Logitec H360 USB headset sound output

Macbook Pro, 10.8.3, 2.8 GHz, 2 core, 8 GB RAM, I am using Logitec H360 USB headset with Adobe Connect. Sound output is through built-in speakers and not the headset. The mic works ok. Correct setting in System Preference and Adobe Connect audio setup wizard. I have the same results with another Logitec headset. I can get headset output sound to work with a headset that has mini-plugs and a iMic adaptor.

Just one thought...
IF there is a setting in the game where you can select the soundcard/audio out then you might just be able to route voice thru that and game sounds thru the soundcard.
I have used my usb headset for voice/talk and set the soundcard for all other audio.

Similar Messages

Audio output using Logitech Clearchat Pro USB headset sounds like chipmunks

I use a Logitech Clearchat USB headset for online meetings daily. On my previous machine (Black MacBook 2GHz) the headphones and mic worked fine. I just upgraded to a new 2.66 Unibody MacBook Pro and while the microphone works fine but the audio in the headphones sounds like chipmunks. If I switch the audio output to the speakers, the audio sounds fine.
Logitech claims that since the drivers the headphones use are built-in, it's not their issue. I'm curious if anyone else has experienced this problem and how I might be able to get it resolved.
Thanks.

' orangehat I sincerely hope you (we?) get an answer on this one! I ordered exactly the same headset the same time I did my 17-inch MBP. Still waiting for everything to be delivered - so can't say as yet whether I have the problem too. Hoping not.
' Hoping there's an answer to your question anyways so I can get an idea of things before my kit lands (IF that EVER actually HAPPENS!!!)
~Menageryl
-Jack of All Trades, Master of Some!-

MacBook Air: automatic selection of USB headsets for sound output

Is there a way to let the MacBook Air automatically detect an external USB headset,
and switch from internal speakers to the USB headset, and reverse to speakers when the
USB headset is disconnected ?
It's nice that you can manually select the output in System Preferences / Sound,
but it would be nice also to be able to make the computer use the USB headset
whenever it's plugged in.
Same for the microphone (sound input selection, for USB headsets with a microphone).

USB hub works fine on my 23 Cinema display with the Air, haven't tried the others but I use the USB on display to plug in my mobile broadband ( live out in the sticks and don't get cable or DSL ) and it lets me switch between my Air and MB Pro fine.

[SOLVED] Switch all audio input/output to USB headset

Hi, I have a USB headset that I frequently plug/unplug from the computer. Is there a way to make it the default sound device when plugged, and automatically switch back to the motherboard's on-board audio device when unplugged?
Last edited by stavrakis (2012-04-26 15:57:56)

I have an Intel HDA 5.1 internal audio card, and a 5.1 USB headset, using the modules snd_hda_intel and snd_usb_audio respectively. The internal card is set as card 0, and the usb headset is set as card 1.
I'm using ALSA right now, but I wouldn't have a problem switching to Pulseaudio if it's easier.
EDIT: I used pulseaudio and solved it for applications that are not already playing sound (not shown on pavucontrol's Playback tab)
I created a udev rule, which executes a script when card1 is inserted, since I know it is the USB sound device:
SUBSYSTEM=="sound", KERNEL=="card1", ACTION=="change", RUN+="/home/stavros/bin/pulse-ins.sh"
This script (pulse-ins.sh) executes another script as the current user:
#!/bin/bash
su -c "/home/stavros/bin/pulse_insert_card.sh & exit" stavros
pulse_insert_card.sh contains the following:
#!/bin/bash
/usr/bin/pacmd set-default-sink alsa_output.usb-0d8c_USB_Sound_Device-00-Device.analog-surround-51
/usr/bin/pacmd set-default-source alsa_input.usb-0d8c_USB_Sound_Device-00-Device.analog-stereo
These 2 scripts and the udev rule automatically change pulseaudio's default output & mic input when the card is inserted. However, applications already playing music have to be switched manually through pavucontrol.
Sometimes, the card is incorrectly identified as "Analog Stereo Duplex", with no 5.1 option. In that case killing pulseaudio and letting it start again solves the problem.
Last edited by stavrakis (2012-03-31 11:49:43)

Robotic Static Sounds USB Headset

Issue: When using any USB headset or USB audio input device on any Macintosh with any operating system from 10.5.7 to 10.6.1, after about 10-20 minutes of use, all audio from the headset becomes garbled and has a robotic static sound quality.
Tested with: Dozens of different Macintosh Computers over the last 6 months with different USB headsets and microphone input devices.
Reproducable: Yes, via either Garageband, Ventrilo or a number of other software applications that do USB Audio Input
References:
http://www.ventrilo.com/forums/showthread.php?t=37302
http://forums.worldofwarcraft.com/thread.html?topicId=17367983174&sid=1
http://discussions.apple.com/thread.jspa?messageID=9983346&#9983346
http://ministryoftruthblog.blogspot.com/2008/10/fixing-usb-audio-static-on-mac-o sx.html
http://forum.skype.com/index.php?s=d9c3718b7185c8e1caee585c248c3bab&showtopic=75 528&st=40
Additional Information and attempted fixes:
• Tried it with a powered USB Hub
• Switched the Audio Midi Setup input to 48k
• Using Audio Midi Setup to create an aggregate device
• Tried it on different Macs, Different Headsets and Different physical locations
• Tried different USB ports
Message was edited by: Jaycyn

I have a 27-inch i7 iMac running 10.6.2 and I can confirm that replacing the kernel extension from 10.5.6 works just fine. I had been having this problem every since 10.6.2 (for some reason it worked up until then). I don't think this fix will work if you are booting with the 64-bit kernel (the default on ALL macs is to boot the 32-bit kernel so you would specifically have to be doing this). I haven't tested it in 64-bit though.
Here are the steps I followed:
1) Download the AppleUSBAudio.kext from 10.5.6 from the following URL.
http://evo-wiki.cern.ch/twiki/pub/FAQ/AudioProblemMacOSX1057/AppleUSBAudio.kext. zip
2) Unzip it.
3) Open up terminal
4) Make a backup of the existing driver by running the following in terminal
cp -Rp /System/Library/Extension/AppleUSBAudio.kext ~/Documents/AppleUSBAudio.kext-BACKUP
5) Exit any applications that are using a USB audio device and unplug all USB audio devices.
6) Unload the existing AppleUSBAudio driver from the kernel by running the below command in terminal.
sudo kextunload /System/Library/Extensions/AppleUSBAudio.kext
If you get an error saying " not found for unload request" your fine. If you get an error claiming it can't be unloaded because its in use (don't have the text in front of me) then stop and go back to step 5.
7) Remove the existing driver by running the following in terminal.
sudo rm -rf /System/Library/Extensions/AppleUSBAudio.kext
8) Put the new driver in place by running the following in terminal.
sudo mv ~/Download/AppleUSBAudio.kext /System/Library/Extensions/AppleUSBAudio.kext
9) Load the new driver by running the following in terminal.
sudo kextload /System/Library/Extensions/AppleUSBAudio.kext
10) Confirm the new driver is loaded by running the following in terminal.
kextstat | grep AppleUSBAudio
The output should look like the folliowing (the 2.5.8b13 is the important bit, some of the other numbers might be slightly different):
cfb@snarfblat:~/> kextstat | grep AppleUSBAudio
141 0 0x96c6f000 0x28000 0x27000 com.apple.driver.AppleUSBAudio (2.5.8b13) <95 94 30 14 8 7 5 4 3 1>
At this point you should be good to go. The only issue with this "fix" is that any time there is an update from Apple there is a chance that the driver will get replaced with a newer one. After each update you should run the command from step 10 again to confirm that you have version 2.5.8.b13. If it gets updated, repeat the above process.
NOTE: Jaycyn I have tried to post this to your WoW forum post of the same issue (http://forums.worldofwarcraft.com/thread.html?topicId=22048900603&postId=2204747 77020&sid=1#18) as that is how I found this thread and the solutions but there is something messed up with my forum account preventing me from posting to the WoW forums.

Bug? USB microphone sound over headset

Since the upgrade to Lion I can hear myself speak via the microphone of my Logitech USB headset through the headset itself. Not through the external speakers though. Whatever I set the output to, my sound is hearable through the headset.
Anyone else experiencing this? Is this a bug?
There is no 'mute microphone sound' option anywhere like there is in Windows as far as I know.

more regarding this here:
https://discussions.apple.com/thread/2166616?start=45&tstart=0

What to do when suddenly no sound from usb headset

I haven't use my linux in the past 3 days and when today I logged in I noticed I don't hear anything. I checked some other apps, but no good.
It works when I unplug my usb headset - I mean the built-in speakers do.
In pavucontrol I saw the lines moving so there is sound, I just can't hear it. I tried changing the device for output and the application currently in use, but nothing.
The only suspicious thing is that I have a 3rd device called "LADSPA Plugin Multiband EQ on Internal Audio Analog Stereo". I guess it's related to the pulseaudio-equalizer I installed about a week ago, but after doing that I had sound, I watched some movies and I had no problem at all.
Having no better idea, I removed pulseaudio-equalizer, restarted my notebook, but I still have that device.
I wanted to check the volume levels in alsamixer, but I don't have that, because it usually scr*ws up the volume levels, I only have installed what's said in the pulse wiki, but it's unrelated now, I guess.
My linux is fully up do date and I don't see anything unusual in my rc.conf.
What should I do? Where to look for the solution?

This problem is bizarre.
Basically - I have an audio interface connected via USB, then one day i get the message 'usb device disabled drawing to much power....'
So i tried a few different cables, and 1 cable worked fine.
Now all of a sudden, the problem is back - the cable that was working fine is now not working fine.
I've tried 8 USB leads, reset the SMC, reset PRAM, etc etc......
All the 8 USB leads i have work fine with other stuff, but as soon as i plug this audio interface in, it doesnt see it. The interface is fine because i've tried it in another computer.
I've lost a lot of faith in apple products over the last year or 2. It seems like theres always some sort of bug/problem. This will be the end of the line for me now. I just can't trust the quality or reliability of their products anymore.

Intermittent USB Sound Output

I have an Al Macbook Running Leopard, 10.5.8. I just purchased a Monoprice Mini Displayport Male and USB Male Audio to HDMI Female Converting Adapter
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=5969&seq=1&format=2
The goal is to output both video and sound from my computer to my audio receiver’s HDMI input then onto my TV and my surround sound speakers. The first time I set up my system I wasn’t getting any sound thru the USB to my receiver. I then plugged and unplugged the cables multiple times and got the sound to work. I didn’t change any settings in my Preference panel. Last night I hooked my computer back up to the cable and it didn’t output sound. Is there a sure fire method to ensure that my USB port is outputting sound to my HDMI adapter?
One other symptom, when I was getting sound out of my cables, I could close the lid of the computer and still get video and sound out. Last night, when I was using the cables and I tried to shut my lid, the computer went to sleep and I lost all video signals.

Hi, Ulyssesbob ,
welcome
first of all, i don't know about the adapter you are using. but here are a few remarks:
1) closing the lid of the MB means that is has to go to sleep. So the instance you quote, that it continued playing video and music, is not normal. it is normal to stop all activity when you close the lid of the MB.
2) when setting up new connections with sound (and video), the system needs a bit (few seconds) of time to recognize things. Once there are multiple output possibilities, the system can chose by itself the one you would like, but a priori, the MB doesn't know which one is the right one. You should check the Syst.Prefs and set it to the one you need. This also implies: if you disconnect, the MB might change the Syst. Prefs by its own decision, since it will not put output to an nonexisting device...
I would try to reset it up, slowly, and controlling every step you are doing by looking at the system prefs settings. Hope this works out. If you still have problems, or your MB behaves strangely, please report back.
Thomas

DYNEX USB Headset no sound

Hello everyone,
I plugged in my DYNEX USB headset for the first time using ARCH linux, and I have no sound.
Things I did to try and make it work:
-It was recognized in alsamixer's sound card selection. I selected the card.
-I unmuted the master sound in alsa by using the command: amixer sset Master unmute.
-I used pavucontrol to select the headset
Anyone have any ideas why i am not getting any sound?

Better bouble check if it is unmuted and volume not 0 - not just "alsa master" like you did with amixer; it's probably best if you select the card in alsamixer (F6 or something) and check the channels. You can save those settings with "alsactl store".
Do you have sound if you select the headset for an application stream manually?
( p.E. start video in mplayer, look for it in pavucontrol under playback / applications, set its sink to the headset )
If that works the easiest way to get it working permanently might be:
- activate module-combine at the the TOP of /etc/pulse/default.pa MANUALLY (it tends to map channels wrong if you have more than 2; also that should ensure that the combine sink is always at the top, which can avoid some trouble).
e.g.
load-module module-combine channels=6 channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe
( surround example; customize for your channels )
- delete the default / per application settings in ~/.pulse/* (in my experience those get rather useless in any case after a new sound device is added)
- make sure your combined sink is at the top with "pacmd list-sinks"
example:
$ pacmd list-sinks | head
4 sink(s) available.
* index: 0
name: <combined>
driver: <module-combine-sink.c>
flags: DECIBEL_VOLUME LATENCY
state: RUNNING
suspend cause:
priority: 1000
volume: front-left: 45864 / 70% / -9,30 dB, front-right: 45864 / 70% / -9,30 dB, rear-left: 45864 / 70% / -9,30 dB, rear-right: 45864 / 70% / -9,30 dB, front-center: 45864 / 70% / -9,30 dB, lfe: 45864 / 70% / -9,30 dB
- make it the default sink:
pacmd set-default-sink "combined"
You might have to "killall pulseaudio" before / in between steps to make sure it reloads settings / doesn't change them back etc.
Good luck!

Logitech USB headphones - microphone works but not sound output

Seems like the sound output to my Logitech USB headphone has stopped. The microphone inputs but the sound output is blocked. Could be technical issue with the set but was wondering of anyone else has this problem after the last update to 10.14.0

ChickInVici,
Having similar issue with iPad 2. No volume on Apps or Music (except when using headphones). Just started happening after months of no issues. Have reset/ restored with no solution. Can you provide more detail with your solution? I went to >settings>accessibility>voiceover.....but could not find headphones etc... what am I missing. Could you be more specific on what you changed to resolve your issue.
thanks

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

See these threads for some possible solutions:
Bluetooth and 10.7
Bluetooth speaker error

Metallic sound in USB headset

I am doing some voice recording and was told I'd get better quality using a USB headset instead of the analog one I had been using before. However, all my voice audio using the USB headset has a metallic kind of sound quality to it whereas the analog headset audio sounds pretty decent. Are there some different settings for the USB headset that I should be using?
Thanks,
Whitney

Nevermind, I figured it out. I needed the .asoundrc file in my home directory with the headset set to the default device.

USB (Mega stick), sound output and PS2 problems

==USB problem==
The MSI MEGA STICK do not work with the MSI K7N2 Delta ILSR.
When you plug it, its recognized, you can write on the MEGA STICK, delete files but cannot READ from MEGA STICK. It freezes while display "reading". I have tried on lots of PCs. Only my MSI motherboard do not work properly. The same problem with my 2 MEGA STICK. And i had tried Windows XP and Linux. Same problem. Others USB devices works fine. Even card readers...
==PS2==
My optical wireless mouse do not works properly. When i turns on the computer, it works ok. If i restart, do not work. Restart again, works. And go on... Only this mouse. Others MB works fine.
==Sound Output==
And also with my sound output. The eletrical one (coaxial).
It do not work with my 5.1 home system. It works fine with my old SB Live. It gets worse when i use my tv output from my Radeon 9100. It only works SOMETIMES when the tv output is not plugged in.
Thanks to all that could help me.

Mega stick.
have you updated the firmware ?
No. It Freezes before being able to update. Also the update do not tell about solving this problem
"Firmware version: 2.05
Update items
1. Improve delete MP3 and voice files function.
2. Fix device will restart while forward/backward Voice file."
you do know that windows xp does not come with usb2 drivers.
sp1 does and you have to install them yourself.
go to device manager and delete all usb entries and reboot and windows will install the usb2 drivers next time you boot.
if you get a slipstreamed version of xp you dont need to do this as it installed usb2 drivers rightaway.
slipstream means a xp disc with sp1 on it.
My XP cd is already SP1. Also tried on BIOS to use only USB 1.1V
PS2.
tried to use the other ps2 contact ?
No. Could i use the keyboard PS2 to plug the mouse?
SOUND.
this is not my area but it could be a good idea to post what the equipment is.
have you tried the latest drivers from http://www.nvidia.com ?[/quote]
Its a brazilian brend. You wont know. CCE. Its works fine with DVDs, my old SB Live! and others. Only with my K7N2 do not work properly. Its an AC3 decoder. The problem gets worse when i use the Radeon 9100 tv out.
Look like the problem on this thread.
https://forum-en.msi.com/index.php?threadid=29572&sid=&hilightuser=26427
This is my old thread. Never solved. :-(
https://forum-en.msi.com/index.php?sid=&postid=319195#post319195
When i updated the BIOS, it got even worse. Not even with the tv output unplugged it never worked anymore...
Its very disapointed to buy an expensive MB and realized that it do not work properly...
Thanks yo your help.

Fatality usb headset and sound set up

I recently bought the Xtreame gamer and I used a non usb headset. i heard the fatality ones were good so i bought the usb ones. i installed them and what not but the sound seems to be off. also now i cant hear that helicopter test thing when i click play for the cmss-3d... what are some tips to set up my sounds correctly? in game my ventrillo sounds change and ingame also. weird effects. i tried other headphones and they work fine. i use xp also.
Message Edited by polecats03 on 04-13-2009 12:31 AM

Yes you can.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Messages won't connect to bluetooth headset for sound output

I have a Plantronics Voyager Legend bluetooth headset that can pair with more than one device. I got it so I could switch back and forth from my phone to my MacBook Pro (running Mavericks) easily. It works great everywhere. EXCEPT, it won't work for Messages sound output. I've talked with three different Apple support people and with Plantronics. I tried a workaround I found elsewhere using Soundflower, but that did not work either. I've checked all settings, unpaired/repaired, shut down/rebooted/reset; looked for software issues; downloaded the current firmware; tried turning bluetooth off my phone to see if that was an issue; and probably some other things I'm forgetting; all to no avail.
Any ideas?

Following up on the above...
My S10-HD paired straight out of the box w/ my iPod Touch 2G; however, when I tried to pair it with my iPad 2, the iPad 2 would just search...and search...and search.
On page 7 of the S10-HD manual, you'll see a note saying, "To pair your headphones again, press and hold the "0" (power) key until the status light becomes steadily lit in blue".
This proved to be the key to getting the S10-HD to work with the iPad 2. The S10-HD needs to be "off", then you'll have to press and hold for around 7 to 10 seconds.
Furthermore, it appears (from my own testing; your results may differ) that the S10-HD can only be paired to one device at a time. That may sound obvious, but what it means is that you'll first have to turn off Bluetooth on the paired device with which the S10-HD is currently connected, then connect it to the other device with which it is already paired. (Kind of a pain, but I can live with it.)
Also, if there's anyone considering the S9-HD or who's had an S9-HD fail because of sweat incursion (i.e., you use it at the gym, etc.), Motorola is offering a warranty upgrade from the S9-HD to the S10-HD. What you need to know is: (1) The S9-HD will fail from the least bit of sweat entering the unit through the speakers; and (2) The S9-HD sounds better than the S10-HD (a lot better...it's a tradeoff you have to be willing to live with if you want these for exercise). To get the S10-HD if you've experienced prob's w/ your S9-HD as described, call Julie Scofield in the Consumer Advocacy Office at Motorola's Corporate Headquarters: (847) 523-5852.

Logitec H360 USB headset sound output

Similar Messages

Maybe you are looking for