Logistics extraction for QM - qRFC problem

Hi,
I have problem with LO extraction for QM - with delta.
There are several records in 2 ques (MCEX05 and MCEX05_1), but the job for moving them into BW delta always ends with errors (Message_type_x).
I'm thinking about deleting this que and start reconstruction for application 05 again.
Would this help?
The structure of one DS (2lis_05_qe2) has been changed with append structure, maybe this could also be a problem.
There is also one doubt:
does deleting qRFC (transaction LBWQ) affect any other area then just BI extractors for particular application? I'm affraid to harm some ERP processes?
Thank you,
Tom

Hi
If I got your question properly, If you are trying to change the Data Source (LO) then it would be locked for the users to report on the same.
Appending / enhancing will break the Delta Runs also some times. Thats the reason whenever we are planning for the Strcture change we will run the Delta and make sure that the Queue has no runs.
But deleting LBWQ would not effect on ERP Process as it picks up only New/changed Delta Records.
Hope it helps and clear

Similar Messages

  • Logistics extractions

    Hi Experts,
    We have to extract Logistics data from ECC to BI (7.0) system. Here I am looking the sequence for pulling Logistics extraction (Like first Sales order then Delivery then Billing)..
    I would like to get over all view about Logistics extraction for any BW project.
    Regards,
    Learner

    Hi
    This topic has been discussed several times in SDN.  Search the forum example: LO extraction
    R3 settings are still same in ECC 5 and ECC 6 for LO.
    Thanks

  • Help requires_A Safety Belt for Logistics Extraction Queues

    Hi All,
    I have read the Blog "A Safety Belt for Logistics Extraction Queues" and it is very useful for taking the backup data from Extraction Queue.
    I have a set of Queues related to this BLOG.
    1. Suppose, i have created the Backup table for the Particular Application (Ex 03).And i am scheduling the Job from the JOb Control of LBWE.Will it pull the data from Backup table or with the Standard Table. How can i pull data based on our needs.
    Pls suggest on this.
    Thanks,
    Jelina.

    Dear All,
    Anybody has tried performing the Backup of LBWQ data in ECC. How to pull data from backup table to RSA7.
    Pls suggest.
    Thanks,
    Jelina.

  • Delta Extraction for 0FI_GL_6

    Hi,
    We are facing a problem in the delta extraction for the data source <b>0FI_GL_6</b>.  0 Records are populated into BW whereas in the Extract checker (RSA3) of the source system shows 1000 records. Moreover the delta queue (RSA7) has an entry for 0FI_GL_6 but no data is displayed inside it.
    Kindly advice.
    Reagards,
    Vidhya

    Hi,
    This extractor works based on time stamps so wait for a day to get the data.
    have a look of the thread :
    Re: delta not working for 0FI_GL_6 & 0EC_PCA_1
    Regards
    Happy Tony

  • Resources for tRFC/qRFC

    Hello friends.
    Since few days we are observing frequent problem with Resources for tRFC/qRFC. 1/2 application server gets loaded with RFC call to APO system and from this application server RFC connection to APO does not work.
    I have checked communication channels : using transaction SM51  ®  Go to  ®  Server information  ®  Communication table. Here i can see lots of connection to APO system with state 0 (Not ALLOCATED/DEALLOCATED ).
    We have created a RZ12 Logon group with application server but not sure if it is being used correctly.(I think this because, in SMQS > qRFC Resources i can see on 1 application server no free DIA WPs for tRFC/qRFC but on another, there are many free)
    Also, i see only on loaded application server, work process goes in Stopped status with CPIC reason. RFC test only from this application server do not work in between.(RFC configuration is fine, it works from other app servers and it is configured with MS server settings for APO)
    Can you please suggest what should be checked now.
    thanks
    ashish
    Edited by: ashish vikas on Feb 11, 2011 11:23 PM

    Hello Ashish
    Do you have parameters in place correctly, see following help.sap.com page:
    http://help.sap.com/saphelp_nw70/helpdata/en/f7/76124926929146a722b8bc4408dec1/content.htm
    Have you checked that you are on the correct version for qRFC?
    Kind regards
    Tom

  • 2 extract for 1 replicat

    Hi all
    i have one problem, i will create 2 database instance then configure goldengate each database instance.
    sourceschema t1.rep_table01 DB1 (extract process) --|
                                                                                   |---->  destination schema dest.rep_table01 DB03 (replicat process)
    sourceschema t1.rep_table01 DB2 (extract process) --|
    this topology possible on Oracle GoldenGate 11

    I'm guessing your question is not really 2 Extracts for 1 Replicat, it's that you have two source tables feeding 1 target table, which is totally possible with GoldenGate as long as the table on DB1 is segmenting the key values from DB2's key values, so that you don't have conflicts on DB3.
    And as Antony points out, you would use 1 Replicat for each Extract, and those two Replicats would be applying data to the 1 DB3 table, asynchronously.  So again you'd have to ensure uniqueness between DB1 and DB2 data.
    And if you are asking about 1 Replicat for 2 Extracts, you can't do that, nor can 2 Extracts write to the same trail, so you'll have to do 1 Extract and 1 Replicat per DB.

  • Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

    Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
    == URL of affected sites ==
    http://www.hotmail.com

    We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

  • Firefox crashing when i wanna open or close a tab or a window, also while wanna open any page, now what to do for solving the problem?

    Firefox crashing when i wanna open or close a tab or a window, also while wanna open any page, now what to do for solving the problem?

    Disable McAfee siteadvisor and check the problem still persist or not?

  • I updated the software on my 2009 MBP to Mountain Lion. Since then, my iPhoto has been unable to open my photo library. I have updated iPhoto, and still no luck. Any ideas for fixing this problem?

    I updated the software on my 2009 MBP to Mountain Lion. Since then, my iPhoto has been unable to open my photo library. I have updated iPhoto, and still no luck. Any ideas for fixing this problem?

    Welcome to the Apple Support Communities
    Do you see any message when you open iPhoto? Try to open iPhoto holding Option key and select the library

  • A solution for iTunes install problems

    I upgraded to the latest ver of iTunes and immediately had ALL the problems posted all over the 'net.
    The following is what worked for me.
    BACKUP!!! Set a Restore Point. Back up your REGISTRY. It is critical that you back it up beforehand and use caution while cleaning it. Please do this in case everything goes T. U.
    Remove all references to iTunes, iPod and Quick Time. There are literally thousands and you must get rid of all of them.
    Find, download, install a copy of jv16 Power Tools.
    Then:
    1. BACKUP! Set Restore Point! Back up your Registry! Did I mention backing up?
    1a. Be very careful cleaning out the Registry. Take your time. Go slowly. Make sure that what you delete is only iTunes-related. Check twice before deleting. Take. Your. Time.
    1b. The Registry is your PCs mind; do not scramble it. You will be sad.
    2. Using jv16s Software Manager, uninstall iTunes, iPod and Quick Time.
    3. Using jv16s Registry Finder, one at a time, search for and delete ALL references to iPod, iTunes, Quick Time and Apple Computer (BE CAREFUL; it will give you references to various 'applets" and "appletalk"; do NOT delete those. Only Apple Computer stuff.)
    4. Using Microsofts Search function, search for all remaining references to iTunes, iPod, Apple Computer (leave applets alone) and most importantly-Quick Time.
    5. When you are certain that everything that says Apple Computer, Apple, iPod, iTunes and Quick Time exists no more on your PC, Reboot.
    6. Go to www.old-software.com and download an old copy of iTunes. The one that finally worked for me was iTunes v 6.0.5
    7. Install an old version of iTunes. DO NOT USE THE LATEST VERSION OF iTUNES! Thats what caused the problems in the first place.
    8. Reboot.
    Even though you previously "uninstalled" iTunes, probably using the Add Remove Programs application in Control Panel, there remains behind thousands of pieces, parts and references to iTunes and Quick Time, in the Registry, TEMP files, Documents and Settings (Application Data and Local Settings), in Windows/system32 and a hundred other places. You gotta get rid of it all.
    Quick Time seems to be the main culprit, but in the end I had to get rid of all traces of all of the Apple applications before I could install again and get it to work.
    It took me 3 days to figure out this procedure but once I did, it took only an hour to do it.
    I've seen a couple other procedures recently posted here that look good. If you are uncomfortable with going into the Registry, try one of those others first.
    And fer cryin' out loud, Apple. Yank the latest version of iTunes off your site. I did a Google search for "iTunes installation problems" and came up with 700,000 hits. Do ya think you might have a problem?
      Windows XP   Try testing your upgrades before releasing them!

    Im trying your method right now, when im finished ill let you know how it worked out. I agree with your comment on apple needing to pull the latest version and get a version that actually works.

  • Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Yes.
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
    When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.
    If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
    Otherwise, you may need to do one of the following steps.
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
    If you continue to have problems with your disk, it may be physically damaged and need to be replaced

  • When will there be a fix for the permissions problem in iTunes 11.1.1? I get a list of three or four-hundred when I run the repair program.

    Does anyone know when will there be a fix for the permissions problem in iTunes 11.1.1? I have a list of three to four hundred repairs everytime I use the repair program. ~Mike.

    SinkeMH wrote:
    Does anyone know when will there be a fix for the permissions problem in iTunes 11.1.1
    Likely someone does but Apple has not stated if/wehn.
    I have a list of three to four hundred repairs everytime I use the repair program. ~Mike.
    Then don't use the repair program unless you are actually having an issue.

  • Buy my problem of camels Store Lee games possible solution for me my problem?

    Buy my problem of camels Store Lee games possible solution for me my problem?

    This worked for me, sort of. A while back when I downloaded that windows update that installed the new version of IE, I noticed that IE wouldn't connect to the internet and pages wouldn't load. However, I thought nothing of it because I use Firefox and FF was working just fine.
    I went into IE earlier this evening (it still wasn't working) and tried to follow your recommended steps. I got up to step 4 and IE froze. I tried closing it, reopening it and repeating the steps but it would always freeze at step 4. In another thread, someone was saying that iTunes released a security update and that fixed the store for them so I tried opening Apple Software Update and that froze. I tried it several times, nothing. Would always freeze. I even tried updating thru iTunes and IT would freeze.
    Finally, I went to the control panel and uninstalled IE7. The iTunes store and the Apple Software Update program are now working! So thank you very much for your suggestion. Otherwise, it may have never clicked with me that IE was the problem.
    Windows XP

  • Will I get my iPhone replaced for yellow tinting problem

    Will I get my iPhone 4S replaced for yellow tinting problem, it's hardly 6 months old phone and this problem is from day one. Screen is not whitish it's yellowish.

    If you think there is a problem with the screen, try making a reservation with a Genius.

  • How to find Extract for the bank key/ bank account changed in vendor maste

    Hello Gurus,
    I need help in finding the extract for the bank details of vendors changed for a period of time. I tried using FK04 under multiple selection and ran the report for the selected vendors. It only shows  the "bank details created" or "bank details deleted" under Old Values and New Values but doe not actually shows the values for the field changed.
    Is there a way where i can get a report which shows a log of change in bank details with old and new values,
    Thank you,
    Prakash

    HI,
    Try using report RSSCD100 and give the selection condition
    Object id --> BANK
    and then you can limit the results by specifying the time and date range..

Maybe you are looking for