Logitech headphones will not work in USB port?

I have a headset in the mic port which works ok, but I am trying to upgrade to a Logitech headset which plugs into a USB port and I cannot get it to work.
Am I expecting the impossible? Do mics only work in the little round mic jack?

I have the same issues, headset worked fine up until 2 days ago when it just stopped working which was after I did the latest update on my mac. I bought a new headset today and this doesn't work either, the headset doesnt show up under system pref / sound at all.
Message was edited by: nybraby

Similar Messages

S4 will not work with Aux port?

Headphone jack works on S4 but will not work connected to aux port in my car. Other devices work connected to it.

windyhill28 We want you to have a fully functioning device. Are you using the cable that came with the phone? Have you tried tried different cables?
Sheritah_vzw
Follow us on Twitter
@VZWSupport

I just downloaded Windows 10 and now my headphone will not work, the other caller can't hear me.

I just downloaded Windows 10 and now my headphones are not working and the other caller
can not hear me.

Please download and install the driver from the following weblink:
http://ftp.hp.com/pub/softpaq/sp50001-50500/sp50498.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

HT5482 My headphones will not work on my Iphone4.. I put them n good and have tried several pair's..aaauuuggggjhh

My earbuds will not work. Used several pair make sure it's not the earbuds.

sounds like the headset connector in the phone is damanged then

Audio not working. USB ports not working.

My display worked perfectly for a few months. It started when the audio stopped working. The option to use the display audio disappeared from the settings. I made due. Then the monitor started not waking up when I would hit keys on my wireless keyboard. I had to open my macbook pro first, wake it, then the monitor would turn on...then I could shut my macbook. Now the USB ports are not working. This is very frustrating as I have searched the forums..tried everything there and have had zero success. Should I just return this to the store? Please advise. I am tired of dealing with this as the features that are not working are the REASON that I shelled out a grand for this monitor.

As much as I loved the display itself and design of the Thunderbolt (problems asside), I did take mine back to Apple. It was not just the one issue but several which all added up. Having said that I wouldn't give up on it as I'm now missing it compared to my 17" screen on the MacBook Pro which suddenly appears to be puny in size.
Towards the latter part of owning the TB Display, I had a temporary work around which was to utilise the three USB ports on the MacBook which I experienced as being problem free; therefore I plugged a USB Hub into one of the MacBook Pro's USB ports effectively giving me several to use for lesser equipment, then the remaining two USB's on the MacBook Pro I used for more critical higher bandwidth devices like the Bose Companion 5. Then less critical devices OR devices that don't seem to have any problems with the TB Display - I then plugged into the back of the Thundebolt Display. I know you shouldn't have to do this but for the time it seems to help.
Also with regard to another problem I had with sound, see my other post (link below - 5th post down) where I was able to avoid another problem for the time up until I took it back, but this might not have been a permanent solution and I am no longer able to tell for sure.
https://discussions.apple.com/message/17708526#17708526

IPod touch will not work with USB 2.0 PCI Card?

I have a dual processor PowerMac G4 that has USB 2.0 via a PCI card. When I plug in the iPod nothing at all happens. I haven't read anything about PCI cards not being compatible with the touch. Is anyone else having this problem?

Just thought I'd add my 2 cents...I've got the same problem...I've had a Keyspan USB 2.0 5 port card in my Dual MDD G4 for years and it's worked fine. Well, until a few days ago when I tried updating some stuff on our iPods. It would initially start working then lose connection. Now nothing at all with 5 iPods. It won't even show up on the desktop under Disk Mode. I did the same and it works fine under the old stock USB 1.0 but slooooooowwww. Is this yet another problem with Leopard? I've searched the Keyspan site and they don't have any updated drivers. Guess I'll look for a Belkin as well...ugh!!! Leopard is horrible! First no printer drivers, then no iSub support, now this!

IPOD WILL NOT WORK VIA USB WITH MY HOME TEATHRE

When I plug my iPod to my stereo via USB that came with iPod, stereo says no USB device connected and then after few seconds, it starts playing, although, iPod displays same screen as when synching with the Do Not Disconnect logo and cannot stop it from playing and when I disconnect it, I can't turn it off. This also happens occasionally, that I cannot turn it off.
Any help would be appreciate it.
You can also contact me at carlos_brewer (at) yahoo (dot) com

Darkmonster620 wrote:
It says it'll work with "all" iPods...
When was the manual written? What constituted "all iPods" one year would not necessarily apply to iPods made later.
Throw away my iPod and get a new one?
I don't believe I suggested anything like that.
You might get better answers if you included the exact make and model of the home theatre system. You should also search the forums using the "Search Discussions" box to see if there are any other threads about your particular brand of home theatre. Also, did you ever check the support site or contact customer support for the home theatre and car stereo?
Best of luck.

In the middle of restoring my iphone 3Gs in itunes, some kind of error occurred and now my iPhone is stuck on just the factory setting of "connect to itunes" screen. Now my computer will not recognize the usb port. I tried other computers. What can i do?

I really need help, i had just finished activating my iphone, and now im loosing money because i cannot use it.

What was the error number? That would be very useful since the following gives actions for various errors.
http://support.apple.com/kb/TS3694
Try manually placing the iPod in recovery mode to see if that will make the iPod visible in iTunes. See:
http://support.apple.com/kb/HT1808

I updated software upgrade from itunes. now phone will not work at all. only have picture of apple icon and usb on screen

i downloaded an upgrade from itunes last night to os5.1 i think. it said there was a problem with the download. now my phone will not work at all. it just has a picture of the itunes logo ans a picture of a usb cable on it. my computer will not recognise phone either

http://support.apple.com/kb/TS1538
Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable.

I purchased a new vehicle with a USP port but my nano model A199 will not work, only works with the aux plug which will not allow me to view the songs on the vehicle touchscreen. Is there a download I can get to put into this nano?

I purchased a new vehicle and the older ipod nano I have will not work through the USP port, only works through the aux plug. Is there a download i can get toput into the nano that will then allow me to use the USP port instead of the aux port?

Check with your dealer and see if there is a special cable available for connecting your iPod. It should have a dock connector on one end and USB and miniplug on the other.

Satellite M50D-A : USB 3.0 devices not working in USB 3.0 ports

I can use 2.0 devices in the 3.0 ports fine, but my 3.0 device Flash Voyager USB3 8GB will not work. It connects then disconnects once, not showing up in device manager at all.
I've tried installing the USB driver off this site version 2.0.10.273-130101a for my model. That made no difference.
Install system Windows 8.1
Any ideas? Thanks.

The Voyager USB stick is manufactured by Corsair
I found in Corsair forum some threads and complaints about the troubles connecting the Voyager USB3.0 stick to USB 3.0 ports. Here the link the Corsair threads:
http://forum.corsair.com/v3/showthread.php?t=115891
http://forum.corsair.com/v3/showthread.php?t=111945
It looks like there are some compatibility problems between the USB controller (from AMD but _not_ Intel) and this USB stick.
One of the solutions could be the usage of other USB 3.0 flash memory sticks which are supported by AMD chipset.
You could also try to update the driver manually. You will need to check firstly the chipsets specs and name. To do that, I recommend you to install some kind of hardware diagnostic software (Everest Home Edit or Sandra Sisoft).
Then you could check on AMD page if an update for this chipset is available.

I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

HT4367 I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

Ipad will not work with headphones of any description

Hey, just bought myself a new iPad 32g WiFi. I'm really disappointed to discover I can't get any earphones to work with it at all - even my iPhone 4 and my old iPhone 3 Apple earphone will not work. I've tried a generic brand - they won't even fit properly. The speakers on the Ipad are not loud enough to listen to a movie or anything anywhere there's the least bit of background noise. What's the answer please? I've done an internet search where everyone says push them in harder - I cant push them in any harder without damaging them! Please help!

SOLUTION: Headphones don't work on iPad
I had the same problem: suddenly my headphones didn't work on my iPad. All the headphones (3 pairs) worked on my iPhone, so I knew the problem wasn’t with the headphones. The sound worked fine from the iPad speakers, so when I unplugged the headphones, the sound returned. I called AppleCare Support and tried everything they suggested, including restoring it to the factory settings. Nothing worked, and they authorized a replacement iPad.
The new iPad arrived, but it had the same problem, so I knew something had changed in the iPad's programming. I went online and found that many others were having the same problem, but no one offered a solution. However, someone mentioned that the problem first occurred after installing the latest OS (4.3.3), which is when my iPad’s problem occurred. Next, someone else wanted to know if there was a mute switch that needed to be turned off. This started me thinking...
To make a long story as short as possible, I played around with the controls on my old iPad and discovered the following: Apparently, the latest OS has added a safety feature to protect our eardrums (that’s nice, but it would be even nicer to have been notified of this change .. even the support technicians were unaware of it). Previously, when you listened to the audio through the iPad’s speakers, the sound was so low that you had to turn the volume up as high as possible to hear it. Then when you plugged in the headphones, the sound blasted your eardrums as you frantically lowered the volume.
(PROBLEM:)
Now, however, WHEN YOU PLUG IN THE HEADPHONES, THE IPAD AUTOMATICALLY MUTES THE SOUND. When you unplug the headphones, the sound is automatically restored through the speakers, giving you the false impression that there is something wrong with the headphones or the headphone jack.
(SOLUTION:)
So after plugging in the headphones, you have to use the volume button to bring the sound back up to the desired level. When you press the volume button, it will say “headphones” on the display to let you know that you are adjusting the sound for the headphones only. The speaker volume retains its previous setting (maximum volume).
So, the solution is quite simple… just turn up the volume after you attach the headphones.
Cheers!
Becky Bear

Logitech headphones will not work in USB port?

Similar Messages

Maybe you are looking for