Logitech Quickcam Fusion

Hi, I'm new to the boards. I just bought the Logitech quickcam Fusion (new uvc compliant). I have a new mac pro running 10.4.10. I tried using ichat but it would not recognize the microphone on the camera. Only have options for line in and digital in. Frustrated, I plugged the camera into my Powerbook G4 (running 10.4.9) and it worked perfectly with ichat. Any ideas on why Mac Pro won't recognize the mic? Kind of frustrating since this is the cam Apple sells on the store. Thanks in advance!

This is crap ... they should patch 10.4.10 to fix the microphone problem ... I have a quickcam ultra vision and the mic of course does not work since upgrading the OS.
I hav eto use my headset for it to work. Its bad enough that apple does not work with Logitech on the drivers since canceling the production on the iSight .... but to not patch a major USB bug is simply unforgivable.
In general I have loved my switch to Mac from PC over the past year ... but this is the kind of issue I feared would haunt my decision.
D

Similar Messages

Audigy problem with Logitech QuickCam Fusion Driv

The new Logitech QuickCam Fusion camera driver software somehow causes the 4. and 5. to get messed on my Windows XP (sp2) computer.
I spent a long time tracking the problem down including swapping out the Audigy itself, testing speakers on another computer, reinstalling creative drivers, bios, board drivers, etc. It didn't dawn on me that the Logitech driver would ever cause that kind of problem, so it was the last thing I checked.
It causes the front speaker sounds to come out the rear speakers and the rear and center channels to get whisper quiet. And, all sounds come out of all of the speakers somewhat.
Removing the QuickCam Fusion web camera driver instantly corrects the problem.
I would like to know if others who have the Audigy, Audigy 2, and X-Fi have the same problems after installing the Logitech Fusion Web Cam.
Could one of the Creative forum monitors kindly would check out this problem?
Thanks
JN

One thing you might try to see if this corects the problem is to look in your control panel, and then sound, and there have you checked to be sure that the sound card and not the Logtiech Quick Cam is the default sound device? I know that some of those devices have their own microphone and codecs and those become the default after you install them. It will make the camera the default sound device. Sometimes they even plug into your "line-in" though not always.
Cheers,
jmacguire

Equium A60 doesn't work properly with Logitech Quickcam Fusion

Has anyone managed to use a Logitech Quickcam Fusion webcam with an Equium A60 ?
I've installed the latest available drivers and software and most times it just screws up the operation of the PC. It eventually hangs so badly that I can't even recover using Windows Task Manager!! If I leave the USB lead connected to the PC, 9 times out of ten, it won't boot up into Windows, until I remove the lead :(
I've installed the same software and drivers on my Desktop PC and the camera works fine every time and boots OK with the camera connected to a USB port.
Both PCs are using Win XP with SP2 and all released updates.

Hello Bill
Do you have problems with USB ports if you use other devices? I really don?t know what the problem can be. Check Logitech SUPPORT PAGE
Maybe you will find some advice there.

Since last update, sound on my Logitech Quickcam fusion stopped working?

In iChat ,I noticed that since the last apple software update the sound on my Quickcam Fusion stopped working only the video works.. I noticed that under preferences, video, then microphone, it is no longer listed as a USB device option. Only line-in is present.
I suspect it has something to do with the last software update from Apple. I think the details had mentioned that they changed something with USB security??
I would like this camera to work since I just bought it and it was working 2 weeks ago!
Thanks for any help.
Mini Mac OS X (10.4.10) latest version of iChat AV

New Audio Update toady for me.
Although this was on my MacBook Pro that I have just reinstalled the OS on.
(I can not find it in downloads. Strangely it has appeared after the 10.4.10 combo Update)
It may also pay to start up GarageBand odd as it sounds.
Also go to Applications/Utilities and open the MIDI Utility and make sure the setting is set to 44100
10:06 PM Monday; July 2, 2007

Logitech QuickCam madness.

Hello, I've two webcams connected to my computer.
One of those is the built-in iSight, and the other one is a Logitech QuickCam Fusion. `ls /dev/ | grep video` actually reports two: video and video1. `lsusb` does also detect the webcam: "Bus 001 Device 002: 046d:08c1 Logitech Inc, QuickCam Fusion", but no luck at all.
But Cheese does only detect (and actually works) my iSight.
Any ideas?
EDIT!
dmesg says:
uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c1)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
uvcvideo: Failed to query (129) UVC probe control : -110 (exp. 26).
uvcvideo: Failed to initialize the device (-5).
14:3:3: cannot set freq 1600 to ep 0x86
Last edited by jdiez (2009-09-12 13:46:15)

The UVC driver site http://linux-uvc.berlios.de/ states the 046d:08c1 Logitech Quickcam Fusion has the following two issues.
1 First and second generation Logitech webcams suffer from firmware bug which make the camera somehow unstable.
As the issue is timing-related, the exact impact of the bug on a particular user can't be predicted.
If you plan to buy a Logitech webcam, consider getting one of the models not affected by the bug.
More information about the issue, including possible workarounds, are available on the QuickCam Team website.
2 Starting at version 2.6.22, the Linux kernel includes a USB audio bug fix which triggers a (possibly identical to the above)
bug in first and second generation Logitech webcams. See the Linux UVC wiki for a workaround.
You may have some luck trying the workarounds listed on the Linux Quickcam Team web site http://www.quickcamteam.net/documentati … tibilities and the Linux UVC Wiki http://openfacts.berlios.de/index-en.ph … =Linux_UVC.

Help using mic on Quickcam Fusion

Hello All,
I'm trying to figure out if there's any way I can get the microphone to work on a Logitech Quickcam Fusion. I'm successfully using the camera with iChat by way of iChatUSB and an IOXperts beta driver. The IOXperts driver does allow me to access most of the settings and adjustments on the camera but iChat just doesn't recognize that the camera has a mic. I tried to get help from the guy at IOXperts, but he has a bit of an attitude problem when answering questions (or ignoring them as is most usually the case). In one message he stated that the camera declares itself as 'audio class compliant'. But what that means to me and how I'm supposed to get it to be recognized is a mystery.
If anyone has any suggestions, I would greatly appreciate it. And, yes, I'm aware that OS 10.4.9 adds USB camera functionality, but this version of the Fusion is not one that it supports, unfortunately.
Thanks,
Chris

Hi Chris,
It seems that the Fusion is one of those that can be OS 10.4.9 (USB Video Classs) compliant or not depending on serial number.
See here http://en.wikipedia.org/wiki/Listof_USB_video_classdevices
Now this would mean that it may work if the iChatUSBCam utility is disabled.
This also means deleting com.apple.ichat.plist as this stores the Camera/Utility info.
The same is true of the ioxperts drivers
5:10 PM Wednesday; May 30, 2007

Logitech Quickcam Vision Pro as a Flash webcam?

I need a webcam for my Mac Pro. I'm currently running Leopard but plan to upgrade to Snow Leopard soon. I'm looking at the Logitech Quickcam Vision Pro, but I've read reviews that say it works well in applications like iChat and Skype, but isn't recognized as a webcam by Adobe Flash Player for use on Flash chat websites like tinychat.com and stickam.com. I really need a webcam that is recognized and compatible with Flash Player.
Can anyone with a Logitech Quickcam Vision Pro confirm whether it works through Flash player on sites like tinychat or stickam? If not, can anyone recommend a webcam that works well on a Mac for Flash-driven sites like these?

Here is the list :
Reference: Logitech Webcams for Macintosh (OSX)
Question
In order to use a a webcam on your Mac OS X computer, your Logitech camera must be UVC (Universal Video Class) compliant. These standard UVC drivers are provided by the operating system and will provide minimal camera support only. This allows your webcam to operate on your Mac using third party Instant Messenging applications such as Yahoo IM and MSN. There is no support for other applications such as iMovie or Final Cut Pro.
Currently, Logitech does not provide additional webcam software drivers for Macintosh to allow advanced features such as RightLight, RightSound or Video Effects.
For updates on compatibility issues and driver support, please continue to check the Logitech Support Website for updates or click the "Notify me by E-Mail..." button located at the end of this article.
Answer
This article applies to the following products:
All UVC-compliant Webcams listed in the table below
This article applies to the following operating systems / platforms:
Macintosh OS X 10.4.9 - 10.5.2
The Logitech webcams listed below are UVC compliant and can be used with operating systems which fully support this standard, including Mac OS 10.4.9 and above.
Camera Name P/N
QuickCam Ultra Vision SE 860-00023
QuickCam Ultra Vision 861238
QuickCam Sphere MP 861305
QuickCam Fusion 861304
QuickCam Pro 5000 861306
QuickCam Pro 9000 861464
QuickCam Pro for Notebooks 860-000026
QuickCam for Notebooks Pro 861303
QuickCam Communicate MP (S5500) 860-000106
QuickCam Communicate Deluxe (S7500) 860-000107
QuickCam Communicate Deluxe 861235
QuickCam Deluxe for Notebooks 860-000009
QuickCam Sphere AF 860-000063

Webcam: Logitech QuickCam Vision Pro

OS: latest Lion 10.7.2
Issues:
The above webcam no longer has an audio channel when recording is done using the QuickTime application.
Switching over to the latest iMovie '11, when I click on the camcorder icon, it says "No camera connected"
Going to AboutThisMac>MoreInfo>Hardware>USB>LogitechCamera> says it is recognized by the OS at the device level.
Any ideas what is going on?

Here is the list :
Reference: Logitech Webcams for Macintosh (OSX)
Question
In order to use a a webcam on your Mac OS X computer, your Logitech camera must be UVC (Universal Video Class) compliant. These standard UVC drivers are provided by the operating system and will provide minimal camera support only. This allows your webcam to operate on your Mac using third party Instant Messenging applications such as Yahoo IM and MSN. There is no support for other applications such as iMovie or Final Cut Pro.
Currently, Logitech does not provide additional webcam software drivers for Macintosh to allow advanced features such as RightLight, RightSound or Video Effects.
For updates on compatibility issues and driver support, please continue to check the Logitech Support Website for updates or click the "Notify me by E-Mail..." button located at the end of this article.
Answer
This article applies to the following products:
All UVC-compliant Webcams listed in the table below
This article applies to the following operating systems / platforms:
Macintosh OS X 10.4.9 - 10.5.2
The Logitech webcams listed below are UVC compliant and can be used with operating systems which fully support this standard, including Mac OS 10.4.9 and above.
Camera Name P/N
QuickCam Ultra Vision SE 860-00023
QuickCam Ultra Vision 861238
QuickCam Sphere MP 861305
QuickCam Fusion 861304
QuickCam Pro 5000 861306
QuickCam Pro 9000 861464
QuickCam Pro for Notebooks 860-000026
QuickCam for Notebooks Pro 861303
QuickCam Communicate MP (S5500) 860-000106
QuickCam Communicate Deluxe (S7500) 860-000107
QuickCam Communicate Deluxe 861235
QuickCam Deluxe for Notebooks 860-000009
QuickCam Sphere AF 860-000063

LogiTech QuickCam webcam does not create /dev/video0

I have followed the Arch Webcam Wiki, and read numerous posts to get my QuickCam working and I can not seem to get it to create the /dev/video0 .
dmesg sees that it is connected:
usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
I am using the spca5xx driver which I got from http://mxhaard.free.fr/spca5xx.html and I was able to compile and install it with no problem.
lsmod | grep spca shows:
lsmod | grep spca
spca5xx 672208 0
videodev 7808 1 spca5xx
usbcore 113796 3 uhci_hcd,spca5xx
lsusb shows:
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 046d:092e Logitech, Inc.
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc.
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
I tried recompiling the kernel as it was suggested in a few of the WebCam posts in this forum but I still do not get /dev/video0. Any ideas??
Thank you.

Thanks for your help. I took the webcam back and exchanged it for a QuickCam Fusion. This cam uses the the USB Video class drivers available at http://linux-uvc.berlios.de/ and I was able to get the webcam to work, but only in Ekiga, no other apps support it at this time. I will just wait until applications are updated and support it.
Thank you.[/url]

Using Logitech QuickCam Pro for Notebooks with Mac..

Can I install the Logitech QuickCam Pro for Notebooks(new version) on my G4 Powerbook(OSX 4.11) ? I have read several posts from Mac people saying that this is possible BUT is there a CD included with the installation AND does that CD only work for the PC software ?
Would like to know before purchasing....
Thanks

I read Logitech's data page on this cam but it does not mention anything about Mac compatible although the info I saw from some Mac people suggested that that might be some silent agreement between them and the PC people.....
Here's the article I read under: http://www.ecamm.com/mac/ichatusbcam/configs.html scrolled down to the Logitech data and found this under the QuickCam Pro for Notebooks:
Logitech QuickCam for NoteBooks PRO (New Version)
Important Note: Logitech Compatibility Information
The following Logitech QuickCams are currently available in two versions. Only the newer version is Mac-compatible (UVC compliant) (Unless otherwise noted.).
* QuickCam for NoteBooks PRO
* QuickCam Orbit MP/Sphere
* QuickCam PRO 5000
* QuickCam Ultra Vision
* QuickCam Fusion
Identifying the newer revision cameras:
The new models are labeled with the "Works with Windows Vista" logo, and also feature "RightLight 2" as one of the features.
Part Number (P/N): The compatible model/part numbers are listed on our camera guide. Unfortunately, the part number can only be found by opening the box.
Logitech provides the following table showing the new vs. old camera models. The cameras marked as "UVC Supt" are Mac-compatible.
Model: V-UAR38 861303-0000)
PID: 0x08CB Built-in Driver (Requires Mac OS X 10.4.3 or higher)
iUSBCam is not required for Mac OS X 10.4.9 or higher

USB device (Logitech QuickCam Messenger) stopped working (SOLVED)

Hey there,
I have a logitech quickcam messenger, which used to work perfectly 2 days ago. I updated my system yesterday and this morning, but I tried the cam again only now, and neither cheese nor webcamstudio work anymore (it never worked in skype since I moved from Mint to Arch a few weeks ago, but that was easily (and better) addressed by starting cheese and then using desktop sharing in Skype)
The webcam is recognized
sammy@Cosmic-Bandito ~$ lsusb
Bus 001 Device 007: ID 046d:08da Logitech, Inc. QuickCam Messanger
Bus 001 Device 006: ID 056a:00d4 Wacom Co., Ltd
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB [Hama]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 046d:c513 Logitech, Inc. MX3000 Cordless Desktop Receiver
Bus 002 Device 002: ID 046d:c51a Logitech, Inc. MX Revolution/G7 Cordless Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/dev/video and /dev/video0 are created.
cheese only shows a black window and spits out :
sammy@Cosmic-Bandito ~/Videos/Webcam$ cheese
libv4l2: error turning on stream: Input/output error
webcamstudio hangs when I try to start the preview and its output is :
libv4l2: error turning on stream: Input/output error
USB Camera (046d:08da) Error: BaseSrc: [v4l2src0],5, Error starting streaming on device '/dev/video0'.
EDIT: that's the output of dmesg when I reconnect the webcam (after having disconnected it obviously) :
[ 2216.282753] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0010
[ 2216.283231] hub 1-1:1.0: port 4, status 0101, change 0001, 12 Mb/s
[ 2216.387861] hub 1-1:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
[ 2216.450867] usb 1-1.4: new full speed USB device using ehci_hcd and address 11
[ 2216.462234] hub 1-1:1.0: port 4 not reset yet, waiting 10ms
[ 2216.537006] usb 1-1.4: ep0 maxpacket = 8
[ 2216.538992] usb 1-1.4: skipped 4 descriptors after interface
[ 2216.538994] usb 1-1.4: skipped 2 descriptors after interface
[ 2216.538996] usb 1-1.4: skipped 1 descriptor after endpoint
[ 2216.538998] usb 1-1.4: skipped 2 descriptors after interface
[ 2216.539000] usb 1-1.4: skipped 1 descriptor after endpoint
[ 2216.539006] usb 1-1.4: udev 11, busnum 1, minor = 10
[ 2216.539008] usb 1-1.4: New USB device found, idVendor=046d, idProduct=08da
[ 2216.539010] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2216.539081] usb 1-1.4: usb_probe_device
[ 2216.539084] usb 1-1.4: configuration #1 chosen from 1 choice
[ 2216.539364] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[ 2216.539400] zc3xx 1-1.4:1.0: usb_probe_interface
[ 2216.539402] zc3xx 1-1.4:1.0: usb_probe_interface - got id
[ 2216.539404] gspca: probing 046d:08da
[ 2217.384009] zc3xx: probe 2wr ov vga 0x0000
[ 2217.407008] zc3xx: probe sensor -> 0011
[ 2217.407010] zc3xx: Find Sensor HV7131R(c)
[ 2217.407304] input: zc3xx as /devices/pci0000:00/0000:00:0b.1/usb1/1-1/1-1.4/input/input14
[ 2217.407372] gspca: video0 created
[ 2217.407374] gspca: found int in endpoint: 0x82, buffer_len=8, interval=10
[ 2217.407381] usb 1-1.4: link qh8-0601/f6f9e240 start 5 [1/2 us]
[ 2217.407401] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
[ 2217.407438] zc3xx 1-1.4:1.1: usb_probe_interface
[ 2217.407441] zc3xx 1-1.4:1.1: usb_probe_interface - got id
[ 2217.407443] gspca: probing 046d:08da
[ 2217.407455] snd-usb-audio 1-1.4:1.1: usb_probe_interface
[ 2217.407458] snd-usb-audio 1-1.4:1.1: usb_probe_interface - got id
[ 2217.410813] usb 1-1.4: adding 1-1.4:1.2 (config #1, interface 2)
[ 2217.410855] drivers/usb/core/inode.c: creating file '011'
EDIT 2: Just tried the webcam on another computer, and it works there. so it's not the hardware
any ideas? I'm pretty desperate, as this is the only way for me to keep in touch with my kids at the moment
Last edited by SammyF (2010-05-28 20:44:15)

SOLVED : really stupid problem, but well... I'll completement my post and leave it for anybody who might hit the same problem :
dmesg looked like this when after I started cheese :
[ 3815.848011] usb 1-1.4: unlink qh8-3008/ec236980 start 0 [1/2 us]
[ 3815.848995] gspca: found int in endpoint: 0x82, buffer_len=8, interval=10
[ 3815.849001] usb 1-1.4: link qh8-0601/f6848ec0 start 1 [1/2 us]
[ 3816.696230] zc3xx: probe 2wr ov vga 0x0000
[ 3816.917369] ehci_hcd 0000:00:0b.1: iso sched full f0049c00 (now 652 max 2700)
[ 3816.917377] gspca: bandwidth not wide enough - trying again
[ 3816.938010] gspca: no transfer endpoint found
The (not so obvious) solution was to connect the webcam directly to the computer and not through a USB hub. I have no idea why it used to work and suddenly stopped, but it works again now.
sorry to take up your time, in case I did.
Last edited by SammyF (2010-05-28 20:44:56)

JMF crashed with Logitech QuickCam Pro for Notebook using latest driver.

JMF crashed with Logitech QuickCam Pro for Notebook using latest driver
I can't register the webcam in JMF. WinXP crashed with Blue-screen-of-dead.
The crash occurs on installation of JMF when the installer tries to detect my capture devices.
Windows also crashes when i open the JMF Registry Editor and tell it to search for my capture devices.
I use a QuickCam Pro for Notenooks with driver version 11.80.1065.0000 on Windows XP with JMF 2.1.1e.
PS: I can use JMF to connect to other brand's webcam.
So, how to solve it?

So, how to solve it?JMF apparently doesn't work with that camera...so if you want to install JMF, you should unplug your Logitech cam. If that doesn't work, uninstall it.

Logitech Quickcam Pro 9000

Logitech Quickcam Pro 9000
This is a great cam, and now supported through the use of the UVC standard, but the most FPS I get out of it is around 5 frames per second....It's capable of up to 30 though.
I tried recording a video through the quicktime player in high definition. It defaulted to 1600x1200, and I still only 5fps. So my guess is that iChat is using the highest resolution setting and scaling it down to 320x240.
Any ideas?

I just bought this camera from Best Buy for my mother for Christmas.
I tried it out on my PM G5 (which already has an iSight plugged in) and I was BLOWN AWAY by the picture quality as my wife and I tested out the iChat AV video chat features with this and my MacBook's built in iSight.
So next I tried it out on my iBook 900mhz G3. Making sure that I was up to 10.4.11, I plugged it in andI thought everything was good.... at first. I got a picture but it was much smaller and surrounded by a black border. When I initiated a video chat that's where I saw a problem with the webcam connected to a G3 iBook. Whenever there was any motion on the cam we got a lot of pink horizontal distortion bars on screen. After pondering it I firmly believe it has to do with the G3 processor. When I hook it up to my mother's G4 eMac, I will let you guys know if that fixed it. Granted if you think about it, back when iChat AV first came out, in 2003 you could hook up a digital camcorder to a G4 but not a G3 and use that as your web cam.
But to all those out there that maybe are graphics pros with Power Mac G5's or Mac Pro's and need a web cam, I have to recommend this camera! My wife and I are seriously thinking about putting our iSight up on eBay and getting the going rate of $200 for it and replacing it with one of these Pro 9000's. Not a bad investment in 2003 when I bought it though huh?!

Qosmio G20: Logitech quickcam driver doubles all media speed

When I install the Quickcam Fusion driver on my Qosmio G20, the weirdest thing happens...
All the sounds/video on the computer (music, mic, video, etc.) seems to get doubled in playing speed, how in the world is this possible??
Is the Quickcam Fusion driver not compatible with the G20?? Something must have gone completely wrong.
It all fixes itself when I remove the cam driver again...
I really need help with this one!

It looks like the quickcam driver cased this very strange behavior
Why you dont contact the cam manufacture and ask for the support.
Maybe the guys know more about this problem and offers any driver updates or quickfixes.

Logitech Quickcam Messenger no dice

So I have this logitech quickcam messenger, and suprise, its not working.
Anyway, i plug it in (USB), and several modules load, /dev/video0 is created, but other than that, no functionality.
Mostly when i try to run any video app I get (running motion):
[1] Failed to open video device /dev/video0: Device or resource busy
I can run cat /dev/video0 and get a lot of output streaming out, so thats a good sign. But I wonder is the device really busy or is the driver screwed up?
I'm using the quickcam_messenger module that autoloads when i plug it in.
I've also tried qcmessenger and gspca_zc3xx modules to no avail.
output of lsmod:
Module Size Used by
quickcam_messenger 14480 0
usbvideo 24196 1 quickcam_messenger
compat_ioctl32 8960 1 usbvideo
videodev 33920 2 usbvideo,compat_ioctl32
v4l1_compat 13828 1 videodev
it87 24216 0
hwmon_vid 3712 1 it87
ext3 122128 1
jbd 48552 1 ext3
mbcache 8708 1 ext3
xfs 473616 1
joydev 12784 0
snd_usb_audio 89392 0
snd_usb_lib 16896 1 snd_usb_audio
snd_rawmidi 21408 1 snd_usb_lib
usbhid 43344 0
hid 33412 1 usbhid
ff_memless 6024 1 usbhid
running standard arch kernel 2.6.27 and yes my user is in the video group
I've searched google quite a bit and i've run out of ideas...so any help would be much appreciated!
Last edited by Evanlec (2008-10-30 00:24:18)

Old topic, but case is up to date.
I was struggling with my own older Logitech camera Quickcam Pro. Apparently I bought the wrong one, but finally I set it up with limited functionality.
Of course the problem was the driver. No pwc, no linux-uvc and not even spca5xx. I had to compile new driver module with nw802. Actually mine was nw801, but I just had to edit one file before compilation, apply some patches, insert this module and now it works.
Please do some researches and specify correct driver for your webcam using ProductID. Logitech webcams have varied set of drivers. :-)

Logitech Quickcam Fusion

Similar Messages

Maybe you are looking for