Logitech Quickcam Pro 9000 not available for use in iMovie 08

I have a Logitech Quickcam pro 9000 which works great in ichat, and skype. I can record with it using Quicktime (although the framerate really is slow) but for some reason the camera is not available in the pick list when I click on the camera icon in imovie 08. Is this a bug? Should imovie 08 be able to detect my camera?
thanks!

I pluged it in with out driver and it worked. Both on skype and ichat

Similar Messages

  • Logitech Quickcam Pro 9000

    Logitech Quickcam Pro 9000
    This is a great cam, and now supported through the use of the UVC standard, but the most FPS I get out of it is around 5 frames per second....It's capable of up to 30 though.
    I tried recording a video through the quicktime player in high definition. It defaulted to 1600x1200, and I still only 5fps. So my guess is that iChat is using the highest resolution setting and scaling it down to 320x240.
    Any ideas?

    I just bought this camera from Best Buy for my mother for Christmas.
    I tried it out on my PM G5 (which already has an iSight plugged in) and I was BLOWN AWAY by the picture quality as my wife and I tested out the iChat AV video chat features with this and my MacBook's built in iSight.
    So next I tried it out on my iBook 900mhz G3. Making sure that I was up to 10.4.11, I plugged it in andI thought everything was good.... at first. I got a picture but it was much smaller and surrounded by a black border. When I initiated a video chat that's where I saw a problem with the webcam connected to a G3 iBook. Whenever there was any motion on the cam we got a lot of pink horizontal distortion bars on screen. After pondering it I firmly believe it has to do with the G3 processor. When I hook it up to my mother's G4 eMac, I will let you guys know if that fixed it. Granted if you think about it, back when iChat AV first came out, in 2003 you could hook up a digital camcorder to a G4 but not a G3 and use that as your web cam.
    But to all those out there that maybe are graphics pros with Power Mac G5's or Mac Pro's and need a web cam, I have to recommend this camera! My wife and I are seriously thinking about putting our iSight up on eBay and getting the going rate of $200 for it and replacing it with one of these Pro 9000's. Not a bad investment in 2003 when I bought it though huh?!

  • Installation of Logitech QuickCam Pro 9000 on iBook G4 (MAC OS X 10.3.9)

    Hi iBook friends,
    I am writing from Munich, Germany. I just got my first webcam and I am a bit lost...
    I got the Logitech QuickCam Pro 9000 and I have no idea how to install it...
    Can somebody give me a hand?
    Thank you very much!

    Hi, this is a relatively good webcam but on a Mac, some of the features will not function without software. First of all, the software for this cam is written for PC only, but the camera will operate pretty well without it.
    You will need to upgrade to OS X 10.4.9 or higher, or download and install "ichatUSBCam" at this link... http://www.macupdate.com/info.php/id/12294
    10.4.9 and 10.4.10 will recognize the cam natively.
    All the cool features like snapshots, auto-focus, face tracking, etc... will not be available without the PC only software. I contacted Logitech about the auto-focus not working and they told me that the Pro 9000 has internal hardware that requires software control.
    I have found the focus to not be a problem as almost everything is in focus anyway.
    This cam is very sharp, very high resolution and auto-exposure and color balance seem to work great.
    Hope this helps,
    Pete

  • Logitech quickcam pro 9000 - it was bad, but I made it worse!

    Hi all,
    I just got the logitech quickcam pro 9000, which is made for windows. I plugged it in, unable to install the windows drivers, and it worked, but was very low quality, and was transmitting very few frames per second.
    Since I could not find and mac drivers for this version of this camera, I tired installing the drivers for the quickcam pro 4000. Now my camera seems even worse. When I try to bring it up in Skype it takes so long to load I force quit Skype just to get out of the Skype Preferences, and if I do bother to wait, it gives like one frame per 3 or 4 minutes. I tried uninstalling the quickcam pro 4000 drivers, but nothing seems to have changed.
    Does anyone know how I can get it back to normal? (Or even better, closer to what this camera actually has potential for as far as quality?)

    I pluged it in with out driver and it worked. Both on skype and ichat

  • This email address is not available for use as an Apple ID

    hi
    i had two apple accounts
    and just wanted to change the primary email address for the both with each other
    when i changed the first one my old email cant be used with other account then i tried replacing my old email it doesnt replace it says
    This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.
    please help me

    Yes,  I am having the same problem.  When I called apple they said that things were "tied up somehow" with another account that has a do different birthday than me.  Uuuuuhh?  So that means someone else can log in?... I have a feeling there is a big vulnerability with the three login options, just like with the current and past password retrieval. Apple had only suggested that I delete my current set up on my serviced and make a new ID and email.
    I Just got a new email and made a new Apple ID account For now. I was hoping the email would work itself out. I assumed If I could make sure everything was verified, not associated with another account, and try to get rid of the alternate id and second email option also used to sign in (seen in Apple ID management)  that could possibly be construed or mixed up with something else that it would eventually free up and become "available" again.  Unfortunately im still waiting In hopes in just needs to recognize the email isn't associated with anything.
    I have had a few major concerns with apple products lately especially with security. My iPhone 4s was hacked too. Some ******* was listening/recording and when I hooked to Internet he sent out the recorded portion that was available.  Talk about ****** up.

  • How to delete old account, I can't log in due to - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

    How to delete old account, I can't log in due to error - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

    All good, I loved with AppStore and now everything seems to be back to normal.

  • This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

    I want to change my apple id but get the message "This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.".  I try to log a call with apple support and I get a message like "cannot schedule a call".  That leaves me out of options.  Any ideas?

    Hi billfromwandering,
    I'm sorry to hear you are having these issues changing your Apple ID. It is correct that if an email address has been used previously for an Apple ID, it can not be used for a different Apple ID, as noted in this article:
    In most cases, your Apple ID is also the primary email address of your Apple ID account. You can change your Apple ID to any other email address you control, as long as it's not already in use as an Apple ID. If your email address ends with @icloud.com, @me.com, or @mac.com, it's already an Apple ID. 
    Change your Apple ID - Apple Support
    If you are certain that the email in question has never been used for an Apple ID and you are having issues contacting Apple Support regarding this issue, you may want to make sure you are going through the Apple ID support channel on the following page:
    Apple ID - Contact - Apple Support
    Regards,
    - Brenden

  • Photo Booth and Logitech QuickCam Pro 9000

    I had this working in Tiger 10.4.10 and I can get the camera to do video in iChat but not in photo booth (or iMovie). It just says camera off.
    Anyone have any ideas?
    Thanks,
    Jon

    I have a similar problem with my Creative Live! Video IM Pro. (VF0410). It is a UVC camera, and it works in iChat, but displays a very messed up image in Photo Booth and QuickTime Pro. This is on my PowerMac G4, running 10.5 (I just bought the camera, so I never tested it under Tiger)

  • After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

    After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
    If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
    This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
    See this document for details:
    "64-bit Windows required for After Effects and Premiere Pro CS6"
    In general, you can only download and use applications for which your computer system meets the minimum system requirements.
    Premiere Pro system requirements
    After Effects system requirements

    Who's says that Microsoft can't debug?
    I used msconfig, first disabling startup items, -same result.
    Enabled all startup items, disabled all non-microsoft services - AE worked!
    I re-enabled each service in turn until AE crashed.
    The fault was related to an item for a video streaming device I have in my house.  It was Monsoon-multimedia's Vulkano Service.  Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen.  It does load a couple of virtual devices in device manager, and uses a proprietary codec.
    I uninstalled the vulkano streamer application and rebooted the external Vulkano device.  I reinstalled the Vulkano and verified it connected to the device and could stream.  Once it did, I tried AE again and IT WORKED!
    I wonder if simply rebooting the Vulkano would have fixed it.  Its like opening the garage door to turn on the refridgerator.
    Thanks for the help!
    Jim

  • Flash Player for Leopard and QuickCam Pro 9000

    I am trying to use a LogiTech QuickCam Pro 9000 with a chat
    room that uses Adobe Flash Player, and I am running Leopard on my
    MacBook Pro. The Pro 9000 camera has much nicer quality than the
    Built-in iSight, and I can use it on a non-iSight equipped
    PowerBook as well.
    Is there anyway to make this work?
    Does Adobe have plans to add Flash Player support for the
    Logitech QuickCam Pro 9000 for Mac?

    Download the proper installer from http://forums.adobe.com/thread/909550

  • Using Logitech QuickCam Pro for Notebooks with Mac..

    Can I install the Logitech QuickCam Pro for Notebooks(new version) on my G4 Powerbook(OSX 4.11) ? I have read several posts from Mac people saying that this is possible BUT is there a CD included with the installation AND does that CD only work for the PC software ?
    Would like to know before purchasing....
    Thanks

    I read Logitech's data page on this cam but it does not mention anything about Mac compatible although the info I saw from some Mac people suggested that that might be some silent agreement between them and the PC people.....
    Here's the article I read under: http://www.ecamm.com/mac/ichatusbcam/configs.html scrolled down to the Logitech data and found this under the QuickCam Pro for Notebooks:
    Logitech QuickCam for NoteBooks PRO (New Version)
    Important Note: Logitech Compatibility Information
    The following Logitech QuickCams are currently available in two versions. Only the newer version is Mac-compatible (UVC compliant) (Unless otherwise noted.).
    * QuickCam for NoteBooks PRO
    * QuickCam Orbit MP/Sphere
    * QuickCam PRO 5000
    * QuickCam Ultra Vision
    * QuickCam Fusion
    Identifying the newer revision cameras:
    The new models are labeled with the "Works with Windows Vista" logo, and also feature "RightLight 2" as one of the features.
    Part Number (P/N): The compatible model/part numbers are listed on our camera guide. Unfortunately, the part number can only be found by opening the box.
    Logitech provides the following table showing the new vs. old camera models. The cameras marked as "UVC Supt" are Mac-compatible.
    Model: V-UAR38 861303-0000)
    PID: 0x08CB Built-in Driver (Requires Mac OS X 10.4.3 or higher)
    iUSBCam is not required for Mac OS X 10.4.9 or higher

  • JMF crashed with Logitech QuickCam Pro for Notebook using latest driver.

    JMF crashed with Logitech QuickCam Pro for Notebook using latest driver
    I can't register the webcam in JMF. WinXP crashed with Blue-screen-of-dead.
    The crash occurs on installation of JMF when the installer tries to detect my capture devices.
    Windows also crashes when i open the JMF Registry Editor and tell it to search for my capture devices.
    I use a QuickCam Pro for Notenooks with driver version 11.80.1065.0000 on Windows XP with JMF 2.1.1e.
    PS: I can use JMF to connect to other brand's webcam.
    So, how to solve it?

    So, how to solve it?JMF apparently doesn't work with that camera...so if you want to install JMF, you should unplug your Logitech cam. If that doesn't work, uninstall it.

  • Logitech quickcam pro for notebook (black)

    Does anybody know if logitech quickcam pro for notebooks work in mac osx 10.4.4?

     Mark offers the succinct version. I, on the other hand..... What a long answer I am going to give to such a simple question!
    As explained in iSight versus DV Camcorder or other web-cam, the answer to your question really depends upon the software you will use to drive the LOgitech QuickCam® for Notebooks Pro.
    Your Mac can use webcams for many different applications. To be certain of success, check the system requirements and list of supported cameras for the application(s?) you intend to use. If you still have questions, contact the application software developer and ask him directly.
    For instance, if you plan to use your webcam with iChat AV for video chat, you will see that Apple's Mac OS X 10.4: iChat AV system requirements call for a FireWire-based camera for video chat. However, a third party add-on called iChatUSBCam can allow the use of many USB cameras with iChat.
    QuickCam® for Notebooks Pro is listed as one of those supported cameras on iChatUSBCam's camera guidepage, provided you use an additional Driver available from one of the two sources linked there.
    If you have difficulty finding info about some other application, try searching Logitech's Product Support site for your camera choice and the Search Text "Mac" (without the quotation marks).
    The search at Logitech's Product Support may answer your question. For instance, I checked for iPhoto compatibility and found this Answer:"Only the Logitech Pocket Digital 130 will work with iPhoto. This is because the Pocket Digital 130 actually acts as a storage drive with images saved on it. Our other web cameras do not function like that. They stream the images through the camera but they don't store them.
    "To work around this, simply take a picture with your web camera and use our Quickcam software to save the picture to your system. You can then open the file in iPhoto and edit or use any other features to change the file."If you are still having difficulty, you can search Logitech's Product Support FAQs or their Knowledgebase, visit Logitech's own dedicated User Discussion Forums, or even email your question directly to Logitech for an official answer.

  • Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

    macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. 

    I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
    This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
    After making your backup try the following:
    Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
    Launch the App Store, click the "Store" menu, and sign in with your AppleID.
    Open the main page of the App Store and search for iPhoto.
    If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
    If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

  • Valid size not available for this creation when using Greeting Card feature

    Using PSE9 with a Mac.  When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
    "Valid Size Not Available For This Creation".  (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working).  I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result.  Has anyone else run into this problem, and if so have found a fix?  Thanks.

    I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
    That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
    Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
    Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
    Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
    Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
    Copy your Photoshop project files (and any folders) to your mac.
    Open the project files as you would with any other Photoshop file.
    You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
    If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
    Good luck.

Maybe you are looking for