difference between the two lies in the specificity to the distribution channel
Regards
Raja

Which table could i find 'Authorization Group' used for Material master?

Hi experts,
Is there any table available could i find all 'Authorization Group' list as used by material master data.
OR in SPRO, anywhere could i find 'Define authorization group' for material master data specific??
Thanks.

Hi
Authorization group in the material master are maintained at the material type level.
SPRO->IMG-> Logistics - General-> Material Master-> Basic Settings-> Material Types-> Define Attributes of Material Types
List of authorization roups can be found in table T134-Material Types
this filed is a free defined 4 charcter field.
Thanks & Regards
Kishore

Change Excise Duty Group on the Material Master

What are the steps to change the excise duty group in the Material Master (MARC- OITAXGRP)? I am getting a message 'Excise duty tax group cannot be changed due to posted stock'.
We realised some of materials have been setup with incorrect excise duty group at a few plants and there have been a lot material movements posted (101s, 301s). But is the best way to fix this?
Do we have to reverse all the documents or is it good if we zero the inventory and then it will allow us to change?
Is a direct table update of the table an option?
Please advice.
Thanks in advance
Srini

you can't change the excise duty group if there is a stock for the material.
there is a steps that you need to follow if you inisist to change:
- zerorize the stock in the current period (all stock types)
- zerorise the stock in previous period (all stock types)
- then only you can change the excise duty group.
these steps can only be carried out when the two posting period are still open, so normally you should do it at month end.

Foreign Trade Import/Export Tab in Material Master of SAP R/3

Hi
What is the use of Foreign Trade Import/Export Tab in material master of SAP R/3

Hi Akhil ..
Sounds like you need to enrol for the SAP Foreign Trade training course!
The tab holds various attributes for determining Foreign Trade data - for example the Customs classification and Country of Origin. Those data are used to determine and/or populate fields in the Foreign Trade data when processing MM and SD documents.
Some, but not all, of the fields in that tab become redundant if GTS is in use.
If you have more specific questions in this area, it might be easier to give better explanations.
Regards,
Dave

Error with Valuation Category in Accounting 1 Tab of Material Master

Dear All,
I have created plant and also activated the "Split Activation" for that plant through SPRO-MM-Valuation & A/c Assignment ---Split valuation.
But when i Extend the material form another plant the "Valuation Category" field in Accounting 1 Tab of Material Master becomes INACTIVE (i.e. it becomes gray). Where as for the plant (from which i am copying the material) the same field is ACTIVE.
Please suggest me what might be the error.
I have checked the setting for both the plants i.e. in which it is working and the other where it is not working. The settings are same.
Please help.
Thanks in advance.

Hi Shailendra
If this is for a single material.
I hope u r using MM01 only by giving reference of existing mat., in this case, at this stage only you have to maintain Valuation Category.
Once the material is created, the field will become gray.
This is what I know. If still, there is any way to make this field active, if u come to know, please let me know too.

Swtiching Group in the material master number ranges

Can any one please tell me how to switch the group for the material master numbers ranges..We are in the sandbox.We already in the midway .
Thanks
JJ

go to the MMNR tcode
hit change group
keep cursor on the material type and go to
Menu - Edit-select element
it will turn in blue
than select your group adn from ment edit-hit assign element group
this will assign new group

Adding a subscreen in Plant data/stor. 1u0094 tab in Material master

Hi All,
I need to add a subscreen in material master Plant data/stor. 1 tab. Please let me know if its posible.
Warehouse management requires a primary bin and 4 alternative bin locations to be added to the material master. Four custom fields will be added in addition to the standard primary storage bin location field. These fields will be held at the branch/storage location level.
For this I enhanced MARD table with a structure contains 4 fields.
A sub-screen should be added to the Plant data/stor. 1 tab. Alternative Bin Information section should hold the additional four fields.
I want to add a sun screen under General data. This sub screen contains 4 fields for alternative storage bins.
Regards,
Venkat.

Hi,
Hi,
u'll have to do the following:
1. copy the std func group MGD1 to ZMGD1....include all ur custom screen and make sure u hav written the PBO and PAI .
Best way would be copy any standard screen and then making any change there like modifying the label.
2. next step is copying the screen sequence ( logistics-material master-configuring the material master)....01 to z1 and then assigninng all ur new program and screen name in this custom screen seq ...
and u can assign this custom screen seq to diff material type....
there is a bit of SPRO involved in this...
and check the BADI BADI_MATERIAL_REF.
<b>REWARD POINTS</b>
rEGARDS

Making acc assignment group mandatory in material master sales view

hi,
could someone help me how to make acc assignment group (sales org:2)in material master mandatory.just acc assignment group not other fields which comes along with it . thanks
kulandaivel

Hi,
For making any field in material master optional/mandatory/hide , follow the steps:
1.Just click the tab ,(Which is u want to be mandatory)and get the field name
2.Go to T.Code: OMSR and enter that field name and get Selection Group
3.1. Use t.Code: OMS2 and click your material type and in next screen check Field reference ( you have assigned for material type){{ ( example :;For ROH material type the Field reference is ROH)
3.2. use T.code:OMS9,, Double Click your Field Reference and select field selection Group & select round box of mandatory and save
Regards,
Biju K

Costing Issue-Previous Price changes in Accounting 1 tab in Material Master

Hi SAP Experts,
Our Client has an issue with "previous price" field under the "Accounting 1" tab in Mateial master .The issue is that client never did costing to this material XXXXXXwith plant XXXX. But system is showing value in the "previous price" field. We have checked whether previious cost estimate exists. There was no previous cost estimate and still the system updated "previous price" field.
Can anyone let me know in which cases the system updates "Previous Price" field in Material Master ?
Your help is highly appreciated.
Kind Regards,
K.S.K

Hi
May be this material was created with reference to the same material in other plant or with ref to some other material or may be costing run was deleted from CKR1
br, Ajay M

Query Related to Addition Of Customer Specific Tab in Material Master

Hi Experts,
we had a requirement from our client to add certain specific fields in Material Master. we added all those fields in a "User Tab" created by copying "Basic Data Tab" & it's attributes in SPRO. After this was done the transaction was running fine but when we want to migrate to another tab say "Basic Data Tab" we are not able to do so as we are still on the same User Tab.
Please help me on this <removed by moderator>.
<removed by moderator>
Thanks & Regards
Priyesh Shah
Edited by: Thomas Zloch on Jun 29, 2011 11:06 PM - urgency reduced, please do not offer ...

Thanks for your reply.
I would like to know am using strategy 52 for this FG, so that i can have option to procure order specific components after sales order arrival, and components which are not specific to the order can be procured before sales order arrival. Where am confused is if am planning with FG1 i.e. am entering PIR for FG1 and am procuring order independent components before sales order arrival and suppose if the sales order arrives for FG2 for which components i have procured before sales order arrival is same but the remaining components which are order specific are different from that of FG1, then how the MRP shall behave. How the requirement for the FG2 shall be met. Kindly throw some light on this scenario.
Expecting a positive and prompt response.
Regards,
J K Tharwani

How to transport number range group Configuration in Material Master

Hi,
I have this query regarding how to transport number range group in material master from one server to another.
Problem: There was no number range assignment done for a particular material type. So, i assigned the particular mat. type to a group which had some number range intervals with the help of T-Code MMNR.
But when i want to transport this config. to other sever, it is only transporting the interval but not the assignment done to that group. In the menu bar only Interval transport option is there.
Can anybody help me with this I hope the query is clear.
Regards
Vivek

Hi,
Number range objects can be transported using Workbench requests.
Thanks
Kishore

Critical Part in Purchasing Tab of Material Master

Hi SAPGURUs,
There is Field in the Material Master of the Purchasing Tab called Crtical Part in the bottom , Can u anyone explain what it is used for ?/and what are the adverse effects it has when we check the critical part field??
Regards
Balaji

hi,
Critical part indicator denotes for a material which is important.
Eg:In a Diamond tool,Diamond is critical part.
regards
venkadesh

Unable to view the MRP1 tab in Material master MM02

Hi all
In Material master some of one of the material i am able to view the MRP1 and MRP2 at the same time some of the other material I am unable to view the MRP1. Please help me to find out the root cause of the problem.
I want to view the MRP1 for other material.
Note: Purchasing group, Valuation class, Material Group are same for all the material.
Regards
K.Gunasekar

HI,
Whenever you create a material master record, you assign it to a material type. MRP1, MRP2 These attributes you will define of each material.
The material type for which you want to define MRP, Run Tcode OMS2, Select the appropriate material type from Dialog Structure and click on details Icon, In the User Departments Field select MRP and Save.
Next Time when you will create material using that Material type it will come automatically.

Logistic handling group tab of material master

Similar Messages

Maybe you are looking for