Logitech bluetooth speaker adapter kaput since update

Since the new Mac OS X 10.7.3 update, my Logitech Bluetooth speaker adapter has not functioned. When I choose to use it as my audio device, there is a very long pause and then I receive the message "A Bluetooth audio error occurred." (Normally, I wait through a short pause after which I hear a beep from my stereo speakers that tells me that the Logitech adapter is working.)
This device has been working fine since I bought it two months ago. It hasn't worked since the update.
I'm running a MacBook Pro (2.2GHx Intel Core 2 Duo w/ 4GB 667 RAM).
Anyone else having this problem? I am not sure if this problem is directly related to the update. Just looking for info right now.

Greetings everyone! I reinstalled Lion and paired my Logitech Bluetooth Headset at 10.7.2. But the system won't connect to it after updating to 10.7.3.
Finally I made my bluetooth headset work again. Here's how I did it;
1. In Preference>Bluetooth, remove my paired device. Reboot mac.
2. Deleted the following two files in Library/Preferences/
---com.apple.Bluetooth.plist
---com.apple.Bluetooth.plist.lockfile
(These files will be reconstructed by the system)
The system will ask for your administration password. Reboot mac.
3. In Preference>Bluetooth, pair my BT headset again and assign it to be the audio device. You may find the BT device not connected, then by playing a music or youtube video, connection should be established and sound is output.
4. Reboot to make sure BT headset work steadily(leave the BT headset turned on). But I encountered kernel panic and forced restart (twice!) Upon the third restart, I logged in, and BT headset worked properly.
The normal situation is, Mac automatically connects to BT headset few seconds after the headset is turned on. And I think we can just turn off BT deveice (whenever we don't need them) instead of disabling Bluetooth in Preference. Just leave the BT settings, so next time your Mac sees the BT device, it automatically connects to it.
I hope the above information can be helpful. Any comments are welcomed!

Similar Messages

Logitech Bluetooth Speaker Adapter Update OS X?

Hi, i bought a logitech z506 5.1 speaker system for my mbp and with it i got a Logitech Bluetooth Speaker Adapter with the set. I then tried to pair my iPhone with the adapter and BAM straight in and playing via bluetooth onto my speakers. But then i tried it with my mbp, no luck, pairs then disconnects and no sound . Phoned logitech and they said that the adapter doesn't work with OS X Lion which is slightly annoying as i just paid £90 for this set and adapter. Anyone know if there will be some sort of update. I doubt it because it is such a small number of people that this effects. Thanks

I am having this problem right now too only difference is that I am using a bluetooth headphone rather than a speaker. The volume is very low and it would disconnect automatically if my bluetooth headphones are not playing any audio. I never had this issue until I updated to 10.7.4. I tried searching for solutions but I couldn't find any. I am hoping as well that someone will find a workaround about this issue.

Bluetooth Speaker adapter

I've been trying to setup a bluetooth connection between my mac and bluetooth speaker adapter that is hooked up to my home stereo. The pairing is working and it shows up in my bluetooth settings, but it is showing that the bluetooth adapter is not connected. I have tried with multiple adapters and nothing. I thought I read somewhere that Leopard is the first OS that supports this type of pairing, and obviously I'm still running Tiger. Is this true? Any ideas? I'm getting frustrated trying to figure this out.

Greetings everyone! I reinstalled Lion and paired my Logitech Bluetooth Headset at 10.7.2. But the system won't connect to it after updating to 10.7.3.
Finally I made my bluetooth headset work again. Here's how I did it;
1. In Preference>Bluetooth, remove my paired device. Reboot mac.
2. Deleted the following two files in Library/Preferences/
---com.apple.Bluetooth.plist
---com.apple.Bluetooth.plist.lockfile
(These files will be reconstructed by the system)
The system will ask for your administration password. Reboot mac.
3. In Preference>Bluetooth, pair my BT headset again and assign it to be the audio device. You may find the BT device not connected, then by playing a music or youtube video, connection should be established and sound is output.
4. Reboot to make sure BT headset work steadily(leave the BT headset turned on). But I encountered kernel panic and forced restart (twice!) Upon the third restart, I logged in, and BT headset worked properly.
The normal situation is, Mac automatically connects to BT headset few seconds after the headset is turned on. And I think we can just turn off BT deveice (whenever we don't need them) instead of disabling Bluetooth in Preference. Just leave the BT settings, so next time your Mac sees the BT device, it automatically connects to it.
I hope the above information can be helpful. Any comments are welcomed!

Z10 Bluetooth problem with handsfree since update to 10.1.0.273

Hello,
since the update to 10.1.0.273 my bluetooth connection with handsfree in my car doesn't work properly anymore.
A new pairing with the handsfree was also unsuccessful.
With Software 10.0.10.90 all functions works correct.
Then I tried to connect to my notebook and my nokia lumia first time.
Pairing initially was OK, but then the error message "Es ist kein Netz zur Verbindung verfügbar. Sie können Dateien mit diesem Gerät über andere Anwendungen freigeben."!
What does this mean???
Can anybody help me?
Solved!
Go to Solution.

Some feedback from blackberry would be good. I don't want to have to change to an iPhone if possible

Weak Bluetooth Signal MacBook Pro 2011 Lion - Wireless Speaker Adapter

I just bought a wireless bluetooth speaker adapter (http://amzn.to/IRhKlX) and my signal strength between it and my macbook pro is very low, around -70dB in the bluetooth preferences thing. While it works with my cell phone, and two other non-mac laptops, the audio from my mac sounds like a skipping cd, and I'm about 2 meters away with nothing blocking the line of sight. Even if I place my mac next to the adapter, the audio quality doesn't seem to improve, though the signal strength increases to about -60dB. Can anyone help me figure out what's going on here?
Thanks!

Any or all of the following third-party system modifications may be contributing to your problem:
Apogee device and/or driver
Tuxera NTFS driver
If the panic is recurrent, I suggest you uninstall them, one at a time, according to the developers' instructions, to see whether you can identify which one is at fault. A conflict between modifications may be involved. Reboot and test after each uninstallation.
Back up all data before making any changes.

HT1338 bluetooth says it has connected to my bluetooth speaker device yet nothing plays?

i have a logitech bluetooth speaker and my bluetooth on mac says it has connected yet nothing plays and when i click disconnect it doesnt disconnect, i think my bluetooth doesnt work on my mac, i dont think i have ever had a products that works with bluetooth, rubbish idea!

Post in the iPad forum.

Since I have updated to 10.7.4 my Bose Sounlink Bluetooth speaker sound very low

Since I have updated to 10.7.4 my Bose Sounlink Bluetooth speakes sounds very low.. OK with iPhone and iPad

This happened to me exactly! What I did was I went into Audio MIDI and clicked on Bose Soundlink tab. You'll see 3 bars; master, 1 & 2. Max out all the bars and that should fix the problem. Hope that works for you.

Bluetooth audio not working since 4.4.2 update

Since the update to 4.4.2 bluetooh audio no longer plays to my Marley Bag of Riddim portable bluetooth speaker...
http://www.thehouseofmarley.com.au/audio-systems/bag-of-riddim-bluetooth-portable-audio-system.html
But it does still work with my LG HBS730 bluetooth headset...
When on 4.3 it worked fine...with both the Bag & Headset
Interesting to note that my old HTC Desire (android 2.3.3) still streams audio via bluetooth fine to the Bag and also to my LG HBS730 bluetooth headset.
How can i fix it please? It is clearly releated to the 4.4.2 android update...
Thanks
Paul
Edit: Is it possible to roll it back to official droid 4.3 ??

I have same problem, after update no sound from my car player pioneer Mvh-350bt.

Tv adapter not working since updating ios

since updating my iPad 2 to iOS 8 my tv adapter no longer works, when I plug the adapter in a message comes up stating this device is not supported by apple

Hello jimtallis,
The steps detailed below may help get your TV adapter to function correctly.
Check the compatibility
Make sure the accessory is compatible with your device. If the accessory is on the Apple Online Store, you can see if your iPhone, iPad, or iPod touch model is listed as compatible.
If your accessory uses the 30-pin connector, you might be able to connect it to your device using the Lightning to 30-pin Adapter or Lightning to 30-pin Adapter (0.2 m).
See if your accessory's compatibility is limited. For example, some accessories might not charge iOS devices if they use FireWire instead of USB to charge.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Cheers,
Allen

Bluetooth won't discover my iPad2 since updating to iOS 8.2. Have tried hard reboot and restoring.

I have an iPad 2. I use a ZAGG keyboard with it. Since updating to iOS 8, my Bluetooth cannot discover my iPad, so I can't use the keyboard. I updated to iOS 8.2 hoping this would fix the problem. It didn't. I have done several hard reboots following online directions, didn't work. Tried restoring the iPad, didn't work. Is there something else I can do?

FWIW, my Zagg KB works well with my iPAD 2 (IOS 8.1). To my knowledge, there is no 8.2.....
Be sure BT is on. Turn the Zagg KB on. Go to the system area (Bluetooth). Press the connect button on the Zagg. Highlight the device. It should connect.
Barry

Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

Good Morning Denise -
Sorry to hear you are having issues connecting to your Wi-Fi network. I'll include a few more things that you can try to troubleshoot this below. The first thing that I'm wondering is if you cannot connect to your Wi-Fi at home -- are you able to connect to a different Wi-Fi network (at work, a local coffee shop, etc.)? That would be one of the first things to try.
Turning the modem and router in your house of and then on is also a common step as it "reinitializes" everything. Hopefully, one of the steps below will help you with this.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
http://support.apple.com/en-us/HT204051
Restart.
For more help, try restarting your device, router, or cable/DSL modem. After each step, check to see if you fixed the issue.
• Restart your iOS device.
• Unplug your router and plug it back in.
• Unplug your cable or DSL modem and plug it back in.
Still can’t connect?
Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
Get more help
Try connecting to a Wi-Fi network in a different location. If your device can connect, you’ll need to get help with your Wi-Fi network. If it can’t connect to any Wi-Fi networks, contact Apple.
iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
http://support.apple.com/en-us/HT202068
All the best,
- Judy

Since updating to software 5.01 bluetooth headphone controls do not work

Rocketfish headphone controls do not work since updating to software 5.0.1. Headphones pair and can only be used for listening.

I have similar problems with nokia bluetooth stereo headset bh-503 and Ipod 4/ iOS 5.0.1. it is not working at all, the ipod can't recognize the headphones. There is any solution in this version or in some future? Thanks

Iphone 4 bluetooth connectivity problems since updating to ios 5.01

My wife and I both have an Iphone 4 through verizon. I updated my ios to 5.01. Hers is still 4.3.10. Since updating mine the bluetooth feature have gone crazy. When I get in my truck (2008 Nissan Frontier) it just continually connects and disconnects with the built in blue tooth system in that vehicle. I cannot make or take a call on the system it just keeps dropping the connection then re-connecting. Funny thing is my wife's phone doesn't have this problem. It connects and functions normally.
I wanted to just roll back ios 5.0.1 but I've found out you aren't allowed to do that. Nissan has no updates for their bluetooth system either.
I have gone the extreme of completely wiping out my iphone and re-installing everything fresh and that has done nothing. I have also tried completely deleting all the phone saved in the truck's system and re-setting them up and that too has done nothing to fix the problem.
Anyone have a suggestion? I have to think that there is something in ios 5.0.1 that is messed up with bluetooth.

Interesting discussion. I too am having connection issues with an original iPad. I have an olde' linksys wrt54gs router with a Linksys RE1000 wireless extender (repeater). I can connect to the router just fine when I'm in range but can't use the repeater signal on this iPad only. Even when I'm right on top of it. One thing that may have helped is changing from WPA2 to simple WPA encryption in the routers settings. So far (crosses fingers), it's working ok.
-Jim

Logitech Bluetooth adapter not going into HCI mode

Hi.
I just installed Arch-Linux on a HP Compaq T5000, and is actually quite pleased with it.
It runs much faster than Ubuntu server, and uses much less resources than ubuntu did (it's a thin client, it only got 128 MB ram and 800 MHz cpu, though i use it as a server ).
Now, apart from serving my iTunes library, playing music on remote speakers, backing up my data, and doing a billion other things, i wanted it to serve a Bluetooth PAN network. So, i plugged my Logitech Bluetooth adapter (From a keyboard/mouse combo) in, and it was registered as a HID device. I then ran hid2hci to make it run in HCI mode, and it said it succeded. But, hcitool dev didn't give any devices, and dmesg said this:
usb 1-1: new full speed USB device using uhci_hcd and address 8
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
usb 1-1.2: new full speed USB device using uhci_hcd and address 9
usb 1-1.2: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:10.0-1.2
usb 1-1.3: new full speed USB device using uhci_hcd and address 10
usb 1-1.3: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8
input,hiddev0: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:10.0-1.3
WARNING: at drivers/hid/hid-core.c:784 implement()
[<c78634a0>] hid_output_report+0x130/0x310 [hid]
[<c0194603>] mntput_no_expire+0x13/0x70
[<c78984d8>] hid_submit_ctrl+0x58/0x200 [usbhid]
[<c015dd35>] filemap_fault+0x215/0x470
[<c78987cc>] usbhid_submit_report+0x14c/0x1b0 [usbhid]
[<c789b076>] hiddev_ioctl+0x3f6/0xb40 [usbhid]
[<c016a03d>] handle_mm_fault+0x11d/0x760
[<c017c885>] nameidata_to_filp+0x35/0x40
[<c0139507>] __atomic_notifier_call_chain+0x27/0x50
[<c018a508>] do_ioctl+0x78/0x90
[<c018a74e>] vfs_ioctl+0x22e/0x2b0
[<c017c9ac>] do_sys_open+0xbc/0xe0
[<c018a82d>] sys_ioctl+0x5d/0x70
[<c01044fa>] syscall_call+0x7/0xb
=======================
WARNING: at drivers/hid/hid-core.c:784 implement()
[<c78634a0>] hid_output_report+0x130/0x310 [hid]
[<c0194603>] mntput_no_expire+0x13/0x70
[<c78984d8>] hid_submit_ctrl+0x58/0x200 [usbhid]
[<c015dd35>] filemap_fault+0x215/0x470
[<c78987cc>] usbhid_submit_report+0x14c/0x1b0 [usbhid]
[<c789b076>] hiddev_ioctl+0x3f6/0xb40 [usbhid]
[<c016a03d>] handle_mm_fault+0x11d/0x760
[<c017c885>] nameidata_to_filp+0x35/0x40
[<c0139507>] __atomic_notifier_call_chain+0x27/0x50
[<c018a508>] do_ioctl+0x78/0x90
[<c018a74e>] vfs_ioctl+0x22e/0x2b0
[<c017c9ac>] do_sys_open+0xbc/0xe0
[<c018a82d>] sys_ioctl+0x5d/0x70
[<c01044fa>] syscall_call+0x7/0xb
=======================
WARNING: at drivers/hid/hid-core.c:784 implement()
[<c78634a0>] hid_output_report+0x130/0x310 [hid]
[<c0194603>] mntput_no_expire+0x13/0x70
[<c78984d8>] hid_submit_ctrl+0x58/0x200 [usbhid]
[<c015dd35>] filemap_fault+0x215/0x470
[<c78987cc>] usbhid_submit_report+0x14c/0x1b0 [usbhid]
[<c789b076>] hiddev_ioctl+0x3f6/0xb40 [usbhid]
[<c016a03d>] handle_mm_fault+0x11d/0x760
[<c017c885>] nameidata_to_filp+0x35/0x40
[<c0139507>] __atomic_notifier_call_chain+0x27/0x50
[<c018a508>] do_ioctl+0x78/0x90
[<c018a74e>] vfs_ioctl+0x22e/0x2b0
[<c017c9ac>] do_sys_open+0xbc/0xe0
[<c018a82d>] sys_ioctl+0x5d/0x70
[<c01044fa>] syscall_call+0x7/0xb
=======================
WARNING: at drivers/hid/hid-core.c:784 implement()
[<c78634a0>] hid_output_report+0x130/0x310 [hid]
[<c0123a8c>] update_stats_wait_end+0x9c/0xd0
[<c78984d8>] hid_submit_ctrl+0x58/0x200 [usbhid]
[<c78987cc>] usbhid_submit_report+0x14c/0x1b0 [usbhid]
[<c789b076>] hiddev_ioctl+0x3f6/0xb40 [usbhid]
[<c016a03d>] handle_mm_fault+0x11d/0x760
[<c017c885>] nameidata_to_filp+0x35/0x40
[<c0139507>] __atomic_notifier_call_chain+0x27/0x50
[<c018a508>] do_ioctl+0x78/0x90
[<c018a74e>] vfs_ioctl+0x22e/0x2b0
[<c017c9ac>] do_sys_open+0xbc/0xe0
[<c018a82d>] sys_ioctl+0x5d/0x70
[<c01044fa>] syscall_call+0x7/0xb
=======================
WARNING: at drivers/hid/hid-core.c:784 implement()
[<c78634a0>] hid_output_report+0x130/0x310 [hid]
[<c78984d8>] hid_submit_ctrl+0x58/0x200 [usbhid]
[<c78987cc>] usbhid_submit_report+0x14c/0x1b0 [usbhid]
[<c789b076>] hiddev_ioctl+0x3f6/0xb40 [usbhid]
[<c016a03d>] handle_mm_fault+0x11d/0x760
[<c017c885>] nameidata_to_filp+0x35/0x40
[<c0139507>] __atomic_notifier_call_chain+0x27/0x50
[<c018a508>] do_ioctl+0x78/0x90
[<c018a74e>] vfs_ioctl+0x22e/0x2b0
[<c017c9ac>] do_sys_open+0xbc/0xe0
[<c018a82d>] sys_ioctl+0x5d/0x70
[<c01044fa>] syscall_call+0x7/0xb
=======================
WARNING: at drivers/hid/hid-core.c:784 implement()
[<c78634a0>] hid_output_report+0x130/0x310 [hid]
[<c0123a8c>] update_stats_wait_end+0x9c/0xd0
[<c78984d8>] hid_submit_ctrl+0x58/0x200 [usbhid]
[<c78987cc>] usbhid_submit_report+0x14c/0x1b0 [usbhid]
[<c789b076>] hiddev_ioctl+0x3f6/0xb40 [usbhid]
[<c016a03d>] handle_mm_fault+0x11d/0x760
[<c017c885>] nameidata_to_filp+0x35/0x40
[<c0139507>] __atomic_notifier_call_chain+0x27/0x50
[<c018a508>] do_ioctl+0x78/0x90
[<c018a74e>] vfs_ioctl+0x22e/0x2b0
[<c017c9ac>] do_sys_open+0xbc/0xe0
[<c018a82d>] sys_ioctl+0x5d/0x70
[<c01044fa>] syscall_call+0x7/0xb
=======================
WARNING: at drivers/hid/hid-core.c:784 implement()
[<c78634a0>] hid_output_report+0x130/0x310 [hid]
[<c78984d8>] hid_submit_ctrl+0x58/0x200 [usbhid]
[<c78987cc>] usbhid_submit_report+0x14c/0x1b0 [usbhid]
[<c789b076>] hiddev_ioctl+0x3f6/0xb40 [usbhid]
[<c016a03d>] handle_mm_fault+0x11d/0x760
[<c017c885>] nameidata_to_filp+0x35/0x40
[<c0139507>] __atomic_notifier_call_chain+0x27/0x50
[<c018a508>] do_ioctl+0x78/0x90
[<c018a74e>] vfs_ioctl+0x22e/0x2b0
[<c017c9ac>] do_sys_open+0xbc/0xe0
[<c018a82d>] sys_ioctl+0x5d/0x70
[<c01044fa>] syscall_call+0x7/0xb
=======================
WARNING: at drivers/hid/hid-core.c:784 implement()
[<c78634a0>] hid_output_report+0x130/0x310 [hid]
[<c78984d8>] hid_submit_ctrl+0x58/0x200 [usbhid]
[<c78987cc>] usbhid_submit_report+0x14c/0x1b0 [usbhid]
[<c789b076>] hiddev_ioctl+0x3f6/0xb40 [usbhid]
[<c016a03d>] handle_mm_fault+0x11d/0x760
[<c017c885>] nameidata_to_filp+0x35/0x40
[<c0139507>] __atomic_notifier_call_chain+0x27/0x50
[<c018a508>] do_ioctl+0x78/0x90
[<c018a74e>] vfs_ioctl+0x22e/0x2b0
[<c017c9ac>] do_sys_open+0xbc/0xe0
[<c018a82d>] sys_ioctl+0x5d/0x70
[<c01044fa>] syscall_call+0x7/0xb
=======================
usb 1-1.1: new full speed USB device using uhci_hcd and address 11
usb 1-1.1: configuration #1 chosen from 1 choice
hid2hci says this:
Switching device 046d:c70a to HCI mode was successful
Switching device 046d:c70e to HCI mode was successful
I believe hid2hci doesn't do the job correctly (even though it think it does).
I'm running "Core Dump", and using linux version 2.6.23-ARCH.
Any help would be appreciated.

Hmm... anyone willing to help?
It's not like i'm gonna die of it's not gonna work, but a little response would be nice, even a "That's impossible to fix" would be nice, because then i would know i shouldn't spend a lifetime on this

Can't connect to speakers via bluetooth since updating to Windows 8

Hello all. I have an HP Pavilion dm4 3050 laptop. I have spent a lot of time trying to fix my bluetooth problems since updating to 8, and now I need some help!
I go into add a device in a the CP and the machine finds the bluetooth speakers and I add them. I then right click them-> sound settings, then see my speakers below the default device speakers. They are listed as disconnected so I right click them and try to connect but they won't connect. I have updated the Intel bluetooth drivers but the speakers still won't connect. What can I do? Thank you.

BTW it would be nice if the driver update scanner actually worked on the HP website.

Logitech bluetooth speaker adapter kaput since update

Similar Messages

Maybe you are looking for