Logitech G-series mouse don't work!

Logitech G-series mouse don't work in express solaris 11 but work fine in solaris 10 or opensolaris 2009.6, why so?

Connect Logitech G5 through external usb hub.

Similar Messages

Help: Keyboard & mouse don't work in Welcome screen after Linux 6.3 instal

I installed Oracle Linux 6.3 on a Intel X64 quad core machine. Everything seemed to go well, but after the installation completed and I rebooted, the keyboard and mouse don't work anymore.
I don't have a clue how to proceed.

Is this a Laptop or Desktop PC system? Perhaps your system is not compatible. Can you access the Linux Grub boot menu at startup?

The back and forward buttons on Logitech mouse don't work

My logitech performance MX back and forward buttons don't work. I tried in safe mode and they still don't work. I tried creating a custom shortcut in logitech setpoint and that didn't work either. I tried using the native mouse driver and not logitech. No luck.
I really like this functionality. Is there a way to enable these buttons?

Hi mike,
i'm not sure if this will help but how about this add-on called "Vimperator". It is easy to use and works like vim. (Try this as an alternate till we figure out the problem) :)
Hope that helped.

Keyboard and mouse don't work at all in 1 on 2 times!

When my computer has already been started up once and I start it up again, then the PS2 keyboard and mouse will not work, but only 1 on 2 times precisely! So one time the keyboard and mouse are working, the other time keyboard and mouse are not working. The rest works fine. Quite mysterious isn't it? Who has a solution to this?
If the power has been totally off and I put it back on again, then keyboard and mouse work properly.
I have looked into the BIOS, Integrated Peripherals for something like PS/2, I couldn't find it, I have put out several things in the BIOS, but it didn't work.
Now follows a list of everything I see when I am into the BIOS with the standard settings for integrated peripherals.
Could it help to put items on and off here?
Onboard device ->
raid config
on chip usb [v1.1+v2.0]
usb/storage support.....enabled
usb mouse support......enabled
sata 1/sata 2...............enabled
sata 3/sata 4...............disabled
ac97 audio.................disabled
mac lan (nvidia).........auto
via on board 1394......enabled
On board i/o chip setup ->
onboard fdc controller.......enabled
onboard serial port 1.........3F8/irq 4
ir function select................disabled
onboard parallel port.........378/irq 7
parallel portmode..............ecp+epp
epp mode select.................epp 1.7
ecp mode use dma..............3
I couldn't find a possibility for a hardware reset in the BIOS. It should be in PnP/PCI. Does anybody know about these things?
Computer:
AMD Athlon 64 3200+, MSI K8N Neo Platinum, nVidia FX-5200 128Mb, Aopen H600B, MS keyboard, Optical muis, Windows XP Home.

Quote from: Svenomous on 25-September-06, 23:08:26
Have you tried using a usb keyboard/mouse?
I don't use any usb, only use PS2. Maybe it is possible to use some sort of a PS2 to usb converter, but I would rather like the PS2 to work.

My mouse don't work...

Hi,
I'm french so I hope you'll excuse my english...:-)
I have a problem with my mouse. It's an apple optical mouse. Sometimes, she don't work, she block and I can't move it. Sometime's, it works. It's plugged on my keyboard by USB.
I have change my mouse, same problem. I have change my keyboard, same problem. I have tried all USB ports, same problem. I think it is not a mouse problem, but a driver or something like that problem, because it's wrote "optical mouse" in the system profiler, in "USB". Can you help me ?
Thank you...

It would probably be worth your time to install the 10.5.8 combo updater again.
But before you do so, have you tried a bit of maintenance?
Repairing permissions is important, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two in Tiger, but much longer in Leopard.
Background information here:
http://docs.info.apple.com/article.html?artnum=25751
and here:
http://docs.info.apple.com/article.html?artnum=302672
An article on troubleshooting Permissions can be found here:
http://support.apple.com/kb/HT2963
By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
http://support.apple.com/kb/TS1448?viewlocale=en_US
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.

Lion's page-turning gestures on the magic mouse don't work in the App Store

Hi.
Does anyone know why Lion's swipe gestures for moving forwards and backwards through pages don't work in the App Store? I have the Lion OS and use a magic mouse in conjunction with MagicPrefs, stored in the System Preferences, and the gestures work with every app except the App Store.
Thanks.

I'm not familiar with the Magic Mouse, so I don't know how the gestures are different from those on a trackpad. However, on a trackpad, you can use a two-finger left or right swipe to scroll horizontally, which - in Safari only - will also go forward or backward between pages. There is also a three-finger swipe that more properly goes forward or backward in any app that supports that, including the App Store, iTunes, etc. You'll want to use that gesture instead.

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

G5 wont boot past white screen,or if it does keyboard&mouse don't work

Before it had this mega crash it had been having trouble starting up - the fan was making jet engine noises and taking forever for it to get to my desktop. It then proceeded to crash a few times during the week when using Illustrator. Then last week it went kaput. The mouse would jump across the screen then freeze,so had to use power button to switch off.Unfortunately our I.T manager has no clue with macs, it just so happens she installed some RAM the weekend before, or could this be a coincidence?The RAM was removed to see if was corrupt but this made no difference to start up.
Anyway I've tried starting up from the original disk, leopard disk and holding down all the keys people have suggested on start up. it gets as far as the white screen then the no entry symbol appears. When I try without any disk it gets to my desktop, but the keyboard&mouse do not work.
If there are any suggestions I would be grateful for your help. Otherwise I guess it's sending it off to a repair place?

With the Install Disc in the drive "Try Disk Utility
1. Insert the Tiger Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
If it still panics, disconnect the HD again & see if it boots offth Install Disc.
Does it boot into Open Firmware with CMDOption+of ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)

Logitech M305 wireless mouse suddenly not working

I've been using this mouse since I bought my MacBook Pro and suddenly my Mac doesn't even recognize it. I tried downloading the Logitech app that lets you configure the mouse too and it sees it, but still no response when I move or click the mouse. I just replaced the battery on the mouse and tried switching USB ports for the sensor....no dice. I'm wondering if the recent security update messed it up??

I was also inquiring about this problem.
I currently use a Logitech Mx510 Optical Mouse and its side "back" and "foward" buttons are also rejected by Safari.
*This problem occurs both on my Windows XP Pro and Windows Vista Ultimate
- My current rig for both computers are.
- Asus P5B Deluxe
- Intel E6600
- 2 GB 667 Corsair
- 160 GB SATA II
- Geforce 8800 GTX 640 MB.
*Both OS's are up to date on all service packs*
Custom. Windows XP Pro Asus P5B Deluxe. Intel E6600. Geforce 8800 GTX 640 MB. 2 GB Corsair 667.

Keyboard and Mouse don't work after upgrade

Hi, about one week ago, i've made a system wide upgrade and after reboot my keyboard and mouse stopped working. My hard disk is encrypted and without keyboard i remain at the prompt which asks my password to unlock the encrypted partitions. So i don't even arrive to login manager. I tried all the solutions i could find but none of them worked for me. I saw similar posts on the forum and i'm sorry if i'm posting it in wrong place.
Here is my Xorg.0.log file, it seems like because of hotplugging, xorg disables mouse and keyboard but i couldn't disable hotplugging with the given methods like adding flag to the /etc/X11/xorg.conf file:
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
I 've installed/deleted xf86-input-keyboard/mouse and reinstalled xf86-input-evdev etc and it didn't work.
I tried to downgrade to different versions of kernel, i didn't work.
There are "00-keyboard.conf" "10-evdev.conf" "10-quirks.conf" "50-synaptics.conf" files under /etc/X11/xorg.conf.d
So i don't know what to do else, i hope someone can help me.

ewaller wrote:
When you boot to the Ubuntu system, before you chroot, look at the output of lsmod and note the modules in use. In particular, I am interested in modules that contain 'lpc', So try lsmod | grep lpc
lpc_ich 21163 0
Post the module names that that finds here. Also, look in your initrd for modules for the LPC bus driver. It does not exist in mine.
./usr/lib/modules
./usr/lib/modules/3.15.8-1-ARCH
./usr/lib/modules/3.15.8-1-ARCH/modules.alias.bin
./usr/lib/modules/3.15.8-1-ARCH/modules.builtin.bin
./usr/lib/modules/3.15.8-1-ARCH/modules.devname
./usr/lib/modules/3.15.8-1-ARCH/modules.dep.bin
./usr/lib/modules/3.15.8-1-ARCH/kernel
./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-aes.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd256.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/tcrypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/aes-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/af_alg.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-sha.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/authenc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ctr.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sr_mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256-ssse3.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/glue_helper.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/md4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rng-core.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_raid6_recov.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_tx.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serio.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/seqiv.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64-3way.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp-crypto.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_user.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-region-hash.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_null.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ansi_cprng.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/hmac.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/deflate.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cdrom.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cmac.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rsa.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-storage.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/i8042.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xts.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/scsi_mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/seed.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-hcd.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_skcipher.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/public_key.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xor.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/zlib.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc-t10dif.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/authencesn.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/mbcache.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/vmac.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sd_mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_pq.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/mpi.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usbcore.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-crypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-pci.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-log.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ecb.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6_pq.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc16.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_hash.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-sse2-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-snapshot.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ccm.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd128.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xhci-hcd.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4_compress.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6test.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/oid_registry.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512-ssse3.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd160.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/gf128mul.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/gcm.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cts.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xcbc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_xor.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mirror.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/x509_key_parser.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/asn1_decoder.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif-pclmul.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/aesni-intel.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usbhid.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lrw.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ext4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-bufio.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/arc4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/michael_mic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/libahci.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/uas.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/jbd2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/tea.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c-intel.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1-ssse3.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/pcrypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/hid.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/fcrypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/des_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/libps2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/pcbc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/tgr192.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cbc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ablk_helper.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/asymmetric_keys.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd320.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/anubis.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/khazad.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/libata.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-clmulni-intel.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_memcpy.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ahci.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/wp512.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc_compress.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32-pclmul.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/atkbd.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/md5.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cryptd.ko
./usr/lib/modules/3.15.8-1-ARCH/modules.symbols.bin
But, my keyboard and touchpad don't exist in the ISA bus address space. Things that used to live on the 1980's vintage ISA bus (like serial UARTS and ancient keyboard controllers) are now serviced by the serial LPC bus. I think you don't have that driver available in the initrd preboot environment
Sorry, i'm not good at these things, so which driver i should install if it's the case? (By the way, i added atkbd to the MODULES= and "earlymodules=atkbd modules-load=atkbd" to the kernel parameters, but i didn't make any change.)
Pse wrote:
Note that you shouldn't do this as a permanent solution, but just to get through the bootloader issue for now, manually edit /boot/grub/grub.cfg and change the relevant lines to point to the LTS kernel (in other words, grub-mkconfig should NOT fail, but that's not your biggest problem right now). This way the entry that pointed to the common kernel should now point to the LTS one.
You can find the LTS kernel files in /boot; the names should give them away. Remember to change both the kernel and initrd lines in grub.cfg.
In fact, i also have done as you told(by changing lines to the lts) and read about the error that grub-mkconfig gives me. It says it's ok, error is not important it should work properly. So i have some problem with my bootloader. I can't see the boot option anyway. Problem must be about UEFI because i remember that i had booting problems also when i first installed arch to my computer. I see all lts and lts.img files under /boot directory but somehow don't see as boot option.
Anyway, thanks a lot for all your help, maybe i do something wrong, i can't solve the problen. I'm going to reinstall my system, because i don't have time anymore. I hope at least this post would be useful for somebody else.

Keyboard and mouse don't work. (mighty mouse, wired)

I've been using my new intel iMac for a couple of months now with no problems at all, but last night I installed Security Update 2006-007 and then restarted my computer. Now, the keyboard and mouse just refuse to work. The mouse pointer stays in the right-hand corner and the caps-lock key on the keyboard won't light up. I tried unplugging them and plugging them back in again... nothing. I haven't got another usb keyboard or mouse so I tried booting the install CD, and everything worked fine then, so I'm guessing the update did something to Mac OS X that it didn't agree with?
Anyone know how I could possibly fix this? Thanks in advance :]
iMac Mac OS X (10.4.8)

Try starting in Safe Boot mode - it does take a lot longer to start so be patient
What is Safe Boot, Safe Mode.pdf
http://docs.info.apple.com/article.html?artnum=107392
Mac OS X_ Starting up in Safe Mode.pdf
http://docs.info.apple.com/article.html?artnum=107393
if it is OK do a normal Restart
chris

MSI NEO4 Platinum - Upgrade to bios 1.5 - ps2 mouse connector don't work

I've upgraded just today the bios of my NEO4 to the ver. 1.5. At reboot, i've set all bios parameters like they were before upgrade; now the mouse, if connected to the ps2 with an adaptor for usb mouse, don't work at all. Previously it was connected in the same way and the system was running with ver. 1.1 bios.

Have you tried just connecting the mouse to the USB port? Tried all ports? Tried a regular PS2 mouse just to test?
Did you look for any new settings that may have been added since the1.1 BIOS, Did you take notes?
Did you look for any hidden BIOS features?
Perhaps the settings you used previously just don't work the same way or may behave differently (perhaps like they are supposed to)
Maybe a setting you didn't consider before is now necessary since the upgrade.
Nothing is ever black and white with this stuff, my point is, leave no stone unturned...that should keep you busy in the interim until someone likely comes up with a better solution or suggestion.

KVM switch w/ usb i/o for keyboard mouse doesn't work [Solved]

Edit:
This problem appears to have magically disapeared. I'm still not sure why it happened or why it has ceased.
Hello Everybody,
I'm not sure why this is happening, but I've got a KVM switch that used to get "automagically" detected as "a no-brand KVM switch" on boot-up that has ceased working. I don't get this "no brand KVM switch" detected on boot-up anymore, but I can use the VGA part of the switch, at least, however the keyboard and mouse don't work unless plugged directly into the computer.
Below I've attached the result of
dmesg | grep --context=3 usb
dmesg | grep kvm
returns no result.
The most signifcant thing seems to be:
usb 1-2: new full speed USB device using uhci_hcd and address 7
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 8
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 9
usb 1-2: device not accepting address 9, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 10
usb 1-2: device not accepting address 10, error -71
hub 1-0:1.0: unable to enumerate USB device on port 2
I've googled this, and somewhere it was suggested this mean the usb device is not drawing power. The only thing that has happened that I can imagine as being the culprit between function/dysfunction here is that there was a power outage (circuit breaker tripped), and though my computers were on battery-backup, the monitor is not. I don't suppose that this could have messed up the switch?
Note this problem is uniform across 3 computers, 2 which have recently run a system update, but the 3rd has not recently run an update, this is not an Xorg problem, "K and M" don't work in either console or X.
Any help would be appreciated. Below as, mentioned previously, is the output of
dmesg | grep --context=3 usb
included on the off-chance that someone sees something significant there.
ata1.00: configured for UDMA/100
ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4480B, GW02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA WDC WD400EB-11CP 06.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4480B GW02 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
huhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: device descriptor read/64, error -71
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa7fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 4
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 5
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
usb 1-2: device not accepting address 5, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 6
usb 1-2: device not accepting address 6, error -71
hub 1-0:1.0: unable to enumerate USB device on port 2
usb 3-2: new low speed USB device using uhci_hcd and address 2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e100 0000:01:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xff8fe000, irq 20, MAC addr 00:07:e9:50:88:58
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
usb 3-2: configuration #1 chosen from 1 choice
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
usbcore: registered new interface driver hiddev
input: Logitech USB Optical Mouse as /class/input/input2
input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
intel8x0_measure_ac97_clock: measured 50831 usecs
intel8x0: clocking to 48000
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
reserve_memtype failed 0xf0000000-0xf8000000, track write-combining, req write-combining
X:2394 freeing invalid memtype f0000000-f8000000
X:2367 conflicting memory types f0000000-f8000000 write-combining<->uncached-minus
reserve_memtype failed 0xf0000000-0xf8000000, track write-combining, req write-combining
X:2395 freeing invalid memtype f0000000-f8000000
usb 1-2: new full speed USB device using uhci_hcd and address 7
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 8
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 9
usb 1-2: device not accepting address 9, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 10
usb 1-2: device not accepting address 10, error -71
hub 1-0:1.0: unable to enumerate USB device on port 2
Thanks again!
Last edited by pseudonomous (2008-12-30 23:57:47)

i'm sorry, but this is all software related then. if you haven't already, run disk utility a few times to try to correct the error. otherwise, you should back up your info immediately if you can. if you can access another mac you can do that with firewire target disk mode. http://docs.info.apple.com/article.html?artnum=58583. the other mac has to have built-in firewire. then you can try to repair the directory with a third party utility like diskwarrior or techtool pro. if it cannot solve the problem, or if you do not want to spend the money on the software, you have no choice but to erase and install your operating system. do you already have your info backed up?? it's always a good idea. keep us posted as to how it's going for you or if you have any further questions. [ 8 ) ]

Forward and Back Buttons Don't Work

Greetings,
My forward and back buttons on the mouse don't work in PSE 7. Instead I always have to click the forward or back buttons on the toolbar, or use keyboard shortcuts (alt+left arrow or alt+right arrow).
Does anyone else have the same problem?
Thanks,
Shane.
Photoshop Elements 7
Windows Vista Home Premium SP2

This is working for me. The forward and backward buttons on the toolbar would work only with pressing of Alt button i.e. Alt+Left arrow.
Suppose you are in Single image view, and press left and right arrow keys, application would switch to previous and next photo respectively.
Please let me know if you have other concern.
~Sourabh

Logitech mouse buttons not working in photoshop cc 2014

logitech mouse buttons not working in photoshop cc 2014 winds 8.1. Is this a common problem?
I have updated the latest drivers and have a few buttons programmed with keyboard shortcuts that used to work in previous versions of Photoshop but don't work now.
Scrolling with mouse in bridge stopped working in cc butI see it is now working.
any ideas?

Many Photoshop extensions are not compatible with Photoshop CC 2014 for Adobe removed support for Flash Panels in CC 2014. Many extensions panels are flash based. Check with the developer to see if their blendmein extension works with CC 2014.
Adobe does not maintain Photoshop so it backward compatible with prior versions of Photoshop. This brakes things like action scripts plugins extensions etc. Keep old version of Photoshop installed....

Logitech G-series mouse don't work!

Similar Messages

Maybe you are looking for