Logitech QuickCam Communicate STX

My parents have an old Logiteck QuickCam, like I use, but the video doesn't always work and then when it does sometimes the picture is very dark.
I bought them a Logitech QuickCam Communicate STX. My folks have a Mac Mini running 10.3.9.
I knew I would have to find a work around. I vaguely remembered doing that when we first set ours up almost 4 years ago. I just checked on my 10.3.9 and cannot find Macam or iUSB Cam on my computer so am not sure if I will need it for them.
I think I downloaded Macam for them. What should I see as the download from macam?
I also downloaded the iUSB Cam.
The camera did not work.
Found this site, but want to know if you think this will do it?
http://www.macosxhints.com/article.php?story=20030711094946105
I am not at my parents' house now, but will be later this week. As my father is quite ill it would give me great comfort to be able to iChat with them when I am not there.
Thanks for any help you can offer.
Margi

Ok
Margi and I have Text Chatted.
The old camera she has has produces a Dark pic.
The New one need the macam Driver and iUSBCam but still has problems with the drivers in place for the old camera it seems.
We have set the modem to do UPnP.
It is a EmbarQ Zyxel 660 and we have set iChat to us port 443.
We have made sure that System Preferences > Quicktime is set to 1.5Mbps for the streaming.
The Panther Firewall has been tried On, with ports set, and Off.
The macam driver has been removed.
Currently she can get a pic although dark in Preview but for some reason she is not able to connect.
I have a Panther Boot disk and can Video from there to Leopard on my MacBook Pro so I know iChat 2 to iChat 4 works.
I have currently suggested she brings her own camera and see if it produces an better pic next time she visits her dad.
I have also suggested she brings both her own Panther Install Disks and the Camera Install Disk as she can not find her father's
Camera is Enabled in the Video menu and Show Video Status in the View menu.
MacJanitor has been run.
Computer has been restarted doing PRAM reset.
I have a vague feeling I have missed something
I also feel something is up with either the camera or the OS.
8:44 PM Saturday; July 19, 2008

Similar Messages

Logitech QuickCam Communicate Deluxe with webcam 2200

I thought I was getting a good deal on the Logitech QuickCamm Communicate Deluxe but after going to its website, I don't know if I should open it, because it doesn't look like it is compatible with my Mac G4 running Tiger. It says it works with windows live messenger, and I may be able to download that. Has anyone used this webcam with the mac successfully? Would it work with ichat?
Thanks

I'm new to the discussion groups. How do I find that area to post into? Thanks,

Logitech Communicate STX w/ Macam Software

hi,
I am new at ichat. I have a logitech webcam (quickcam communicate stx) that’s run on macam software. it work perfectly on yahoo messenger and skype. but ichat said I have no camera in my mac mini. how can I make ichat recognize my webcam. please help. many thanks.
JVale
Mac Mini OS X 10.4.11
1.25 GHhz PowerPC G4
256 MB RAM
cache 512 KB

Hi Steve,
Thanks for your respond.
If you talking about the iChat IM itself - the video icon is not responding and on iChat Preferences>Video the video “frame’ have ‘There is no camera attached to this computer’ written on it. The iSight help link is all about iSight which my camera is not. I got a Logitech Communicate STX with Macam driver. It work good on Yahoo messenger and on Skype. As you know there is no voice chat for Mac on Yahoo IM. And with Skype the video takes over the power and makes the audio very bad.
Anyhow. I used the iChat yesterday for the very first time and I discover to my dismay that the audio is not working even though my Logitech headset is showing in Preferences>Video. My relative and I (me mac iChat, her pc Aim) keep accepting each other invite but iChat/AIM keep saying we both decline!
Reading the forum today it’s clear that video and audio is always a problem on iChat. I was hoping I could do both video and audio on iChat but obviously it’s impossible to happen. I don’t think it's worth the worry as it doesn’t seem have any solution to the problem. i just go back to skype for voice chat and yahoo for video.
Many thanks anyway.
JVale

Logitech Quickcam drivers for Leopard?

Hi All,
I have searched everywhere for help with drivers including Logitech, Apple Forums, Web and have found nothing. I have a Logitech QuickCam® Communicate™ I was running it on a Windows machine; I would like to use it with my new Mac mini that I just upgraded to Leopard, I bought it on the 16th of October with Tiger pre-installed (the Logitech Mac drivers v.8.0.1 did not work with Tiger either).
Any help would be appreciated, thanks!

I'm wondering what the status of Logitech support for Mac is now. In the Apple Store in Troy, a Logitech QuickCam Ultra Vision MP (there may be the words "Special Edition" in there too, I'll have to check) is being sold, with a Mac approval logo on it. It is being sold as being for Mac.
I can find no mention of this edition of the camera on the Logitech site, and only one on Apple Store website. I need to check and see if it has any special software to work with the Mac.
I have seen other mentions of Logitech web cameras working on the Mac, at the Logitech site; they say it will have basic features provided by the native OS X driver for webcams--sight and sound--but not any of the advanced features, like RightLight 2, RightSound, face tracking, and video effects.
So I would wonder if there's really anything different about the "Made for Mac" camera and the Windows camera. My bet is that there isn't. (The Apple Store has the black SE version of the camera hardware; the white and silver QuickCam Ultra Vision and the black SE are the same in specs, I believe they're identical save for the cosmetics.)

Logitech Quickcam Vision Pro as a Flash webcam?

I need a webcam for my Mac Pro. I'm currently running Leopard but plan to upgrade to Snow Leopard soon. I'm looking at the Logitech Quickcam Vision Pro, but I've read reviews that say it works well in applications like iChat and Skype, but isn't recognized as a webcam by Adobe Flash Player for use on Flash chat websites like tinychat.com and stickam.com. I really need a webcam that is recognized and compatible with Flash Player.
Can anyone with a Logitech Quickcam Vision Pro confirm whether it works through Flash player on sites like tinychat or stickam? If not, can anyone recommend a webcam that works well on a Mac for Flash-driven sites like these?

Here is the list :
Reference: Logitech Webcams for Macintosh (OSX)
Question
In order to use a a webcam on your Mac OS X computer, your Logitech camera must be UVC (Universal Video Class) compliant. These standard UVC drivers are provided by the operating system and will provide minimal camera support only. This allows your webcam to operate on your Mac using third party Instant Messenging applications such as Yahoo IM and MSN. There is no support for other applications such as iMovie or Final Cut Pro.
Currently, Logitech does not provide additional webcam software drivers for Macintosh to allow advanced features such as RightLight, RightSound or Video Effects.
For updates on compatibility issues and driver support, please continue to check the Logitech Support Website for updates or click the "Notify me by E-Mail..." button located at the end of this article.
Answer
This article applies to the following products:
All UVC-compliant Webcams listed in the table below
This article applies to the following operating systems / platforms:
Macintosh OS X 10.4.9 - 10.5.2
The Logitech webcams listed below are UVC compliant and can be used with operating systems which fully support this standard, including Mac OS 10.4.9 and above.
Camera Name P/N
QuickCam Ultra Vision SE 860-00023
QuickCam Ultra Vision 861238
QuickCam Sphere MP 861305
QuickCam Fusion 861304
QuickCam Pro 5000 861306
QuickCam Pro 9000 861464
QuickCam Pro for Notebooks 860-000026
QuickCam for Notebooks Pro 861303
QuickCam Communicate MP (S5500) 860-000106
QuickCam Communicate Deluxe (S7500) 860-000107
QuickCam Communicate Deluxe 861235
QuickCam Deluxe for Notebooks 860-000009
QuickCam Sphere AF 860-000063

Webcam: Logitech QuickCam Vision Pro

OS: latest Lion 10.7.2
Issues:
The above webcam no longer has an audio channel when recording is done using the QuickTime application.
Switching over to the latest iMovie '11, when I click on the camcorder icon, it says "No camera connected"
Going to AboutThisMac>MoreInfo>Hardware>USB>LogitechCamera> says it is recognized by the OS at the device level.
Any ideas what is going on?

Here is the list :
Reference: Logitech Webcams for Macintosh (OSX)
Question
In order to use a a webcam on your Mac OS X computer, your Logitech camera must be UVC (Universal Video Class) compliant. These standard UVC drivers are provided by the operating system and will provide minimal camera support only. This allows your webcam to operate on your Mac using third party Instant Messenging applications such as Yahoo IM and MSN. There is no support for other applications such as iMovie or Final Cut Pro.
Currently, Logitech does not provide additional webcam software drivers for Macintosh to allow advanced features such as RightLight, RightSound or Video Effects.
For updates on compatibility issues and driver support, please continue to check the Logitech Support Website for updates or click the "Notify me by E-Mail..." button located at the end of this article.
Answer
This article applies to the following products:
All UVC-compliant Webcams listed in the table below
This article applies to the following operating systems / platforms:
Macintosh OS X 10.4.9 - 10.5.2
The Logitech webcams listed below are UVC compliant and can be used with operating systems which fully support this standard, including Mac OS 10.4.9 and above.
Camera Name P/N
QuickCam Ultra Vision SE 860-00023
QuickCam Ultra Vision 861238
QuickCam Sphere MP 861305
QuickCam Fusion 861304
QuickCam Pro 5000 861306
QuickCam Pro 9000 861464
QuickCam Pro for Notebooks 860-000026
QuickCam for Notebooks Pro 861303
QuickCam Communicate MP (S5500) 860-000106
QuickCam Communicate Deluxe (S7500) 860-000107
QuickCam Communicate Deluxe 861235
QuickCam Deluxe for Notebooks 860-000009
QuickCam Sphere AF 860-000063

Help- Using IChat 4.0.5 with Logitech QuickCam Vision Pro w/Mac Pro 10.5.4

Our only child just went away to college, so we bought a Logitech QuickCam Vision Pro because it was supposed to be plug and play. He has a MacBook with the built-in iSight camera. We have a Mac Pro, so had to buy something in order to be able to communicate using visual/audio over iChat. I chose the Logitech QuickCam Vision Pro because it was made specifically for Macs and was supposed to be plug and play. It had good ratings, as well, and since the original iSight camera wasn't available anymore...
We tried communicating tonight, and he couldn't see us at all, but could sometimes hear us. We could see him, but not hear him at all. Both of us are on broadband connections. He is using Tiger and we're using Leopard.
So, I tried communicating with a friend using a G5 Mac who had an iSight camera and running Leopard. She was able to see and hear me, but I could only see her, not hear her. We went through all my preference settings, using text messaging, and they all seemed to be fine. She suggested that I call Logitech, which I did.
The guy I spoke with at Logitech had me go through all my settings, and he said they were fine. It appears that the camera is sending video and audio, but I can only receive video, but not audio. I tried using headphones, internal speakers, and external speakers (plugged into the headphone jack). No joy.
Any eye deers?

Hi
First have you set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps
In ichats prefs click on video and change bandwidth limit to 500.
Restart iChat.
Tony

USB device (Logitech QuickCam Messenger) stopped working (SOLVED)

Hey there,
I have a logitech quickcam messenger, which used to work perfectly 2 days ago. I updated my system yesterday and this morning, but I tried the cam again only now, and neither cheese nor webcamstudio work anymore (it never worked in skype since I moved from Mint to Arch a few weeks ago, but that was easily (and better) addressed by starting cheese and then using desktop sharing in Skype)
The webcam is recognized
sammy@Cosmic-Bandito ~$ lsusb
Bus 001 Device 007: ID 046d:08da Logitech, Inc. QuickCam Messanger
Bus 001 Device 006: ID 056a:00d4 Wacom Co., Ltd
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB [Hama]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 046d:c513 Logitech, Inc. MX3000 Cordless Desktop Receiver
Bus 002 Device 002: ID 046d:c51a Logitech, Inc. MX Revolution/G7 Cordless Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/dev/video and /dev/video0 are created.
cheese only shows a black window and spits out :
sammy@Cosmic-Bandito ~/Videos/Webcam$ cheese
libv4l2: error turning on stream: Input/output error
webcamstudio hangs when I try to start the preview and its output is :
libv4l2: error turning on stream: Input/output error
USB Camera (046d:08da) Error: BaseSrc: [v4l2src0],5, Error starting streaming on device '/dev/video0'.
EDIT: that's the output of dmesg when I reconnect the webcam (after having disconnected it obviously) :
[ 2216.282753] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0010
[ 2216.283231] hub 1-1:1.0: port 4, status 0101, change 0001, 12 Mb/s
[ 2216.387861] hub 1-1:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
[ 2216.450867] usb 1-1.4: new full speed USB device using ehci_hcd and address 11
[ 2216.462234] hub 1-1:1.0: port 4 not reset yet, waiting 10ms
[ 2216.537006] usb 1-1.4: ep0 maxpacket = 8
[ 2216.538992] usb 1-1.4: skipped 4 descriptors after interface
[ 2216.538994] usb 1-1.4: skipped 2 descriptors after interface
[ 2216.538996] usb 1-1.4: skipped 1 descriptor after endpoint
[ 2216.538998] usb 1-1.4: skipped 2 descriptors after interface
[ 2216.539000] usb 1-1.4: skipped 1 descriptor after endpoint
[ 2216.539006] usb 1-1.4: udev 11, busnum 1, minor = 10
[ 2216.539008] usb 1-1.4: New USB device found, idVendor=046d, idProduct=08da
[ 2216.539010] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2216.539081] usb 1-1.4: usb_probe_device
[ 2216.539084] usb 1-1.4: configuration #1 chosen from 1 choice
[ 2216.539364] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[ 2216.539400] zc3xx 1-1.4:1.0: usb_probe_interface
[ 2216.539402] zc3xx 1-1.4:1.0: usb_probe_interface - got id
[ 2216.539404] gspca: probing 046d:08da
[ 2217.384009] zc3xx: probe 2wr ov vga 0x0000
[ 2217.407008] zc3xx: probe sensor -> 0011
[ 2217.407010] zc3xx: Find Sensor HV7131R(c)
[ 2217.407304] input: zc3xx as /devices/pci0000:00/0000:00:0b.1/usb1/1-1/1-1.4/input/input14
[ 2217.407372] gspca: video0 created
[ 2217.407374] gspca: found int in endpoint: 0x82, buffer_len=8, interval=10
[ 2217.407381] usb 1-1.4: link qh8-0601/f6f9e240 start 5 [1/2 us]
[ 2217.407401] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
[ 2217.407438] zc3xx 1-1.4:1.1: usb_probe_interface
[ 2217.407441] zc3xx 1-1.4:1.1: usb_probe_interface - got id
[ 2217.407443] gspca: probing 046d:08da
[ 2217.407455] snd-usb-audio 1-1.4:1.1: usb_probe_interface
[ 2217.407458] snd-usb-audio 1-1.4:1.1: usb_probe_interface - got id
[ 2217.410813] usb 1-1.4: adding 1-1.4:1.2 (config #1, interface 2)
[ 2217.410855] drivers/usb/core/inode.c: creating file '011'
EDIT 2: Just tried the webcam on another computer, and it works there. so it's not the hardware
any ideas? I'm pretty desperate, as this is the only way for me to keep in touch with my kids at the moment
Last edited by SammyF (2010-05-28 20:44:15)

SOLVED : really stupid problem, but well... I'll completement my post and leave it for anybody who might hit the same problem :
dmesg looked like this when after I started cheese :
[ 3815.848011] usb 1-1.4: unlink qh8-3008/ec236980 start 0 [1/2 us]
[ 3815.848995] gspca: found int in endpoint: 0x82, buffer_len=8, interval=10
[ 3815.849001] usb 1-1.4: link qh8-0601/f6848ec0 start 1 [1/2 us]
[ 3816.696230] zc3xx: probe 2wr ov vga 0x0000
[ 3816.917369] ehci_hcd 0000:00:0b.1: iso sched full f0049c00 (now 652 max 2700)
[ 3816.917377] gspca: bandwidth not wide enough - trying again
[ 3816.938010] gspca: no transfer endpoint found
The (not so obvious) solution was to connect the webcam directly to the computer and not through a USB hub. I have no idea why it used to work and suddenly stopped, but it works again now.
sorry to take up your time, in case I did.
Last edited by SammyF (2010-05-28 20:44:56)

JMF crashed with Logitech QuickCam Pro for Notebook using latest driver.

JMF crashed with Logitech QuickCam Pro for Notebook using latest driver
I can't register the webcam in JMF. WinXP crashed with Blue-screen-of-dead.
The crash occurs on installation of JMF when the installer tries to detect my capture devices.
Windows also crashes when i open the JMF Registry Editor and tell it to search for my capture devices.
I use a QuickCam Pro for Notenooks with driver version 11.80.1065.0000 on Windows XP with JMF 2.1.1e.
PS: I can use JMF to connect to other brand's webcam.
So, how to solve it?

So, how to solve it?JMF apparently doesn't work with that camera...so if you want to install JMF, you should unplug your Logitech cam. If that doesn't work, uninstall it.

Logitech Quickcam Pro 9000

Logitech Quickcam Pro 9000
This is a great cam, and now supported through the use of the UVC standard, but the most FPS I get out of it is around 5 frames per second....It's capable of up to 30 though.
I tried recording a video through the quicktime player in high definition. It defaulted to 1600x1200, and I still only 5fps. So my guess is that iChat is using the highest resolution setting and scaling it down to 320x240.
Any ideas?

I just bought this camera from Best Buy for my mother for Christmas.
I tried it out on my PM G5 (which already has an iSight plugged in) and I was BLOWN AWAY by the picture quality as my wife and I tested out the iChat AV video chat features with this and my MacBook's built in iSight.
So next I tried it out on my iBook 900mhz G3. Making sure that I was up to 10.4.11, I plugged it in andI thought everything was good.... at first. I got a picture but it was much smaller and surrounded by a black border. When I initiated a video chat that's where I saw a problem with the webcam connected to a G3 iBook. Whenever there was any motion on the cam we got a lot of pink horizontal distortion bars on screen. After pondering it I firmly believe it has to do with the G3 processor. When I hook it up to my mother's G4 eMac, I will let you guys know if that fixed it. Granted if you think about it, back when iChat AV first came out, in 2003 you could hook up a digital camcorder to a G4 but not a G3 and use that as your web cam.
But to all those out there that maybe are graphics pros with Power Mac G5's or Mac Pro's and need a web cam, I have to recommend this camera! My wife and I are seriously thinking about putting our iSight up on eBay and getting the going rate of $200 for it and replacing it with one of these Pro 9000's. Not a bad investment in 2003 when I bought it though huh?!

Logitech Quickcam Messenger no dice

So I have this logitech quickcam messenger, and suprise, its not working.
Anyway, i plug it in (USB), and several modules load, /dev/video0 is created, but other than that, no functionality.
Mostly when i try to run any video app I get (running motion):
[1] Failed to open video device /dev/video0: Device or resource busy
I can run cat /dev/video0 and get a lot of output streaming out, so thats a good sign. But I wonder is the device really busy or is the driver screwed up?
I'm using the quickcam_messenger module that autoloads when i plug it in.
I've also tried qcmessenger and gspca_zc3xx modules to no avail.
output of lsmod:
Module Size Used by
quickcam_messenger 14480 0
usbvideo 24196 1 quickcam_messenger
compat_ioctl32 8960 1 usbvideo
videodev 33920 2 usbvideo,compat_ioctl32
v4l1_compat 13828 1 videodev
it87 24216 0
hwmon_vid 3712 1 it87
ext3 122128 1
jbd 48552 1 ext3
mbcache 8708 1 ext3
xfs 473616 1
joydev 12784 0
snd_usb_audio 89392 0
snd_usb_lib 16896 1 snd_usb_audio
snd_rawmidi 21408 1 snd_usb_lib
usbhid 43344 0
hid 33412 1 usbhid
ff_memless 6024 1 usbhid
running standard arch kernel 2.6.27 and yes my user is in the video group
I've searched google quite a bit and i've run out of ideas...so any help would be much appreciated!
Last edited by Evanlec (2008-10-30 00:24:18)

Old topic, but case is up to date.
I was struggling with my own older Logitech camera Quickcam Pro. Apparently I bought the wrong one, but finally I set it up with limited functionality.
Of course the problem was the driver. No pwc, no linux-uvc and not even spca5xx. I had to compile new driver module with nw802. Actually mine was nw801, but I just had to edit one file before compilation, apply some patches, insert this module and now it works.
Please do some researches and specify correct driver for your webcam using ProductID. Logitech webcams have varied set of drivers. :-)

Using Logitech QuickCam Pro for Notebooks with Mac..

Can I install the Logitech QuickCam Pro for Notebooks(new version) on my G4 Powerbook(OSX 4.11) ? I have read several posts from Mac people saying that this is possible BUT is there a CD included with the installation AND does that CD only work for the PC software ?
Would like to know before purchasing....
Thanks

I read Logitech's data page on this cam but it does not mention anything about Mac compatible although the info I saw from some Mac people suggested that that might be some silent agreement between them and the PC people.....
Here's the article I read under: http://www.ecamm.com/mac/ichatusbcam/configs.html scrolled down to the Logitech data and found this under the QuickCam Pro for Notebooks:
Logitech QuickCam for NoteBooks PRO (New Version)
Important Note: Logitech Compatibility Information
The following Logitech QuickCams are currently available in two versions. Only the newer version is Mac-compatible (UVC compliant) (Unless otherwise noted.).
* QuickCam for NoteBooks PRO
* QuickCam Orbit MP/Sphere
* QuickCam PRO 5000
* QuickCam Ultra Vision
* QuickCam Fusion
Identifying the newer revision cameras:
The new models are labeled with the "Works with Windows Vista" logo, and also feature "RightLight 2" as one of the features.
Part Number (P/N): The compatible model/part numbers are listed on our camera guide. Unfortunately, the part number can only be found by opening the box.
Logitech provides the following table showing the new vs. old camera models. The cameras marked as "UVC Supt" are Mac-compatible.
Model: V-UAR38 861303-0000)
PID: 0x08CB Built-in Driver (Requires Mac OS X 10.4.3 or higher)
iUSBCam is not required for Mac OS X 10.4.9 or higher

Quick Capture and iChat AV do not recognize the Logitech QuickCam

I use Tiger system, and iChatAV and Quick Capture do not recognize Logitech QuickCam for Notebooks Pro. Is it supposed to?? The camera is on, everything connected up OK, but no results.

You may find more users familiar with this problem in the iChat AV forum.
Do you have a G3 Dual USB iBook? That is the forum in which you have posted.

Installation of Logitech QuickCam Pro 9000 on iBook G4 (MAC OS X 10.3.9)

Hi iBook friends,
I am writing from Munich, Germany. I just got my first webcam and I am a bit lost...
I got the Logitech QuickCam Pro 9000 and I have no idea how to install it...
Can somebody give me a hand?
Thank you very much!

Hi, this is a relatively good webcam but on a Mac, some of the features will not function without software. First of all, the software for this cam is written for PC only, but the camera will operate pretty well without it.
You will need to upgrade to OS X 10.4.9 or higher, or download and install "ichatUSBCam" at this link... http://www.macupdate.com/info.php/id/12294
10.4.9 and 10.4.10 will recognize the cam natively.
All the cool features like snapshots, auto-focus, face tracking, etc... will not be available without the PC only software. I contacted Logitech about the auto-focus not working and they told me that the Pro 9000 has internal hardware that requires software control.
I have found the focus to not be a problem as almost everything is in focus anyway.
This cam is very sharp, very high resolution and auto-exposure and color balance seem to work great.
Hope this helps,
Pete

Logitech Quickcam Vision MP for Mac not completely working

Hi,
I got a Logitech Quickcam Vision Mp for Mac from an Apple store, but it's not completely working.
It works fine for iChat and Skype. However i doesn't work at all for iMovie, it says there is no camera atached, and it kind of works for Photo Booth. The problem is that I also have an EyeTv Hybrid, and
when it is connected, Photo Booth doesn't recognize my web cam at all. I get a black screen. If
the EyeTv Hybrid is not connected, then Photo Booth recognizes the web cam, but if I try to record
I only get video and no sound. Any suggestions? Is there a web cam that works for all the applications: iMovie, iChat, Photo Booth? If I got one of those old external iSight cameras that Apple doesn't sell anymore, would it work with my new intel Mac running Leopard?
Thank you very much in advance!

Hi,
I just purchased and connected my camera, also from the Apple store, and it works just find with Photo Booth and iChat. As for the sound issue, make sure that you've selected the "Logitech Camera" selection from within the Sound option under System Preference. Click the Input button to make your selection. I hope this resolved your issue.
Good luck!!!

Logitech QuickCam Communicate STX

Similar Messages

Maybe you are looking for