Logitech mouse software not working

Hey guys I just updated my osx to 10.7.1, and now My logitech control center software doens't seem to be working. I have a VX revolution mouse and I downloaded the latest software they have on logitech's website. When I open it up however, it gives me a screen where I can customize my mouse, but it doesnt let me do anything. Any ideas?
When ever click in that right window, nothing happens.

Yes, that's the page.
Do you have any other mouse-control software, like Steermouse? They will fight for control.
When there's no specific problem, I always run maintenance and cache-clearing routines. Use Cocktail, Onyx, Lion Cache Cleaner. Often, the problems go away after these routines.
I also rebuild my disk directory with Disk Warrior or Tech Tool Pro 6. You could also check your disk with Disk Utility.
In sum, from my experience, there's no inherent problem running the Logitech software (3.4) under Lion. I have had no problems whatsoever. So you have some sort of conflict with something in your system, or a corrupted file in a cache, or a glitch in your disk directory—these general maintenance and cache-clearing routines will improve the general health of your disk and system and should get you back on track with Logitech.

Similar Messages

Logitech mouse buttons not working in photoshop cc 2014

logitech mouse buttons not working in photoshop cc 2014 winds 8.1. Is this a common problem?
I have updated the latest drivers and have a few buttons programmed with keyboard shortcuts that used to work in previous versions of Photoshop but don't work now.
Scrolling with mouse in bridge stopped working in cc butI see it is now working.
any ideas?

Many Photoshop extensions are not compatible with Photoshop CC 2014 for Adobe removed support for Flash Panels in CC 2014. Many extensions panels are flash based. Check with the developer to see if their blendmein extension works with CC 2014.
Adobe does not maintain Photoshop so it backward compatible with prior versions of Photoshop. This brakes things like action scripts plugins extensions etc. Keep old version of Photoshop installed....

APPLE mouse & keyboard not working with Windows (Bootcamp)

I installed Leopard and Windows XP on my Mac Pro. The installation went very smoothly. Only problem I have is that my Apple wireless keyboard and mouse do not work on Windows (frozen) although they work fine on Leopard. I tried a Logitech wireless trackball and it works fine on both Windows and Leopard. Any suggestion?

Thanks. I upgraded from Tiger and downloaded Bootcamp from Leopard Installation disc ( I did not have a beta version ). I then installed Windows XP SP2 ( brand new, just bought for that purpose ). Wonder if Mac wireless keyboard and mouse are compatible with Window. Everything else work beyond my expectation.

After Kernel Update (2.6.38.3-1) mouse is not working anymore

I updated the kernel to version 2.6.38.3-1 via pacman. Since then my usb mouse (Logitech G500) is not working anymore.
lsusb recognizes the mouse as connected, but it does not show up on "xinput list".
How can I track down the problem to its source?

Hello,
Probably related to udev 167.
See this post and my bug report : https://bbs.archlinux.org/viewtopic.php?id=117274
Regards.

My logitech mic does not work with Audition anymore

My Logitech mic does not work with Audition anymore. I had to reformat my hard drive and re install Audition, it is not working any more, I have test the mic with another software and it work fine. help please.

Fixed. Switched card into different slot, not sure exactly what made it work, but it does now.
Go ahead and delete thread if you like.

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?, USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ? Anyone can help me plz?

Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

USB mouse does not work

hi All
I bought a new HP laptop few days ago,when I installed Win7 pro on it after a few minutes, the usb mouse stopped working. Its light still lights up ,but the cursor does not react. The drivers of the device are installed and working properly. the mouse will
not work until I click "scan for hardware changes"in Device Management . but when I restart the computer, it happend again . but win7 home edition seems does not have this problem. please help. thanks

Hi,
I suggest updating the latest BIOS and chipset from HP site, then reinstalling USB controllers to check the result. If any USB hub is used, please bypass it.
http://blogs.technet.com/b/asiasupp/archive/2010/11/23/error-message-one-of-the-usb-device-attached-to-this-computer-has-malfunctioned-and-windows-does-not-recognise-it.aspx
Also, please perform
clean boot, disable your antivirus and firewall
temporarily to avoid any blocking. If the issue persists in clean boot, test the issue in Safe Mode and Device Clean boot.
Device Clean Boot
1. Go to Device Manager
2. Expand "Sound, video and game controllers".
3. Right Click on Audio device and choose disable.
4. Please use the same method to disable other dubious hardware such as: internal modem, and CD-R drive. Please note some devices such as video adapter are not available
to be disabled.
5. After that, restart the computer and then test the issue. If it does not occur, you can enable the device one by one to narrow down this issue.
After you found the device that causing the problem, you can resolve by installing last driver or replacing the device.
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Multi scanner software not working after E71 FW U...

Multi scanner software not working after E71 FW Update to 3.1

Nice bit of trouble-shooting. Thanks for sharing the final solution.

External mouse scrolling not working

The scrolling function of my external mouse does not work when the MacBook Pro is not plugged in with its powercord. The mouse buttons seem to be functioning. So does as an external keyboard. My wife has the same problem (using 10.6.2 OS). There are no options in the System Preferences that deal with this. Is this just an oversight by Apple? This basically makes using an external keyboard and mouse a nonviable option for a laptop unless you are near an electric outlet. If you know of a workaround I would appreciate the information. If not, it is something Apple will have to correct as it a pretty obvious oversight.
Thanks in advance for any advice.
Tony

Check your settings when it is unplugged to make sure they are still properly configured. You might even want to try and disable the trackpad when a mouse is being used. I would also check out USB Overdrive (Shareware).

My wireless keyboard and mouse do not work on my All-In-One computer?

Q.: My wireless keyboard and mouse do not work on my All-In-One computer?
A.: If your wireless keyboard and mouse do not work even after changing the batteries, please try re-syncing them by following these steps.
1. Make sure the computer is on, plug in the USB receiver. Push the button on the USB receiver until it flashes blue.
2. While the receiver is still flashing, press the red connect button on the keyboard (Make sure the batteries are installed). The USB receiver should stop flashing after pressing the button on the keyboard. It may take up to 8 seconds to sync.
3. Repeat the same process for the mouse. Push the button on the USB receiver, then press the connect button on the mouse (Make sure the mouse is on).
Note: This applies to all MSI All-In-One computers that include the ES500W wireless keyboard and SW130 mouse.

"This machine has an added 4 USB ports, could this be causing a problem?
It definitely could be the source of the problem. Perhaps the PCI card was bumped loose during shipping?
Have you tried removing the card? That's where I would start.
Keep us posted.

Mouse is not working properly on a one month old HP Pavillion 15-NO28US

I'm sure it's already been talked about on here, but I haven't found a successful fix or the same exact problem as I'm having. I went thru the latest Windows 8.1 update recently (at least I think it was the update) and when I restarted my computer yesterday the mouse was not working properly. Like a lot of other people who are complaining about it, the two-finger scrolling and other similar features are not working, but what really bothers me is the the mouse is almost acting like it was changed to a left handed mouse. I've checked the settings and it is still set on right-handed, but when I click the left mouse button the small window opens up next to where I clicked, which has the copy, delete and paste options (and other regular options) in it. When I click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I downloaded and install the latest synaptic drivers and nothing happened. I even performed a system recovery last night to reset all setting and it's still not working. This really sucks because I've only had this computer for about a month and I've already lost everything I've put on it...most importantly all of my school work and music apps. Is there anything to fix this or can anyone tell me what's going on with this stuff, before I have to call into HP and have a melt down?

Hi Kevin3047,
Thank you for your query, I will do my best to assist you!!
I understand that after updating from Windows 8 to 8.1 your mouse is not performing correctly. You have tried the built in troubleshooter but to no avail.
You checked the settings and they appear ok, but when you click the left mouse button the small window opens up next to where you clicked, which has the copy, delete and paste options (and other regular options) in it. When you click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I grasp that you did a recovery but it did not help. You also stated you lost your data once, and that in itself is extremely aggravating, I agree.
Here is a step that may help.
Go to the Command Prompt and right click on it to run as Administrator
type sfc /scannow and press enter. This will scan for corrupted files and try to repair them.
Here are links to two documents that may aid with this process.
Troubleshooting Mouse Problems (Windows 8)
Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
Would you also please try a clean boot to see if it persists. Here is a Windows document to assist you.
How to perform a clean boot in Windows
If none of this has alleviated the issue, I suggest you do a Refresh Your PC to Resolve Problems (Windows 8).
If the issue still pesists, I would do a recovery again. You will be prompted during the recovery to backup your personal files to prevent data loss. I would suggest you choose yes, to prevent data loss.
Performing an HP System Recovery (Windows 8)
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
This will take it back to factory. Here is a document on Updating Windows 8 to 8.1 to assist you with doing the update again.
If you are still experiencing the issue, as @visruth stated I would contact HP support for assistance. They are able to remotely log onto your system to help with this difficulty.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Good Luck!!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

PS/2 Mouse does not work anymore

I was playing Halo on WinXP and I had to switch my wireless mouse with a wired mouse because I was not getting a good response out of it. When I wanted to switch back the mouse did not work. I tried a number of different mice and none of them work. If I use a USB mouse it will work in the USB port. This causes a problem for when I am running Linux on my machine.
My question is, are there any known problems with the PS/2 mouse port on the SIS 645DX Chipset board (645E Max Series).
OR
Has anybody had a similar problem to this?
I searched the posts but there were quite a few on this board. Too many even after I filtered out junk.
Thanks a bunch guys.

Well it turns out that I needed to reboot with the mouse plugged in. That was an easy fix. I can't believe I didn't do that.
Side note, Why do you say it is bad for me to have the receiver on the top of the computer? Is there some interferenece?
Thanks for the help.
Roderic J

Wireless mouse does not work

my wireless mouse batteries formed buildup around them. Now my mouse does not work, is there a way to make it work after this happens?

When checking your mouse or keyboard batteries, assuming the mouse is paired.
Turn off the device.
Remove the batteries,
Thoroughly clean the terminals both inside the battery compartment and on the batteries themselves.
Replace or renew the batteries.
Turn on the device. You should get a steady green light if the devices are paired.
Click the mouse twice to activate it.
Whether you use regular or rechargeable batteries you should buy the best. Discounted or unbranded batteries are likely to give a depleted performance and may be of irregular size, often leading to connection problems. Apple’s own brand, Duracell, Energiser and appear to be the best.

My apple mouse is not working. The pointer will not move on the screen and it keeps turning off.

My apple mouse is not working. I can get it to connect but it will not move the pointer. Left and right click is working, scrolling, just cannot move the pointer. Also, I have replaced the batteries (numerous times) but the green power light turns off after a few minutes. Any suggestions?

How about clean up LED hole of mouse?

When i install the new os my fcp,motion and many adobe software not working so please help me out.

when i install the new os my fcp,motion and many adobe software not working so please help me out.
there are so many videos on youtube but i want know any solution from apple side plz my so many works are pending becuze i am working as Video Editor.

You need to be more specific about which software applications you're using, the versions and what happens when you try to open them.
It would also be nice if you could include which model MacBook Air you're using.
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Logitech mouse software not working

Similar Messages

Maybe you are looking for