Logitech headset Skype and Mac Mini Intel

Hi,
I own a Powerbook G4 and a new Mac Mini Intel Duo Core.
Both machines run the same latest OSX version 10.4.6.
On the Mac Mini I have a problem using Skype with my Logitech Headset 350 (usb). The system does recognize the headset, but for some reason the microphone of the headset is not working. The speakers work fine. I did set the prefrences right in the Skype menu.
But on my Powerbook G4 the headset works perfectly fine.
Could this be an Intel issue? Maybe I a driver (can't find one on the Logitech site)? Anyone any clue?
Thanks, Fred
Mac Mini Intel Core Duo 1.66   Mac OS X (10.4.6)   1280 MB ram

On the Mac Mini I have a problem using Skype with my
Logitech Headset 350 (usb). The system does recognize
the headset, but for some reason the microphone of
the headset is not working. The speakers work fine. I
did set the prefrences right in the Skype menu.
I have the same headset and it works fine. First, directly connect it to your mini, don't use the keyboard's USB hub since it can only drive 100mA devices. Second, check that the mic is actually on (the blue LED is constantly on, not flashing).
If it still doesn't work go to System Preferences->Sound->Input then select the "USB Headset" and speak into the mic and watch the input level meter. If necessary adjust the "Input Volume".
Mac Mini   Mac OS X (10.4.6)   Core Duo / 2GB

Similar Messages

  • Hitachi PJ-TX300 projector and Mac Mini Intel Core 2 Duo?

    My PJ-TX300 projector is hooked up via its PC connector to my Mac Mini Intel Core 2 Duo, via a DVI to VGA adapter (which came with the Mini from Apple) plugged into the Mac mini. I cannot get a clear screen picture at any resolution: there is always ghosting. Can you advise me?

    Ghosting would typically implicate the video cable. Where did you get it? It sounds like you may have a very cheaply constructed VGA cable and a better one is needed.

  • Mac mini intel 2 versions 128mb and 256mb graphics in windows ????

    Okay I have 2 mac mini intels core solo's and with the same ram 1gb installed and the same windows xp sp1 version etc etc. the one has 256mb video ram and the other has 128mb video ram ????
    The 128mb one has a stamp hp42 and a sticker on the motherboard stating locked something ??? tiger = 10.4.5 install dvd
    The one with 256mb has hp22 stamp and no sticker but also came with the orriginal tiger for intel 10.4.3 ?? so likely is a older model ????
    Does anyone have a clue about this ????

    and the same windows xp sp1 version.
    I didn't think you could load SP1 onto a intel Mac, how did you get it work? Are you using boot Camp?
    No idea about the stickers as I didn't disassemble my mini. Can I ask you you decided to take the computers apart?

  • Mac mini Intel Core Duo fan very loud and runs at high speed all the time.

    I purchased an "Open box" Mac mini Intel Core Duo, 1.66Ghz, 2G ram, 80G HD and SD a few days ago from Fry's.
    It runs beautifully except the fan is very loud compared to any Mac my family has ever had. It is so loud that we were thinking of putting it under the desk.
    The fan runs constantly, and I mean all the time, at a high speed. You can really feel the air coming out the exhaust vents. The case is always cool to the touch as is the exhaust air.
    My aunt bought a similar Mac mini (But only 512Mb ram) the same day. Her's is very quiet. The case feels just slightly warm, not unlike other Mac mini's I've seen.
    Should my Mac mini's fan be running this way?
    Thanks,
    llulua
    BTW: The "open box" was sealed with a Fry's label and it said that this had a new warranty. Yet, checking the serial number, it said that it had about 260 days left. I guess Fry's is backing it?
    Also, someone told me that perhaps the main wire from the fan to the logic board is disconnected.
    eMac 1Ghz, iBook 500 dual usb, Mac mini 1.66Ghz Intel Core Duo 2g ram   Mac OS X (10.4.8)  
    eMac 1Ghz, iBook 500 dual usb, Mac mini 1.66Ghz Intel Core Duo 2g ram   Mac OS X (10.4.8)  

    Since you have 2 gigs of memory, my thoughts are that when the party (Fry's or the origianl purchaser) upgraded the memory, they neglected to reattach the wire at the front of the Mini under the IR receptor at the right front corner that regulates the fan speed. This wire must be unattached in order to upgrade the memory, and is probably why the original person brought it back, because of the fan noise resulting from failing to reattach the wire. If that wire is left unattached, the fan runs continually at high speed to protect the CPU and system in general. If you do not want to use a putty knife to open the Mini, take it back to Fry's and ask someone who is Mac savvy to open it and reattach the small plastic receptacle at the end of the wire into its socket at the right front of the machine. When I go to Fry's, I am always concerned because the employees allow people to pry keys off of the Apple notebooks, so don't expect that their employees to know or care about anything Mac.
    Al PB 12" 1.5   Mac OS X (10.4.5)  

  • Mac Mini (Intel) and WinXP/Remotedesktop

    Hello
    I try to run my mac mini (intel) without a screen and without a keyboard using Microsoft Remotedesktop.
    Unforunatelly the mac mini will not boot, if it is not connected to a keyboard and a screen.
    Running under Tiger the mac mini will boot without connecting a screen and keyboard. Further I can use a VNC-Server and VNC-Client in order to operate by remote control.
    Has anyone of you an idea how I can solve my mac mini boot problem?
    Kind regards, maninfo
    MacMini (PPC,Intel), iMac (PPC), PowerBook   Mac OS X (10.4.8)  

    You should probably post your question in the Boot Camp discussions:
    http://discussions.apple.com/forum.jspa?forumID=1165

  • Mac mini Intel Core Duo and HK Soundsticks USB, Any Problem???

    Hello everyone.
    I am thinking of "transferring" my "old" HK Soundsticks USB for my sis's new Mac mini Intel Core Duo.
    Is there any issue or problem with the mac detecting the USB speakers?? I thought I read somewhere here a while back that generally the Intel Macs might have a problem detecting the USB speakers.
    Thanks and cheers.

    Hi NewMoses, thanks for replying but you have to be specific, if you just bought your Soundsticks, it is most likely the HK Soundsticks II, is yours?? which has a normal audio jack, unlike the 1st Soundsticks, which has a USB input.
    I am sure the Soundsticks II with the audio jack would have not much problem on the new Intel Macs, since they are what I considered a "physical audio input", unlike the USB, which involves the USB technology, where more complication may come into play.
    Thanks and cheers

  • Firmware Updates on Mac Mini Intel

    I have a mac mini intel. Two firmware updates come up via Software Update:
    - Mac mini SMC Firmware Update version 1.0
    - Mac mini EFI Firmware Update version 1.1
    I have tried to install both of these individually several times. Each time, after I double click on the icon in the Utilities folder I enter my password and choose "shut down". Each time, the system starts the process and never really shuts down. Instead, it hangs on my desktop screen. Eventually, I push the power button. Then, I hold the button down like the instructions say. There is a sound and then it reboots a second time and returns to the login.
    The problem is that when I log back in, it says the update has not installed!
    I'm using the original Mac Mini Intel (the higher cost version) and the OS is totally updated. I need to update the firmware so that my bluetooth headset will work properly.
    Any suggestions?

    04-Dec-2006
    01:20 PM
    salimfadhley wrote:
    I have a Mac (Power PC) and a Linux PC. I cannot run "boot-camp" and I do not have any emulation software or a copy of Windows.
    I do not have a Windows 2000 or Windows XP computer, and I was not planning on getting one. The only task I cannot do is run the update for my Nokia N80.
    I wonder if Nokia are planning to release a "over-the-air" update for this phone? It's a pain that the update process requires such particular software.
    I believe v4 of the firmware is downloadable via OTA. It may be network/firmware dependant though. It does mean you'll have to pop along to the local Nokia shop for this update or follow the instructions above.
    I have full End User experience of:
    5510, 3210, 3310, 3510, 3510i, N80, N80IE, 7610, 2610, 1208 and current E90.

  • Can i connect to bluetooth headsets to a mac mini?

    I am trying to connect two motorola H730 bluetooth headsets two a mac mini for video presentations.  Basically what i am doing is teaching two different groups of people in two places using one computer. Is this possible?  Any assistance would be greatly appreciated!
    My back up plan was to connect each motorola H730 to a mac mini and an i mac, and treat them as two seperate computers for each location.
    Hopefully i was able to articulate what i am trying to do as i am barely able to understand it myself.
    Thanks.

    Ahum... You will have client again and it is much easier than you think it is.
    I did want to upgrade to OS X Server (Mountain Lion), but that does mean I first had to install Mountain Lion. At this point there was no server application any longer as everything from Lion Server will be archived.
    If you do not want to upgrade to OS X Server, just follow my upgrade path, but stop before downloading the Server app from the App Store... Simple...

  • Mac mini intel shut down problem !! please help !!

    hi !
    following problem, mac mini intel single core does not shut down, shut down process last 10 min and more (bluescreen, black wheel running) but does not shutdown at all!!
    When I log off my user and then press the shutdown button at the login window, it shuts down normally.
    Any ideas???
    Feeling like being in windows times???
    please help
    thanks
    tobias

    Good catch. I would never have though of that since I eagerly anticipate each chance I get for a clean install.
    I much prefer to get a clean start and consciously change the things I need to work - often I find that the defaults really are better and would otherwise be stuck in habit...

  • Mac Mini Intel Core Solo 1,5GHz won't turn on

    Hi at all!
    I'm in a trouble with a Mac Mini Intel Core Solo-based.
    Well, when I connect power cord, after a while, Power LED self-turns on (without powering on the Mac), but Startup Chime isn't played, there aren't no video signals on screen, Optical Drive mechanics isn't initialized and no Hard disk Drive noise is audible.
    I can hear only (if I put my ear on Mini's body) a bit Fan Noise (and a bit air flow on the back).
    If I stay-pressing power button for 4 seconds, Mac turns off. It I re-press that button, Mac turns on again. Finally, if I long-press the power button, Mac DON'T perform PMU reset (with classical speed flashing of power led, Long beep and Startup Chime).
    What can I do to fix this problem?
    Thanks very much to all readers!

    You're right!
    I wrote PMU instead of SMU.....in fact, mine is an Intel-based Mac, and PMU is present only in PowerPC Architecture.... ^_^
    Sorry for my expression error.....:)
    While I'm writing..... I thought that, in my Self-repairing operations on the Mac Mini, I've also replaced the internal 3V battery (because, with a multimeter, I'd can verify that battery voltage was only 1,75V instead of near 3V). After that, I left Mac turned off for a certain interval of time (I was busy in other personal activities). So, when I turned on again the Mac (after the complete reassembly of the entire computer), the Startup chime was played and the Mac beguns to work.
    Is possible that, in the Mini - Intel Core Solo 1,5GHz, a low internal battery can cause problems like in the old dear iMacs G3 ????

  • How to install mac os (PPC) on an external hard drive, through a mac mini (intel) ?

    Hi all,
    Let me explain:
    -  my iMac G5 iSight has a dead HDD and dead superdrive: No way to get it to run
    - I have the installation disc of Tiger (PPC)
    - I have an external HDD in FW
    - I have a mac mini (Intel)
    How to install the Mac OS PPC on the external HDD with the mac mini (Intel)  ?

    Hello,
    You must use the Intel iMac as a Firewire Optical drive.
    How to use FireWire target disk mode...
    http://support.apple.com/kb/HT1661
    http://en.wikipedia.org/wiki/Target_Disk_Mode
    Put the PPC Install Disc in the Intel iMac.
    Put the Intel iMac into FireWire target disk mode...
    http://support.apple.com/kb/HT1661
    Boot the G5 iMac holding the Option/alt key, & see if the Install Disc in the Intel iMac shows up as a boot choice.

  • Dual Powermac G5 vs Mac mini Intel Duo

    I'm sure this has been discussed already, but I would some more input on this.
    I am looking to upgrade to a faster Mac. I am currently running a G4 1.25 DP with 2Gigs of RAM. It's a fine machine, but I would like to take advantage of some of Apple's more powerful units. Anyway, I am considerering a Dual Processor 2.0 G5 Powermac with about 2.5 to 4gigs of RAM, or my other choice is one of the new Mac mini Intel Core Duo models with RAM maxed and a faster larger HD.
    My question is--what machine would give me a better performance running Universal Apps, such as Logic, Soundtrack Pro, ect...? Obviously, the Apples are all going to way of the Intel and I have been hearing great things about the new Intels. The Mac-mini has limited expandabiltiy and one Firewire port, but runs Intel. What to do? I may consider the Imac G5 core duo as well.
    Any feedback would be appreciated.
    Thanks, Randy

    well here' my experience...
    i recently sold a dual 1.8 G5 with 2GB RAM. reason being simply to get rid of it while it was still worth something. on top of that, it was really large, loud and put out a ton of heat. i bought the Core Duo mini with a GB of RAM as a sort of temporary machine until the next Intel "Pro" towers come out. i've been using it for about a month now for Logic Pro, GarageBand, Ableton Live and Reason and soon my SoudTrack Pro Universal disks will be here as well. i was really concerned that the system would feel slow coming from the G5 but i can totally recommend this machine with confidence as it feel and performs as fast as (and sometimes faster than) by dual G5. i'm talking when using Universal binaries of course. these Intels are fast. the mini is a silent, snappy little machine. there are a few things i miss that will eventually prompt me to buy a tower such as:
    limited internal storage options - i believe the largest 7200RPM hard disk you can put in the mini is the 100GB from Seagate. of course, external Firewire and USB storage is always an option.
    the limited graphics card could be an issue for some. it doesn't seem to directly affect audio performance but just knowing that it's using your hard RAM is a bit unsettling.
    i miss FireWire 800, even though the G5 had serious slow-down issues when writing to fw800.
    i miss using two displays.
    having said all that; the speed, quietness and cool running temperature of this mini is enough to outweigh any negatives. i notice zero speed decrease from the dual g5 and cost me about a third of the price. it will make a great temporary workstation for me and when the next towers come out it will make a great livingroom entertainment system and perform node duties over gigabit ethernet. don't hesitate. it's a great system.

  • Tiger Update Crashes my Mac Mini Intel

    I got a new Mac Mini and finally got it going though it was not easy to transfer from my eMac. But I prevailed. Then I made the fatal mistake of updating all that the Software Update software suggested. Now my brand new Mac Mini will not run at all.
    REWIND: I tried to update my eMac a couple of weeks ago to Tiger. I did that and ran Software Update and GUESS WHAT? It crashed my eMac so badly I had to reinstall ALL the Panther software.
    Did Microsoft buy Apple???

    I figured out the problem last night after a week of gnashing, grumping, and general anxiety. Hope this post helps others with a similar problem.
    I have a free Lexmark 1150 All-In-One printer attached to my Mac. Apparently Tiger DOES NOT like the Lexmark application that turns off the printer during Restart and Shutdown. The application is in Library/Startupwhatever folder and I just trashed the Lexmarksleep..app (whatever it is named - I'm at work and cannot remember the exact name) and erased it.
    Now my Mac Mini is back working like a Mac - PERFECT.
    fiat1969
    Mac Mini Intel Dual Core Mac OS X (10.4.6) Brand New
    Mac Mini Intel Dual Core Mac OS X (10.4.6) Brand New

  • Mac Mini (Intel) Ticking/Clicking Sound

    I purchased a new Mac Mini (1.8, 80gb, 1gb, superdrive) about a week ago, and have enjoyed using it ever since, however I recently there is a ticking or clicking sound coming from the unit which sounds to me like it may be the hard disk either starting up, or parking down, this happens intermittently and doesn't seem to follow any strict pattern.
    Opening Activity Monitor and viewing the Disk Activity tab reveals that there is usually a small amount of data being written to the hard disk when the ticking occurs, however this is not the case 100% of the time.
    The disk appears to be fine according to its S.M.A.R.T. status, however I've had "verified" disks fail on me before, therefore don't really trust the S.M.A.R.T. monitoring.
    Does anyone have any suggestion on what this may be?

    The drive is actually a Fujitsu.
    It's now started clicking again after being left on
    over night, I've closed everything and tried running
    fs_usage, but could see no distinct pattern when the
    sound occurred.
    This is happening to me with my 80GB Fujitsu Mac Mini Intel. It started after about two weeks of use. This also happened to my G4 Mini with the stock Seagate drive. My old G4 eventually beat itself to death over the course of a month and I have a feeling this one is going to do the same. My second drive (Toshiba I think) didn't have any problems so it may be that only certain drive models are affected.
    I also downloaded and ran fseventer, which again
    revealed nothing, when it first clicked after opening
    the app it said the machine was writing to Finders
    plist file, however nothing registered after this
    with subsequent clicks.
    Yeah, fs_usage doesn't seem to reveal anything significant either.
    I'm still in the dark with this, and have a hard time
    believing it to be normal.
    I agree, I think there's something wrong with the Mac Mini power controller. My drive mainly does it when it is left running overnight. As soon as I sleep and wake the drive, the noise goes away - to me that suggests a controller just needs reset. I've resorted to sleeping the drive overnight and when I'm out until Apple post a fix for it. The drive head slamming into the mechanical stop is not normal in the same way a train slamming into the mechanical stops at the station is not normal. Some control is being messed up - according to the last site, it is usually caused by the fact that the servo calibration is messed up and cannot properly govern the speed and position of the head assembly on the drive and this is worsened by temperature.
    http://kiza.kcore.de/software/declunk/
    http://forums.macrumors.com/showthread.php?t=232114
    http://macminiforums.com/forums/arch...php/t-162.html
    http://macminiforums.com/forums/arch...php/t-332.html

  • Dell Laptop and Mac Mini HD swap?

    I've got myself a Mac mini Intel, 60 gig hard drive in it running on empty and I've also got a Dell Inspirion 6400 Laptop and was wondering if it is at all possible to swap the two? Anybody know?

    They both use SATA hard drives, so chances are very high that you could swap the drives over successfully. Of course, you may need to repartition, and would nee to reformat and reinstall both with the correct operating system, and you would loose functionality of the recovery partition (if it has one) on the Dell's hard drive once it was not longer in the Dell, and have no easy way to put a similar recovery partition on the mini's hard drive once it's in the Dell - which would make recovering that system rather problematic if it needs it and you don't have complete reinstall disks.
    All in all, unless money was a real problem, I'd be more inclined to buy a larger (and possibly faster) hard drive for the mini. http://eshop.macsales.com/Search/Search.cfm?Criteria=SATA%202%2E5%20Hard%20Disk% 20Drive&sort=a is a good place to check out the options, with the 7200rpm drives being particularly notable for the potential performance benefits to the system as a whole.

Maybe you are looking for

  • Can't insert a dvd in the slot

    Cannot insert a DVD into the DVD slot on my iMac running 10.8.3.  DVD will go in the slot but will not stay in..Drive does not recognize anything inserted into it.  Is there a way to correct this?  Rebooting the machine does not work.

  • Project Server certificate authentication

    I need to know if MS Project Server 2013 requires client-side certificate authentication so that I can implement correctly the authentication part  in my client app that needs to access the REST APIs of Project Server, and handle accordingly the serv

  • Migrating Office 2001 Entourage files to Office 2004 Entourage

    Does anyone know how to migrate Office 2001 Entourage files originally in OS 9.1, Calander events, address book contacts, tasks, notes, etc, to Office 2004 Entourage files in OS 10.04. Thanks

  • Scrap receiving in MIRO

    Dear all , In subcontarcting PO we have sent 150 kg material, In PO we have scrap as line item 25 kg out of this 150 Kg Now at the Time of GRn 125 kg is 101 mvmt and 25 Kg scrap 545 mvmt it carried out . But in MIRO entries for 125 kg only is availab

  • [SOLVED] Grub problem using fakeraid

    Hi, I've been trying to install arch on Raid0 following https://wiki.archlinux.org/index.php/In - _Fake-RAID. I load dm_mod and install arch using this partition table pdc_jhaaaaghi1 (Boot) Primary NTFS (Windows) pdc_jhaaaaghi2           Primary NTFS