Logistics Invoince Verification on Stock Transport Order without Goods Rec.

Hi...
Can i do a Logistics invoice verification with a STO reference, without any good receipt in this STO?
Thanks in advance...

If the STO is for business between 2 company codes, then it is the same as for standard purchase orders.
As long you do not have activated the GRbasedIV you can post the invoice immediatly after the PO creation

Similar Messages

Stock Transport Order Without Delivery

I m trying to transfer stock from one plant to another (within same company) without delivery.
what all configuration do i need to do.
pls. guide.
I m little bit confused over stock transfer,
Regards,
Pramod Kumar

Oh no, not at all! This forum is meant to answer all your problems!
Configure Inter company Stock Transport Order
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assigned to the ordering plant ( MM -> Purchasing ->
Purchase Order -> Setup stock transport order -> assign the internal customer to the
ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assign the supply source (Delivering Plant).
Create a purchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assign the purchase order
number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery
document.
Billing (Intercompany pricing conditions should be set).
AND
1. Customer No. for the Goods Receiving Plant - OMGN
2. Availability Check- Checking Rule (if necessary) - OMGN
3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders,
NLCC)
4. PO type (which i believe you have done) - OMGN
5. Assign Vendor No. to the Supplying Plant (done) - VK02
6. Assign Customer No. to the Purchasing Plant for the Inter-Company Invoice (but you
need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),
IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org
***and by the way for the Invoice to work between Cross-Company Plants, you need
also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure
STO:
STO CONFIG:
The following steps have to be followed in order to configure stock transport order
between two plants.
1. Create a vendor for the Company code of the receiving plant using account group 0007
via T-Code XK01.
2. In the purchasing data view assign the supplying plant and the schema group
3. Create customer with the sales area of the vendor.
4. The shipping conditions, the delivering plant and the transportation zone determine the
route in the STO.
5. In the pricing procedure determination relevant to the STO assign document pricing
procedure and customer pricing procedure to get the pricing in the invoice.
6. Maintain condition records for pricing condition.
7. Maintain carrier as a partner in the customer master.
8. In OMGN select the supplying plant and assign the company code and sales area.
Similarly select the receiving plant and assign the company code and sales area (The
company code to which the plant is assigned to).
9. Assign the delivery type and checking rule to the document type.
10. And finally, assign the purchasing document type to the supplying plant and the
receiving plant.
11. Create the STO using T-Code ME 21N and save.
12. Check for release strategy if any and release using T-Code ME 28.
13. Create delivery in background using VL10G.
14. If delivery is created, it is an indication of correct configuration and master data
creation.
Stock transfer between two plants in deffernet company codes is known as inter company
stock transfer.
Material shoud be maintained in both supplying and receiving plant MM01
Sotck should maintain only in supplying plant MB1C
Create receving plant as a customer in suplying plants company code and sales area
XD01
Assign this customer number in receving plant detials OMGN
Assign supplying sales area in supplying plant details OMGN
Assign delivery tupe NB for in combination of supplying/ receving plants.
Create STO ME21N
As it is normal there in the item details wer should get shipping date i.e customer number
Go for Deliveryy VL10B
Shipping point *****
Select PO go for execute
then select the delivery then go for delvy ............create delvy,,,, delvy nubmer generated.
Goods Issue VL02
Delvy doc **********
Click on picking
enter the picking qty
Click on PGI
in the mean time check in the PO history you will get the details
Goods receipt MIGO
Stock overview the stock will be updated....

Invoice verification in Stock transport order between two company codes

Hi
I made 3 good issue in supplying plant of company codeagainst stock transport oder & 3 good receipt in receiving plant of company code.
During invoice verification in MIRO, 3 lines items (Pertaining to 3 GRs) are not displayed But consolidated quantity (Sum of 3 GR qty) & value is displayed.
Please tell me how to get 3 line items (as per GR) during invoice verification.
Thanks
Vinay

Hi,
Tick the GR based IV in the PO.
Regards,
deepak.

Stock Transport Order without Delivery or any customer

Hi
Error: Not possible to determine shipping data for material
I am trying to create an STO (me21n) for plant to plant transfer of stocks within one company code (intra compnay). I do not have any customer or shipping/delivery details. This should be a simple MM thing, without any SD. I selected UB as the Purchase Order type and gave supplying and receiving plant from the same Company Code. Can somebody help me with this error.
Regards,
Smitha

Hi
Based on your explaination - it seems that you are trying to create a STO and dont want to use any SD functionality of Delivery etc
Once you create your STO please try to process Transaction MB1B with movement type 351 and plant and SLoc of the supplying plant and this post your stock in transit means it will disappear from supplying plant bucket and show up in Stock in transit for receiving plant.
The next step will be to post 101 at the receiving plant which will receive the stock in Receiving plant and takes it out of stock in transit.
Please try and let me know
FYI there are 2 steps transfers which is above and there is also one step transfer.
Please let me know.
Deepak

What is Purpose and Usage of "Stock Transport Order" in Purchase Order.

Sap Masters,
 I have Created One PO Order with type UD-Stock Transport Order.
 But I didn't know, How to Process in T_Code VL10B.
 Kindly, Describe What is the Usage of VL10B Transaction ? And How to Proceed
 it ?

Hi,
A number of procedures are available to enable you to transfer materials from one plant to another:
-> Stock Transfer Between Plants in One Step
-> Stock Transfer Between Plants in Two Steps
-> Stock Transport Order Without Delivery
-> Stock Transport Order with Delivery via Shipping
-> Stock Transport Order with Delivery and Billing Document/Invoice
In Purchasing, you can request and monitor a stock transfer with a:
-> Stock transfer order
-> Purchase requisition
-> Scheduling agreement
When a stock transfer involves two company codes and the issuing of a bill, you do not create a stock transport order but a standard purchase order
(see also Cross-Company Stock Transfer).
Where to find information about this?: See SAP-Library
-> MM
-> IM (inventory mgt)
-> managing special stocks
-> stock transfer in purchasing
Best regards
FSA

Stock Transport Order u2013 Duplicate goods receipt quantity

We implemented the scenario: the stock transport order process with SD. To post the goods issue , we have created a new goods movement type (937) with reference to the movement type: 641, to differentiate these movements of other goods movements that are made in the company, because in this case, for issuing plant it is necessary to manually confirm these goods issues in WM (We need use storage bins in issuing plant). The outbound delivery, in issuing plant, is created through the transaction VL10B with reference to Stock transport Order, and goods issues is posted using transaction VL02N. In receiving plant, we use transaction MIGO to post goods receipt.
Then, when we post the goods receipt for one replenishment delivery in Transaction MIGO, the system issues error message: M7022 telling us: u201Cthat the stock in transit has been exceeded by XXXu201D. The difference between the stock in transit and the Quantity in Unit of Entry is exactly equal to the quantity that was reported in the goods issue in Issuing Plant (outbound delivery). That is, Quantity in Unit of Entry is duplicated with respect to outbound delivery quantity. But if the goods receipt is posted with reference to the stock transport order, the Quantity in Unit of Entry is calculated correctly and corresponds with the quantity of outbound delivery of the issuing plant. This does not happen when using the standard goods movement type 641. As mentioned above, we have configured Warehouse Management for issuing plant.
The only difference between the standard scenario and implemented one in the company is the goods movement type, which is a copy of movement type 641. So, my question is: Can not copy the goods Movement type 641 (Transfer to stock in transit)? Please, I appreciate your support to resolve this issues.
Best regards,

All goods movements are being posted in the same unit of measure (base unit of measure ), since the material has no alternative units of measure configured. And we think that has to do with the movement type, because when using the standard movement type (641), the whole process is flowing properly. However, when using the new movement type, the system behaves the way it was explained earlier.
Through various tests, we identified that the quantity is duplicated when the table T321 (Assignment MM Movement Type --> MM-WM Movement Type) and the IMG view V_156S_WM (Reference Movement Types for Warehouse Management) are set, since it also was created a new movement type for WM. For this reason we think that the problem lies in the configuration of the new movement type.
Anyway, thanks for your help.

Stock Transport order - Transport cost on

Hi
What is the best way of accounting for Freight costs on a stock transport order, with and without using Logistics execution and limiting the transactions processed.
For Primary distibution between to plants where the cost are Variable based on km and fixeds based on points.
For intercompany stock transfer,

Hi,
For Logistics execution Enter the freight component in the STO, either based on qty or fixed value, the same can be paid against the invoice verification for the planned delivery cost once the Post Goods Issue / GR is done.
The other option will be a direct FI posting, but the same will not get inventorised if your inventory account is an auto posting account, the same will need to be charged off against some expenditure.
Regards
Merwyn

Stock transport Order

Dear All
Scenario-- Stock transport order Between two company codes.
The valuation of Comapny Codes is at Moving Average Price.
I have a scenario
MAP of Issuing Plant-- Rs. 10 / kg
I am able to pick up the price of Rs.10 (MAP) of issuing plant while creating PO.
in receving plant.
At the time of Goods issu the MAP has changed & become Rs.12/kg. Hence the goods issue takes place at Rs.12/- perkg.
When we make GR at receiving plant ,the valuation of GR is at Rs.10 i.e at PO price.
Is it possible to have a GR valuation at Goods issue price for that delivery note without entering the invoice before Good Receipt?
Request Your feedback urgently.

I mean that it is possible to do the GR valuation at goos issue price if we make Invoice verification prior to GR.
I want to know whether any other solution is avialable?

Intercompany Stock Transport Orders

Hi All,
My current Client's Intercompany Stock Transport order involves 3 Company Codes. The final receiving company code will place STO to the second Company Code, but the Goods will be delivered by the third Company Code.
The tricky part is the Vendor number should be the Goods Delivering Company Code and not the second company code, the second company code is only for accounting purposes.
So what we did, we created VN Vendor, but not assigned the Delivering Plant to this Vendor. Instead we created GS Vendor and assigned the Delivering Plant to this GS vendor and assigned this GS as Partner in Vendor Master.
Now when I try to create STO, only VN vendor's name and address is populating as per Standard SAP Design, and moreover Shipping details are not populating. what we need is GS Vendor's number, name and address should replace VN data in STO Header.
I am quite surprised to know if there is any User Exits available to make this design to work?
I request MM Experts to help me.
Thanks,
Sundar.

Hi Sundar,
I am not fully clear on your requirements.
Let's say you have 3 company codes with different plant codes:
CC A - with plant 1111
CC B - with plant 2222
CC C - with plant 3333
Now, according to what I understand from financial perspective C should do purchasing from B and B should purchase products from CC A.
But what I also got is that from logistics perspective, you would like to make a movement between plants 1111->3333, without going through plant '2222'. Is that what you expect??
If yes, that would be very weird scenario. Because then according to me any financial audit would claim that there was no actual sales/purchases between the companies.
Normally what is done in such case is that both the stock movements as well as financial postings are done between the companies and plants. So that the last PO is against CC B which is represented by Vendor linked to plant 2222.
Of course physically the goods should be transferred between locations 1111 and 3333. And this you can achieve via special delivery note layouts etc.
What I was also involved is automatization of such process. So that after goods issue from plant 1111, there is automatic GR and GI from plant 2222. So that at 3333 there is only manual GR required when goods physically arrive there.
Hope this helps
Regards
Dominik Modrzejewski

Minimum order qty for Stock transport orders

Hello
I wonder if there is any way to make the following fields from the Sales org 1 view in the material master to apply on Stock transport orders (ME21N, with subsequent delivery created in VL10B):
Minimum order qty
Minimum delivery qty
Delivery unit
As of now in our system, it only works for Sales orders and related deliveries. But not for Stock transport orders with a supplying plant.
Also, if there is any other way to implement minimum order qty funcitonality and delivery for Stock transport orders, pls advice.
Thanks,
OT

Hello
We are in an intracompany business case. The supplying and recieving plant are in the same company.
The situation is as follows: we are planning all replenishment manually without any involvement of MRP.
What we would like to achieve is the same functionality as of the minimum order/delivery quantities material master fields in the material master.
So when the planner creates the stock transfer order, he keys in supplying plant, material and quantity manually, then the warning message about the minimum order qty should appear.
So far I have not found any way to do this. Any ideas are greatfully received.
BR,
OT

Inter - Company Stock Transport Order Issue

MM SAP Gurus,
When I try working on "inter company stock transport order between two company codes."
I found the errors while creating PO(using document type UB)
ie.
*1st Error -Material 1 not maintained in Plant 2.
2nd Error - Customer 1 does not exist (please check entry in plant 1)
3rd Error - Not possible to determine shipping data for material1)*
i couldnt find out the error................................
Here is the configuration done by me......
Company codes:c1,c2
Plant for c1:p1
Plant for c2:p2
I m going to create and transfer stock from p2 to p1.
Here i m using stock transport order with billing(SD)
Purchase org for c1:porg1
Vendor for c1,porg1:v1
I assigned plant p2 in additional purchase data of vendor v1.
Sales area for c2:sorg2,ds2,d2
Customer for sales area(sorg1,ds1,d1):cust1
Now i go to mm->purchasing->purchase order->setup for stock transport order
> for receiving plant p1 i assign cust1,sales area(sorg1,ds1,d1)
> delivery type for supplying plant:NLCC
>checking rule RP.
i assigned doc.type UB into receiving plant p1 and supplying plant p2.
Then, in ME21N used doc type UB, these r the errors::::::::::::::::::::::::::::::
*1st Error -Material 1 not maintained in Plant 2.
2nd Error - Customer 1 does not exist (please check entry in plant 1)
3rd Error - Not possible to determine shipping data for material1)*
I already maintained all this.
The doc type NB also I tried ,,,,,,,but same errors r being shown.
Also where to create the inter company a/cs for billing?
Please check the attached file for the error and let me know.
Thanks & Regards
Keerthi ...

Business partner
● Vendor master u2013 supplying plant
Create the vendor for the purchasing organization of the receiving plant.
Assign the vendor to the supplying plant in the vendor master record.
From the menu, choose Logistics ® Materials Management ® Purchasing ® Master Data ® Vendor ® Purchasing ® Change (Current). Go to the Purchasing View and choose Extras ® Additional Purchasing Data.
● Customer master u2013 receiving plant
Create a customer master record for the receiving plant. From this, both the address and the data that is relevant for shipping point determination, such as transportation zone and shipping condition are taken.
From the menu, choose Logistics ® Sales and Distribution ® Master Data ® Business Partner ® Customer ® Create.
The above is from help.SAP:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
Plz check this link for tht information.
So, basing on this: I have customer 1 and vendor 1 for CC1......
--> Customer 1 is assigned to the receiving plant with sales area1 in setup STO configuration.
--> Vendor 1 is assigned to the supplying plant in the vendor master.
--> My question for u is:
1) In ME21N, in the vendor field u assign the vendor from CC1 or CC2 (Because it says the vendor - external supplier if u read in F1 in tht vendor filed)
Company code , Purc Org, plant all this will be from CC1 in ME21N, right?????????
Material exists in both the plants P1 and P2.......right?????
2) How to configure the inter - company accounts for the billing in sd for this STO scenario.???
Please clarify these things.....
You will be appreciated and rewarded too.
Thanks
Keerthi

Intra Company Stock Transport Order

Hi,
This is a scenario of Intra Company Stock Transfer (using Stock Transport Order with document type UB) from one manufacturing plant to another manufacturing plant within the same company code.
I have created STO, prepared Outbound Delivery with T-Code VL10B and did PGI. Billing was done with T-code VF01 and Outbound Excise Invoice was created with T-Code J1IIN
While doing Goods Receipt in the Receiving plant with the T-code MIGO, when I referred the outbound excise invoice that was created in the previous step with the T-code J1IIN (put Excise Invoice No. and Date), I got the following error message "Excise invoice doesn't exist in the supplying plant" and not any Excise Value is flowing from the Excise Invoice in the screen of MIGO.
The CIN configuration and master data in J1ID seems to be ok.
Please provide the expert opinions to overcome the issue.
Thanks in advance
Rajesh Praveen

I did Goods Receipt with reference to Outbound Delivery in the Receiving Plant without referring any Excise Invoice Number (as our system has been designed now like this). I updated part RG23A part 1 using the material document number (generated as a result of Goods Receipt) in J1I5.
Now I am trying to post RG23A part 2 in J1IEX with reference to the material document number (generated as a result of Goods Receipt) and putting the Excise Number created in J1IIN earlier. The system is picking BED, ECS and SECess values but the value of Base Value is not being picked up as a result of which I am not able to post the Excise Invoice.
Please provide some idea to resolve this
Thanks in advance

Stock Transport Order deletion in case of GR

Hi all,
I have an stock transport order (STO) between plants with delivery output posted (Goods Issue) and also with a goods receipt in destiny plant.
Problem is that if I set deletion flag in STO, system allows me to do that without any warnings.
Is there a way to validate when a STO has been received by the destiny Plant?
Thanks & Regards,
AW

Yes. It is a standard behavior. System will allow to delete the line item which has completed the good issue and goods receipt both.
Actually the status of this STO got completed after you post goods issue and goods receipt.
It is also like normal PO, when goods issue and MIRO has done, then you can set deletion flag to line item. System will allow deletion flag for archive process.
If you want to restrict that, then you have to use badi or exit for that by your own logic.
You can use the badi ME_PROCESS_PO_CUST.

HELP for all 5 TYPES of STO Stock Transport Orders with detailed scenario

PLEASE help me understanding the detailed scenarios for all 5 TYPES of STO s
as in my day to day job activities , i frequently handles issues related to STO s
PLEASE HELP WITH DETAILED STEP BY STEP SCENARIOS

Hi Jagatram,
Standard SAP has the following methods For Stock transport order:
1) One Step Transfer stock without using purchasing documents; Use movement type 301.
2) Two Step Transfer stock without using purchasing documents; Use movement type 303 in Supplying plant and movement type 305 in receiving plant.
3) Using Standard Transport Order (STO) without delivery in two steps. STO created in T-Code ME27, receiving plant posts goods issue (for returns), movement type 351 and supplying plant post goods receipt from using movement type 101.
4) Using Standard Transport Order (STO) with delivery in one step. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 647 and goods receipt document with movement type 101 both created in one step.
5) Using Standard Transport Order (STO) with delivery in two steps. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue posted (for materials to be returned) with movement type 641.Goods receipt is posted in the supplying plant, movement type 101.
6) Using Transportation scheduling agreement (TSA) with delivery in two steps. TSA created in T-Code ME37. Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 641. Goods receipt is posted in the supplying plant, movement type 101.
To achieve it, necessary configurations has to be done in Tcode- OMGN.
SPRO>> Materials management>> Purchasing>> Purchase Order>> Set up Stock transport Order:
1. Plant: For the receiving plant, maintain customer No-Plant (If using STO with delivery), for the Sales Org, Dist channel and Division.
2. Checking Rule: Create checking rule.
3. Define checking rule : Usually no change required here.
4. Assign delivery type/checking rule: Assign the document type(UB) - Supplying plant- Delivery type(NL).
5. Purchasing document type: Maintain the supplying plant- Receiving plant relationships for the doc type-UB, either 1-step or 2-step, as per business.
Hope this helps!
Regards,
Shilpa

Stock Transport order with Freight Charges- Payable to an external vendor

Hello
we are implementing the stock transport order between two plants in SAP 4.7. The document type is UB and it has to be a two step process. We need to post the Freight Charges as well. The freight Provider is external vendor.
What is the best way of configuring this scenario for freight cost?
I did put the freight forearder vendor code on the conditiond tab detail of condition tyep FRA1 but can't do the invoice verification for the same.
Any tips are appreciated.

Hello,
This EhP4 feature addresses only the one step Stock Transport Order to subcontracting vendor for intra company.
Does anybody know how to do a two steps Stock Transport Order to subcontracting vendor for intra company?
By "two steps" I mean:
1- Goods Issue from supplying plant A to in-transit stock of the subcontracting vendor at receiving plant B.
2- Inbound Delivery Notification (IDN) at receiving plant B + Goods receipt against this IDN into the subcontracting stock at receiving plant B.
Thanks and regards,
Stéphane

Logistics Invoince Verification on Stock Transport Order without Goods Rec.

Similar Messages

Maybe you are looking for