Logitech LX7 Mouse

I have a problem associated with the right mouse button. When I right click on my 3D program I get a tray with the finder and open apps icons. This prevents the execution of the action I want to carry out in the 3D program.
This only happens on the Mac Pro, not the G5 or Mac Mini.
I downloaded the Logitech control center and tried to change the command for the right button, but that didn't help.
Also went to Sys Prefs-Dock & Exposé, no help there either.
Thanks
Rick

I am having similar issues with the LX7. I found that these issues are usually fixed by unplugging and replugging the USB receiver. Though, it is still a hassle and it continues to affect productivity.

Similar Messages

  • Audition 1.5 and Logitech LX7 wireless mouse

    Tried above stated mouse,  Autoscroll will not engage when looking to edit waveforms. All settings for autoscroll engaged in the mouse properties, although the Logitech program does not have an application-specific setting to change for the desired program. Microsoft, on the other hand, does. With a wired nouse I did not have to select custom properties for autoscroll, though could if I wanted choose Audition as the application and set the mouse buttons just for that ap.
    Logitech support has been (surprising?) worthless. Looks like I will return that mouse in favor of just sticking with Microsoft, but wanted to check if anyone else has had Logitech mouse issues. TIA

    Well, I went ahead and tried the mouse without installing Logitech drivers, but I left the Intellimouse/Microsoft drivers in place. Yes, the mouse works, though being left handed, I prefer to mouse with that hand and reverse the common click/right-click buttons. The Intellimouse control panel won't reverse them as it doesn't recognize a Microsoft mouse. Yes, I could uninstall the Intellimouse program and revert to generic XP mouse drivers, but I am getting tired of beating my head against the wall trying to make a shoddy product work. It is part of the LX-310 mouse/keyboard combo; I asked on the Logitech forums if this even classified as an LX7 mouse (the software says that's what it is, but you only see "310" on the mouse itself). Perhaps the combo package is a dumbed down version? Their tech support via phone (worthless) tried to tell me that I could select the button on the mouse and choose "1a" to specify a specific program to associate with functions. There is no "1a" visible, period. I tried one more call to them and got a person who said everyone is swamped and for me to give him a number for them to call me back, or for me to call the next day. Oh, I gave him something, but it wasn't a number He was of no help when I stated I had already talked with support and the issue isn't resolved, I wanted it escalated. Ultimately the escaltation is the location where they can place my business, and the sun does not shine there. The product is only a few days out of the box and can be easily returned to place of purchase, which it will be. I look forward to reading them filing bankruptcy, but let's not get nasty
    The wired/optical Microsoft mouse works exactly as needed, with autoscroll a no-brainer in Audition. By chance does anyone know if some of the newer Microsoft wireless/laser mice are more precise? Editing is, in fact an exact science; I was (and probably still am) a master with magnetic tape and a blade, I can prove I am the same in the digital medium as well.

  • Logitech LX7 Issues

    I'm using a cordless LX7 Logitech mouse. I'm finding the Logitech Center preference pane is unable to locate the device despite it functioning and the receiver being clearly plugged in.
    Has anyone else run into a similar problem with the Logitech Control Center not being able to locate their devices?
    Is there anyway to completely uninstall the Logitech Control Center?

    Same. The Logitech control panel doesn't recognise my Logitech LX7.
    I'm beginning to think a lot of the problems I am getting under Leopard are down to the mouse:
    The cursor doesn't change from one state to another as expected. For instance, in Safari it looks like the insert cursor (like an 'I' in Times font). Even when the cursor is over a link it remains as a select cursor rather than the arrow.
    Also, I can no longer select some text and drag the selection to a new position. I have to select, copy and paste instead.
    Also, the Dock doesn't hide and magnify as expected. I have to click at the foot of the screen to get the Dock to unhide itself, and then magnify is stuck at the position I clicked.
    Clicking menus are also problematic. Clicking a drop down menu opens the menu okay, but then I need to click AND hold any submenus. Clicking any submenus just makes the menu disappear. I would rather click the submenu and move the mouse to the sub-submenu or link and then click again. Clicking and holding increases my RSI.
    None of these issues occur on my Intel Mac Book Pro.
    But because the G5 Power Mac is my main machine I am finding Leopard extremely frustrating.
    I sure hope Apple is reading all these issues.

  • HOWTO: Get a logitech marble mouse to work w/scroll and more

    This bit of information was taken from a post at the ubuntu forums. It worked for me, enjoy!
    Modify your Xorg.conf/XF86Config file to have this in the mouse section:
    Section "InputDevice"
    Identifier "MarbleMouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "Buttons" "5"
    Option "ButtonMapping" "1 8 3 6 7"
    Option "EmulateWheel" "true"
    Option "EmulateWheelTimeout" "300" # msec
    Option "EmulateWheelButton" "6"
    Option "YAxisMapping" "4 5"
    EndSection
    here is the exact post on the ubuntu forums.
    http://ubuntuforums.org/showpost.php?p= … stcount=21

    Hotplugging now automatically sets up the small buttons as forward/back.  Put an fdi in /etc/hal/fdi/policy as the wiki states, but after restarting hal and xorg only the left and right mouse buttons work.  Tried replacing "Logitech USB Trackball" with "ImExPS/2 Logitech Explorer Mouse" for the hell of it, no change.  Any ideas?
    <deviceinfo version="0.2">
    <device>
    <match key="info.product" string="Logitech USB Trackball">
    <merge key="input.x11_options.EmulateWheel" type="string">true</merge>
    <merge key="input.x11_options.EmulateWheelTimeout" type="string">200</merge>
    <merge key="input.x11_options.EmulateWheelButton" type="string">9</merge>
    <merge key="input.x11_options.XAxisMapping" type="string">6 7</merge>
    <merge key="input.x11_options.YAxisMapping" type="string">4 5</merge>
    <merge key="input.x11_options.Emulate3Buttons" type="string">true</merge>
    </match>
    </device>
    </deviceinfo>

  • Logitech marble mouse

    i am already on my second mighty mouse. the first had to be replaced under warranty. my second mouse has had issues that cleaning wont help so i am going to buy something completely different. i am considering the logitech marble mouse. i like the fact it has a huge ball. (not that size counts!) has anyone here tried this mouse and would mind leaving a quick review. THANKS!!!

    i received it already and i am never going back to the unmighty mouse. i stupidly took awhile before i realized i had to go to logitech and download the ability to customize it. sometimes i am not too swift but now it works fine. i am already noticing less strain on my wrist. bigger IS better!

  • Logitech Marble Mouse - Control Center

    Hi,
    I recently updated my OS to 10.4.7, and while I've had some recent activity with different mice, I went back to the Logitech Marble Mouse and Control Center, and found the Control Center stopped recognizing the unit. I've tried to remove it via the un-installer and no dice. I also installed SteerMouse, but that will end up costing me $20... I also tried USB Overdrive, and it doesn't seem to work.
    Can Anyone recommend any steps to get Control Center back working? The Logitech form seems hard to find any relevant info.
    Thanks!
    Adam
    G5 Dual 1.8/2G Ram   Mac OS X (10.4.7)   Logic Pro 7.2,1, 828MkII, UAD-1, Radikal SAC 2K

    Have you installed the latest Logitech Control Center .
    The support page says posted 4/11/06. Maybe try that.
    iMac G5-2.1-1.5G/miniStackV2-320GB FW-USB Ex.HD/Netgear WGR 614   Mac OS X (10.4.7)   iPod 60GB Photo/Epson Stylus Photo RX620/Kodak P880/Fuji S7000

  • Ipad 2 can't see logitech bluetooth mouse M557

    Hi,
    I made sure that this mouse would connect to my ipad 2 before I bought it and other bluetooth equipment. My iPad sees and connects to everything else but not the mouse. I am able to connect the mouse fine to my HP laptop.
    I've checked the Apple website ant this logitech bluetooth mouse M557 (http://www.logitech.com/en-ch/product/bluetooth-mouse-m557) should connect to Mac OS and IPad 2.  Is that simply not true or am I doing something wrong.  I've checked the driver is up-to-date via laptop, I've restarted everything several times and I've tried googling to see if others have had an issue. The only think I've found is a way to "hack" my iPad but i REALLY don't want to do this!!
    Can anyone help me please?
    Thanks in advance!!

    Anyone?

  • Touchpad detected as PS/2 Logitech Wheel Mouse

    Hi,
    The touchpad on my Asus U46SV laptop is being detected as a PS/2 Logitech Wheel Mouse. Therefore no touchpad driver is loaded and all fancy features (two-finger scrolling, disable while typing, etc) are unavailable. How can I fix this?
    $ xinput list
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ PS/2 Logitech Wheel Mouse id=13 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Video Bus id=8 [slave keyboard (3)]
    ↳ Sleep Button id=9 [slave keyboard (3)]
    ↳ ASUS USB2.0 WebCam id=10 [slave keyboard (3)]
    ↳ Asus WMI hotkeys id=11 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
    $ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
    [ 0.000000] Command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
    [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040200000 - 00000000aabcc000 (usable)
    [ 0.000000] BIOS-e820: 00000000aabcc000 - 00000000aacdf000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aacdf000 - 00000000aace1000 (usable)
    [ 0.000000] BIOS-e820: 00000000aace1000 - 00000000aacf4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aacf4000 - 00000000aacf5000 (usable)
    [ 0.000000] BIOS-e820: 00000000aacf5000 - 00000000aade8000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aade8000 - 00000000aaf19000 (usable)
    [ 0.000000] BIOS-e820: 00000000aaf19000 - 00000000aafe8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000aafe8000 - 00000000aaffd000 (usable)
    [ 0.000000] BIOS-e820: 00000000aaffd000 - 00000000ab000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000ab000000 - 00000000afa00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff980000 - 00000000ffc00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000014fe00000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: ASUSTeK Computer Inc. U46SV/U46SV, BIOS U46SV.203 06/09/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 0A0000000 mask FF8000000 write-back
    [ 0.000000] 3 base 0A8000000 mask FFC000000 write-back
    [ 0.000000] 4 base 0AB000000 mask FFF000000 uncachable
    [ 0.000000] 5 base 100000000 mask FC0000000 write-back
    [ 0.000000] 6 base 140000000 mask FF0000000 write-back
    [ 0.000000] 7 base 14FE00000 mask FFFE00000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000ab000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xaaffd max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fcc70] fcc70
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000aaffd000
    [ 0.000000] 0000000000 - 00aae00000 page 2M
    [ 0.000000] 00aae00000 - 00aaffd000 page 4k
    [ 0.000000] kernel direct mapping tables up to aaffd000 @ aaff8000-aaffd000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000014fe00000
    [ 0.000000] 0100000000 - 014fe00000 page 2M
    [ 0.000000] kernel direct mapping tables up to 14fe00000 @ 14fdf9000-14fe00000
    [ 0.000000] RAMDISK: 1fda0000 - 1fff0000
    [ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 00000000aaffee18 00074 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
    [ 0.000000] ACPI: FACP 00000000aaf9bd98 000F4 (v04 _ASUS_ NoteBook 06222004 MSFT 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
    [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xAAFE5E40/0x00000000AAFE5D40, using 32 (20110413/tbfadt-489)
    [ 0.000000] ACPI: DSDT 00000000aaf7c018 0DC69 (v01 _ASUS_ NoteBook 00000000 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000aafe5e40 00040
    [ 0.000000] ACPI: APIC 00000000aaffdf18 000CC (v02 _ASUS_ NoteBook 06222004 MSFT 00010013)
    [ 0.000000] ACPI: HPET 00000000aafe6d18 00038 (v01 _ASUS_ NoteBook 06222004 AMI. 00000003)
    [ 0.000000] ACPI: ECDT 00000000aafe5b18 000C1 (v01 _ASUS_ NoteBook 06222004 AMI 00000000)
    [ 0.000000] ACPI: MCFG 00000000aafe6c98 0003C (v01 _ASUS_ NoteBook 06222004 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000aaf7b818 00799 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000aaf7a018 00996 (v01 PmRef CpuPm 00003000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000aaf9cc18 00176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
    [ 0.000000] ACPI: SSDT 00000000aaf5ea98 002EF (v01 SataRe SataTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: ASF! 00000000aafe5a18 000A0 (v32 INTEL HCG568D 00000001 MSFT 000F4240)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000014fe00000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000014fe00000
    [ 0.000000] NODE_DATA [000000014fdfb000 - 000000014fdfffff]
    [ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014b400000-ffff88014edfffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0014fe00
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[9] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040000
    [ 0.000000] 0: 0x00040200 -> 0x000aabcc
    [ 0.000000] 0: 0x000aacdf -> 0x000aace1
    [ 0.000000] 0: 0x000aacf4 -> 0x000aacf5
    [ 0.000000] 0: 0x000aade8 -> 0x000aaf19
    [ 0.000000] 0: 0x000aafe8 -> 0x000aaffd
    [ 0.000000] 0: 0x00100000 -> 0x0014fe00
    [ 0.000000] On node 0 totalpages: 1025699
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 680269 pages, LIFO batch:31
    [ 0.000000] Normal zone: 4473 pages used for memmap
    [ 0.000000] Normal zone: 322695 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
    [ 0.000000] PM: Registered nosave memory: 00000000aabcc000 - 00000000aacdf000
    [ 0.000000] PM: Registered nosave memory: 00000000aace1000 - 00000000aacf4000
    [ 0.000000] PM: Registered nosave memory: 00000000aacf5000 - 00000000aade8000
    [ 0.000000] PM: Registered nosave memory: 00000000aaf19000 - 00000000aafe8000
    [ 0.000000] PM: Registered nosave memory: 00000000aaffd000 - 00000000ab000000
    [ 0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000afa00000
    [ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
    [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff980000
    [ 0.000000] PM: Registered nosave memory: 00000000ff980000 - 00000000ffc00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffd80000
    [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:30600000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014fa00000 s78464 r8192 d23936 u131072
    [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u131072 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1006885
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3963540k/5502976k available (4064k kernel code, 1400180k absent, 139256k reserved, 3304k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2294.473 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.15 BogoMIPS (lpj=7648243)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000118] Security Framework initialized
    [ 0.000122] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000492] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001691] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.002141] Mount-cache hash table entries: 256
    [ 0.002461] Initializing cgroup subsys cpuacct
    [ 0.002487] Initializing cgroup subsys memory
    [ 0.002502] Initializing cgroup subsys devices
    [ 0.002504] Initializing cgroup subsys freezer
    [ 0.002505] Initializing cgroup subsys net_cls
    [ 0.002507] Initializing cgroup subsys blkio
    [ 0.002553] CPU: Physical Processor ID: 0
    [ 0.002555] CPU: Processor Core ID: 0
    [ 0.002560] mce: CPU supports 7 MCE banks
    [ 0.002572] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002578] using mwait in idle threads.
    [ 0.003714] ACPI: Core revision 20110413
    [ 0.160380] ftrace: allocating 16144 entries in 64 pages
    [ 0.167075] Switched APIC routing to physical flat.
    [ 0.167426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.200410] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07
    [ 0.304675] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
    [ 0.304681] ... version: 3
    [ 0.304682] ... bit width: 48
    [ 0.304683] ... generic registers: 4
    [ 0.304685] ... value mask: 0000ffffffffffff
    [ 0.304686] ... max period: 000000007fffffff
    [ 0.304687] ... fixed-purpose events: 3
    [ 0.304688] ... event mask: 000000070000000f
    [ 0.324897] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.351341] Booting Node 0, Processors #1
    [ 0.351348] smpboot cpu 1: start_ip = 99000
    [ 0.464652] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.484623] #2
    [ 0.484627] smpboot cpu 2: start_ip = 99000
    [ 0.597913] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.617876] #3
    [ 0.617880] smpboot cpu 3: start_ip = 99000
    [ 0.741252] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.747769] Brought up 4 CPUs
    [ 0.747775] Total of 4 processors activated (18364.91 BogoMIPS).
    [ 0.750911] devtmpfs: initialized
    [ 0.751676] PM: Registering ACPI NVS region at aaf19000 (847872 bytes)
    [ 0.752391] print_constraints: dummy:
    [ 0.752459] NET: Registered protocol family 16
    [ 0.752545] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.752547] ACPI: bus type pci registered
    [ 0.752684] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
    [ 0.752687] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
    [ 0.768153] PCI: Using configuration type 1 for base access
    [ 0.768569] bio: create slab <bio-0> at 0
    [ 0.770460] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.770465] ACPI: EC: Look up EC in DSDT
    [ 0.772328] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.784480] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.854764] ACPI: SSDT 00000000aadbc718 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
    [ 0.855208] ACPI: Dynamic OEM Table Load:
    [ 0.855210] ACPI: SSDT (null) 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
    [ 0.864674] ACPI: SSDT 00000000aadbda98 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
    [ 0.865144] ACPI: Dynamic OEM Table Load:
    [ 0.865146] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
    [ 0.874544] ACPI: SSDT 00000000aadbbd98 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
    [ 0.874985] ACPI: Dynamic OEM Table Load:
    [ 0.874987] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
    [ 0.894586] ACPI: Interpreter enabled
    [ 0.894589] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.894611] ACPI: Using IOAPIC for interrupt routing
    [ 0.999159] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
    [ 0.999351] ACPI: No dock devices found.
    [ 0.999352] HEST: Table not found.
    [ 0.999355] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.999558] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.999930] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.999932] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.999934] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.999936] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.999938] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.999940] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.999942] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.999944] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    [ 0.999946] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    [ 0.999948] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
    [ 0.999950] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
    [ 0.999961] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
    [ 0.999994] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
    [ 1.000018] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.000021] pci 0000:00:01.0: PME# disabled
    [ 1.000038] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
    [ 1.000048] pci 0000:00:02.0: reg 10: [mem 0xdc400000-0xdc7fffff 64bit]
    [ 1.000055] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.000059] pci 0000:00:02.0: reg 20: [io 0xe000-0xe03f]
    [ 1.000109] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
    [ 1.000132] pci 0000:00:16.0: reg 10: [mem 0xdf00b000-0xdf00b00f 64bit]
    [ 1.000195] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.000200] pci 0000:00:16.0: PME# disabled
    [ 1.000231] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
    [ 1.000253] pci 0000:00:1a.0: reg 10: [mem 0xdf008000-0xdf0083ff]
    [ 1.000326] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.000331] pci 0000:00:1a.0: PME# disabled
    [ 1.000355] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
    [ 1.000371] pci 0000:00:1b.0: reg 10: [mem 0xdf000000-0xdf003fff 64bit]
    [ 1.000426] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.000430] pci 0000:00:1b.0: PME# disabled
    [ 1.000450] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
    [ 1.000513] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.000517] pci 0000:00:1c.0: PME# disabled
    [ 1.000540] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
    [ 1.000603] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.000607] pci 0000:00:1c.1: PME# disabled
    [ 1.000632] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
    [ 1.000695] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.000699] pci 0000:00:1c.3: PME# disabled
    [ 1.000723] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
    [ 1.000785] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.000789] pci 0000:00:1c.5: PME# disabled
    [ 1.000819] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
    [ 1.000841] pci 0000:00:1d.0: reg 10: [mem 0xdf007000-0xdf0073ff]
    [ 1.000914] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.000919] pci 0000:00:1d.0: PME# disabled
    [ 1.000944] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
    [ 1.001066] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
    [ 1.001085] pci 0000:00:1f.2: reg 10: [io 0xe0b0-0xe0b7]
    [ 1.001094] pci 0000:00:1f.2: reg 14: [io 0xe0a0-0xe0a3]
    [ 1.001102] pci 0000:00:1f.2: reg 18: [io 0xe090-0xe097]
    [ 1.001111] pci 0000:00:1f.2: reg 1c: [io 0xe080-0xe083]
    [ 1.001119] pci 0000:00:1f.2: reg 20: [io 0xe060-0xe07f]
    [ 1.001128] pci 0000:00:1f.2: reg 24: [mem 0xdf006000-0xdf0067ff]
    [ 1.001161] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.001165] pci 0000:00:1f.2: PME# disabled
    [ 1.001183] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
    [ 1.001199] pci 0000:00:1f.3: reg 10: [mem 0xdf005000-0xdf0050ff 64bit]
    [ 1.001220] pci 0000:00:1f.3: reg 20: [io 0xe040-0xe05f]
    [ 1.001276] pci 0000:01:00.0: [10de:0df4] type 0 class 0x000300
    [ 1.001284] pci 0000:01:00.0: reg 10: [mem 0xdb000000-0xdbffffff]
    [ 1.001292] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.001301] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 1.001308] pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
    [ 1.001314] pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc07ffff pref]
    [ 1.001346] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.001348] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.001351] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
    [ 1.001354] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.001399] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.001403] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.001407] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
    [ 1.001414] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
    [ 1.001480] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
    [ 1.001508] pci 0000:03:00.0: reg 10: [mem 0xddc00000-0xddc0ffff 64bit]
    [ 1.001612] pci 0000:03:00.0: supports D1
    [ 1.001614] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
    [ 1.001619] pci 0000:03:00.0: PME# disabled
    [ 1.001657] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.001662] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.001666] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
    [ 1.001672] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
    [ 1.001743] pci 0000:04:00.0: [1b73:1000] type 0 class 0x000c03
    [ 1.001766] pci 0000:04:00.0: reg 10: [mem 0xdd200000-0xdd20ffff]
    [ 1.001908] pci 0000:04:00.0: PME# supported from D0 D3hot
    [ 1.001914] pci 0000:04:00.0: PME# disabled
    [ 1.001944] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
    [ 1.001948] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
    [ 1.001952] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
    [ 1.001959] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
    [ 1.002025] pci 0000:05:00.0: [1969:1083] type 0 class 0x000200
    [ 1.002053] pci 0000:05:00.0: reg 10: [mem 0xdc800000-0xdc83ffff 64bit]
    [ 1.002068] pci 0000:05:00.0: reg 18: [io 0x9000-0x907f]
    [ 1.002166] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.002171] pci 0000:05:00.0: PME# disabled
    [ 1.002210] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
    [ 1.002214] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.002219] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
    [ 1.002225] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
    [ 1.002249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 1.002373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 1.002402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 1.002435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 1.002467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 1.002510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGR._PRT]
    [ 1.002545] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 1.002548] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 1.002549] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.700980] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.701022] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
    [ 1.701063] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.701104] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.701146] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.701186] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.701226] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
    [ 1.701264] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
    [ 1.701338] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.701345] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.701347] vgaarb: loaded
    [ 1.701348] vgaarb: bridge control possible 0000:01:00.0
    [ 1.701349] vgaarb: bridge control possible 0000:00:02.0
    [ 1.701410] PCI: Using ACPI for IRQ routing
    [ 1.702943] PCI: pci_cache_line_size set to 64 bytes
    [ 1.703021] reserve RAM buffer: 000000000009e800 - 000000000009ffff
    [ 1.703024] reserve RAM buffer: 00000000aabcc000 - 00000000abffffff
    [ 1.703027] reserve RAM buffer: 00000000aace1000 - 00000000abffffff
    [ 1.703029] reserve RAM buffer: 00000000aacf5000 - 00000000abffffff
    [ 1.703031] reserve RAM buffer: 00000000aaf19000 - 00000000abffffff
    [ 1.703033] reserve RAM buffer: 00000000aaffd000 - 00000000abffffff
    [ 1.703035] reserve RAM buffer: 000000014fe00000 - 000000014fffffff
    [ 1.703130] NetLabel: Initializing
    [ 1.703131] NetLabel: domain hash size = 128
    [ 1.703132] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.703144] NetLabel: unlabeled traffic allowed by default
    [ 1.703158] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.703163] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.705180] Switching to clocksource hpet
    [ 1.707228] Switched to NOHz mode on CPU #0
    [ 1.707282] Switched to NOHz mode on CPU #1
    [ 1.707289] Switched to NOHz mode on CPU #2
    [ 1.707371] Switched to NOHz mode on CPU #3
    [ 1.709995] pnp: PnP ACPI init
    [ 1.710009] ACPI: bus type pnp registered
    [ 1.710231] pnp 00:00: [bus 00-3e]
    [ 1.710233] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.710235] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.710236] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.710238] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.710240] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.710242] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.710243] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.710245] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.710247] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.710248] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.710250] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.710252] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.710253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.710255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.710257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.710258] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.710260] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.710262] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
    [ 1.710264] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 1.710335] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.710347] pnp 00:01: [io 0x0000-0x001f]
    [ 1.710349] pnp 00:01: [io 0x0081-0x0091]
    [ 1.710350] pnp 00:01: [io 0x0093-0x009f]
    [ 1.710351] pnp 00:01: [io 0x00c0-0x00df]
    [ 1.710353] pnp 00:01: [dma 4]
    [ 1.710371] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.710378] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 1.710395] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.710466] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 1.710484] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.710493] pnp 00:04: [io 0x00f0]
    [ 1.710501] pnp 00:04: [irq 13]
    [ 1.710519] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.710528] pnp 00:05: [io 0x002e-0x002f]
    [ 1.710530] pnp 00:05: [io 0x004e-0x004f]
    [ 1.710531] pnp 00:05: [io 0x0061]
    [ 1.710533] pnp 00:05: [io 0x0063]
    [ 1.710534] pnp 00:05: [io 0x0065]
    [ 1.710535] pnp 00:05: [io 0x0067]
    [ 1.710536] pnp 00:05: [io 0x0070]
    [ 1.710538] pnp 00:05: [io 0x0080]
    [ 1.710539] pnp 00:05: [io 0x0092]
    [ 1.710542] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.710544] pnp 00:05: [io 0x0680-0x069f]
    [ 1.710545] pnp 00:05: [io 0x1000-0x100f]
    [ 1.710546] pnp 00:05: [io 0xffff]
    [ 1.710548] pnp 00:05: [io 0xffff]
    [ 1.710549] pnp 00:05: [io 0x0400-0x0453]
    [ 1.710550] pnp 00:05: [io 0x0458-0x047f]
    [ 1.710552] pnp 00:05: [io 0x0500-0x057f]
    [ 1.710553] pnp 00:05: [io 0x164e-0x164f]
    [ 1.710595] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.710598] system 00:05: [io 0x1000-0x100f] has been reserved
    [ 1.710600] system 00:05: [io 0xffff] has been reserved
    [ 1.710601] system 00:05: [io 0xffff] has been reserved
    [ 1.710603] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 1.710605] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 1.710607] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.710609] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.710612] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.710619] pnp 00:06: [io 0x0070-0x0077]
    [ 1.710624] pnp 00:06: [irq 8]
    [ 1.710642] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.710658] pnp 00:07: [io 0x0454-0x0457]
    [ 1.710686] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 1.710689] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.710714] pnp 00:08: [io 0x0060]
    [ 1.710716] pnp 00:08: [io 0x0064]
    [ 1.710721] pnp 00:08: [irq 1]
    [ 1.710741] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 1.710775] pnp 00:09: [irq 12]
    [ 1.710798] pnp 00:09: Plug and Play ACPI device, IDs ETD0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 1.758811] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 1.758813] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
    [ 1.758814] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
    [ 1.758816] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
    [ 1.758817] pnp 00:0a: [mem 0xe0000000-0xe3ffffff]
    [ 1.758819] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
    [ 1.758820] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
    [ 1.758822] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
    [ 1.758824] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 1.758825] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
    [ 1.758827] pnp 00:0a: [mem 0xafa00000-0xafa00fff]
    [ 1.758884] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.758887] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved
    [ 1.758889] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.758891] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.758893] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
    [ 1.758895] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.758897] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.758900] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.758902] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.758904] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.758906] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
    [ 1.758909] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.758934] pnp 00:0b: [mem 0xafa00000-0xafa00fff]
    [ 1.758981] system 00:0b: [mem 0xafa00000-0xafa00fff] has been reserved
    [ 1.758984] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.759078] pnp 00:0c: [mem 0x20000000-0x201fffff]
    [ 1.759080] pnp 00:0c: [mem 0x40000000-0x401fffff]
    [ 1.759131] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.759133] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
    [ 1.759136] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.759147] pnp: PnP ACPI: found 13 devices
    [ 1.759148] ACPI: ACPI bus type pnp unregistered
    [ 1.764848] PCI: max bus depth: 1 pci_try_num: 2
    [ 1.764884] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.764886] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.764889] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
    [ 1.764892] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.764896] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.764899] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.764905] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
    [ 1.764909] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
    [ 1.764916] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.764919] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.764925] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
    [ 1.764929] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
    [ 1.764936] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
    [ 1.764939] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
    [ 1.764944] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
    [ 1.764949] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
    [ 1.764956] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
    [ 1.764959] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.764964] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
    [ 1.764969] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
    [ 1.764983] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.764986] pci 0000:00:01.0: setting latency timer to 64
    [ 1.764993] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.764997] pci 0000:00:1c.0: setting latency timer to 64
    [ 1.765005] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.765010] pci 0000:00:1c.1: setting latency timer to 64
    [ 1.765018] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.765022] pci 0000:00:1c.3: setting latency timer to 64
    [ 1.765028] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.765033] pci 0000:00:1c.5: setting latency timer to 64
    [ 1.765037] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.765039] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.765041] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.765042] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.765044] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.765046] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.765048] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.765050] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.765051] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.765053] pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
    [ 1.765055] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
    [ 1.765057] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 1.765059] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
    [ 1.765061] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.765063] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 1.765064] pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
    [ 1.765066] pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref]
    [ 1.765068] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    [ 1.765070] pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
    [ 1.765072] pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
    [ 1.765074] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    [ 1.765076] pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
    [ 1.765078] pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
    [ 1.765080] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
    [ 1.765081] pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
    [ 1.765083] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
    [ 1.765138] NET: Registered protocol family 2
    [ 1.765319] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.766220] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.767965] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.768183] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.768185] TCP reno registered
    [ 1.768194] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.768216] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.768449] NET: Registered protocol family 1
    [ 1.768464] pci 0000:00:02.0: Boot video device
    [ 2.015314] PCI: CLS 64 bytes, default 64
    [ 2.015352] Unpacking initramfs...
    [ 2.047361] Freeing initrd memory: 2368k freed
    [ 2.047653] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.047657] Placing 64MB software IO TLB between ffff8800a6bcc000 - ffff8800aabcc000
    [ 2.047658] software IO TLB at phys 0xa6bcc000 - 0xaabcc000
    [ 2.048060] audit: initializing netlink socket (disabled)
    [ 2.048068] type=2000 audit(1313603670.739:1): initialized
    [ 2.054235] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.067195] VFS: Disk quotas dquot_6.5.2
    [ 2.067311] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.067454] msgmni has been set to 7745
    [ 2.067640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 2.067672] io scheduler noop registered
    [ 2.067674] io scheduler deadline registered
    [ 2.067711] io scheduler cfq registered (default)
    [ 2.067791] pcieport 0000:00:01.0: setting latency timer to 64
    [ 2.067814] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 2.068084] intel_idle: MWAIT substates: 0x21120
    [ 2.068086] intel_idle: v0.4 model 0x2A
    [ 2.068087] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.068117] ERST: Table is not found!
    [ 2.068163] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.268759] Linux agpgart interface v0.103
    [ 2.268839] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 2.270529] i8042: Detected active multiplexing controller, rev 1.1
    [ 2.271297] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.271322] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 2.271339] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 2.271357] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 2.271374] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 2.271436] mousedev: PS/2 mouse device common for all mice
    [ 2.271488] rtc_cmos 00:06: RTC can wake from S4
    [ 2.271585] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 2.271612] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 2.271729] cpuidle: using governor ladder
    [ 2.271883] cpuidle: using governor menu
    [ 2.272040] TCP cubic registered
    [ 2.272042] NET: Registered protocol family 17
    [ 2.272048] Registering the dns_resolver key type
    [ 2.272116] PM: Hibernation image not present or could not be loaded.
    [ 2.272120] registered taskstats version 1
    [ 2.278319] rtc_cmos 00:06: setting system clock to 2011-08-17 17:54:31 UTC (1313603671)
    [ 2.278398] Initializing network drop monitor service
    [ 2.279674] Freeing unused kernel memory: 712k freed
    [ 2.279759] Write protecting the kernel read-only data: 6144k
    [ 2.279988] Freeing unused kernel memory: 12k freed
    [ 2.282266] Freeing unused kernel memory: 776k freed
    [ 2.291723] udevd[55]: starting version 173
    [ 2.304579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.339771] usbcore: registered new interface driver usbfs
    [ 2.339795] usbcore: registered new interface driver hub
    [ 2.341676] usbcore: registered new device driver usb
    [ 2.342076] SCSI subsystem initialized
    [ 2.346410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.346435] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.346439] libata version 3.00 loaded.
    [ 2.346468] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 2.346474] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 2.346533] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.346567] ehci_hcd 0000:00:1a.0: debug port 2
    [ 2.350464] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.350482] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf008000
    [ 2.361641] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.361880] hub 1-0:1.0: USB hub found
    [ 2.361885] hub 1-0:1.0: 2 ports detected
    [ 2.361969] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 2.362000] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 2.362005] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 2.362014] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.362042] ehci_hcd 0000:00:1d.0: debug port 2
    [ 2.363294] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 2.363343] xhci_hcd 0000:04:00.0: setting latency timer to 64
    [ 2.363348] xhci_hcd 0000:04:00.0: xHCI Host Controller
    [ 2.363358] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
    [ 2.365933] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.365956] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf007000
    [ 2.378294] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.378444] hub 2-0:1.0: USB hub found
    [ 2.378448] hub 2-0:1.0: 2 ports detected
    [ 2.378553] ahci 0000:00:1f.2: version 3.0
    [ 2.378566] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 2.378706] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.378982] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
    [ 2.378987] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
    [ 2.378993] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.385587] scsi0 : ahci
    [ 2.385700] scsi1 : ahci
    [ 2.385786] scsi2 : ahci
    [ 2.385871] scsi3 : ahci
    [ 2.385959] scsi4 : ahci
    [ 2.386043] scsi5 : ahci
    [ 2.386296] ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 41
    [ 2.386298] ata2: DUMMY
    [ 2.386302] ata3: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006200 irq 41
    [ 2.386303] ata4: DUMMY
    [ 2.386304] ata5: DUMMY
    [ 2.386305] ata6: DUMMY
    [ 2.499498] xhci_hcd 0000:04:00.0: irq 19, io mem 0xdd200000
    [ 2.499623] xHCI xhci_add_endpoint called for root hub
    [ 2.499625] xHCI xhci_check_bandwidth called for root hub
    [ 2.499650] hub 3-0:1.0: USB hub found
    [ 2.499655] hub 3-0:1.0: 1 port detected
    [ 2.499701] xhci_hcd 0000:04:00.0: xHCI Host Controller
    [ 2.499707] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
    [ 2.499773] xHCI xhci_add_endpoint called for root hub
    [ 2.499775] xHCI xhci_check_bandwidth called for root hub
    [ 2.499793] hub 4-0:1.0: USB hub found
    [ 2.499799] hub 4-0:1.0: 1 port detected
    [ 2.668242] usb 1-1: new high speed USB device number 2 using ehci_hcd
    [ 2.704896] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.704948] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.706090] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
    [ 2.706102] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 2.706110] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.706942] ata1.00: ATA-8: ST9500423AS, 0002SDM1, max UDMA/133
    [ 2.706951] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 2.708085] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
    [ 2.708096] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 2.708128] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.708250] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
    [ 2.708253] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 2.708256] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.708955] ata1.00: configured for UDMA/133
    [ 2.709184] scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5
    [ 2.710001] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A2ASW, 1.00, max UDMA/100
    [ 2.713629] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
    [ 2.713640] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 2.713648] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.715460] ata3.00: configured for UDMA/100
    [ 2.721215] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A2ASW 1.00 PQ: 0 ANSI: 5
    [ 2.726730] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.726735] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.726769] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.726772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.726796] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.730604] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.730613] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.730825] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 2.744374] sda: sda1 sda2 sda3 sda4
    [ 2.744800] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.792361] hub 1-1:1.0: USB hub found
    [ 2.792438] hub 1-1:1.0: 6 ports detected
    [ 2.898039] usb 2-1: new high speed USB device number 2 using ehci_hcd
    [ 3.022001] hub 2-1:1.0: USB hub found
    [ 3.022058] hub 2-1:1.0: 6 ports detected
    [ 3.047955] Refined TSC clocksource calibration: 2294.788 MHz.
    [ 3.047965] Switching to clocksource tsc
    [ 3.088035] usb 1-1.1: new full speed USB device number 3 using ehci_hcd
    [ 3.154812] usb 1-1.1: device descriptor read/64, error -32
    [ 3.236960] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
    [ 3.236965] PM: Marking nosave pages: 0000000020000000 - 0000000020200000
    [ 3.236973] PM: Marking nosave pages: 0000000040000000 - 0000000040200000
    [ 3.236982] PM: Marking nosave pages: 00000000aabcc000 - 00000000aacdf000
    [ 3.236987] PM: Marking nosave pages: 00000000aace1000 - 00000000aacf4000
    [ 3.236989] PM: Marking nosave pages: 00000000aacf5000 - 00000000aade8000
    [ 3.236994] PM: Marking nosave pages: 00000000aaf19000 - 00000000aafe8000
    [ 3.236998] PM: Marking nosave pages: 00000000aaffd000 - 0000000100000000
    [ 3.238148] PM: Basic memory bitmaps created
    [ 3.256065] PM: Basic memory bitmaps freed
    [ 3.281008] EXT3-fs: barriers not enabled
    [ 3.293754] kjournald starting. Commit interval 5 seconds
    [ 3.293785] EXT3-fs (sda3): mounted filesystem with ordered data mode
    [ 3.408060] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
    [ 4.495259] udevd[256]: starting version 173
    [ 4.578020] ACPI: acpi_idle yielding to intel_idle
    [ 4.627803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 4.627906] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.628446] ACPI: AC Adapter [AC0] (on-line)
    [ 4.629029] ACPI: Lid Switch [LID]
    [ 4.629597] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.629603] ACPI: Sleep Button [SLPB]
    [ 4.629654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.629658] ACPI: Power Button [PWRF]
    [ 4.662098] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.662105] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.670264] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.670270] ACPI: Thermal Zone [TZ00] (58 C)
    [ 4.699183] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 4.699224] sr 2:0:0:0: Attached scsi generic sg1 type 5
    [ 4.735002] wmi: Mapper loaded
    [ 4.816453] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.837422] Linux media interface: v0.10
    [ 4.865736] Linux video capture interface: v2.00
    [ 4.900747] uvcvideo: Found UVC 1.00 device ASUS USB2.0 WebCam (058f:a014)
    [ 4.903658] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
    [ 4.903716] usbcore: registered new interface driver uvcvideo
    [ 4.903718] USB Video Class driver (v1.1.0)
    [ 4.911301] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 4.911316] ath9k 0000:03:00.0: setting latency timer to 64
    [ 4.919790] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 4.919846] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
    [ 4.919869] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 4.927271] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 4.935157] asus_wmi: ASUS WMI generic driver loaded
    [ 4.941164] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 4.943980] asus_wmi: Initialization: 0x1
    [ 4.944133] asus_wmi: SFUN value: 0x1a0af7
    [ 4.945199] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
    [ 4.956683] asus_wmi: Backlight controlled by ACPI video driver
    [ 4.956752] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 4.960798] ath: EEPROM regdomain: 0x60
    [ 4.960800] ath: EEPROM indicates we should expect a direct regpair map
    [ 4.960802] ath: Country alpha2 being used: 00
    [ 4.960803] ath: Regpair used: 0x60
    [ 4.974078] Bluetooth: Core ver 2.16
    [ 4.974096] NET: Registered protocol family 31
    [ 4.974097] Bluetooth: HCI device and connection manager initialized
    [ 4.974098] Bluetooth: HCI socket layer initialized
    [ 4.974099] Bluetooth: L2CAP socket layer initialized
    [ 4.974302] Bluetooth: SCO socket layer initialized
    [ 4.984561] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 4.984762] Registered led device: ath9k-phy0
    [ 4.984768] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005360000, irq=17
    [ 4.999019] iTCO_vendor_support: vendor-support=0
    [ 5.000922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 5.000993] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 5.001120] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 5.013874] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 5.014040] usbcore: registered new interface driver btusb
    [ 5.026354] atl1c 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 5.026365] atl1c 0000:05:00.0: setting latency timer to 64
    [ 5.140660] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
    [ 5.493359] hda_codec: ALC269VB: BIOS auto-probing.
    [ 5.525717] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0
    [ 5.528101] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 5.528163] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 5.528222] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 5.528376] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.528381] mei 0000:00:16.0: setting latency timer to 64
    [ 5.535903] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 5.536243] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
    [ 5.536438] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 5.537725] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 5.537829] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 5.566314] [drm] Initialized drm 1.1.0 20060810
    [ 5.578198] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.578202] i915 0000:00:02.0: setting latency timer to 64
    [ 5.616676] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input10
    [ 5.640873] i915 0000:00:02.0: irq 43 for MSI/MSI-X
    [ 5.640878] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 5.640879] [drm] Driver supports precise vblank timestamp query.
    [ 5.640934] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
    [ 5.641035] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
    [ 5.641105] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 5.641106] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
    [ 5.817467] fbcon: inteldrmfb (fb0) is primary device
    [ 5.981060] Console: switching to colour frame buffer device 170x48
    [ 5.982871] fb0: inteldrmfb frame buffer device
    [ 5.982872] drm: registered panic notifier
    [ 6.010757] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
    [ 6.011024] acpi device:4e: registered as cooling_device4
    [ 6.011185] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
    [ 6.011212] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 6.011736] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
    [ 6.011930] acpi device:59: registered as cooling_device5
    [ 6.012005] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:55/LNXVIDEO:01/input/input12
    [ 6.012073] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
    [ 6.012134] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.806806] EXT3-fs (sda3): using internal journal
    [ 7.032629] EXT3-fs: barriers not enabled
    [ 7.033131] kjournald starting. Commit interval 5 seconds
    [ 7.033638] EXT3-fs (sda4): using internal journal
    [ 7.033650] EXT3-fs (sda4): mounted filesystem with ordered data mode
    [ 7.136750] Adding 2097140k swap on /dev/sda2. Priority:-1 extents:1 across:2097140k
    [ 8.830153] NET: Registered protocol family 10
    [ 9.400174] ehci_hcd 0000:00:1d.0: PCI INT A disabled
    [ 9.400249] ehci_hcd 0000:00:1d.0: PME# enabled
    [ 9.413816] xhci_hcd 0000:04:00.0: PCI INT A disabled
    [ 9.413916] xhci_hcd 0000:04:00.0: PME# enabled
    [ 9.644602] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xdf007000-0xdf0073ff] (PCI address [0xdf007000-0xdf0073ff])
    [ 9.644638] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
    [ 9.644679] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
    [ 9.644796] ehci_hcd 0000:00:1d.0: PME# disabled
    [ 9.644816] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 9.644828] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 9.754551] xhci_hcd 0000:04:00.0: BAR 0: set to [mem 0xdd200000-0xdd20ffff] (PCI address [0xdd200000-0xdd20ffff])
    [ 9.754699] xhci_hcd 0000:04:00.0: PME# disabled
    [ 9.754721] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 9.754736] xhci_hcd 0000:04:00.0: setting latency timer to 64
    [ 9.754760] usb usb3: root hub lost power or was reset
    [ 9.754764] usb usb4: root hub lost power or was reset
    [ 167.112308] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
    [ 167.112437] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
    [ 177.751730] eth0: no IPv6 routers present
    $ dmesg | grep -i input
    [ 2.304579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 4.627803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 4.629597] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.629654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.903658] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
    [ 4.945199] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
    [ 4.956752] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 5.528101] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 5.528163] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 5.528222] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 5.616676] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input10
    [ 6.011185] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
    [ 6.012005] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:55/LNXVIDEO:01/input/input12
    $ cat /sys/class/input/mouse0/device/uevent
    PRODUCT=11/2/1/63
    NAME="PS/2 Logitech Wheel Mouse"
    PHYS="isa0060/serio4/input0"
    PROP=0
    EV=7
    KEY=70000 0 0 0 0
    REL=103
    MODALIAS=input:b0011v0002p0001e0063-e0,1,2,k110,111,112,r0,1,8,amlsfw
    $ cat /var/log/Xorg.0.log
    [ 232.348]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 232.349]
    X.Org X Server 1.10.3.901 (1.10.4 RC 1)
    Release Date: 2011-07-29
    [ 232.349] X Protocol Version 11, Revision 0
    [ 232.349] Build Operating System: Linux 3.0.0-ARCH x86_64
    [ 232.349] Current Operating System: Linux asdfg 3.0-ARCH #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011 x86_64
    [ 232.350] Kernel command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
    [ 232.350] Build Date: 08 August 2011 08:24:13AM
    [ 232.350]
    [ 232.350] Current version of pixman: 0.22.2
    [ 232.350] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 232.350] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 232.351] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 17 19:58:21 2011
    [ 232.397] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 232.406] (==) No Layout section. Using the first Screen section.
    [ 232.406] (==) No screen section available. Using defaults.
    [ 232.406] (**) |-->Screen "Default Screen Section" (0)
    [ 232.406] (**) | |-->Monitor "<default monitor>"
    [ 232.406] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 232.407] (==) Automatically adding devices
    [ 232.407] (==) Automatically enabling devices
    [ 232.464] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 232.464] Entry deleted from font path.
    [ 232.464] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 232.464] Entry deleted from font path.
    [ 232.464] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 232.465] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 232.465] Entry deleted from font path.
    [ 232.465] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 232.465] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 232.465] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 232.465] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 232.465] (II) Loader magic: 0x7d3620
    [ 232.465] (II) Module ABI versions:
    [ 232.465] X.Org ANSI C Emulation: 0.4
    [ 232.465] X.Org Video Driver: 10.0
    [ 232.465] X.Org XInput driver : 12.2
    [ 232.465] X.Org Server Extension : 5.0
    [ 232.466] (--) PCI:*(0:0:2:0) 8086:0116:1043:1662 rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
    [ 232.466] (--) PCI: (0:1:0:0) 10de:0df4:1043:1662 rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
    [ 232.466] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 232.466] (II) LoadModule: "extmod"
    [ 232.498] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 232.500] (II) Module extmod: vendor="X.Org Foundation"
    [ 232.500] compiled for 1.10.3.901, module version = 1.0.0
    [ 232.500] Module class: X.Org Server Extension
    [ 232.500] ABI class: X.Org Server Extension, version 5.0
    [ 232.500] (II) Loading extension MIT-SCREEN-SAVER
    [ 232.500] (II) Loading extension XFree86-VidModeExtension
    [ 232.500] (II) Loading extension XFree86-DGA
    [ 232.500] (II) Loading extension DPMS
    [ 232.500] (II) Loading extension XVideo
    [ 232.500] (II) Loading extension XVideo-MotionCompensation
    [ 232.500] (II) Loading extension X-Resource
    [ 232.500] (II) LoadModule: "dbe"
    [ 232.500] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 232.501] (II) Module dbe: vendor="X.Org Foundation"
    [ 232.501] compiled for 1.10.3.901, module version = 1.0.0
    [ 232.501] Module class: X.Org Server Extension
    [ 232.501] ABI class: X.Org Server Extension, version 5.0
    [ 232.501] (II) Loading extension DOUBLE-BUFFER
    [ 232.501] (II) LoadModule: "glx"
    [ 232.502] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 232.517] (II) Module glx: vendor="X.Org Foundation"
    [ 232.517] compiled for 1.10.3.901, module version = 1.0.0
    [ 232.517] ABI class: X.Org Server Extension, version 5.0
    [ 232.517] (==) AIGLX enabled
    [ 232.517] (II) Loading extension GLX
    [ 232.517] (II) LoadModule: "record"
    [ 232.517] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 232.518] (II) Module record: vendor="X.Org Foundation"
    [ 232.518] compiled for 1.10.3.901, module version = 1.13.0
    [ 232.518] Module class: X.Org Server Extension
    [ 232.518] ABI class: X.Org Server Extension, version 5.0
    [ 232.518] (II) Loading extension RECORD
    [ 232.518] (II) LoadModule: "dri"
    [ 232.519] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 232.536] (II) Module dri: vendor="X.Org Foundation"
    [ 232.536] compiled for 1.10.3.901, module version = 1.0.0
    [ 232

    Interestingly enough, the same thing happens in Windows on my U46E - the Synaptics driver recognizes the touchpad only as a PS/2 mouse and two-finger scroll won't work.
    Edit: The elantech module you posted fixes the problem on the U46E, too. Thanks! Now to fix it for Windows...
    Last edited by kalinatek (2011-08-29 20:13:07)

  • Logitech Touch Mouse App won't work or display cursor on a iOS device running RD Client App

    I was trying to use Logitech Touch Mouse App installed on a iPhone5 as a physical mouse with a RD Client installed on another iPad mini. The host is a NB running Windows 7. The Touch mouse movement is noticeable on the RDC screen on iPad mini, but the cursor
    is missing. It appears the cursor image was blocked by the RDC.
    It would be very helpfull for the RDC running on a iOS device to support this type of WiFi mouse App to enable a physical mouse (through a smart device). I can see many usage models of RD Client with this type of physical mouse feature.

    Hi,
    The version 8.1.3 is released, please update to the latest version and see how it works,
    https://itunes.apple.com/us/app/microsoft-remote-desktop/id714464092
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Logitech Wireless Mouse and MacBook Pro

    Greetings.
    I'm thinking about buying a Logitech wireless mouse for my MacBook Pro. The mouse comes with a USB wireless card. Will I need to use this or will the wireless/bluetooth card in the MacBook pick up the mouse by itself?
    Cheers,
    John

    I don't understand your problem. Is it that you can't see the arrow or what? You say the button and all work fine so I am stumped by your question. I have problems with my mouse being recognized by the MBP but I just turn off mouse, restart laptop then turn on mouse and it comes back up. If I ever put my MBP to sleep I shut the mouse off first and wait until it says mouse disconnected or whatever it says..I can't recall. Then I put the MBP to sleep. Once I wake it up turn mouse back on and voila..works!! Maybe try pushing the little "Connect" button on the bottom of the mouse that might help. I have never tried that but just a suggestion.
    Sorry if this is all confusing.

  • HOWTO: Enabling Forward, Back Buttons, Logitech MX1000 Mouse

    Enabling Forward and Back Buttons, Logitech MX1000 Mouse
    (and Microsoft Wireless Intellimouse Explorer, apparently)
    Step 1: Get, Install evdev
    ==========================
    First, use evdev as the Xorg mouse driver.
    Get this module, install it, and make sure it is loaded each time you run Linux.
    For Arch, this means:
    # pacman --sync xf86-input-evdev
    and adding "evdev" to the modules list in /etc/rc.conf.
    Step 2: Modify xorg.conf to Use evdev as Your Mouse Driver
    ==========================================================
    Next, in /etc/X11/xorg.conf, create an evdev-based input device that specifies your mouse:
    # evdev based section for Logitech MX1000 mouse
    Section "InputDevice"
    Identifier "Evdev Mouse"
    Driver "evdev"
    Option "Name" "Logitech USB Receiver"
    Option "CorePointer"
    EndSection
    Note: then "Name" field above is important. Find out the name for your device via:
    % egrep "Name|Handlers" /proc/bus/input/device
    In the case of the Logitech MX1000 mouse, which is wireless, it is: "Logitech USB Receiver".
    Step 3: Modify Xorg ServerLayout to Use Your evdev Mouse
    ========================================================
    Now modify the Xorg server layout to use this mouse entry:
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Evdev Mouse" "CorePointer"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    EndSection
    Step 4: Do Some Button Mapping for The Forward and Back Buttons
    ===============================================================
    Now, add the following to your .xinitrc, or somewhere where it will be executed each time X starts:
    % xmodmap -e "pointer = 1 2 3 4 5 8 9 6 7"
    You will receive the warning:
        Warning: Only changing the first 9 of 20 buttons.
    Don't worry about this - it is normal.
    Finally, to get those pesky Forward and Back buttons working in some Gnome apps such as Nautilus,
    get and install xvkbd and xbindkeys. Now create file ~/.xbindkeysrc, containing:
    # Mouse Buttons
    "/usr/bin/xvkbd -xsendevent -text "\[Alt_L]\[Left]""
    m:0x0 + b:6
    "/usr/bin/xvkbd -xsendevent -text "\[Alt_L]\[Right]""
    m:0x0 + b:7
    "/usr/bin/xvkbd -xsendevent -text "\[Left]""
    m:0x0 + b:8
    "/usr/bin/xvkbd -xsendevent -text "\[Right]""
    m:0x0 + b:9
    and add the following to your .xinitrc, or somewhere where it will be executed each time X starts:
    % xbindkeys
    That is it! Simple n'est pas? :-)
    Many, many thanks to Arch forum member MrWeatherbee, who provided most of the key elements of the above - thanks!
    Last edited by mac57 (2007-08-20 14:46:29)

    Hi Misfit138, I agree that the general ideas are there already in the Wiki, but even after reading that entry, I was not able to get things working. The existing entry is not specific enough to the MX1000 mouse. So, although I have never contributed to a Wiki before, I think it is likely a good idea to do so in this case. I will make sure that the entry is very MX1000 specific. It will address a small audience, but it is one way of giving back a little to the community.

  • [Solved] Touchpad recognized as Logitech Wheel Mouse

    I am trying to get my touchpad working on an Acer Aspire TimelineX AS4830T-6642 but the touchpad is being recognized as a "Logitech Wheel Mouse".
    I am unsure if the laptop is using an Elantech or Synaptics touchpad as it only seems to see the touchpad as a regular pointer. I have attached output that I think could be relevant. Let me know if anything else would be helpful.
    Dmesg Output
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 04)
    00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b4)
    00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b4)
    00:1c.2 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 3 (rev b4)
    00:1c.3 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 4 (rev b4)
    00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
    00:1f.2 SATA controller: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
    00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 04)
    02:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0)
    03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
    04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
    05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
    xinput -list output
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ PS/2 Logitech Wheel Mouse id=12 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Power Button id=8 [slave keyboard (3)]
    ↳ Sleep Button id=9 [slave keyboard (3)]
    ↳ 1.3M HD WebCam id=10 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
    Last edited by BHoward (2011-08-13 00:31:16)

    I have found a kernel patch at https://bugzilla.kernel.org/show_bug.cgi?id=27442 that is suppose to fix the problem. Can anyone help guide me on patching the Arch kernel? I have installed ABS and created a build directory. Need some help with the pkgbuild though.

  • [Solved] Elan touchpad wrongly recognized as PS/2 Logitech Wheel Mouse

    In my Samsung QX310 I have an Elan multitouch touchpad. It's recognized (by kernel? xorg? udev?) as PS/2 Logitech Wheel Mouse and it works as one (no scrolling, multitouch, etc.)
    options psmouse force_elantech=1
    in psmouse.conf in /etc/modprobe.d/ doesn't help
    sudo rmmod psmouse && sudo modprobe psmouse force_elantech=1
    don't change anything
    In my case modprobe psmouse doesn't react to any arguments, every time it loads PS/2 Logitech Wheel Mouse. There aren't any errors in dmesg either.
    I have xf86-input-synaptics and even xf86-input-multitouch-git installed.
    I have also tried many combinations in /etc/X11/xorg.conf.d/10-synaptics.conf but I think the main problem is here
    $ xinput list
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ PS/2 Logitech Wheel Mouse id=13 [slave pointer (2)]
    Is there any option to force psmouse (modprobe?) to load Elantech driver?
    This should be solved in kernel 2.6.34 (I have 2.6.37.5) but apparently something is wrong with my configuration. Any guesses?
    Edit:
    It seems psmouse can't recognize newer elan touchpads. Here are the bug reports
    https://bugzilla.kernel.org/show_bug.cgi?id=27442
    https://bugs.launchpad.net/ubuntu/+sour … bug/681904
    I have forced psmouse to use elantech protocol (by changing psmouse.c) but touchpad didn't work at all, so for now everybody with elan smart-pad (almost every newer samsung notebook) are stuck without scrolling and multitouch.
    Edit Solved, the proper patch is at https://bugzilla.kernel.org/show_bug.cgi?id=27442
    Last edited by einhard (2011-04-27 16:37:22)

    Take a look at this thread and my last post, I have AUR and binary package: https://bbs.archlinux.org/viewtopic.php … 25#p973025

  • Touchpad detected as ImPS/2 Logitech Wheel Mouse

    I have an Asus laptop (not an eee pc), and my touchpad is detected incorrectly.  It thinks it is a "ImPS/2 Logitech Wheel Mouse."  I have tried to use the synaptics driver by configuring /etc/hal/fdi/policy/11-x11-synaptics.fdi
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <deviceinfo version="0.2">
    <device>
    <match key="info.product" contains="ImPS/2 Logitech Wheel Mouse">
    <append key="info.capabilities" type="strlist">input.touchpad</append>
    </match>
    <match key="info.capabilities" contains="input.touchpad">
    <merge key="input.x11_driver" type="string">synaptics</merge>
    <merge key="input.x11_options.SHMConfig" type="string">true</merge>
    <merge key="input.x11_options.TapButton1" type="string">1</merge>
    <merge key="input.x11_options.TapButton2" type="string">2</merge>
    <merge key="input.x11_options.TapButton3" type="string">3</merge>
    </match>
    </device>
    </deviceinfo>
    but this causes the touchpad to stop working entirely.  Here is the relevant section of my Xorg.0.log
    (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event7"
    (**) Option "SHMConfig" "true"
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) ImPS/2 Logitech Wheel Mouse: no supported touchpad found
    (EE) ImPS/2 Logitech Wheel Mouse Unable to query/initialize Synaptics hardware.
    (EE) PreInit failed for input device "ImPS/2 Logitech Wheel Mouse"
    (II) UnloadModule: "synaptics"
    also here is the incorrect entry from /proc/bus/input/devices
    I: Bus=0011 Vendor=0002 Product=0005 Version=0063
    N: Name="ImPS/2 Logitech Wheel Mouse"
    P: Phys=isa0060/serio4/input0
    S: Sysfs=/devices/platform/i8042/serio4/input/input7
    U: Uniq=
    H: Handlers=mouse1 event7
    B: EV=7
    B: KEY=70000 0 0 0 0
    B: REL=1036
    Is there some way I can let my system know that this is indeed a touchpad so I can configure it properly?

    I can't really gather anything useful from dmesg.  Here's the possibly relevant output:
    $ dmesg | grep -i input
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
    input: Asus Laptop extra buttons as /devices/virtual/input/input6
    input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input7
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input8
    $ dmesg | grep -i logitech
    input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input7
    $ dmesg | grep -i -C 3 touchpad
    asus-laptop: K40IN model detected
    asus-laptop: Brightness ignored, must be controlled by ACPI video driver
    input: Asus Laptop extra buttons as /devices/virtual/input/input6
    Registered led device: asus::touchpad
    usb 1-5: new high speed USB device using ehci_hcd and address 2
    ACPI: Battery Slot [BAT0] (battery present)
    i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4d00
    There's nothing about synaptics anywhere.
    Is there anything potentially useful here?

  • Touchpad recognized as PS/2 Logitech Wheel Mouse

    Hi,
    So far I have been unable to get to work the touchpad in my ASUS R510L (or X550LD). The touchpad is recognized as a mouse, the output of xinput list is:
    $ xinput list
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ PS/2 Logitech Wheel Mouse id=14 [slave pointer (2)]
    ⎜ ↳ USB_PS2 Optical Mouse id=11 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Video Bus id=8 [slave keyboard (3)]
    ↳ Sleep Button id=9 [slave keyboard (3)]
    ↳ USB2.0 HD UVC WebCam id=10 [slave keyboard (3)]
    ↳ Asus WMI hotkeys id=12 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=13 [slave keyboard (3)]
    Following the wiki, first I installed the psmouse-alps-driver from the AUR, it didn't worked. Then I tried the psmouse-elantech and it also didn't work.
    I also tried the module psmouse-alpsv7-driver by he1per (https://github.com/he1per/psmouse-dkms-alpsv7) but didn't help. Of course I tried the modules having the previous one uninstalled and the default psmouse module reloaded. The touchpad is always recognized as a mouse (Either PS/2 Logitech Wheel Mouse, or Ps/2 Generic Mouse or Elantech mouse).
    I keep getting this error constantly in dmesg, but I think it is a consequence rather than the source of the error:
    psmouse serio4: Failed to enable mouse on isa0060/serio4
    So I keep the module psmouse unloaded. I'm using the kernel 3.14.2-1. Of course the synaptic driver never gets to load, I tried to forced it in the Xorg configuration but it didn't help.
    Running hwinfo ith the psmouse module loaded gives:
    $ hwinfo
    PS/2 00.0: 10500 PS/2 Mouse
    [Created at input.249]
    Unique ID: AH6Q.U5GX9Ignjc0
    Hardware Class: mouse
    Model: "PS/2 Logitech Wheel Mouse"
    Vendor: 0x0002
    Device: 0x0001 "PS/2 Logitech Wheel Mouse"
    Compatible to: int 0x0210 0x0003
    Device File: /dev/input/mice (/dev/input/mouse1)
    Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event15, /dev/input/by-path/platform-i8042-serio-4-event-mouse, /dev/input/by-path/platform-i8042-serio-4-mouse
    Device Number: char 13:63 (char 13:33)
    Driver Info #0:
    Buttons: 3
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
    Config Status: cfg=new, avail=yes, need=no, active=unknown
    Without psmouse loaded it recognizes it also recognizes it as a PS/2 Logitech Wheel Mouse.
    Does anyone know what else can I try?
    Thanks in advance!

    Hi, I just found this Launchpad bug:
    https://bugs.launchpad.net/ubuntu/+sour … ug/1325881
    Is for Ubuntu 14.04, but seems to be the same bug I've got. It also affects other Asus models. So far I haven't found the problem.

Maybe you are looking for

  • How can I convert an OVM vm (.img) to VDI (virtualbox)?

    Hi, how can I convert an OVM vm (.img) to VDI (virtualbox)? Is .img format a raw image? If yes can I use "VBoxManage convertdd" to convert from .img to vdi? tnx & regards, S.

  • The difference between photoshop eps and illustrator eps

    Before installing snow leopard, Quark Xpress could distinguish between photoshop eps and illustrator eps files when a file needed to be modified. Now all it does is open files in only one item of software (depending on which you have told it to open

  • Waterfall Graphs in Obiee 11.1.1.5

    Hi, We are looking to implement waterfall graph in obiee 11.5 , it looks like it is included in 11.6 (though not supported by oracle), any workaround to implement it in 11.1.1.5 ? Regards,

  • Encrypting a Hard Drive

    I recently bought a Lexar 16Gb Express Card SSD drive and have Chronosync copying my local Documents folder to it. I would like to encrypt the drive, but don't want to use any third party software (ie: no TrueCrypt). In Disk Utility, I only see optio

  • FCP Disappeared. Icon now a penical and paper which wont open.

    I was using final cut pro x along with having open numerous web pages, etc. Then, of course, there was a great FCP X moment, it closed out. Then when I went to the toolbar to reopen it, the icon had changed to a penicl and paper. Now I cannot open FC