Logistic period problem

HI Gurus,
While customizing in my actual project the table MARV, that keeps the logistic period data, has been set to a  change request.
I have two client one for the customizing and the other to make the test.
In the customizing client in table MARV i have as current period MAY.
Then using transation SCC1 i make the transport on the other client,  i open  June period in the development test system.
but whenever I make the scc1  to transport the request  from one client  to another, in MARV table the logistic period is reset to '5'.
it is a veryy strange things,
I can easily solve the problem by opening period  6 on the test  client,but still I wouldn't expect this to happen.
Please can anyone help me?
thanks in advance
Antonella
Edited by: antonella ricco galluzzo on Jun 25, 2010 5:18 PM

Hi,
Follow these steps for the qm inspn procurement.
1.Create Material Master Record with QM View.
2.Activate QM Proc/ Specify Control Key 0001.
3. choose Inspn set up and inspn type to be entered as 01 and set the active indicator.
4. Create Q-info record with material / vendor.(qi01)
5. Enter the release by date as 31.12.9999
7.Create inspn plan(qp01) with usage 5 and status 4and enter the control key as PPQM.
8.Choose the operation and assign the inspn characteristic / sampling procedure
9.MD61/MD02/MD04
10 Convert the Purchase requisition as Purchase Order.
11. Receive the Material against the PO.
12. In MIGO against PO receive the material.
13.QM lot will be created
14.qa02 check inspn plan / sample.
15.qe51n results recording
    lot origin 01 mat no and execute results
16.qa11 ud code select accept and chooseinspn tab page and type the qty to be proposed and save.
17.stock will move to unrestricted use .
Regards,
nandha

Similar Messages

  • Condition Period Problem in Sales order -  Need help

    Hi Gurus
    I am testing Sales Order back dated
    Condition period Problem in Sales order
    example for you to understand
    Sales Order where PO date is 17.12.2007
    Del Date & Price date is 13.02.2008
    Then it is not calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
    But if i do it after 14 feb 2008 then it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
    When I do it with current date it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621] say date is 9-5-2008
    I am not able to trace out problem, kindly help me from where I do I check and why this is happening.
    Rajesh Chalke

    Hi,
    I am not sure if this solves your problem, but I am suspecting that this might be due to the 'valid on date' of the condition records created for the relevant duty condition types.
    Since it was a recent regulation and VK11 usually defaults current date as the valid date, that condition record may have been valid only from the recent date on which it was created.
    Check the date in VK12 (To find the exact selection parameters, check the pricing analysis in the sales order which will display the exact condition record which is being selected as of current date.) Check for the same parameters; change the date to relevant date in the past and recreate the sales order. Hopefully this should solve the issue.
    Cheers,
    KC

  • Proration of Basic salay which change in the mid of the period problem?

    Dear all
    This my first proration , i have an employee that take 1500 US and in the middle of the month i decide to increase him to 2000 US.
    I make the following steps:
    1. I introduced and employee on 1 jan 2011 and gave him basic salary 1500 US.
    2- I change his basic salary in 15 jan 2011 to 2000 US
    3- I create simple formula to the basic salary :
    Default For EMP_HIRE_DATE is '0001/01/01 00:00:00'(date)
    Default For EMP_Term_DATE is '0001/01/01 00:00:00'(date)
    Default For PAY_PROC_PERIOD_START_DATE  is '0001/01/01 00:00:00'(date)
    Default For PAY_PROC_PERIOD_END_DATE is '0001/01/01 00:00:00'(date)
    Default For Asg_salary is 0
    Default For Days is 0
    Alias PAY_PROC_PERIOD_END_DATE as Period_ED
    Alias PAY_PROC_PERIOD_START_DATE as Period_SD
    Alias EMP_HIRE_DATE  as HD
    Alias EMP_TERM_DATE  as TD
    Inputs are Amount
    If HD >=  Period_SD and HD <=  Period_ED
    Then
        Days =DAYS_BETWEEN(HD,Period_ED)
       Pay_value= (Amount/30)*Days
    else pay_value =Amount
    Return Pay_value 4- I Create an Event Group of Type Proration and Period as Payroll Period.
    5. Include the following events in the above Proration Group.
    a. PAY_ELEMENT_ENTRIES_F - > ELEMENT_ENTRY_ID
    b. PAY_ELEMENT_ENTRIES_F -> EFFECTIVE_START_DATE
    c. PAY_ELEMENT_ENTRIES_F -> EFFECTIVE_END_DATE
    d. PAY_ELEMENT_ENTRY_VALUES_F -> SCREEN_ENTRY_VALUE
    e. PAY_ELEMENT_ENTRY_VALUES_F -> EFFECTIVE_START_DATE
    f. PAY_ELEMENT_ENTRY_VALUES_F -> EFFECTIVE_END_DATE6. Attach the above Event Group to the Element against the column Proration Group and choose the Allocation----Generated
    7- I Create a Formula of Type Payroll Run Proration of this type.
    INPUTS ARE PAY_VALUE,
    PRORATE_START(DATE),
    PRORATE_END(DATE)
    l_period_start(DATE) = PAY_PROC_PERIOD_START_DATE
    l_period_end(DATE) = PAY_PROC_PERIOD_END_DATE
    l_total_days = DAYS_BETWEEN(l_period_end,l_period_start) +1
    l_worked_days = DAYS_BETWEEN(PRORATE_END,PRORATE_START) +1
    PAY_VALUE = PAY_VALUE * l_worked_days / l_total_days
    RETURN PAY_VALUE 8. I Attached the above Formula to the element against the field Proration Formula.
    when i make Quick pay it gives me
    error ORA-06550:Line2 ,Column 18
    PLS-00302:COMPONENT 'GET_TIME_DEF_FOR_ENTRY' MUST BE DECLAREDPlease help me because this is my first proration.
    Regards

    827916 wrote:
    Hi,
    I am facing some problem in Proration..
    even though i have done the set up proration is not happening. I dont know watz the reason..
    I am not getting any errors but salary is calculating based on the latest salary it is not considering changes inbetween..
    how you can find out my trigger is enabled or not?
    Can you please share with me how to enable it..
    >You can enable Dynamic Triggers from 2 Forms:
    First: Other Definitions > Dynamic Triggers
    after this go to
    Other Definitions >Functional Maintenance
    and attach the existed triggers to all off business group
    Regards
    Mohamed Salah

  • Period Problem for MR21

    Dear All,
    i am getting problem for the following in transaction MR21, as there is no stock available for material.
    Posting period 03 2008 is not open
    Message no. F5201
    Diagnosis
    Period 03 of fiscal year 2008 is not open for posting for the variant of posting period .
    regards,
    qsm sap

    Hi,
    First check the Current period in OMSY trx...for your Comp code..
    Then go to MMPV and enter Comp code, Period & Year
    and execute...
    Ex: if the current period in OMSY for your Comp code is 01,2008
    then you need to enter period 02, 2008 in MMPV trx...
    so, that period 01 will be closed & Period 02 will be opened automatically...
    You need to close periods one by one like this..
    until the period you want use...
    Thx
    Raju

  • Adobe Live Cycle 8 grace Period Problem

    I had Adobe Acrobat ver. 5 which I was unable to uninstall due to some corrupt files.
    Then I tried to install Adobe Acrobat Professional ver 8 . It popped up an error message that You already have a version of adobe which is to be removed. Hence I formatted my C: drive and then successfully installed Adobe Professional Ver 8 . It was a trial version for 30 days.
    But when I tried opening Adobe Live Cycle which comes with it, a message popped up saying that Grace Period is over . Please download e-license. My friends who earlier had installed Adobe Professional from the CD are not getting any messages .
    Any Ideas to solve the problem.
    P

    I think you can do this two ways:
    1. Use radio buttons and chnage the appearence to look like checkboxes
    2. Add some Java script to the checkboxes to set the other checkboxes to null (use the rawValue property)

  • Special Period Problem

    Hi gurus,
    I need some light on special period (13+).
    My problem is this :
    In bex, i have made a report which take fiscal/peroid as input variable.
    my problem is this when i enter 012.2004(say)...then does it also give value for 13+ period for keyfigures corresponding to this.
    Thanks in advance
    regards,
    San!

    Hi,
    have a look at this thread:
    Re: Special Periods and Variable Offset
    Hope this helps

  • Adobe Professional Grace Period problem

    I had Adobe Acrobat ver. 5 which I was unable to uninstall due to some corrupt files.
    Then I tried to install Adobe Acrobat Professional ver 8 . It popped up an error message that You already have a version of adobe which is to be removed. Hence I formatted my C: drive and then successfully installed Adobe Professional Ver 8 . It was a trial version for 30 days.
    But when I tried opening Adobe Live Cycle which comes with it, a message popped up saying that Grace Period is over . Please download e-license. My friends who earlier had installed Adobe Professional from the CD are not getting any messages .
    Any Ideas to solve the problem.
    P

    In the print dialog use 'Document and Markups'.

  • WAD date period problem

    hi,
    i create a query and it has a variable typed date period,
    i want to develop a WAD, i set two input field for the begin date and end date,
    my problem is:
    1. i want a button beside the input field, when clicked, a calendar input help pop up, how to do?
    2. when i enter the begin date and end date, how to fill the date period variable with the input entry?
    pls help

    Have you tried dropdown web item that can display all the dates and user can choose relevant ones
    Use the web item input field for input help with interval option in the properties

  • Posting period problem

    Hi all,
    Can anyone let me know how to resolve the foolowing error,
    Currently the posting month in MMPV was 4, by mistake it has been changed to 7 i.e from july it has been changed to october.
    Now it is not possible to make deliveries & billing so let me know what is the solution for this.
    Thanks in advance

    Dear Friend,
    You have closed the Period 4 (july) by mistake & opened Period 7. Due to this you cannot do any goods movement in July month.
    You now need to open the closed period. Please follow this:
    T-Code: MMPI -> from toll bar select - System - User Profile - Own Data.
    Go to Parameter Tab Page. Here enter "MMPI_READ_NOTE" in the Parameter Id field.
    Then remove assignment of Plants from Company Code in IMG -> Enterprise Structure -> Assignment -> Logistics - General -> Assign Plant to Company code.
    Go to T-Code OMSY & set your required period (i.e. Current Period as 4 & Pervious as 3)
    Reassign the Plants to Company Code.
    Then check in MMPV your current Period would be 4 2008.
    Hope this above is useful...
    Reward if you feel like...
    Thanks,
    Jignesh Mehta
    Mumbai
    98700 10230

  • Posting period problem in BAPI_ACC_DOCUMENT_POST

    I am using BAPI_ACC_DOCUMENT_POST to post documents for AR.It works fine in all the scenarios except when 2 posting periods are open.The previous posting period is open till 1st week of next month.I want to post in the 1st week for the previous posting period.I get the error
    period 05 is not allowed.Is there any value i need to pass
    to the function module.Please help.The normal fb01 does post to the previous period.

    Hi,
    BAPI will return if period is not open like this.
    'perios 04 2006 is not open for posting'.
    but your error message is period 05 is not allowed. please check the date that you are passing and check the year that you are passing to it.
    If not get period and year using the FM 'FI_PERIOD_DETERMINE' and pass this year and period to it.
    Thanks.

  • Posting period problem (very urgent)

    Hi all,
    I want to open a last posting period for particular user which i have handled through authorization group but at the same time i want to open a some G/L codes for other users.Please confirm is it possible to do both the things at the same time.
    Thanks in advance.
    Regards,
    Manisha

    Hello Madhu
    I have tried to restrict certain G/L account group through Authorization group in OB52 but the system do not allow to post the document even in that G/L account group range and prompts the message that "posting period is closed". Actually it is clearly written in the help that authorization group can only work with '' in Account Type field. However, '' means all G/L account group not the restricted / specified range.
    Now how can I restrict certain users to post within certain G/L account group range in the previous posting period?? I hope you have understood my question.
    Urgent response is required.
    Thanks in advance.
    Regards,
    Shabbir

  • SAP 2007 posting period problem

    Hi , Ask for help please.
    I am trying to add the invoice into system for the customers who have 60 days terms, which leads the due date falls into 2010, however the system pops out error says: invoice is not allowed cause not permission date. Just wonder why, and how can I fix it? The posting period has been set up correctly and have year 2010 . thanks

    Hi ,
    I think you need to extend the due date upto 2010 , since you are in 2009 . Then you should be able to create your document .
    Go to current posting period and extend the due date .
    Hope this helps
    Bishal

  • Accounting period problem for doing PGI

    Hi Friends
    I am getting this error while doing PGI , I have entered Actual goods issue date in delivery header  manually . 15 .11.2008 . I am trying to do PGI on 7.12.2008 .
    u201C@5C\QError@     E     F5     286     900001     Period 008/2008 is not open for account type S and G/L 500010     @35\QLong text exists@     200.F     WHL ASSY ALUM 16 X 7     30,000     EA     0000000685u201D
    I guess it is because of accounting period closing for November 2008 .
    Just I want to know ,for doing PGI also ,  does  accounting period maters ?
    If it maters , I request you to mention solution please .
    With regards
    Jayapala S.H

    Hi jaypala
    Firstly go to MMPV and check the closing period of your company code if it is in past close the month by MMRV and then do delivery and PGI and check still if it is not working then Go to OB52 and maintain for account type S with the G/L account 500010 and the closing month and the year.
    Regards
    Srinath

  • MM closing period problem when material ledger is activated

    Hi!
    the MM period is opened for period 7,2010, now we want to close that period and open period 10,2010 ( this is sand box system only, so no one used from last 3 months), but when I am executing MMP to close period 8 ( as we have to close periods till 10th period) , system is giving erros saying key duplicate records are not allowed in table "ckmlkev" ( as material ledger is activated), in this table already periods are existed till 9,2010 for all valuation areas.
    Now how to close 7th period in MM ( MMPV)?
    can any one suggest alternative ways?
    regs,
    ramesh b

    Hi,
    As it's your sand box and you don't need to fix the root cause of the error, try to execute MMPV with option "Close period only".
    Regards,
    Szymon

  • Depreciation Posting Period Problem

    Dear Expert
    I am new in asset management module. Please Help
    This is The configuration. Date Of Legacy data transfer is 31.12.2010 and period in which depreciation was posted for year are blank and for period are zero.
    I Make one aset legacy data, capitalized 01.01.1995 and useful life 15 year. Acquistion is 1000 and accumulated depreciation is 900. After i finish create legacy data. in Aset explorer tab posted value automatically planned depreciation is in period 8 not in period 1.
    I already check to t-code SCMO. No Depreciation run for this company.
    Did i do some mistake in configuration.
    Thanks

    Hi,
    In OAYC, If you are following FY Jan to Dec then maintain, FY - 2010 and Period - 12.
    Regards,
    Sayujya

Maybe you are looking for