Logitech external USB DVD reader/burner model LDR-PMD8U2LBK not recognized.

Got a external USB DVD reader/burner Logitech model LDR-PMD8U2LBK.
I plug the device, use the adapter but nothing happens. I tried to boot the computer with the driver plugged in, again, nothing. If I put a DVD in the driver, I hear the machine buffer but on the screen, nothing. Checked all the view options, everything is selected. It doesn't appear in the Disk Utility neither. Tried to open a DVD with VLC Player, to no avail. Checked on Logitech's site, there are no drivers for this driver. The seller told me that it should be compatible with my black macbook, I guess there is still a possibility that it is not...

You shouldn't need drivers for a USB or Firewire connected external device.
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151?viewlocale=en_US
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
 Cheers, Tom

Similar Messages

Can't boot from external USB DVD reader

Hi! I have a Lenovo IdeaPad S400 and a Samsung external DVD reader. Once, I've installed Windows 7 from that reader. Now I've got Ubuntu 12.10 and want to instal iATKOS ML2 and it just doesn't boot from that reader. It's not just that DVD. I've tried with the same Windows 7 and other Ubuntu disc but it doesn't show up neither.
I'm pretty sure that's something to do with the BIOS, but I can't figure out what!
Hope you can help me. Thanks!
Solved!
Go to Solution.

hi Tiiiincho,
Welcome to the Lenovo Forums.
Can you try to:
1. Press the One Key Recovery button on the left side of the PC and access the BIOS setup utility
2. On the BIOS, navigate to the Boot Tab and set UEFI Mode to Disabled.
3. Insert your iATKOS ML2 or any bootable installation disc and press F10 to save and exit BIOS.
4. During boot-up, hold the Fn key and continuously tap F12 and select the ODD drive on the boot manager.
Your iATKOS ML2 or any bootable installation disc should now start.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Looking to Get an External USB DVD Burner...Will this one Work?

I burn a lot of music to CD (demos for my music that I send out every few months). I've heard a lot of bad things about the internal DVD burner on MacBooks going shot, and I've heard it's an expensive fix.
Since mine is still working totally fine, I wanted to preserve it by purchasing an external USB DVD burner for my heavy music burning.
This Rosewill unit over at Newegg seems to get a lot of positive reviews:
http://www.newegg.com/Product/ProductReview.aspx?Item=N82E16827190020
However, there's no mention of OSX compatibility (there's not really a mention of it for any of ther burners they sell). I wrote Newegg, and they said that they cannot comment on compatibility. I wrote Rosewill directly, and I'm waiting to hear back.
I've heard that basically any USB burner will work with MacBooks, but I just wanted to see if anyone had any direct experience with any of the Rosewill burners?
Thanks.

For anyone that's interested, I received my external USB burner today. For those that didn't see my original post, I burn a lot of demo music CD to send out everyother month, and I didn't want to wear out my internal burner, because I've heard that replacing them is 1) sort of a rough fix to do on your own, or 2) is pretty expensive to have done by Apple.
I received this Rosewill unit from Newegg:
http://www.newegg.com/Product/ProductReview.aspx?Item=N82E16827190020
Plugged it in, iTunes instantly recognized it, and gave me the choice between the external and internal burners. CD's are burning fine. Now I can use and abuse this external with all my burns, and just replace it for $50 if it ever goes shot, and save my internal for software loading, etc.
In short, if you're looking for a nice, little, inexpensive external burner that works with OSX...definitely check this unit out.

Cannot boot to Windows disc from external USB DVD drive.

I have a MacBook Pro 17" Early 2011 8,3. I have tried to use bootcamp to install Windows 7 from a external USB DVD drive. All I get, like many people, is a black screen with a blinking cursor, as if it never makes it to boot. I tried restarting to the OS selection for holding alt, and tried the DVD again, did not work.
I saw a few posts claiming that this didn't work on some models of Mac because of a EFI problem that would not allow booting from a external USB, which is really stupid because it would seems some models can... And MacBook airs can... Can someone please confirm this for me? Has anyone found a resolution?
If not, APPLE PLEASE FIX THIS.

Hi,
Thanks for the reply. Yes the MBP is currently running Tiger, I want to flatten this with a fresh install of Leopard. I can view the install DVD when in Tiger currently.
I haven't tried what you have suggested, but I have seen various posts suggesting this approach. I've also seen several posts explain how to create a partition on an external firewire Harddrive and this seems to have worked for various people.
This would however mean that I didn't really need the external Lacie drive at all, as I've got access to my G5s DVD drive over the network. The more I search on this, the more convinced I am the USB drive was a bad idea.
Once again thank for the response.

P67A-GD65 (B3) will not boot with external USB DVD connected.

Damnedest thing... just put the build together last night and this was the biggest issue. If I connect my external Samsung USB DVD RW the system stops booting and only displays (B3) in the bottom right corner of my display. If I remove the USB plug the system boots and operates normally. If I connect it to the USB port after boot the system recognizes it and it works fine. The same issue occurs no matter which USB2/3 port I plug it into. I've banged around the BIOS and cannot see any issues in the boot sequence that would indicate an issue. Anyone else in das same boot?

Quote from: cadhopper on 24-March-11, 07:19:08
I just came to the forum for the same reason. I'm glad you had a thread already going. Mine is a Seagate 1.5T USB 2.0 hard drive and the screen reads 98 in the lower right corner. Hopefully MSI will get this fixed soon. Other than that the new system is running great.
They are working on it. They sent me a BETA BIOS to try out. The BIOS v1.10B3 was dated 3-17-2011 and it nearly bricked my system though. Here is the response I sent to them the other night after a few hours with a massive headache trying to bring my system back up:
Quote
Tried the new BIOS. While it did indeed fix the USB DVD boot issue and let me boot into windows it created a few new issues. After flashing the new BIOS would not recognize my old overclocking profiles from the v1.8 BIOS.. "hole" error. So I manually adjusted all the settings and saved the new settings. I copied them EXACTLY from my previous settings.. I had screenshots which I had printed out as a fool-proof guide. After rebooting I could no longer get into windows. BSOD. If I tried entering the BIOS by tapping the DEL button while booting the system would freeze at the "entering setup...." screen and never progress into the actual BIOS. I unplugged the power, waited a few minutes and held the clear CMOS button on the back panel down for a few seconds. After rebooting I no longer had video output. After much trial and error I ended up having to also unplug my LCD and cycle power on it as well to get video back. But could still bot get into the BIOS by tapping the DEL key during boot. Luckily I have a laptop with all the files on it and I was able to finally re-flash back to the v1.8 BIOS from a USB drive. I'm not sure what exactly you changed.. but I don't think this new BIOS version should leave BETA status.
To their credit they promptly responded the next AM:
Quote
There were some changes to the CPU voltage, so your overclock settings may not work properly. We are still working on a 1.A release version. It will be updated to our website soon. http://www.msi.com/product/mb/P67A-GD65--B3-.html#/?div=BIOS
I only wish they had informed me of the changes to the CPU voltage up front or included a change log so I could have made an informed decision as to whether or not I wanted to try the BETA BIOS. I was under the impression (mistakenly) that it simply addressed the USB DVD issue. I'll wait for the new release BIOS. I can live without the external USB DVD being plugged in at boot. Bricking my MOBO and having to RMA would be a far less desirable outcome. :p That said.. I'd still recommend this MOBO. It has relatively few issues and MSI support is responsive so far.

Sun Ray - How to get external USB Card Reader working

Dear All,
i have the following problem. Maybe someone could help me or give me a clue to solve it.
SunRay Software 5 installed
Window 2003 R2 TerminalServer
Here my question:
I use a kiosk session with a smart card to conncet to the windows server - works perfect.
Login Screen and go.
Now i have to have to authenticate myself with an external usb card reader and smart
card (connected to the sun ray) to use a certain application on my win2003 server.
Via the windows rdp session (from the laptops) everthing is ok. The information from
the card reader is transferred to the server.
If i use the Sun Ray nothing happens. So here is my problem:
How do get the authentication information from the smart card to the server?
Thanks in advance
Best regards
Hans-Peter

Basically, reinstall the Boot Camp video drivers manually and if that doesn't work then go to the AMD/Radeon website and install the Windows drivers directly for your video card model.
If you want to do a search you will find others that have pretty good luck doing it either way.

Problems Installing Win7 using External, USB DVD Drive

I have a mid 2010 15" i7 MBP which I upgraded to from 4GB to 8GB RAM courtesy of OWC. I recently upgraded the 500GB 7200RPM HD with a 240GB OCZ Vertex 3 and using an OWC Data Doubler, I replaced the DVD SuperDrive with the 500GB Hard Drive.
I used an External USB DVD Drive to install OS X SL On the SSD without issues. Also, I got all my updates and software installed and working without any problems.
I've been running great for about 2 weeks now, so I decided to install Windows 7 64bit Ultimate. I ran Boot Camp Assistant and partitioned the 240GB SSD in half 120/120. Everything went fine with creating the partition. I selected to Install from the Win 7 DVD media in the USB DVD drive and rebooted. I got a grey screen. I turned the computer off and turned it back on. Holding down Option, I selected the Install DVD from the Boot Menu. I then got a screen with the Apple Logo flashing intermittently with a Circle/Cross Hatch. So I can't get the Windows Install to start to save my life. I know the External, USB DVD works since I used it to install OS X and I have no problems using it in OS X. I Know the media works because I tried a test install, without activation in a VMWare Fusion VM.
Any suggestions are appreciated?

So here is the answer. The Firmware on the MacBook Pro only supports installation of OS X from External Media and will not install operating systems from 3rd Parties. I tried to install Windows XP, Win7 Ultimate 32 & 64bit, and Ubuntu 11.04 but no success.
Supposedly, the MacBook Air does support installation of 3rd party operating systems from external media, but I have no way to confirm this.
I ended up reinstalling the internal DVD drive installing Win 7 and Ubuntu on the SSD. Using rEFI, I'm able to triple boot all 3 operating systems. Then removed the drive again and reinstalled the 2nd HD. Everything seems to be working fine.
I'm looking for someone who has experience in Mac EFI Hacking to see if there is a way to enable booting 3rd Party OSes from external media. I'm guessing someone could examine the MBA firmware and figure out how to hack that capability into the MBP.

My laptop won't boot form external USB DVD drive

Hi, I have HP pavillion dv6748us. My internal dvd drive is not recognized, cannot access and not listed in device manager & window explorer. I need to reboot from the external dvd but don't see the option listed in BIOS. Below is the sequence listed in my BIOS. I have recovery disk and would like to know if and how to add external USB DVD DRIVE into to BIOS.
Your help is greatly appreicated!
(1) ATAPI CD/DVD ROM DRIVE
(2) USB HARD DRIVE
(3) NOTEBOOK HARD DRIVE
(4) USB DISKETTE ON KEY
(5) USB FLOPPY
(6) NETWORK ADAPTOR

Have you tried 2? The BIOS may see the DVD drive as a mass storage device and not distinguish between a hard drive and an optical drive.

Can I install a retail os10.5.6 from an external usb dvd drive?

Since the internal dvd combo drive does not read double layer dvd, I tried to install the new version from an external usb dvd. The installation starts but when I have to restart the computer goes back to the first screen.

Apple does not require any particular type of dvd Just says "an external dvd"
What document are you referring to? The fact that you can read/write with a particular DVD drive does not necessarily mean you can boot from it.
If you have another Mac available, you can probably "borrow" its DVD drive for your OS installation by using FireWire Target Disk mode.

HP external USB DVD Drive not recognized by computer.

Have HP Mini-210 and HP external USB DVD Drive. When attached, the DVD drive lights and spins but computor will not recognize it. When checking Device Manager, it says no driver for DVD drive.. I try to reinstall the driver, and then it says I have the best one already. Device Manager continues to indicate that this drive has a problem. Tried to download a driver from HP support and it was not available on line.
Copied install disk that came with drive thru dropbox cloud to move it onto the computor. Was able to install the programs but still have no driver and unable to use DVD drive.

Try this wayne
http://support.microsoft.com/default.aspx/kb/929461/en-us

USB 3.0 - WD Passport 1 GB not recognized by Windows 8 and 8.1

My USB 3.0 - WD Passport 1 GB not recognized by Windows 8 and 8.1. There is no sound when I plug it on pc or some error message. But other USB devices works well. Maybe there is not suitable drivers for this device? Please Help me!

Hi azeripatriot,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers.
For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that when you connect your passport drive it does not auto install. Does the power light on the passport drive come on? What is the error message you receive?
Have you checked for any Windows updates?
You can run The HP Support Assistant to help with resolving issues and looking for updates.
If you believe it is a driver issue, you can download the software and drivers from the WD website. Here is the link WD download for passport drives. If you connect it to a different computer, does it install? They also have a diagnostic tool for testing the drives. Here is a link to their diagnostic tool .Western Digital Data Lifeguard diagnostics for Windows.
If this has not alleviated the issue, would you please provide your exact model of computer and the operating system you are running. How Do I Find My Model Number or Product Number?
Would you also provide the exact error you get when connecting the passport.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.

I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.
Here is the information I have. The external hard drive is a 120GB Acomdata. It has both USB and Firewire. When I go to plug in to the mac mini through USB, it is not being recognized. When I switch to Firewire on the old computer I can see it, however when I go to USB it is not being recognized (even on the old computer).
I'm at a loss as to what to do. Any advice would be helpful.

Shalese wrote:
Have you ever tried the FW 400 to 800 adapter?
I have used them on multiple occasions and they work just fine.
Try this (maybe you already have):
-Boot Mini with drive disconnected.
-Do not connect drive but turn it on
-wait a few seconds for drive to spin up
-plug cable into the Mini then into drive.
This is an old drive and may have some timing
issues.
I had an Acomdata drive a long time ago. It
worked fine with FW but USB was flakey.

CD Drive or DVD drive is missing or is not recognized by Windows or other programs - this happens any time I upgrade itunes

I just upgraded to the new version of itunes for my ipod touch. My CD Drive or DVD drive is missing or is not recognized by Windows or other programs occurs and it does not show up listed as part of my computer. How can I fix this?

Your DVD drive? Why would this be missing after a iTunes download?

I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro! Anyone have a suggestion??

I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro! Anyone have a suggestion??

Zap the PRAM and Reset the SMC, then try again. If the problem remains, update to 10.6.8 and repeat.

External dvd reader/burner doesn't show in Finder

Hi and thanks in advance for your help -
I've just purchased an external dvd burner because the pre-super drive dvd reader in my macbook is getting a little tires. It doesn't appear in the finder, but when I check with the System Profiler or Disk Utility application, it is listed there. It's a no-brand dvd burner (from the Fnac chain in France) which appears as a "Slimtype DVD A DS8A3S", am I missing something here?
Thanks

That was the next question I was going to ask.
If your external DVD player has its own power supply, you should definitely use it. If it came with 2 USB cables, it's in your best interest to use both of them with DVD player. One will be responsible for transferring data from the DVD player to the computer, along with supplying some power. The second cable will provide the rest of the power for the drive
~Lyssa

Logitech external USB DVD reader/burner model LDR-PMD8U2LBK not recognized.

Similar Messages

Maybe you are looking for