Logistics Execution Business Content

Hi
Can anyone tell me whether there is Business content for LE. I can see it on the BW side but when I look in RSA5 in R3 I cant find it anywhere?
Thanks
Karen

euh... it's spread out over the various R/3 modules... e.g. Customer Service related business content can be retrieved under node 0CS, where Sales & Distribution bct can be found under SD

Similar Messages

Errors while transporting the Business Content

hi all,
we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
it says Method Execution - Action Cancelled.
am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
   Start of the after-import method for object type R3TR IOBJ (Activation Mode)
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available
   Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
   Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available
   Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Ended with return code: ===> 12 <===
please revert bact at the earliest....
Thanks
Manicks

hi Manicks,
check if oss note 903291 helps
Transporting DataSources
Transport problem ...Urgent
Transport Issue
Number range object missing NRIV and cant activate IOBJ during import
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
or run program RSDG_OBJNUMG_CREATE_INTERVAL
have a try oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07

Finding data in a datasource/ Business Content Query

Hello,
can you help me with this one -- background to this problem is shown below:
Question:
1.
No data was found in my infocube so I went o R3 to see if the datasource had any data in it by running rsa3 but found no datasource 2LIS_02_S012, although rsa5 shows that it exists. What could be happening?
2.
Also, how do I see the queries which come with the InfoCube? When I go into BEx, I see the dimensions to create my own queries, but where are the ones which comes with the Business content for me to use?
Background to Questions----
I was experimenting with an MM InfoCube 0PUR_C01, and my research indicated that the datasource which supplies this this infocube with data is 2LIS_02_S012. The notes on this datasource indicates it could be extracted as a standard extraction or LO. I did standard, rsa5, rsa6, etc...replicated in BW, etc.
I later created and InfoCube zpur_c01 and copied from 0pur_co1, etc. ...then later created and infopackage and loaded data into the InfoCube for the purposes of reporting.

Hi Caud,
To answer your first question.
- The datasource 2lis_02_s012 that you have seen in rsa5 is in the delivered version you need to transfer this into the active version. Select the datasource in rsa5 and click the transfer datasource button. After you have done this you will see the datasource in rsa6.
Also since this datasource is a Logistics Info Structure the LIS reporting should have been activated and in use.
For your second question
- If you have already identified a standard business content query that you want to use through the metadata repository, you can activate the report through the business content tab in rsa1.
Hope this helps.
Regards,
Demetrius

Logistics execution

hi,
sap gurus,
Transportation Mangement:
(1). Frieght Charges Happens Frequently Basing On The Seasons/distance/cargo weight/volume etc...
How Do You Handle That?
(2). Can You Block A Particular driverVendor In Transportation Module?
(3). How Can We Define Delivery Priority To Deliver The Material For A Paticular Customer?
(4). How Can We Know That Material Delivered By Us Is Achieved The Despatch Target Or Not.
(5). List Of Black Listed Truck Should Be Blocked By The System Automaticlly.
(6). Frieght - Should Compare By Which Mode I.E. Optimisation
(7). List Of Pending Orders Given To Frieght Forwarding Agent To Deliver The Goods And Services.
(8). As Well As List Of Pending Sales Orders From The Systempoint Of View.
my id is [email protected]
regards,
balaji.t
09990019711.

Hello Andy,
If you get any info gathered on Logistics execution plz share with me also
it will be more help full. I am a procuremnt process guy but Now on words I am working on Logistics execution
so plz help me in configuration and business process involved. It would be more help full.
thanks in Advance.
Vijay

Business content Vs LO cockpit

hi all
Please dymistify the differences between BC and LO, When we use LO extraction ?

Hi,
Actually there's no difference. BC is business content, which is delivered by standard content by SAP. LO datasources are part of the BC. LO is logistics extractors and there is a certain method by which you have to set up the extraction for them.
If you want to think of differences, BC datasources start with 0 and LO with 2LIS...
Look at the weblogs below for complete details on LO.
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
Cheers,
Kedar

BUSINESS CONTENT AND LO EXTRACTION

Hi ,
Please tell me
1) what is the main difference between BI content and LO extraction.
2) What happens when we install business content and what happens when we do LO extraction.why are we doing this extraction.?
3) Which process must be done first.
and LO is for logistics extraction i.e. SD,MM etc.(please correct if i am wrong)
4) what about extraction with respect to finance is there anything like LO extraction for finance also?
please explain in simple english.
regards
lap.

well,
I think you don't have to care too much about what did the R/3 consultant; of course what they have configured will be reflected in BW. The configuration impacts on how the data is populated and if your business objects are populated in R/3. It may or may not fit with the business requirement and sometimes it gets complicated to represent the data in BW.
But that's why we have the business content.
So you activate BC objects you need to report on in BW. LO datasources and extractors will be part of this activation. Then you connect both systems and extract this data. You'll have to check with your business req if your extraction reflects the R3 data as wanted by definition.
I a fresh server, you will then just customize and implement all the workbench necessary (IObjs, Cubes, ODS, transformations....). if your system is empty then you won't data to check! But you'll move your developpment to a BW QA or PROD sys which will be connected to a client in R3 having data (otherwise your SD consultants wouldn't be able to test either...)
Replication: when a DataSource has been changed in the source system (R3), the BW receiving structure has to be adjusted. this is done via the replication procedure.
The source system keeps a timestamp of when the DataSource has been reactivated the last time. BW has also this timestamp in its DataSource. When you change your DS in R3, the timestamp will be updated. If you request now data in BW from this DS, the system will complain because both DS (in BW and in R3) have different timestamps. That's why you have to replicate prior loading.
The replication may inactivate follow up objects like extract structure, transfer structure and TRules.
hope that helps...
Olivier.

Error while activating the business content object

Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
Thanks

Thanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks

Unable to 'set the default source system' to Install Business Content

Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.

Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to <i>choose the dafault source system</i>
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P

How to activate the Info object catalog in Business content

Hi,
While trying to activate the Info object catalog, I found that some of the info objects under this catalog was earlier activated by some other developer. I brought this catalog (0SALES_CHA01) over to the Business content activation panel ( with only 'necessary object settings ) and all the info objects that also came along were de-selected since I didn't want to install those again). When I tried to install these I get an error indicating that some of the info object in question are not already active.. and ultimately the catalog doesnt get activated , although more than half of its infoobjects are already active under the '0CHANOTASSIGNED' node.
Please let me know whether I can get only the Catalog activated without getting any existing activated info object merged or installing those which are not already activated.
Thanks
Arunava

Hello Arunava,
Just drag the infoobject catalog as u did earlier to the left in the bus cont installation screen with "only necessary object" option.
Dont try to deselect any object. Go ahead with the default options and install in background.
Now you can check for the available objects in the catalog. if you have some objects missing, and available in unassigned node,double click on the newly installed infoobject catalog, select the required objects (which are not yet assigned to this) from the left side and bring them to the right side.
this will make the unassigned objects assigned to the required catalog.
Hope it helps..
(please dont forget to reward points to helpful answers)

Business content datasource enhancement

Hi Experts,
I am new to HR.
We are implementing HR modules Personnel development and Personnel administration, while I was looking into business content extractors 0HR_PA_0 and OHR_PA_1, I found that there were only few fields in the extract structure but there were many fields in the cube.Do we need to enhance the datasources? how it works?. If anybody did the enhancement to these datasources, please give me the information with examples.
Anita

No, it is no necesary to enhance standard data sources. Those datasources extract, basically employee and date. Most infoobjects in cube are calculated from 0PERSON and 0EMPLOYEE attributes, having in count the date and employed extracted, because most in HR is time dependent.
Assign point is usefull

Taking too much time incollecting in business content activation

Hi all,
I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
What can be the reason for it.
Please help..

Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des.

SRM Business Content

Hi All,
I would like to know the infosource of 0SR_C01 procurement overview(aggregated) cube. while on help.sap it shows 0SR_MC01 as a multiprovider for 0SR_C01. But could not find the infosource for the same.
I would also like to know if anyone has the list of content infocubes and their infosources for SRM. Please share it with me.
Thank in Advance
Niren

Hi ,
for all business content, you can start here
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
scm
http://help.sap.com/saphelp_nw04s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
and bi best practice
http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
Check this link for SRM Business Content information: http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
DataSources
New DataSources have been created for NW 2004s BI Content Add-On 2 and SRM 5.0. These are described here, along with their extraction logic.
The following graphic shows the data flow from the DataSources to the DataStore objects
Structure
Each DataSource has an extraction structure and a data extractor. Generally, this is an RFC-capable function module.
There are two types of extraction: Specific extraction and generic extraction:
Specific extraction is strongly oriented towards the data model of the BI System and the necessary extract structure. It executes DataSource-specific processing steps.
The logic contained within the generic extraction is implemented centrally and can therefore be reused by the specific extraction modules. The generic extraction deals with access to the SRM database and is similar for each DataSource.
Generic and specific extraction
Extraction logic in detail
Data extraction involves the following six function modules:
InitLoad
InitLoad is called as soon as an initial upload is started in the BI System. In other words, it is executed when data is loaded into the BI System for the first time. The module can restrict the data extraction according to filter criteria that were defined in BI during extraction (for example, extract the data for a particular timeframe). InitLoad packages the data before it is transferred to the BI System.
DeltaLoad
DeltaLoad is called when a document is modified in the SRM System. The module writes data that has accumulated since the initial loading to a delta queue.
Data Collector
The Collector reads the required data from the database in the source system. For performance reasons, the data is then buffered in system-internal tables. The tables have the same structure as in the database. This saves time and effort, because data conversion is kept to a minimum.
Data Consolidator
The Consolidator groups data that belongs together from a business point of view. The consolidated data is stored in internal tables and is prepared for further processing.
Data Normalizer
The Denormalizer prepares the source data for the BI System. It calculates key figures that are required for the report but are not contained on the database and converts data types in the source system to data types of the BI System. Depending on the BI data model, the system now decides how each row is filled with data.
Data Mapper
During mapping of the data, the system defines which fields of the denormalized data structure are assigned to the fields of the extract structure. In this way, flat and one-dimensional lines are generated from the data.
The following table shows the technical names of the function modules of the individual DataSources:
Description
0SRM_TD_PO
0SRM_TD_CF
0SRM_TD_IV
0SRM_TD_PO_ACC
InitLoad
BBP_BI_PO_EXTRACT
BBP_BI_CF_EXTRACT
BBP_BI_IV_EXTRACT
BBP_BI_PO_ACC_EXTRACT
Collector
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
Consolidator
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
Denormalizer
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
Mapper
BBP_BI_PO_MAP
BBP_BI_CF_MAP
BBP_BI_IV_MAP
BBP_BI_PO_ACC_MAP
DeltaLoad
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
Hope this helps,
Regards
CSM Reddy

Finding fields in R/3 for data extraction VS Business content

Hi all,
I am doing my first BW project after my training and I am finding it difficult to locate some fields that should be part of my report.
The Consultant says Sales Group, Inco terms, Open orders, Account assignment group, Sold to party, ship to party, Payment terms, Document currency and base currency, Complete deliver indicator, Order type and Count of Complete deliveries required should all be in the Order while transmission type and number of transmissions should be in NAST.
I have gone to R/3 - RSA6 to look at datasources and found 2LIS_01_S260 (Sales order) to have most of the fields but not payment terms, complete delivery indicator, open orders base currency and count of complete deliveries required. Also in Sales document header data, these fileds are not there.
Is it a case of not understanding the correct name of the fields if they are described in a different manner in R/3 or I have not done the proper thing? Can I just use an infocube in BW business content to get all the required objetcs -(infocube, infosource, datasource).
Thank you

Hi,
Finding the correct Infoobject and it's mapped field is a job of BIW consultant. But the problem is how to find them and how to frind respective R/3 field and it's table. You will be familar with them as your experience increases.
So you need to list of fields you require and then find out the Datasource/s which can give these fields by going through the Business content help or using LBWE Tcode in R/3.
The datasource you mentioned is obsolate one. i.e 2LIS_01_S260 .
You better to go wtih new DSes like 2LIS_11_VAITM,2LIS_11_V_ITM.
http://help.sap.com/saphelp_bw31/helpdata/en/8f/36f338472b420de10000000a114084/frameset.htm
If allmost all fields are avialable in a DS , then you can check the possibility of enhancing the DS for remaining Fields.
With rgds,
Anil Kumar Sharma .P

Business Content for Bill Up transaction in CRM system

To all Experts,
I'm currently working on a project that requires Bill Up transactional data ( Source Table: CMSD_BU ) to flow from CRM to BW system. I'm looking for Business Content that can fulfill this requirement. However, till to date, I couldn't find any information of such Business Content. I'm not sure if such BC exist. Can anyone help if you have experience implement this data flow?
When searching for the DataSource / Extractor, I found BW Extract Structure CMST_BU_BW and CMST_BU_BW_C in the CRM system. But couldn't find any DataSource for both extract structure. Not sure if we need to install any support pack in order make the BC available in the system. Please help if you have any idea.
Thanks in advance.
Regards,
Hui Pin

Hi Shalini,
The document is replicated from ECC to CRM without any errors.
For this document I just want to create follow up transaction in CRM.(I dont want to change the document in CRM)
The follow up transaction is in display mode. this is my problem.
Hi Rekha:
I have done following setting in CRM to create follow up transaction in CRM for the document which is replicated from ECC to CRM.
1)     Defined the Copying Control for Transaction type
2)     Defined Copying Control for Item categories
3)     Defined Item category determination when copying
Thanks in advance,
Regards,
-Rahul.

How to open document from business content in weby dynpro ?

Hello experts,
I've cretaed a webdynpro where I want to display a document which is attached
to a product in tx commpr01 in business content.
I've tested method o_cl_crm_documents->get_with_url , but
there I do not get a url in webdynpro.
Does anybody know another method/fm to display such a document from
business content in webdynpro ?
Thanks and best regards
Gerd

Hello Mr. Jung,
I'm sorry but I didn't find this method linktourl.
In my web-dynpro I'm getting the url for my document after
cklicking on the selected row.
Then I just want to give this paramter to this linktourl method
and open the document.
How can I implement this method ? which class ?
Thanks Gerd

Logistics Execution Business Content

Similar Messages

Maybe you are looking for