Logitech Itouch 2.22 and Asus Update 6.x won´t install because of X-FI!Solution HER

Cat please pass that on to the driver Team.
Since I have installed (and many others here too!) the X-Fi card, I can not install my Logitech I-Touch and the Asus Update Software. Both quit with an error during setup. This all didnt happen before the X-Fi.
This is really no fun and I am getting a bit angry as the X-Fi Software seems to be a pile of beta. Also concerning CMSS 3D performance issues under BF2 but thats another story.
Every one else is invited to attach his/her problems with other software since the X-Fi install.
This needs to be adressed quickly!Message Edited by morphium on 2-07-2005 :3 AM
Update:
evac has posted a workaround which indeed works! Thanks to evac!
"Hey,
i asked logitech support and they told me to try the following:
change HKEY_LOCAL_MACHINE\Software\Wow6432Node
to HKEY_LOCAL_MACHINE\Software\aWow6432Node
and voila, it worked! No problems when installing asus update and logitech itouch.
After installation you can change it back to the old entry."
I reverted back to the old setting after the Logitech Software installation and it still works. As for the Asus update I think it wont work after reverting back.
!!!Creative now get your homework done and bring a fix for this!!!
Cat,
you should mention this in your FAQs as I think many people are affected.Message Edited by morphium on 2-07-2005 :35 AM

Cat
I didn?t speak to the support yet as will run into nowhere with this issue when I might ring them up. I know this, as my friend who has a fatality with connection problems on the extension box concerning the microphone plug (sound comes in but it doesnt appear in the applications) got the suggestion to use the plug on the back of the sound card. I mean what kind of help is that? He has an extension box and shall use the back plugs of the card? Gimme a break.
Anyway. I do not want to uninstall/install everything again which is X-Fi related. I let it rest as it is without the mentioned software for the moment.
Moving the card to another Slot won?t help either as this is a software issue from the X-fi console or drivers.
Another member here reported already the same symptoms. No change on the system except the X-Fi -> Logitech+Asus Software strikes out.
Regarding the miscoding related to Quicktime 7 it is very obvious that some elements in the X-Fi software/driver do mess around with other software also.
I?ll make a try and ring the support although I do not expect much help. They will certainly refer to Logitech and Asus.
You could perhaps pass this on to the developer team.
Thank you

Similar Messages

Safari question here... Can I purchase a browser update for my mac book? I have OSX 10.6.8 and the "update softdate" function won't let me get past Safari 5.1.10. Please tell me I don't need a new computer just yet... Thx!!

Safari question here... Can I purchase a browser update for my mac book? I have OSX 10.6.8 and the "update software" function won't let me get past Safari 5.1.10. Please tell me I don't need a new computer just yet... Thx!!

You need to upgrade OS X.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

HT6030 I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer. Tried installing download from MailUpdate & advised the disk did not meet the requirements for update. Hmmmm.

I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer. Tried installing download from MailUpdate & advised the disk did not meet the requirements for update. Expect it's due to being at 10.9.1. Mail is still teetering between dysfunctional and non-functional. Advice?

I'm not sure what "Mail Update for Mac OS X 10.5.6" is. Mac OS X 10.5.6 is Leopard, a system that is quite old at this point. There have not been any Mail updates for Leopard in quite some time. If you are trying to install some old Mail update for Mac OS X 10.5.6 in Mavericks, that won't work.
If you are trying to install the Mavericks Mail update manually, that's not necessary if you have updated through the App Store. If the App Store shows no updates, you don't need this. (The error message doesn't make sense, and may indicate some other problem with your system, assuming that you were downloading this update from Apple's site.)
I'd advise you to start a new topic in the Mavericks forum and describe the problems you are having with Mail. Be sure to include specifics, but try to avoid speculating on causes, as responses that may be related to an inaccurate assumption on your part can cloud the issue.

I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error w

I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error writing to file: c:\Config.Msi\feea.rbf. What do I do?

Hi Beverly ,
Please refer to the following and see if this helps.
https://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html
Regards
Sukrit Dhingra

HT5934 My phone downloaded the update but it won't install it, it keep saying I'm no longer connected to the Internet and I am I'm under wifi at home what should I do?

My phone downloaded the update but it won't install it, it keep saying I'm no longer connected to the Internet and I am I'm under wifi at home what should I do?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(100170)

I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.

I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.
When I mouse over the icons, the rainbow appears as if it was processing something. The problem is eliminated when I restart my computer but it comes back after a while.
I guess I cant make a backup copy and restore the whole disk because the copy would be made with this error.
Can anyone help me? Anyone with the same issue?

Update: I was able to test out the HDMI adapter as well and the same issue occured. I'm stumped. 10.8.1 maybe.

Using adobe updater i can download PS6 update but it won't install.

Using adobe updater i can download PS6 update but it won't install.

I have just had a good chat with an Adobe live chat person. He has explained to me why I am getting the U44M1P7 error.
I have a perpetual version of CS6 that I bought earlier in the year. The creative cloud update only applies to versions of CS6 that have been downloaded via creative cloud. The error means I am trying to update a version of CS6 (my perpetual copy) that has aleady been updated.
I have version 13.0.4 and the update is 13.1.2. If I want the update I have to uninstall CS6 from my computer (my perpetual version) and download CS6 from creative cloud. Then I will be able to have the updates.
Hope this helps you. I haven't ried it yet but will post my results when I do.

[SOLVED] Both stable and unstable chromium-pepper-flash won't install

Hi all,
I just installed Chromium, but am unable to install Flash. It was recommended that I install pepper-flash rather than flashplugin, since the latter is deprecated. But there is a problem:
chromium-pepper-flash-stable won't install because the link to the package is invalid:
ERROR: Failure while downloading google-chrome-stable-31.0.1650.57-1.x86_64.rpm
chromium-pepper-flash won't install because the md5 checksum is invalid:
==> Validating source files with md5sums...
google-chrome-unstable_current_amd64.deb ... FAILED
LICENSE.txt ... Passed
==> ERROR: One or more files did not pass the validity check!
This leaves me with three questions:
Does this happen often, or is it a freak coincidence that both recommended Flash packages are broken on the first day I start using Arch?
I can probably find the proper package file for chromium-pepper-flash-stable, but what is recommended practice for installing it (if I am in a hurry, or just impatient)? Should I hack the PKGBUILD file myself?
Should I flag these packages as out-of-date in AUR?
Thanks!
Last edited by mhelvens (2013-12-04 22:51:39)

Yes, edit the PKGBUILD yourself. Both the link and the checksum.
Have a look at the comments: https://aur.archlinux.org/packages/chro … mments=all Being broken is not an uncommon occurrence for this package.

Acrobat 9.0 Pro and Office 2008 updates download but won't install

I hope I'm not alone experiencing the following difficulties installing third party patches and updates and that someone who reads this may recognize the problem…and its solution. I've run Adobe Updater (6?) for CS4 Design Standard which includes Acrobat 9.0 Professional, and subsequently, Microsoft Autoupdate for Office 2008 v12.0.1, but find that neither will install the downloaded updates which disappear immediately after an (unsuccessful) installation attempt.
Disk space is not a problem (500GB HD) nor is memory (4GB RAM); I'm using OS 10.6.4 (10F569) which is the most current set of OS updates I can locate. I had successfully been running CS4 with Adobe's most recent patches (e.g. P'Shop 11.0.2 and Acrobat 9.3.3) until the 9.3.4 patch failed to install with the message that +"Safari and Acrobat apps must be closed in order to proceed"+—they were closed as was everything else that wasn't essential according to a check of the Acitivity Window. A grab of the alert panel reads:
+"AcroProUPd934_all Update Failed: The Patch has failed because the application has been modified since it was originally installed (for example, plug-ins may have been disabled). Please go to the Adobe support website for more information regarding how to re-enable disabled components prior to installing the patch, or you can uninstall and reinstall the application, and then reinstall the patch."+
Of course, uninstalling CS4 and reinstalling the entire suite of apps reverts all of them to their original versions, now none of them will accept an update…whether manually downloaded and fed to it or by using Adobe's most recent AutoUpdater. The most consistent message is an alert panel stating that in order to continue, Safari and Acrobat applications must be closed—which they are.
Not surprisingly, after nearly 8 hours on a cell phone with Adobe Tech Support in Delhi, 5 different techs and a manager, the case remains open a week later; it seems +"no one has ever seen or heard of this problem before"+ and an overly apologetic manager could only repeat +"it's [Adobe] policy to remove all copies of CS4 from existence once CS5 is introduced."+ While we waited for 500MB of updates to download more than once, a helpful tech suggested I'd have more luck finding a used copy of CS4 on the net than getting a link to another download from Adobe.
With regard to Microsoft Office 2008, I'd been running v12.0.1 and the MS Autoupdate app has tried to download and install v12.1.0 (and those which follow) but when installation is attempted, an alert panel reads:
+"There is a problem with the Office database. Office might be unable to access the data base or the database file might be damaged. Without the database, you might be unable to use the Address Book, Scrapbook, and other features that store your personal information. To rebuild the database, Open Microsoft Office 2008/Office, and then open the Microsoft Database Utility. For more information, open the Database Utility application, and on the Help menu, click Database Utility Help."+
All attempts to rebuild the database fail, noting…
+ERROR: Failed to open database [Head]+
+ERROR: Corruption opening database [16003:""]+
======================
+Scan Ended+
====================
Two hours on the phone with a relentlessly pleasant Nova Scotian tech for Microsoft revealed little but the suggestion that +"the app doesn't seem to be able to recognize your hard drive. I've never seen this problem before."+
With luck, perhaps someone reading this far recognizes the issue and can offer a solution? It will be gratefully received! Thanks,
David

Disk space is not a problem (500GB HD)
How much space is available out of the 500GB?
Have you tried any of the following:
Disconnect all peripherals from your computer. Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select *Disk Utility.*
Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
Click _*Repair Disk.*_
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and try the installations again.

I have an older iMac G5 I updated the computer and itunes updated now it doesn't work because it needs a newer version of quicktime and the computer won't let me Can anyone help

I have an older iMac G5. I updated the computer and itunes updated also. Now it won't come up It wants a updated quicktime. The computer isn
't letting me do that. I need an older version of itunes. can anyone help?

iTunes 10 works with Leopard on a PPC Mac if you have Quicktime 7.7 available here:
http://support.apple.com/kb/DL761

Is a solo window saying "A security and stability update is available." to install FF26 really valid or is it bogus?or

Here is what the questionable window looks like:
upper left corner/across and down
ln1 (ff global logo) "Software Update"
ln2 "Update available"
ln3 "A security and stability update for Firefox is available:
ln4 "Firefox 26.0"
ln5 "It is strongly reco'd that you apply this update for FF asap.
ln6 HTML Link "View more info about this update"
ln7 (bottom of window) "ask Later" button and "Update FF" button
While entering this info the window went away!!!
Before it did i could not copy any of the text (do have screen shot however) and the link did not resolve to any web address. Looked like std FF page but NEVER seen anything like it before!
no way i was going to click anything except the close [X] button.
If it is valid, you need to remove the restrictions on it; to make it less suspicious.
If it is bogus, do you have a plugin or addon to intercept such malicious probes?
Currently using FF25.0.1; on xp/sp3
thanks
NET2868 friday 12-20-2013 mid (EST)

Firefox 26.0 is available for updates.
Do you get this update offered if you open Help > About?
You can find the full version of the latest Firefox 26.0 release in all languages and for all Operating Systems here if you want to install manually:
*http://www.mozilla.org/en-US/firefox/all.html

Zen Xtra fails PlaysForSure Firmware update - Now it won't install a firmw

Zen Xtra 40 - Was upgrading from .30 firmware to 2.0.03 to support WMP and VistaFirmware Upgrade to Failed to Complete
Downloaded and ran PlaysForSure Firmware 2.0.03
It identified my Zen Xtra and started the upgrade, Zen Xtra rebooted and just sat there. 2 hours later I disconnected Zen Xtra and its in Recovery Menu. Reboot says Firmware Problem and goes to the recovery menu again.
If I plug it back into my system it says it found a 20mb 'Portable Device' MTP and lets me open the device but nothing is on the 20mb partition.
If I run PlaysForSure Firmware 2.0.03 again it says I must plug in the device, even though its definitely plugged in and recognized as an MTP device.
Seems like the PlaysForSure Firmware 2.0.03 isn't designed to identify the device after a partial upgrade? Tried older .30 Firmware install program, it can't identify the device either. Device shows up in Device Manager as Nomad Jukebox Zen Xtra using a Microsoft Driver.
I've installed the latest JB3MV2_PCWDRV_US_2_0_00.exe drivers and it does not help. Device still detects as a Nomad Jukebox Zen Xtra. If I uninstall Windows Media Player it won't install any drivers and won't accept the PCW Driver either.
Where can I get a firmware updater that will function when my Zen Xtra wants to be an MTP device?I tried another computer with WM9, just PCWDRV 2.0 drivers, and it will not detect and install the drivers when I plug the device in. Says it can't find suiteable drivers for this device.
Tried Cleanup, Reload OS, Reboot.
Boot v.4 and HW v0.0. Any ideas?

Wow after searching hundreds of documents on this forum I got my firmware updated
!!! I took my notebook, which I had recently upgraded from WMP9 to WMP after I could not get it to recognize and upgrade my Zen. I uninstalled WMPI uninstalled WMP RuntimeRebootedI went to Microsoft and get WMP0 specificallyInstalled it and closed itI ran the ZenXtraPS4Audible_PCFW_LB_2_0_03.exeOn the Zen I selected Reload OS, I click to have it reload OS, while it was doing that I plugged it into the notebook. The Firmware Tool Detected the Device again!!Current version 2.0.03Upgrade will be 2.0.03I click Upgrade!?It upgraded this time!!?The bummer is ALL MY MUSIC is wiped off my device. I didn't format it, but I guess the upgrade does it for you. Which means I just lost hundreds of dollars worth of songs since WMP doesn't have a license transfer and all my music was on the ZEN. So even though I have the files on my computer, they won't play because I don't have the license any longer.

MacBook Air SMC Update v1.8 - Won't install

Software update says to install, but it won't install even when I click the checkbox to install it (in Software Update). I install, then run S/W Update again and the darn thing is still in there saying it needs to be installed. I have tried several times to install, even tried downloading it directly from Apple website and installing from there - still shows up in S/W Update as needing to be installed. Maybe it is installed and there's some bug in the S/W Update App that won't "release" it from S/W Update's tracking of versions? What gives? Now there is a firmware update 1.9 - can I install 1.9 if 1.8 won't install?
MacBook Air 13" (late 2010)/OS 10.6.8 (and no, don't tell me to upgrade OS - not gonna do it - finally got a stable system - other than this - and am not gonna wreck it)
Any advice GREATLY appreciated, since I am now experiencing some funkiness with the battery charging/magsafe adapter (sometimes won't charge even though battery is below 60% charge) and am hoping this firmware update might fix that.

No more than a minute. It is a two step process. Run the installer, reboot, watch a progress bar and finished. If you are still in the run the installer stage it should be safe to perform a force quit (hold power button for 10 seconds). If it is in the middle of the reboot you may need to visit an Apple store.

HT201314 I want to remove older updates from APP Store update page that will not install because they are not compatable with my OS Version 10.8.5

There are a couple of updates on my APP STORE page that are extremely annoying, they can't be installed because they are to old for my OSX version 10.8.5, I want to delete or remove them so that Spotlight stops telling me that I have 2 updates to install, when they can't be installed unless I revert to an older OS version.
Mac Pro 2010, Dual 2.4 GHz Quad-Core Intel Xeon, 26 GB 1066MHz DDR3,

Try:
Hide and unhide purchases in the Mac App Store - Apple Support
This is another thing to look at (see number 5):
https://nicolamonaca.wordpress.com/2014/01/22/how-to-hide-a-software-update-in-t he-mac-app-store/

Thunderbolt firmware update 1.2 won't install

I can't find a way to get Thunderbolt firmware update 1.2 installed. I need this update because my external display won't work without it. Machine is late 2011 13" Macbook Pro running OS X 10.9.5. Other updates install without problems, only this update is keeping coming back. Installation seems to go fine, however it doesn't actually install it and update re-appears to App store.
Stuff I've tried already
Install update on AC & fully charged battery
Download & install update manually from Apple website
Install update with & without thunderbolt connected
...with these combinations, App store update log shows 8 installs for that update (and it's still not actually installed)
Anyone had similar problems? Any ideas how to get it installed?

Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal. The next normal startup may also be somewhat slow.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.

Logitech Itouch 2.22 and Asus Update 6.x won´t install because of X-FI!Solution HER

Similar Messages

Maybe you are looking for